Destructive and non-destructive methods for the determination of micro-trace amounts of antimony in high purity silicon by neutron activation analysis

Destructive and non-destructive methods have been used for the determination of microtraces of antimony in high-purity silicon powder. The destructive method was based on substoichiometric radioactivation analysis with solvent extraction using BPHA and cupferron as organic reagents. The antimony contents in high-purity silicon can be determined by the proposed method.     

Use of isooctyl thioglycolate for the separation of tin and antimony

The extraction characteristics of isooctyl thioglycolate (IOTG), a chelating agent, in various diluents has been studied with respect to the metal ions, tin(IV) and antimony(III), in hydrochloric acid medium. It is concluded that antimony(III) can be separated from tin(IV) with 85% yield and with a decontamination factor of at least 1·10⁵ using IOTG diluted with petroleum ether and 3M HCl medium. Tin(IV) can be separated conveniently from antimony(III) in 2M HCl with 95% yield and with a decontamination factor greater than 7·10⁵ using IOTG diluted with carbon tetrachloride.     

Solvent extraction separation of tin (IV) with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A)

Solvent extraction of tin(IV) from hydrochloric acid media was carried out with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC-88A) in toluene. Tin(IV) was quantitatively extracted with 2.5x10(-2) M PC-88A in toluene from 0.1-0.3 M HCl when equilibrated for 5 min. Tin(IV) from the organic phase was stripped with 4 M HCl and determined spectrophotometrically by both the morin and pyrocatechol violet method. The nature of the extracted species was determined from the log-log plots. Various other diluents such as xylene, hexane and cyclohexane also gave quantitative extraction of tin. The metal loading capacity of the reagent was found to be 0-15 ppm of tin(IV). The extraction of tin(IV) was carried out in the presence of various ions to ascertain the tolerance limit of individual ions. Tin(IV) was successfully separated from commonly associated metal ions such as antimony(III), bismuth(III), lead(II), thallium(I), copper(II), nickel(II), etc. The method was extended for determination of tin in real samples.     

Determination of antimony in concentrates, ores and non-ferrous materials by atomic-absorption spectrophotometry after iron-lanthanum collection, or by the iodide method after further xanthate extraction

Methods for determining trace and moderate amounts of antimony in copper, nickel, molybdenum, lead and zinc concentrates and in ores are described. Following sample decomposition, antimony is oxidized to antimony(V) with aqua regia, then reduced to antimony(III) with sodium metabisulphite in 6M hydrochloric acid medium and separated from most of the matrix elements by co-precipitation with hydrous ferric and lanthanum oxides. Antimony (>/= 100 mug/g) can subsequently be determined by atomic-absorption spectrophotometry, at 217.6 nm after dissolution of the precipitate in 3M hydrochloric acid. Alternatively, for the determination of antimony at levels of 1 mug/g or more, the precipitate is dissolved in 5M hydrochloric acid containing stannous chloride as a reluctant for iron(III) and thiourea as a complexing agent for copper. Then tin is complexed with hydrofluoric acid, and antimony is separated from iron, tin, lead and other co-precipitated elements, including lanthanum, by chloroform extraction of its xanthate. It is then determined spectrophotometrically, at 331 or 425 nm as the iodide. Interference from co-extracted bismuth is eliminated by washing the extract with hydrochloric acid of the same acid concentration as the medium used for extraction. Interference from co-extracted molybdenum, which causes high results at 331 nm, is avoided by measuring the absorbance at 425 nm. The proposed methods are also applicable to high-purity copper metal and copper- and lead-base alloys. In the spectrophotometric iodide method, the importance of the preliminary oxidation of all of the antimony to antimony(V), to avoid the formation of an unreactive species, is shown.     

Solvent extraction of antimony(v) with ethyl acetate

A method has been derived for the selective extraction of antimony(V) from hydrochloric acid solution with ethyl acetate. The method can be employed for the rapid determination of antimony in antimonates of lead, tin, mercury, nickel and chromium and in type metal. Iron(III), cobalt(II) cadmium(II), and large amounts of copper(II) and tin(II) interfere with the extraction. For the analysis of type metal, tin must be oxidized to the tetravalent state.     

Determination of antimony in ores and related materials by continuous hydride-generation atomic-absorption spectrometry after separation by xanthate extraction

A continuous hydride-generation atomic-absorption spectrometric method for determining approximately 0.02 mug/g or more of antimony in ores, concentrates, rocks, soils and sediments is described. The method involves the reduction of antimony(V) to antimony(III) by heating with hypophosphorous acid in a 4.5M hydrochloric acid-tartaric acid medium and its separation by filtration, if necessary, from any elemental arsenic, selenium and tellurium produced during the reduction step. Antimony is subsequently separated from iron, lead, zinc, tin and various other elements by a single cyclohexane extraction of its xanthate complex from approximately 4.5M hydrochloric acid/0.2M sulphuric acid in the presence of ascorbic acid as a reluctant for iron(III). After the extract is washed, if necessary, with 10% hydrochloric acid-2% thiourea solution to remove co-extracted copper, followed by 4.5M hydrochloric acid to remove residual iron and other elements, antimony(III) in the extract is oxidized to antimony(V) with bromine solution in carbon tetrachloride and stripped into dilute sulphuric acid containing tartaric acid. Following the removal of bromine by evaporation of the solution, antimony(V) is reduced to antimony(III) with potassium iodide in approximately 3M hydrochloric acid and finally determined by hydride-generation atomic-absorption spectrometry at 217.8 nm with sodium borohydride as reluctant. Interference from platinum and palladium, which are partly co-extracted as xanthates under the proposed conditions, is eliminated by complexing them with thiosemicarbazide during the iodide reduction step. Interference from gold is avoided by using a 3M hydrochloric acid medium for the hydride-generation step. Under these conditions gold forms a stable iodide complex.     

Simultaneous determination of arsenic, antimony and tin by fast-scan differential-pulse polarography and its application to alloy steels

Arsenic, antimony and tin can be determined in the presence of one another by fast-scan differential-pulse polarography (FSDPP) on a single mercury drop in 1.5M hydrochloric acid. The reduction of As(III), Sb(III) and Sn(IV) to the metals is practically reversible and the reduction peaks are sufficiently separated. The lower limits of determination are 0.05, 0.005 and 0.001 μg/ml for As, Sb and Sn respectively, the calibration graphs exhibit very good linearity and the peak heights are reproducible. For application to alloy steels employed in nuclear technology, the elements to be determined must be separated from the matrix by extraction as their covalent bromides into toluene from concentrated sulphuric acid and back-extracted into the base electrolyte (1.5M HCl + 0.012M Br⁻ + 0.03M hydrazinium sulphate). The recoveries of As, Sb and Sn are 100, 95 and 92% respectively and the relative error of determination is a few per cent.     

Extractive separation and spectrophotometric determination of tungsten as ferrocyanide

Tungsten, in amounts ranging from micrograms to milligrams, can be extracted into isoamyl alcohol, as the tungsten(V) ferrocyanide complex obtained by reduction of tungsten(VI) with tin(II) in 4M hydrochloric acid containing ferrocyanide. It can thus be separated from iron, cobalt, chromium, manganese, arsenic, antimony, bismuth, silicon, calcium and copper, their precipitation being prevented by addition of glycerol and, in the case of iron, sulphosalicyclic acid. Molybdenum, vanadium and nickel are not separated from tungsten, however. Tungsten can also be determined spectrophotometrically as tungsten(V) ferrocyanide. The absorbance of the brown complex is measured in aqueous solution or preferably after extraction into isoamyl alcohol. As many alloying elements interfere, they should be separated by the ferrocyanide extraction or other suitable method. Both the separation and the determination methods give satisfactory results with an overall error of not more than 0.5% in the analysis of practical samples containing low or high percentages of tungsten.     

The determination of traces of antimony,tin and arsenic in cadmium by pulse polarography

Traces of antimony, tin and arsenic in cadmium products were determined by pulse polarography. Arsenic was distilled, while antimony and tin were precipitated as hydroxides with manganese dioxide as carrier; some lead was coprecipitated with tin, hence these elements were further separated by distillation. In all cases quantitative recoveries were obtained. Antimony(III) was determined in a hydrochloric acid-sodium hypophosphite mixture, tin(IV) in a hydrochloric-hydrobromic acid mixture and arsenic(III) in sulphuric acid as supporting electrolytes; for arsenic(III), methylene blue had to be added. A sample weight of 10 g and an end volume of 10 ml allowed the determination down to about 0.004 p.p.m. antimony, 0.006 p.p.m. tin and 0.003 p.p.m. arsenic in cadmium. Several synthetic samples and commercially available cadmium products were analysed.     

Gravimetric determination of barium in zirconium metal and in certain zirconium salts

Barium may be determined gravimetrically in quantities ranging from 0.2 to 2.0 mg (± o.1 mg) in hydrated zirconyl chloride and in zirconium metal after complete separation of the zirconium. As much as 10 g of zirconium may be removed by a double precipitation in a (3 to 1) hydrochloric acid medium followed by a cupferron precipitation-chloroform extraction of the residual zirconium. The barium is then determined gravimetrically as barium sulfate in the iron-free, zirconium-free filtrate by precipitation with an excess of ammonium sulfate. As much as 0.015% barium has been found in impure zirconyl chloride, 0.004% in commercial “purified” zirconyl chloride, 0.000% barium in crystal bar zirconium metal and 0.003% barium in zirconium metal sheet. Reproducibility is 0.001%.     

Effect of dielectric constant on Rf values of metal ions in some formic acid-alcohol solvent systems

Correlations between dielectric constant and R(f) values for numerous alcohol-formic acid systems have been made. Most metal ions behave similarly, but arsenic(III), antimony(III) and tin(II) show different properties.     

Spectrophotometric determination of germanium in ores, concentrates, zinc-processing products and related materials with phenylfluorone and cetyltrimethylammonium bromide after separation by iron collection and heptane extraction of germanium tetrachloride

A method for determining approximately 0.2 microg/g or more of germanium in ores, concentrates, zinc-processing products and related materials is described. The sample is decomposed by fusion with sodium peroxide and the cooled melt is dissolved in dilute sulphuric acid. Silica, if > 50 mg, is removed by volatilization with hydrofluoric acid. Germanium is separated from sodium salts by co-precipitation with hydrous ferric oxide, the precipitate is dissolved in 3M hydrochloric acid and germanium is subsequently separated from iron(III) and other co-precipitated elements by a single heptane extraction of germanium tetrachloride from approximately 9.4M hydrochloric acid. The extract is washed with 12M hydrochloric acid to remove residual iron(III), then germanium is stripped with water and determined spectrophotometrically with phenylfluorone in a 1.4M hydrochloric acid-0.002M cetyltrimethylammonium bromide medium in the presence of ascorbic acid as a reductant for co-extracted chlorine. The apparent molar absorptivity of the complex is 1.71 x 10(4) l.mole(-1).mm(-1) at 507 nm, the wavelength of maximum absorption. Up to 5 mg of tin(IV), 10 mg of antimony(V) and tungsten(VI) and approximately 50 mg of silica do not interfere. Germanium values are given for some Canadian certified reference ores, concentrates and iron-formation samples and for a metallurgical dust.     

Extraction of antimony with tertiary amines

The extractability of antimony(III) and (V) with tridodecylamine from various aqueous solutions is reported. Extraction from nitric and hydrofluoric acid solutions is low, but extraction from sulphuric, hydrochloric and hydrobromic solutions is high. Antimony-(III) can be separated from antimony(V) in 7M nitric acid or 0.64M hydrobromic acid. The extraction of antimony from hydrochloric acid solutions in methanol, ethanol, and acetone-water mixtures is greater than from pure aqueous solutions of the same acidity. The elements from which antimony can be separated with tertiary amines are given.     

Synthesis of oxide materials in the Mg–Sn–O system for use in composite solid electrolytes

Russian Journal of Applied Chemistry - Joint precipitation of tin(IV) and magnesium hydroxides from hydrochloric acid solutions was studied by differential thermal and X-ray diffraction analysis,...     

Spectrophotometric determination of bismuth in copper and cartridge brass by the iodide method

An improved spectrophotometric method is proposed for the determination with iodide of trace amounts of bismuth in copper and cartridge brass. The sample is dissolved in nitric acid and the bismuth is separated from the copper by an ammoniacal precipitation in the presence of iron(III) hydroxide as a gathering agent. The hydroxide precipitate is dissolved in hydrochloric acid, sulfuric acid is added, the solution is evaporated to a few ml, hydrobromic acid is added to volatilize the antimony and tin, and the solution is evaporated to fumes of sulfuric acid. The bismuth iodide color is then developed with a composite potassium iodide—sodium hypophosphite reagent. Factors affecting the bismuth iodide color are investigated.     

Atomic absorption spectroscopic determination of arsenic in antimony compounds using solvent extraction and arsine generation

Summary An arsine generation-atomic absorption spectroscopic method for the determination of 0.04–4000 p. p. m. of arsenic in antimony compounds is described. The interference from antimony and other elements is eliminated by solvent extraction with benzene. The sample is dissolved in concentrated hydrochloric acid and reduced with titanium(III) chloride. Arsenic(III) is extracted into benzene from 10–12N hydrochloric acid at which concentration no antimony (III) is extracted; arsenic(III) is then back-extracted into water. Arsine is generated with potassium iodide, tin(II) chloride and zinc powder from 2.4N hydrochloric acid solution, and introduced to a nitrogen-hydrogen flame. The method has been tested with various antimony samples.

---

Zusammenfassung Für die Bestimmung von 0,04–4000 ppm Arsen in Antimonverbindungen wurde ein Verfahren zur Arsinbildung und Atomarabsorption entwickelt. Die Störung durch Antimon und andere Elemente wurde durch Extraktion mit Benzol beseitigt. Die Probe wird in konz. Salzsäure gelöst und mit Titan(III)chlorid reduziert. Arsen(III) wird aus 10–12N Salzsäure mit Benzol extrahiert, ohne daß Antimon(III) mitextrahiert wird; As(III) wird dann in Wasser rückextrahiert. Mit Kaliumjodid, Zinn(II)chlorid und Zinkpulver wird aus 2,4N salzsaurer Lösung Arsin entwickelt und in eine Stickstoff-Wasserstoff-Flamme geleitet. Das Verfahren wurde mit verschiedenen Antimonproben getestet.

     

Inversvoltammetrische spurenbestimmung von Antimon(III) und Antimon(V) in aquatischen umweltproben nach selektiver extraktionStripping Voltammetry of Traces of Antimony(III) and Antimony(V) in Natural Waters After Selective Extraction

The biological activity of antimony depends on the oxidation state. The Sb(III) and Sb(V) states can be distinguished, even in the ng l^?1 range, by coupling extraction with ammonium pyrrlidenedithiocarbamate into methyl isobutyl ketone (APDC/MIBK), or N-benzoyl-N-phenylhydroxylamine (BPHA) into chloroform, with anodic stripping voltammetry (a.s.v.). After complex formation with APDC in acetate-buffered medium, Sb(III), but not Sb(V), is extracted into MIBK and quantified by a.s.v. Antimony(V) is quantified in the aqueous phase after removal of Sb(III) by extraction with BPHA into chloroform from the medium acidified with nitric acid. The applicability of the proposed separation/a.s.v. method is demonstrated for samples of rain, snow and water from a dredging operation. The stability of the two antimony species is examined for natural waters with Sb(III) and Sb(V) added; possibilities of stabilization are described. The precedures should be suitable for speciation of antimony in relatively unpolluted waters.     

Using NAA to the Determination of Antimony in Trichlorosilane with Substoichiometric Extraction

Neutron activation analysis has been applied to the determination of trace of antimony based on the substoichiometric extraction of Sb(III) with BPHA (N-benzoyl-N-phenyl hydroxylamine). The antimony contens in trichlorosilane or high purity silicon can be determined by the proposed method down to ppb range. The effect of acid concentration, shaking time, the amount of carrier and the decontamination factors were studied.     

Radiochemical investigation of the electron exchange reaction between tin(II) and tin(IV) in hydrochloric acid solutions

This paper is concerned with the study of isotope exchange reaction between Sn(II) and Sn(IV) in hydrochloric acid solutions. The kinetics of the exchange reaction of tin in these solutions were studied by extraction of Sn(IV)-hydroxyquinolate into chloroform.¹¹³Sn tracer, initially in the Sn(IV) state, was used. The rate of exchange reaction was determined at 22°C in a wide range of hydrochloric acid concentrations (2.8–12M). The dependence of the exchange rate on the concentration of chloride and hydrogen ions in these solutions (ionic strength: I∼8 and I∼12) are given. The activation energy dependence on chloride ion concentration at I∼12 was determined. The possible mechanism of the exchange reaction between tin(II) and tin(IV) is discussed on the basis of these data.     

Analytical applications of condensed phosphoric acid-II: determination of aluminium, iron and titanium in bauxites after decomposition with condensed phosphoric acid

Bauxites can be decomposed by condensed phosphoric acid (CPA) very rapidly without the need for subsequent manipulations such as elimination of silica, digestion of fused products and filtration. It is best to heat the samples at about 700 degrees prior to the decomposition, to prevent them from floating on the surface of the CPA. Under the proposed conditions (100 mg of sample, 10 g of CPA, heating at 300 degrees for 30 min), aluminium, iron and titanium are dissolved quantitatively. Iron is determined by photometry with 1,10-phenanthroline after solvent extraction with MIBK, while titanium is determined with N-benzoyl-N-phenylhydroxylamine (BPHA). The effect of phosphate on the determination of titanium is reduced to a minimum at a BPHA concentration of 0.3% and a hydrochloric acid concentration of 7.2M. Aluminium and iron are precipitated quantitatively as the oxinates at pH 5.5 in the presence of orthophosphoric acid or hydrolysed CPA, while the precipitation of titanium oxinate is completely suppressed by the addition of hydrogen peroxide. The total amount of aluminium and iron is obtained by determining the amount of oxine by bromination method. The amount of aluminium is obtained by subtracting the amount of iron from the sum of the two.