原子荧光光谱法测定煤中砷含量

主要研究了原子荧光光谱法测定煤中砷含量的方法,该法回收率为(95.75~98.34)%,RSD2.36%。通过与砷钼蓝分光光度法测定煤中砷含量比较,和对该法的精密度和准确度进行探讨,结果表明,该法操作简单,快速,灵敏度高,测定砷浓度范围大,适用于煤中砷含量测定。     

Electrochemical methods for the determination of total arsenic and arsenic compounds

The determination of total arsenic and of arsenic compounds in biological and inorganic samples is a task frequently encountered by analysts. Several elecrochemical methods have been developed for the determination of total arsenic (generally after mineralization of the sample), arsenite, arsenate, methylarsonic acid and dimethylarsinic acid. The electrochemical behavior of several other organic arsenic compounds was also studied. This paper reviews these electrochemical methods, their application to environmental samples, and the problems encountered in the electrochemical determination of arsenic and arsenic compounds.     

次亚磷酸钠分离-重铬酸钾容量法测定钨尾矿中砷含量

选矿中产生的钨尾矿长期堆放,经过雨水冲刷,钨尾矿中的砷会进入到水土中,造成环境污染,准确测定钨尾矿中砷含量,利于监测钨尾矿中砷对环境的污染程度。采用硝酸-氯酸钾饱和溶液和氟化铵溶液分解样品,再用硫酸溶液冒烟赶尽硝酸,在盐酸介质中,以硫酸铜为催化剂,用次亚磷酸钠将砷离子还原成元素态,析出的砷过滤分离,除去其他杂质。在硫酸溶液中,用过量的重铬酸钾标准溶液滴定溶解单质砷,过量的重铬酸钾以二苯胺磺酸钠为指示剂,用硫酸亚铁标准溶液反滴定。通过优化样品溶解条件和砷沉淀还原条件,建立了次亚磷酸钠分离-重铬酸钾容量法测定钨尾矿中砷含量的分析方法。通过测定滤液中的砷含量,考察了滤液中砷含量对砷测定结果的影响,可忽略不计,表明实验中砷沉淀完全。通过沉淀单质砷,过滤使砷与杂质元素分离,消除了杂质元素对砷测定的影响。运用重铬酸钾容量法测定3个钨尾矿样品中的砷,并进行加标回收实验,测定结果的相对标准偏差（RSD,n=11）在0.14%～2.1%,加标回收率在97%～101%。方法操作简单、精密度高,适合钨尾矿中高含量砷的测定,测定结果与碱融分离-碘量法结果基本一致。     

Analysis and speciation of arsenic by stripping potentiometry: a review

This paper provides a review that summarizes several examples of the literature from 1980 to 2003, to illustrate the applications of stripping potentiometry for the determination and speciation of arsenic in several samples. A discussion on the main advantages of stripping potentiometry in comparison with other electrochemical methods employed for arsenic determination is presented. Special attention is devoted to stripping modes (constant current or chemical stripping) and to issues related to the choice of working electrodes and supporting electrolyte. This approach has been also applied at arsenic determination in flow systems. A section is dedicated to speciation of arsenic and total arsenic determination and other to analytical characteristic of method and their interferences. An extensive compilation, organize by experimental and analytical parameters and real sample studied is presented.     

Application of hydride generation to the determination of trace concentrations of arsenic by inductively-coupled plasma atomic emission spectrometry

A method is described for the determination of traces of arsenic, based on sodium tetrahydroborate reduction of arsenic and introduction of the arsine formed to a relatively low-powered (1.6 kW) inductively-coupled plasma where the arsenic atomic emission is generated, Inter-element interference effects are described; many can be eliminated by addition of potassium iodide to the sample solutions, but the standard additions method is recommended for accurate arsenic determination. Potassium iodide is also used for prereducing arsenic(V) to arsenic(III). The method has a detection limit of 0.1 ng As ml^-1 and the linear calibration range spans nearly four orders of magnitude. The proposed method is applied to the determination of ng ml^-1 levels of arsenic in waste waters.     

离子色谱法测定青霉素残渣中砷的研究

对离子色谱法测定砷及其淋洗条件进行了考察，排除了大量无机阴离子对砷测定的干扰，并应用该法于青霉素残渣中Ａｓ（Ⅴ）的测定。结果表明该法的分离度、重现性、线性响应方面均满足定量分析要求，结果令人满意。     

Determination of trace amounts of arsenic using a capacitively coupled microwave plasma combined with hydride generation: applications to sewage sludge,iron and steels

A capacitively coupled microwave plasma (CMP) combined with an arsine generation system for the determination of trace amounts of arsenic is described. Factors affecting the spectral intensity of As 228.8 nm in the CMP were examined, and optimal working conditions for the determination of arsenic were established. A sensitive, precise and practical method for the determination of arsenic in sewage sludge, iron and steels was elaborated.     

Direct Determination of Arsenic in Natural Gasoline and Gas Condensate by Graphite Furnace Atomic Absorption Spectrometry Using an in situ Absorption Technique

Because arsenic poison catalysts during process operations and also is an environmental contaminant, the determination of total arsenic in natural gasoline, gas condensate and its products is of primary concern. Many methods available for the determination of arsenic require sample pretreatment and subsequent analysis on an aqueous matrix. Unfortunately, those methods could not get a satisfactory result because natural gasoline, gas condensate and its products may contain a variety of organic arsenic compounds which have lower boiling point than inorganic arsenic.     

用原子荧光法测定食品中总砷的经验介绍

由于氢化物原子荧光法具有方法简单、精密度好、灵敏度高、线性范围宽等优点,已在土壤、食品、化妆品等砷含量的测定中得到广泛应用.对该法测定食品总砷过程中还原剂与砷标准的反应时间与荧光强度值之间的关系进行了探讨,得出其最佳反应时间.     

Arsenic speciation in solid biological specimens by temperature-controlled pyrolysis and NAA

A pyrolysis-neutron activation analysis (NAA) procedure has been developed and applied to the speciation of arsenic in solid biological samples. The method involves the retention of the inorganic arsenic in the pyrolysis boat by the addition of NaOH, the volatilization and trapping of the organic arsenic on a cation exchange resin and the subsequent NAA of the resin for the determination of the trapped arsenic. The method, developed with the aid of radiochemically labelled arsenic compounds, has been applied to the determination of the ratio of inorganic to organic arsenic species in commercical shrimps as well as in NBS standard reference materials such as oysters and orchard leaves. The results show different relative amounts of inorganic arsenic content in the samples analysed. In the shrings the fraction of inorganic arsenic was of the order of 20%, in the oysters the inorganic arsenic consfituted 60% of the total arsenic concentration while in the samples of vegetable origin more than 98% of the arsenic was of inorganic nature.     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

Evolved-gas zeeman flame atomic absorption spectrometry for the determination of arsenic compounds

An evolved-gas separation/flame Zeeman atomic absorption spectrometric approach is demonstrated for the speciation and determination of arsenic in oyster tissue. No digestion is needed and separation of inorganic arsenic compounds having similar boiling points is achieved. A stoichiometric or air-rich acetylene/air flame for atomic absorption spectrometry is not generally suitable for arsenic determination because of severe ultraviolet absorption interference at 193.7 nm and low sensitivity; polarized flame Zeeman atomic absorption spectrophotometry with a fuel-rich flame is suitable for the detection of traces of arsenic. The evolved-gas separation/Zeeman atomic absorption approach is simple, based on commercially available instrumentation, and useful for the selective determination of major arsenic compounds. Data are given to demonstrate optimal conditions and to show application to oyster tissue.     

Arsenic speciation analysis

Nearly two dozen arsenic species are present in the environmental and biological systems. Differences in their toxicity, biochemical and environmental behaviors require the determination of these individual arsenic species. Considerable analytical progresses have been made toward arsenic speciation analysis over the last decade. Hyphenated techniques involving a highly efficient separation and a highly sensitive detection have become the techniques of choice. Methods based on high-performance liquid chromatography separation with inductively coupled plasma mass spectrometry, hydride generation atomic spectrometry, and electrospray mass spectrometry detection have been shown most useful for arsenic speciation in environmental and biological matrices. These hyphenated techniques have resulted in the determination of new arsenic species, contributing to a better understanding of arsenic metabolism and biogeochemical cycling. Methods for extracting arsenic species from solid samples and for stabilizing arsenic species in solutions are required for obtaining reliable arsenic speciation information.     

A chemical enhancement method for the spectrophotometric determination of trace amounts of arsenic

A highly sensitive spectrophotometric method for the determination of 0.03-1.0 microg of arsenic is described. After extraction as AsI(3) into benzene, it is selectively stripped into water. Both the arsenic(III) and iodide present in the aqueous phase are made to react with iodate in acidic medium in the presence of chloride to form the anionic chloro complex, ICl(-)(2). The determination is completed after extraction of ICl(-)(2) species as an ion-pair with Rhodamine 6G into benzene and measuring the absorption of the extract at 535 nm. The coefficient of variation is 1.5% for 10 determinations of 0.5 microg of arsenic. The method has been applied to the determination of arsenic content in plant materials, high purity iron, copper base alloys and inorganic arsenic levels of natural waters.     

顺序注射氢化物发生-原子荧光光谱法同时测定中草药中As和Bi

建立了一种顺序注射氢化物发生-原子荧光光谱法同时测定中草药中的As和Bi含量的方法,考察了光电倍增管负高压、As和Bi灯电流、原子化器高度、载气流量、屏蔽气流量等因素对测定结果的影响。结果表明,载流HCl的浓度为0.3 mol/L,KBH4质量浓度为10 g/L时,同时测定As和Bi的效果最佳;在最佳实验条件下,As和Bi的检出限分别为0.058μg/L和0.006μg/L,加标回收率为94.6%~103.2%,相对标准偏差小于3.0%,中草药试样中共存的离子对As和Bi的测定没有干扰。该法操作方便、快速,用于中草药中As和Bi的同时测定,具有很好的可行性和实用性。     

Neutron activation analysis of arsenic in rocks and sediments by direct evolution with chloride- and bromide-condensed phosphoric acid reagents

A simple method is presented for the determination of arsenic in rocks and in sediments by neutron activation. After irradiating a sample it is, without any other treatment, directly heated in condensed phosphoric acid containing sodium chloride or sodium bromide to evolve arsenic as arsenic(III) chloride or bromide. The distillate is absorbed in distilled water, in which arsenic is later precipitated in elementary form by adding hypophosphite to the solution. From arsenite, arsenic(III) oxide, arsenate and arsenic(III) sulphide, arsenic chloride can be evolved with NaCl-CPA reagent, but elementary arsenic and arsenic(V) oxide do not react with it. However, metallic arsenic is found to react with KIO₃-NaCl-CPA and arsenic(V) oxide with the NaBr-CPA, both both evolving arsenic(III) chloride or bromide. Therefore, successive distillations, the first with NaCl-CPA and the second with NaBr-CPA, give a satisfactory means of differential determination of arsenic(III) and arsenate as well as arsenic(V) oxide. For the elementary arsenic a problem still now remains. The chemical recovery of carrier goes well beyond 95%. Part of this work was performed at the Research Reactor Institute, Kyoto University.     

Speciation of Arsenic Compounds in the Urine of Rats Orally Exposed to Dimethylarsinic Acid Ion Chromatography with ICP–MS as an Element-Selective Detector

A combined ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP—MS) system as an element-selective detector has been used for the determination of arsenic compounds. Seven arsenic compounds were separated by cation-exchange chromatography. Subsequently, the separated arsenic compounds were directly introduced into the ICP—MS and were detected at m/z =75. Detection limits for the seven arsenic compounds ranged from 0.8 to 3.8 μg As/l. The IC–ICP–MS system was applied to the determination of arsenic compounds in the urine of dimethylarsinic acid (DMAA)-exposed rats. DMAA was the most abundant arsenic compound detected. Arsenous acid, monomethylarsonic acid and trimethylarsine oxide were also detected.     

Simultaneous determination of phosphorus. arsenic and germanium and the separation of silicon and arsenic by solvent extraction

A simple, rapid, accurate and reliable method for the simultaneous determination of phosphorus, arsenic and germanium as their heteropoly blue complexes is reported. The method involves selective extraction of phosphomolybdic acid at pH 1.0-0.8, and selective extraction of germanomolybdic acid by isooctyl alcohol at pH 0.4, followed by back-extraction of the germanomolybdic acid with water, and reduction of arsenomolybdic acid in the remaining aqueous phase. A rapid and reliable method is also reported for the simultaneous determination of arsenic and silicon by selective extraction of silicomolybdic acid with isooctyl alcohol at pH < 0.4 and the back-extraction of the silicomolybdic acid with water; arsenic is determined in the remaining aqueous phase. The procedure can be applied to the simultaneous determination of phosphorus, arsenic and silicon.     

氢化物发生-分光光度法连续测定砷和铅

本文提出了以氢化物与硝酸银反应为基础的在一份试样溶液中连续测定微量砷和铅的分光光度法。利用硝酸银-聚乙烯醇-乙醇溶液吸收砷化氢显色测定砷,硝酸银-明胶-乙醇溶液吸收铅化氢显色测定铅。方法灵敏快速,通过稀释有色吸收液可测定砷与铅含量相差较大的样品。应用于沉积物和土壤中砷和铅的分析,获得满意的结果。     

Selective determination of trace arsenic and antimony species in natural waters by gas chromatography with a photoionization detector

Traces amounts of arsenic and antimony in water samples were determined by gas chromatography with a photoionization detector after liquidnitrogen cold trapping of their hydrides. The sample solution was treated with sodium hydroborate (NaBH₄) under weak-acid conditions for arsenic(III) and antimony(III) determination, and under strong-acid conditions for arsenic(III+V) and antimony(III+V) determination. Large amounts of carbon dioxide (CO₂) and water vapor obscured determination of arsine and stibine. Better separation from interference could be achieved by removing CO₂ and water vapor in two tubes containing sodium hydroxide pellets and calcium chloride, respectively. The detection limits of this method were 1.8 ng dm^?3 for arsenic and 9.4 ng dm^?3 for antimony in the case of 100-cm³ sample volumes. Therefore, it is suitable for determination of trace arsenic and antimony in natural waters.