Modified spectrophotometric method for the determination of traces of boron using quinalizarin in a sulfuric-acetic acid medium

Summary A modified spectrophotometric method for the determination of boron with quinalizarin in a sulfuric-acetic acid medium is proposed. The sensitivity of the method is 0.00037g/cm². The optimum concentration range is 0.06 to 0.25 ppm of boron.

---

Zusammenfassung Eine modifizierte spektrophotometrische Bestimmungsmethode für Bor mit Chinalizarin in schwefelsaurer-essigsaurer Lösung wurde vorgeschlagen. Deren Empfindlichkeit beträgt 0,00037g/cm². Das optimale Konzentrationsbereich liegt zwischen 0,01 und 0,25 ppm Bor.

     

Tautomerism of metal complexes with quinalizarin

The formation of complexes with quinalizarin was found to occur through the peri-hydroxycarbonyl groups with participation of tautomers and conformers. The diversity of the electronic absorption spectra of quinalizarin complexes is explained not only by the ligand ionization degree but also by the shifts in the tautomeric and conformer equilibria. The classification of the known quinalizarin complexes is suggested on the basis of spectrophotometric data and quantum-chemical calculations of the π _l ,π^*-band position by the Pariser-Parr-Pople method.     

Sulfonated 1-(2-pyridylazo)-2-naphthols and 2-(2-pyridylazo)-1-naphthols as spectrophotometric reagents: Determination of nickel

Three sulfonated 1-(2-pyridylazo)-2-naphthols and six sulfonated 2-(2-pyridylazo)-1-naphthols were synthesized, and their application to the spectrophotometric determination of metals was studied. The acidity constants of the reagents and the stability constants of the nickel chelates are reported, and the relationship between their properties and the position of the sulfonic acid group is discussed. 1-(2-Pyridylazo)-2-naphthol-6-sulfonic acid (PAN-6S) and 1-(2-pyridylazo)-2-naphthol-7-sulfonic acid (PAN-7S) are sensitive and selective reagents for nickel. The determination of nickel in the presence of cobalt with PAN-6S is described. Extraction of the chelate as the ion-pair with tetraphenylarsonium ions into chloroform is suitable for the determination of 1–10 μg Ni at 570 nm; the molar absorptivity is 56 000 l mol^-1 cm^-1, and interferences are easily avoided.     

Photometric determination of boron with oxazine derivatives

Eight oxazine derivatives were examined for their ability to form extractable complexes with boron fluoride. Brilliant cresyl blue, Capri blue and Nile blue form such complexes and can be used as sensitive photometric reagents for boron. Capri blue can even be more sensitive to boron than methylene blue.     

Spectrophotometric study of 1,2,5,8-tetrahydroxyanthraquinone-In(III) complex: Determination of In (III)

The 1,2,5,8-tetrahydroxyanthraquinone (quinalizarin) forms a colored complex with the ion In(III) in dimethylformamide-water solution. The 3:1 (R:In(III)) complex shows a λ_max of 565 nm and a molar absorptivity of 4.59 × 10⁴ liters mol^?1 cm^?1. A new method for the spectrophotometric determination of In(III) between 0.2 and 2.2 ppm with a relative error of 1.57% is proposed.     

Instrumental neutron activation analysis technique using subsecond radionuclides

The fast irradiation facility Mach-1 installed at the Danish DR 3 reactor has been used in boron determinations by means of Instrumental Neutron Activation Analysis using¹²B with 20-ms half-life. The performance characteristics of the system are presented and boron determinations of NBS standard reference materials as well as fertilizer materials are compared by literature value and spectrophotometric measurements, respectively. In both cases good agreement is obtained.     

Palladium(0)-catalyzed cis-selective alkylative and arylative cyclization of alkynyl enones with organoboron reagents

A palladium(0)-tricyclohexylphosphine catalyzes cis-selective alkylative and arylative cyclization of alkyne-containing electron-deficient alkenes with organoboron reagents to provide five- or six-membered rings with exo tri- or tetra-substituted alkenes. The opposite stereoselectivity to that for the alkyne-aldehyde cyclization using the same reagents would result from palladacycle-forming oxidative addition of the substrates to the Pd⁰ catalyst followed by transmetalation with the boron reagents, protonation, and reductive elimination. The functional group compatibility, availability, stability, and non-toxicity of the reagents, and the fact that no additives are needed make the process more practical than the Ni⁰-catalyzed cyclization with organozinc reagents.     

Automated method for the determination of boron in water by flow-injection analysis with in-line preconcentration and spectrophotometric detection

A sensitive, automated method for the determination of boron in water samples is described, involving flow injection with on-line ion-exchange preconcentration and spectrophotometric detection of the azomethine-H—boron complex. The method is applicable to various water samples and is free from interferences, even in coloured samples. Detection limits of 5 μg l^?1 at 20 samples h^?1 and 1 μg l^?1 at 10 samples h^?1 with relative standard deviations of < 10% at 1–10 μg l^?1 and < 5%at 10–200 μg l^?1 levels of boron were achieved. The recoveries for spiked natural water samples ranged from 96 to 101%. The method compares favourably with inductively coupled plasma atomic emission spectrometry.     

Synthesis and evaluation of some pyridyl-substituted pyrimidines as copper-specific chromogenic reagents

Preparation and metal-ion chromogenic properties of five new 2,4,6-trisubstituted pyrimidines containing pyridyl and methyl or phenyl groups are described. All five exhibit specific chromogenic reactions with copper(I), and two possess suitable characteristics for use as sensitive spectrophotometric copper reagents. The results obtained are also of interest in designing related chromogenic reagents.     

Sur la réaction colorimétrique de l'aluminium avec la quinalizarine

The reaction between aluminium and quinalizarin has been studied, and some modifications have been made to the analytical procedure usually followed.The absorption curve of the Al-quinalizarin compound and that of quinalizarin alone have been drawn. We applied the continuous variations method in order to determine the structure and composition of the reaction product. The spectrophotometric readings have shown that the constituents of the coloured compound are bound in a definite ratio. 2:3.     

1-(2,3,4-Trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as reagent for spectrophotometric determination of boron in plants

A highly sensitive and selective method has been developed for spectrophotometric determination of boron in plants, the method based on the color reaction of new reagent 1-(2,3,4-trihydroxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (THBA) with boron (III). In an ammonium acetate solution of pH 8.0, boron(III) reacts with THBA to form a 1:2 yellow complex which has a maximum absorption peak at 430 nm. The reaction can complete within 90 min and the absorbance of the complex remains maximum and almost constant at least for 24 h under a temperature range from 0 to 35 °C. The apparent molar absorptivity and Sandell's sensitivity are 2.95 × 10⁴ l mol⁻¹ cm⁻¹ and 0.00036 ng cm⁻², respectively. The limit of quantification, limit of detection and relative standard deviations were found to be 5.1, 1.5 ng ml⁻¹ and 1.12%, respectively. Under the optimum conditions, the absorbency of the complex (λ_max = 430 nm) increases linearly with concentration up to 0.8 μg ml⁻¹ of boron(III). The influences of foreign ions on the determination of boron were investigated in detail. Most of foreign ions can be tolerated in considerable amounts. Experiments have indicated that THBA as chromogenic reagent for spectrophotometric determination of boron has excellent analytical characteristics. Its sensitivity is more than 4.2-fold that of azomethine-H, and stability is advantage over other derivatives of azomehine-H remarkably. Moreover, the synthesis of THBA and its physicochemical properties of THBA were also investigated in detail. Proposed method has been applied to the determination of boron in plants with satisfactory results.     

Some new aromatic hydroxylamines as spectrophotometric reagents for vanadium

A comparative study is described of the use of N-benzoyi-o-tolyl-, N-benzoyl-m-tolyl, N-benzoyl-p-tolyl-, N-benzoyl-p-chlorophenyl- and N-phenylacetylphenyl-hydroxylamines, as spectrophotometric reagents for the determination of vanadium, after extraction with chloroform. All the reagents form 1:2 (metal:reagent) complexes in hydrochloric acid media or at pH 4.8–6.0; the dissociation constants of the complexes are of the order of 10^-9 and 10^-8, respectively, except those of N-benzoyl-p-chloro-phenylhydroxylamine which are of the order of 10^-8 in both media. The reactions in hydrochloric acid media are more selective and sensitive than those at pH 4.8–6.0. In presence of alcohol, the wavelengths of maximum absorption decrease. The pK_a values of the hydroxylamines were determined in water and in alcohol-water (1:1) solutions.     

Comparative studies of 1-hydroxy-2-pyridinethione and its methyl derivatives as analytical reagents for metal ions

Comparative analytical studies on sodium salt of 1-hydroxy-2-pyridinethione (HPT) and some of its methyl derivatives are made using them for selective determination of certain metal ions. Data on elemental analysis, melting point, color, and solubilities of precipitates, pK_a of reagents and their metal derivatives, absorption spectra are tabulated. It is found that methyl derivatives of (HPT) are more selective than the reagent itself in acidic and alkaline medium and have a higher sensitivity, of about 10–12%, more than HPT for the spectrophotometric determination of Fe(III) and Cu(II). Methyl substitutions of (HPT) are less acid and have lower solubilities in water than HPT. Further work on the introduction of a larger substituent in (HPT) ring is desirable. The 1:1 Ag-HPT complex, which is not light sensitive, can be used for gravimetric determination of Ag⁺ in the presence of chloride.     

1-(2-hydroxy-3-methoxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid as a reagent for the spectrophotometric determination of boron in ceramic materials

A sensitive and selective spectrophotometric method for the determination of boron is described. The method is based on the colour reaction between boron and the reagent 1-(2-hydroxy-3-methoxybenzylideneamino)-8-hydroxynaphthalene-3,6-disulfonic acid (HMOA). In a HOAc-NH4OAc buffer of pH 5.5, HMOA reacts with boron to form a 1:2 yellow complex with a maximum absorption at 423 nm. The absorbance (lambdamax = 423 nm) is linear up to 1.2 microg ml(-1) boron in aqueous solution with a repeatability (RSD) of 1.12%. The molar absorptivity and Sandell's sensitivity are 7.19 x 10(3) l mol(-1) cm(-1) and 0.0015 microg cm(-2), respectively. The limit of quantification and limit of detection were found to be 17.1 and 5.2 ng ml(-1), respectively. The interference of various ions was examined in detail. All the metal ions studied can be tolerated in considerable amounts; in particular, the tolerance limits of Fe, Al, Zn, Ca and Mg are superior to those of other reagents such as Azomethine-H and Azomethine-HR. The proposed method was applied to the determination of boron in ceramic materials with satisfactory results.     

A comparative study of some lanthanon chelates of alizarin complexan as reagents for fluoride

A study has been made of the comparative suitability of the cerium^III, lanthanum and praseodymium chelates of alizarin complexan as reagents for the spectrophotometric determination of microgram amounts of fluoride. The cerium^III reagent is most sensitive at pH < 4.5 and the lanthanum reagent at pH 5.0. An enhancement of sensitivity may be obtained for both reagents at pH 4.3 by addition of acetone to 25 % v/v, but the most sensitive means of determination is to use the lanthanum reagent in aqueous solution at pH 5.2 with measurement at 281 mμ. This procedure is 200% more sensitive than the standard method at 620 mμ.     

Extraction spectrophotometric method for determination of aluminium in silicates

A simple, rapid and sensitive method has been worked out for spectrophotometric determination of macro and micro amounts of alumina in ceramic raw materials and finished products, including glasses. The method is based on the extraction of aluminum oxinate into chloroform after masking of titanium with chromotropic acid and of iron with ascorbic acid and 1,10-phenanthroline or ferrocyanide at pH 5.2. The absorbance is measured at 385 nm. Interference by Cu, Zn, Cd, Ni and Co, when present, is overcome by stripping them as cyanide complexes by shaking the chloroform extract with potassium cyanide solution. Zr is masked with quinalizarin sulphonic acid and fluoride with BeSO(4).     

Production and purification of organic reagents labeled with radioisotopes produced by an accelerator

We studied the production of nine typical organic analytical reagents labeled with¹¹C,¹³N and¹⁸F by irradiation with charged particles and bremsstrahlung and the purification of labeled compounds with HPLC and sublimation. As a result, we found that six reagents, α-naphthol, β-naphthol, quinoline, α-nitroso-β-naphthol, 8-hydroxyquinoline, and 1,10-phenanthroline H₂O could be labeled with¹¹C by bombarding a mixture of each reagent and boron with protons. More than 10% of the¹¹C was successfully exchanged with carbon atoms in the original reagents. We also found that sublimation is useful for purifying 8-hydroxyquinoline labeled with¹¹C. The extraction property of¹¹C-labeled 8-hydroxyquinoline between water and chloroform could be easily monitored by radioactivity measurement.     

Different approaches to the determination of ammonium ions at low levels by flow injection analysis

Several flow-injection methods are examined critically for their suitability for determing submicromolar levels of ammonium ion on a routine basis. Nesslerization and the Berthelot reaction are not sufficiently sensitive. The gas-diffusion separation is more satisfactory. On the basis of a simple diffusion model, the effects of operating parameters on the ammonium concentration in the acceptor line of the gas-diffusion unit are discussed and experimentally verified. With the optimized gas-diffusion conditions, spectrophotometric detection with an acid-base indicator or the application of a liquid-membrane ammonium-sensitive electrode offers detection limits around 10 ^?8 mol 1^-1. Carbon dioxide interference in the acid-base indicator method causes problems with baseline stability and long-term drift. A severe limitation on futher enhancement of sensitivity by in-valve preconcentration is the contamination levelof ammonium present in water and reagents. Effective preconcentation (20-fold in 1 min) is obtained by using an ion-exchange microcolumn placed in the injection loop of the valve.     

Extraction—spectrophotometric determination of boron with 2,6-dihydroxybenzoic acid and 4-(4-diethyl-aminophenylazo)-n-methylpyridinium iodide,with application to steels

The sensitive and selective method reported is based on the reaction of boric acid with 2,6-dihydroxybenzoic acid in acidic aqueous solution to form a 1:2 complex anion which can be extracted into chloroform as an ion-pair with 4-(4-diethylaminophenylazo)-N-methylpyridinium ion. The ion-pair formed by the excess of reagents and co-extracted into chloroform, is removed by washing the organic phase with phosphate buffer solution (pH 7.0) and 0.025 M sulfuric acid solution. The absorbance of azo dye in chloroform is measured at 570 nm. Calibration graphs are linear in the range 0–1.5 × 10^-5 M of boron. The molar absorptivity is 6.6 × 10⁴ l mol^-1 cm^-1 and the absorbance of the reagent blank is 0.030. The method was applied to the determination of boron at the 0.001% level in steels.     

State of Polymethine (Styryl and Carbocyanine) Indolium Derivatives in Aqueous Solution and Their Analytical Properties

The state of new polymethine (styryl and carbocyanine) 1,3,3-trimethyl-3H-indolium derivatives in aqueous solutions have been studied by spectrophotometry. Depending on the acidity, the reagents can occur in the ionic (singly (R⁺) or doubly (HR²⁺) charged) or the hydrolyzed (ROH) state. The main spectrophotometric characteristics and protolysis constants of the reagents have been calculated. A possible mechanism of protolytic transformations in solutions of polymethine reagents is proposed based on quantum-chemical calculations of charge distributions in their molecules and on electron and ¹H NMR spectroscopy data. The results demonstrate the advisability of using polymethine compounds as efficient analytical reagents.