1‐Butyl‐3‐methylimidazolium Hydrogen Sulfate [Bmim]HSO4: An Efficient Reusable Acidic Ionic Liquid for the Synthesis of 1,8‐Dioxo‐Octahydroxanthenes

1‐Butyl‐3‐methylimidazolium hydrogen sulfate [bmim]HSO₄ as an acidic ionic liquid was prepared and used as a catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthenes in excellent yields and short reaction times at 80 °C. The ionic liquid was easily separated from the reaction mixture by water extraction and was recycled four times without any loss in activity.     

Solvent‐free Synthesis of 1,8‐Dioxo‐octahydroxanthenes and Tetra‐hydrobenzo[a]xanthene‐11‐ones over Poly(N,N′‐dibromo‐N‐ethylnaphtyl‐2,7‐sulfonamide)

In this work, poly(N,N ′‐dibromo‐N ‐ethylnaphtyl‐2,7‐sulfonamide) (PDNES ) as a highly efficient catalyst was applied for the synthesis of 1,8‐dioxo‐octahydroxanthenes and tetra‐hydrobenzo[a]xanthene‐11‐ones under neutral and solvent‐free conditions.     

ZrOCl2·8H2O: a highly efficient catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthene derivatives under solvent‐free conditions

ZrOCl₂·8H₂O has been found to be an efficient catalyst for the synthesis of 1,8‐dioxo‐octahydroxanthenes from aldehydes and 5,5‐dimethylcyclohexane‐1,3‐dione under solvent‐free conditions. Copyright © 2009 John Wiley & Sons, Ltd.     

Novel CuFe2O4@SiO2‐OP2O5H magnetic nanoparticles: Preparation,characterization and first catalytic application to the synthesis of 1,8‐dioxo‐octahydroxanthenes

New functionalized magnetic core–shell nanoparticles, CuFe₂O₄@SiO₂‐OP₂O₅H, were prepared by grafting of phosphorus pentoxide on CuFe₂O₄@SiO₂ nanoparticles and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma optical emission spectrometry and vibrating sample magnetometry. The catalytic activity of CuFe₂O₄@SiO₂‐OP₂O₅H as a novel catalyst was evaluated in the synthesis of 1,8‐dioxo‐octahydroxanthenes under solvent‐free conditions. The results showed that the catalyst has high activity and the desired products are obtained in high yields within short reaction times. The catalyst is readily recovered using magnetic decantation and can be used at least four times without noticeable deterioration in catalytic activity.     

Synthesis of 10‐amino‐9‐aryl‐2,3,4,5,6,7,9,10‐octahydroacridine‐1,8‐dione derivatives

A series of novel 10‐amino‐9‐aryl‐2,3,4,5,6,7,9,10‐octahydroacridine‐1,8‐dione derivatives 4 were synthesized by hydrazine or phenylhydrazine and 9‐aryl‐1,8‐dioxo‐2,3,4,5,6,7,9‐heptahydroxanthene derivatives 3 , which were prepared by 5‐substituted‐1,3‐cyclohexanedione 1 and aromatic aldehydes 2 in the presence of concentrated H₂SO₄ as a catalyst in water. The structures of all compounds were characterized by IR, MS, ¹H‐NMR, and elemental analysis, and the title compounds possess good fluorescence properties. J. Heterocyclic Chem., (2012).     

Water‐induced pseudo‐quadruple hydrogen‐bonding motifs in xanthine–inorganic acid complexes

In xanthinium nitrate hydrate [systematic name: 2,6‐dioxo‐1,2,3,6‐tetrahydro‐9H‐purin‐7‐ium nitrate monohydrate], C₅H₅N₄O₂⁺·NO₃⁻·H₂O, (I), and xanthinium hydrogen sulfate hydrate [systematic name: 2,6‐dioxo‐1,2,3,6‐tetrahydro‐9H‐purin‐7‐ium hydrogen sulfate monohydrate], C₅H₅N₄O₂⁺·HSO₄⁻·H₂O, (II), the xanthine molecules are protonated at the imine N atom with the transfer of an H atom from the inorganic acid. The asymmetric unit of (I) contains a xanthinium cation, a nitrate anion and one water molecule, while that of (II) contains two crystallographically independent xanthinium cations, two hydrogen sulfate anions and two water molecules. A pseudo‐quadruple hydrogen‐bonding motif is formed between the xanthinium cations and the water molecules via N—H...O and O—H...O hydrogen bonds in both structures, and leads to the formation of one‐dimensional polymeric tapes. These cation–water tapes are further connected by the respective anions and aggregate into two‐dimensional hydrogen‐bonded sheets in (I) and three‐dimensional arrangements in (II).     

7‐Methoxy‐2,3‐dioxo‐1,4‐dihydroquinoxalin‐6‐aminium chloride monohydrate

Single crystals of the title compound, C₉H₁₀N₃O₃⁺·Cl⁻·H₂O, were obtained by recrystallization from hydrochloric acid. The cations stack along the crystallographic a direction. The 2,3‐dioxo‐1,4‐dihydroquinoxaline group shows a significant deviation from planarity [r.m.s. deviation from the best plane = 0.063 (2) Å]. Hydrogen bonding links the cations, chloride anions and water molecules to form an extended three‐dimensional architecture.     

Improved Synthesis of 2,2‐Arylmethylene Bis(3‐hydroxy‐5,5‐dimethyl‐2‐cyclohexene‐1‐one) and 1,8‐Dioxo‐octahydroxanthene Derivatives Catalyzed by Electrogenerated Base and Sulfuric Acid

An efficient method has been developed for the synthesis of 1,8‐dioxo‐octahydroxanthene derivatives in two‐step. In the first step, the electrogenerated base (EGB) catalyzed multicomponent transformation of dimedone and aromatic aldehydes in an undivided cell in the presence of sodium bromide as an electrolyte into 2,2′‐arylmethylene bis(3‐hydroxy‐5,5‐dimethyl‐2‐cyclohexene‐1‐one) at room temperature. In the second step, H₂SO₄ was employed as a dehydrating reagent for the cyclization process to give symmetrical heterocycles 1,8‐dioxo‐octahydroxanthene derivatives. Short reaction time, convenient work up, and using of inexpensive reagents, simple equipment, novel and eco‐friendly procedure make this strategy more useful for the preparation of xanthene derivatives.     

Tetraphosphine/palladium‐catalyzed Suzuki–Miyaura coupling of heteroaryl halides with 3‐pyridine‐ and 3‐thiopheneboronic acid: an efficient catalyst for the formation of biheteroaryls

An easily prepared tetraphosphine N,N,N′,N′‐tetra(diphenylphosphinomethyl)‐1,2‐ethylenediamine (L1) associated with [Pd(η³‐C₃H₅)Cl]₂ affords an efficient catalyst for Suzuki–Miyaura coupling of 3‐pyridineboronic acid with heteroaryl bromides. Reaction could be performed with as little as 0.02 mol% catalyst and a high turnover number of 2500 is obtained. A wide range of substrates is investigated with satisfactory yields, and good compatibility with aminogroup‐substituted pyridines and unprotected indole is exhibited. This protocol can also be applied successfully to the reaction of heteroaryl bromides with 3‐thiopheneboronic acid. This Pd‐tetraphosphine catalyst efficiently restrains the poisoning effect from heteroaryls, and shows good stability and longevity. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of new complexes of the type [Ru(CO)2Cl2 (2‐phenyl‐1,8‐naphthyridine‐kN) (2‐phenyl‐1,8‐naphthyridine‐kN′)]. Preliminary applications in homogeneous catalysis

Novel ruthenium (II) complexes were prepared containing 2‐phenyl‐1,8‐naphthyridine derivatives. The coordination modes of these ligands were modified by addition of coordinating solvents such as water into the ethanolic reaction media. Under these conditions 1,8‐naphthyridine (napy) moieties act as monodentade ligands forming unusual [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] complexes. The reaction was reproducible when different 2‐phenyl‐1,8‐naphthyridine derivatives were used. On the other hand, when dry ethanol was used as the solvent we obtained complexes with napy moieties acting as a chelating ligand. The structures proposed for these complexes were supported by NMR spectra, and the presence of two ligands in the [Ru(CO)₂Cl₂(η¹‐2‐phenyl‐1,8‐naphthyridine‐ kN )(η¹‐2‐phenyl‐1,8‐naphthyridine‐kN′)] type complexes was confirmed using elemental analysis. All complexes were tested as catalysts in the hydroformylation of styrene showing moderate activity in N,N′‐dimethylformamide. Copyright © 2008 John Wiley & Sons, Ltd.     

N‐(2‐Bromoethyl)‐4‐piperidino‐1,8‐naphthalimide and N‐(3‐bromopropyl)‐4‐piperidino‐1,8‐naphthalimide

N‐(2‐Bromoethyl)‐4‐piperidino‐1,8‐naphthalimide, C₁₉H₁₉BrN₂O₂, (I), and N‐(3‐bromopropyl)‐4‐piperidino‐1,8‐naphthalimide, C₂₀H₂₁BrN₂O₂, (II), are an homologous pair of 1,8‐naphthalimide derivatives. The naphthalimide units are planar and each piperidine substituent adopts a chair conformation. This study emphasizes the importance of π‐stacking interactions, often augmented by other contacts, in determining the crystal structures of 1,8‐naphthalimide derivatives.     

An Efficient Solvent Free Synthesis of 1,8-Dioxo-octahydroxanthene Using p-Toluene Sulfonic Acid

A simple and efficient method for the synthesis of 1,8‐dioxo‐octahydroxanthene by using p‐toluenesulfonic acid as a catalyst under solvent free conditions is described, which involves cyclization of 2,2‐arylmethylenebis(3‐hydroxy‐5,5‐dimethyl‐2‐cyclohexene‐1‐one) that was obtained firstly by the reaction of dimedone with aromatic aldehydes in water as solvent and catalyst at room temperature. The experimental procedures in the two steps are very simple and the products are formed in excellent yields.     

Kinetics of hexene‐1 polymerization using [(N,N′‐diisopropylbenzene)‐2,3‐(1,8‐napthyl)‐1,4‐diazabutadiene] dibromonickel/methylaluminoxane catalyst system

Kinetics of hexene‐1 polymerization was investigated using [(N,N′‐diisopropylbenzene)2,3‐(1,8‐napthly)‐1,4‐diazabutadiene]dibromonickel/methylaluminoxane catalyst. Experiments were performed at varying catalyst and monomer concentrations in the temperature range of ?10 to 35 °C. First order time‐conversion plot shows a downward curvature at temperatures of 20 °C and 35 °C indicating the presence of finite termination reactions. A nonlinear plot of degree of polymerization (P_n) with respect to conversion indicates occurrence of transfer reactions and slow initiation. The experimental molar masses are higher than predicted, which implies that a fraction of catalyst species could not be activated or is deactivated at the early stages of the reactions. The efficiency of the catalyst (Cat_eff) varies from 0.77 to 0.89. The observed polydispersity of the poly(hexene‐1) s is in the range of 1.18–1.48. The reaction order was found to be 1.11 with respect to catalyst. The Arrhenius plot obtained using the overall propagation rate constant, k_p, at five different temperatures (?10, 0, 10, 20, and 35 °C) was found to be linear with an activation energy, E_a = 4.3 kcal/mol. Based on the results presented it is concluded that the polymerization of hexene‐1 under the above‐mentioned conditions shows significant deviation from ideal “living” behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1093–1100, 2007     

Nano‐TiO2 as an Efficient Catalyst for Tandem Knoevenagel–Michael‐Cyclocondensation Reaction of Dimedone with Aromatic Aldehydes and Ammonium Acetate or Aromatic Amines under Solvent‐free Conditions

TiO₂ nanoparticles in anatase and rutile forms was characterized and studied by several techniques including X‐ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and successfully applied as an efficient and heterogeneous catalyst in the synthesis of 1,8‐dioxo‐decahydroacridines via the one‐pot multi‐component condensation reaction of dimedone with aromatic aldehydes and ammonium acetate or aromatic amines under mild and solvent‐free conditions.     

Ethyl 1,4‐Dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylates by a Tandem SNAr‐Addition‐Elimination Reaction

A series of N‐substituted 1,4‐dihydro‐4‐oxo‐1,8‐naphthyridine‐3‐carboxylate esters has been prepared in two steps from ethyl 2‐(2‐chloronicotinoyl)acetate. Treatment of the β‐ketoester with N,N‐dimethylformamide dimethyl acetal in N,N‐dimethylformamide (DMF) gave a 95% yield of the 2‐dimethylaminomethylene derivative. Subsequent reaction of this β‐enaminone with primary amines in DMF at 120^oC for 24 h then afforded the target compounds in 47–82% yields by a tandem S_NAr‐addition‐elimination reaction. Synthetic and procedural details as well as a mechanistic rationale are presented.     

1,8‐Bis[(dimethoxy)phosphino]naphthalene: A New Bis‐phosphonite Ligand with a Rigid C3‐Backbone and Unexpected Reaction Chemistry

1,8‐Bis[(diethylamino)phosphino]naphthalene ( 1 ) reacted with dry methanol in dichloromethane to form the new bis‐phosphonite ligand 1,8‐bis[(dimethoxy)phosphino]naphthalene (dmeopn, 2 ). By oxidation of 2 with H₂O₂ · (H₂N)₂C(:O) the corresponding bis‐phosphonate, 1,8‐bis[(dimethoxy)phosphoryl]naphthalene ( 3 ), was obtained quantitatively. Reaction of 3 with phosphorus trichloride unexpectedly furnished a 2.4 : 1 mixture of the bis‐phosphonate anhydrides rac‐ and meso‐1,3‐dimethoxy‐1,3‐dioxo‐2,3‐dihydro‐1,3‐diphospha‐2‐oxaphenalene (rac‐ 4 and meso‐ 4 ) from which rac‐ 4 could be fractionally crystallised. The bis‐phosphonite 2 behaved as a normal bidentate chelate ligand towards Mo⁰ and Pd^II, and furnished the complexes [(dmeopn)Mo(CO)₄] ( 5 ) and [(dmeopn)PdCl₂] ( 6 ) when treated with [(nor)Mo(CO)₄] or [(cod)PdCl₂] (nor = norbornadiene, cod = cycloocta‐1,8‐diene). Attempts to prepare 1,8‐diphosphinonaphthalene ( 7 ) by reducing 2 or 3 with LiAlH₄ or LiAlH₄/TMSCl (1 : 1) (TMSCl = trimethyl chlorosilane) in THF led to inseparable mixtures of phosphorus‐containing products. Compounds 2 – 6 were characterised by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy, IR spectroscopy, mass spectrometry and elemental analysis. X‐ray crystal structure analyses were carried out for the bis‐phosphonate anhydride rac‐ 4 and the palladium(II) complex 6 . The geometry of compound rac‐ 4 , in which the phosphorus atoms are connected by an oxygen atom, reveals a relief of strain from the bis‐phosphine 1 , whereas the 1,8‐P,P′‐naphthalenediyl group in 6 is surprisingly distorted; the P atoms are displaced from the naphthalene best plane by –46.7 and 54.5 pm.     

Two pseudo‐enantiomeric forms of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ6,1‐benzothiazine‐3‐carboxamide and their analgesic properties

The fact that molecular crystals exist as different polymorphic modifications and the identification of as many polymorphs as possible are important considerations for the pharmaceutic industry. The molecule of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ⁶,1‐benzothiazine‐3‐carboxamide, C₁₇H₁₆N₂O₄S, does not contain a stereogenic atom, but intramolecular hydrogen‐bonding interactions engender enantiomeric chiral conformations as a labile racemic mixture. The title compound crystallized in a solvent‐dependent single chiral conformation within one of two conformationally polymorphic P2₁2₁2₁ orthorhombic chiral crystals (denoted forms A and B). Each of these pseudo‐enantiomorphic crystals contains one of two pseudo‐enantiomeric diastereomers. Form A was obtained from methylene chloride and form B can be crystallized from N,N‐dimethylformamide, ethanol, ethyl acetate or xylene. Pharmacological studies with solid–particulate suspensions have shown that crystalline form A exhibits an almost fourfold higher antinociceptive activity compared to form B.     

The 1:1 cocrystals of the proton‐transfer compound dilituric acid–phenyl­biguanide monohydrate

A proton‐transfer compound, 1‐phenyl­biguanidium 5‐nitro‐2,6‐dioxo‐1,2,3,6‐tetra­hydro­pyrimidin‐4‐olate monohydrate, C₈H₁₂N₅⁺·C₄H₂N₃O₅⁻·H₂O, has been synthesized by a reaction between dilituric acid (5‐nitro‐2,4,6‐trihydroxy­pyrimi­dine, Dilit) and phenyl­biguanide (N‐phenyl­imido­carbonimidic diamide, Big). This compound cocrystallized as a 1:1 adduct, and the asymmetric unit consists of two dilituric amino–oxo planar tautomeric anions (Dilit⁻), two monoprotonated phenyl­biguanidium cations (BigH⁺) and two water mol­ecules of crystallization (Z′ = 2). Protonation occurs at the N atom attached to the phenyl ring of Big as a result of the proton‐transfer process from the acidic hydr­oxy group of Dilit. In the crystal structure, the hydrated 1:1 adduct is stabilized by 25 two‐ and three‐center hydrogen bonds.     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.     

One‐Pot Cascade Transformation of Glucal into Structurally Diverse Drug‐Like Scaffolds

A diversity‐oriented synthesis strategy to produce three types of structurally drug‐like N‐heterocyclic‐fused rings has been developed from abundant biomass‐derived d ‐glucal, aniline and water in a stereoselective manner. The overall transformation which entails a cascade of Ferrier reaction and 4π conrotatory imino‐Nazarov cyclization was performed in one‐pot allowing convenient preparation of scaffolds of high molecular complexity from relatively simple starting materials. While indoline‐fused products were readily accessible using ortho‐unsubstituted secondary anilines as substrates, reactions with ortho‐hydroxyl‐anilines furnished fused 1,4‐benzoxazines instead. In both cases, InBr₃ acted as the Lewis acid catalyst. By altering InBr₃ to Ln(OTf)₃, the indoline‐fused products could be further converted into tetrahydroquinoline‐fused cyclopentenones via ensuing retro‐ene rearrangement.