A Green Synthesis of 2‐Amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles by a Step‐wise and One‐pot Three‐component Gewald Reaction

An eco‐friendly method has been developed for the synthesis of 2‐amino‐4‐(9H‐carbazole‐3‐yl)thiophene‐3‐carbonitriles from preliminary carbazole ( 1 ) through an intermediate of 2‐(1‐(9H‐carbazole‐3‐yl)ethylidene)malononitriles using the Knoevenagel condensation followed by the Gewald reaction. On the other hand, the target compounds could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of 1‐(9H‐carbazole‐3‐yl)ethanone ( 3 ), malononitrile, and elemental sulfur. The merits of this preparation are mild reaction conditions. The Gewald reaction is executed with inorganic base NaHCO₃ (H₂O) in tetrahydrofuran, easy work‐up procedure with good yields.     

Two 9‐[(E)‐nitrophenylvinyl]‐9H‐carbazoles

The crystal structures of 9‐[(E)‐(4‐nitrophenyl)vinyl]‐9H‐carbazole and 9‐[(E)‐(3‐nitrophenyl)vinyl]‐9H‐carbazole, both C₂₀H₁₄N₂O₂, are determined mainly by van der Waals forces and π–π interactions between the carbazole and benzene systems. However, the packing modes are different. In the 4‐nitro derivative, the molecules in the weakly bound stack are related by a unit‐cell translation, while in the 3‐nitro derivative there are centrosymmetric pairs of molecules joined by π–π interactions and also pairs of molecules, related by another centre of symmetry, connected by eight relatively short C—H...O interactions.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

One Pot Synthesis of Medicinally Important cis‐2‐Methyl‐4‐amino substituted‐1,2,3,4‐tetrahydroquinolines

A simple synthesis of medicinally important cis‐2‐methyl‐4‐azapan‐2‐one‐1,2,3,4‐tetrahydroquinolines/cis‐9‐(2‐methyl‐1,2,3,4‐tetrahydroquinolin‐4‐yl)‐9H‐carbazole was reported. Multicomponent one pot synthesis with anilines and N‐vinylcaprolactam/N‐vinyl carbazole via imino Diels‐Alder reaction by using antimony trichloride as catalyst and acetonitrile as solvent was employed. NMR technique (2D) was used to study the regio‐ and stereo‐chemistry of newly synthesized compounds. The cis diastereo‐selectivity of the products was predicted by COSY and NOESY studies.     

Synthesis,characterization and polymerization of the novel carbazole‐based monomer 9‐(bicyclo[2.2.1]hept‐5‐en‐2‐ylmethyl)‐9H‐carbazole

Synthesis and characterization of a novel carbazole‐based monomer, 9‐(bicyclo[2.2.1]hept‐5‐en‐2‐ylmethyl)‐9H‐carbazole (BHMCZ) and its copolymerization with ethylene by using two metallocene/MAO catalyst systems are presented. The monomer was characterized by means of NMR spectroscopy, MS and elementary analysis. Copolymerization studies were conducted using [Ph₂C(Ind)(Cp)ZrCl₂] and [Ph₂C(Flu)(Cp)ZrCl₂] catalysts. The [Ph₂C(Ind)(Cp)ZrCl₂] catalyst gave a copolymer containing as much as 4.6 mol‐% of BHMCZ. Polymers were characterized using NMR spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC).     

Gold‐Catalyzed Cyclization of 1‐(Indol‐3‐yl)‐3‐alkyn‐1‐ols: Facile Synthesis of Diversified Carbazoles

Efficient cyclization of 1‐(indol‐3‐yl)‐3‐alkyn‐1‐ols in the presence of a cationic gold(I) complex, leading to annulated or specific substituted carbazoles, was observed. Depending on the reaction conditions and substitution pattern, divergent reaction pathways were discovered, furnishing diversified carbazole structures. Cycloalkyl‐annulated [b]carbazoles are obtained through 1,2‐alkyl migration of the metal‐carbene intermediates; cycloalkyl‐annulated [a]carbazoles are formed through a Wagner–Meerwein‐type 1,2‐alkyl shift; carbazole ethers are constructed through ring‐opening of the cyclopropyl group by nucleophilic attack of water or an alcohol.     

Synthesis and spectroscopic investigation of π‐conjugated (E)‐enyne polycarbazole with different organo‐metallic catalysts from 3,6‐diethynyl‐9‐(2‐ethylhexyl)carbazole

In the present study, a new (E)‐rich‐enyne π‐conjugated polymer containing a carbazole was designed and synthesized. Two different synthesis methods of poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene‐(E)‐vinylene] (PCZEV) have been prepared from 3,6‐diethynyl‐9(2‐ethylhexyl)carbazole by using the palladium‐carbene‐catalyzed reaction and/or by using the organolanthanide‐catalyzed reaction leading to well‐defined polymer, and their general properties were studied. Compared to poly[N‐(2‐ethylhexyl)‐3,6‐carbazolyleneethynylene] (PCE), the UV‐vis absorption and photoluminescence of the PCZEV was red‐shifted, which indicates the extension of conjugation length. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2434–2442, 2009     

1,4‐Phenylenebis(methylene) bis(9H‐carbazole‐9‐carbodithioate)

The molecules of the title compound, C₃₄H₂₄N₂S₄, lie across centres of inversion in the space group P2₁/n. The spacer unit linking the benzene rings and carbazole units is effectively planar, while the carbazole unit itself is slightly folded. Molecules are linked into sheets by a single C—H...π(arene) hydrogen bond and the hydrogen‐bonded sheets are themselves linked into a three‐dimensional framework structure by a single π–π stacking interaction.     

Synthesis and isolation of iodocarbazoles. Direct iodination of carbazoles by N‐iodosuccinimide and N‐iodosuccinimide‐silica gel system

Carbazole ( 1 ) undergoes electrophilic aromatic substitution with various iodinating reagents. Although, 3‐iodocarbazole ( 1b ) and 3,6‐diiodocarbazole ( 1d ) obtained by iodination of carbazole were isolated and characterized sometime ago, 1‐iodocarbazole ( 1a ), 1,6‐diiodocarbazole ( 1c ) and 1,3,6‐triiodocarbazole ( 1e ) had never been isolated from the reaction mixture. The preparation and subsequent isolation and characterization of 1a, 1b, 1c, 1d and 1e are reported (mp, t_r, R_f, ¹H‐nmr, ¹³C‐nmr and ms). As iodinating reagents, NaIO₄/I₂ and NaIO₄/KI mixtures in (i) ethanol doped with catalytical amount of sulfuric acid and in (ii) acetic acid, and N‐odosuccinimide and N‐iodosuccinimide‐silica gel in dichloromethane and in chloroform have been used and their uses have been compared. The iodination reaction of different carbazole derivatives such as 2‐acetoxycarbazole ( 2 ), 3‐bromocarbazole (3) and 3‐nitrocarbazole ( 4 ) was also studied and the corresponding iododerivatives, 2a, 2b, 2c, 3a, 3b, 4a and 4b , are described for the first time. Semiempirical PM3 calculations have been performed in order to predict reactivity of carbazole ( 1 ), substituted carbazoles (2‐4) and iodocarbazoles ( 1a‐1e, 2a‐2c, 3a‐3b, 4a and 4b ) (Scheme 1). Theoretical and experimental results are discussed briefly.     

Synthesis of 2‐Aryl‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐2,5‐dihydro‐1H‐pyrrole‐3‐carboxylates by the Reaction between Hydrazones,Acetylenedicarboxylates, and 1‐Aryl‐N,N′‐bis(arylmethylidene)methanediamines

An efficient approach for the preparation of functionalized 2‐aryl‐2,5‐dihydro‐5‐oxo‐4‐[2‐(phenylmethylidene)hydrazino]‐1H‐pyrroles is described. The four‐component reaction between aldehydes, NH₂NH₂?H₂O, dialkyl acetylenedicarboxylates, and 1‐aryl‐N,N′‐bis(arylmethylidene)methanediamines proceeds in EtOH under reflux in good‐to‐excellent yields (Scheme 1). The structures of 4 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS, and, in the case of 4f , by X‐ray crystallography). A plausible mechanism for this type of reaction is proposed (Scheme 2).     

Highly soluble green‐emitting Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole ligands and their application to polymer light‐emitting diodes

Highly organic soluble Ir(III) complexes with 9‐(6‐phenyl‐pyridin‐3‐ylmethyl)‐9H‐carbazole were simply synthesized, and the solubility of the new complex was significantly improved when compared with the conventional green‐emitting Ir(ppy)₃. Since a carbazole group is tethered through a nonconjugated methylene spacer, the photophysical properties of new complexes are almost identical with those of conventional Ir(ppy)₃. The pure complexes were utilized to prepare electrophosphorescent polymer light‐emitting diodes (PLEDs). The device performances were observed to be relatively better or comparable with those of Ir(ppy)₃ based poly(N‐vinylcarbazole) systems. The integration of rigid hole‐transporting carbazole and phosphorescent complex provides a new route to design highly efficient solution‐processable complex for electrophosphorescent PLED applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7419–7428, 2008     

A μ‐chloro‐bridged dinuclear ruthenium complex with 9H‐carbazole: the formation of one‐dimensional linear chains of star‐shaped edge‐fused rings

The title complex, di‐μ‐chloro‐bis­[chloro­(η⁶‐p‐cymene)ruthenium(II)]–9H‐carbazole (1/2), [Ru₂Cl₄(C₁₀H₁₄)₂]·2C₁₂H₉N, is composed of one [RuCl₂(η⁶‐p‐cymene)]₂ and two 9H‐carbazole mol­ecules. There are one‐half of a dinuclear complex and one 9H‐carbazole mol­ecule per asymmetric unit. In the dinuclear complex, each of the two crystallographically equivalent Ru atoms is in a pseudo‐tetra­hedral environment, coordinated by a terminal Cl atom, two bridging Cl atoms and the aromatic hydro­carbon, which is linked in a η⁶ manner; the Ru⋯Ru separation is 3.688 (3) Å. The title complex has a crystallographic centre of symmetry located at the mid‐point of the Ru⋯Ru line. Inter­molecular N—H⋯Cl and π–π stacking inter­actions are observed. These inter­actions form a four‐pointed star‐shaped ring and one‐dimensional linear chains of edge‐fused rings running parallel to the [100] direction, which stabilize the crystal packing.     

Anionic and ionic coordinative polymerization of ϵ‐caprolactone

The polymerization of ?‐caprolactone initiated by two catalyst systems was studied: (1) carbazole‐potassium in the presence of 18‐crown‐6 ether and (2) NdCl₃/TBP/TIBA (neodymiumtrichloride/tri‐n‐butyl‐phosphate/triisobutylaluminium) at the molar ratio 1/3/1. For both initiator systems conversion/time plots were determined and the polymers were characterized by IR, GPC and by ¹H‐ and ¹³C?NMR spectroscopy. Polyesters with the highest molecular weight (M _n?44 000 g/mol) were obtained for the polymerizations initiated by the carbazole‐potassium/18‐crown‐6 ether system. The features of the polymerization initiated by the carbazole‐potassium/18‐crown‐6 ether system are discussed on the basis of a simple scheme. The nature of this polymerization is non‐living. Copyright © 2000 John Wiley & Sons, Ltd.     

9‐Ethyl‐1,4‐dimethyl‐6‐(4,4,5,5‐tetramethyl‐1,3,2‐dioxaborolan‐2‐yl)‐9H‐carbazole and 6‐bromo‐9‐ethyl‐1,4‐dimethyl‐9H‐carbazole

The title carbazolyl boronic ester, C₂₂H₂₈BNO₂, (I), is a building block for the synthesis of new carbazole derivatives of potential utility as pharmaceutically active compounds. The crystal structure of (I) and of the title bromocarbazole compound, C₁₆H₁₆BrN, (II), the synthetic precursor of (I), were solved and analysed with the aim of understanding the lack of reactivity of (I) under Suzuki cross‐coupling reaction conditions. In both structures, the methyl groups are coplanar with the carbazole ring system, and the ethyl group lies out of the carbazole plane. The dioxaborolane ring of boronic ester (I) adopts a half‐chair conformation but lies approximately in a planar orientation with respect of the carbazole ring system, whereas the Br atom of (II) is coplanar with the carbazole plane. In (I), the carbazole–boronic ester C—B bond length is 1.5435 (14) Å, which is somewhat shorter than the usual value of 1.57 Å.     

Synthesis,structural analysis,and visualization of poly(2‐ethynyl‐9‐substituted carbazole)s and poly(3‐ethynyl‐9‐substituted carbazole)s containing chiral and achiral minidendritic substituents

The synthesis of 2‐ethynyl‐9‐substituted carbazole and 3‐ethynyl‐9‐substituted carbazole monomers containing first‐generation chiral and achiral dendritic (i.e., minidendritic) substituents, 2‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (2ECz), 3‐ethynyl‐9‐[3,4,5‐tris(dodecan‐1‐yloxy)benzyl]carbazole (3ECz), 2‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (2ECz*), and 3‐ethynyl‐9‐{3,4,5‐tris[(S)‐2‐methylbutan‐1‐yloxy]benzyl}carbazole (3ECz*), is presented. All monomers were polymerized and copolymerized by stereospecific polymerization to produce cis‐transoidal soluble stereoisomers. A structural analysis of poly(2ECz), poly(2ECz*), poly(3ECz), poly(3ECz*), poly(2ECz*‐co‐2ECz), and poly(3ECz*‐co‐3ECz) by a combination of techniques, including ¹H NMR, ultraviolet–visible, and circular dichroism spectroscopy, thermal optical polarized microscopy, and X‐ray diffraction experiments, demonstrated that these polymers had a helical conformation that produced cylindrical macromolecules exhibiting chiral and achiral nematic phases. Individual chains of these cylindrical macromolecules were visualized by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3509–3533, 2002     

Ring‐opening metathesis polymerization of new norbornene‐based monomers containing various chromophores

Pure exo‐functional norbornene monomers containing various chromophores such as fluorene, pyrene, and carbazole were successfully prepared via the Diels–Alder reaction and condensation reaction. The living ring‐opening metathesis polymerization (ROMP) of a fluorene‐containing monomer, exo‐2‐(fluorene‐9‐ylcarboxymethyl)norborn‐5‐ene (exo‐1), was observed and confirmed by the formation of a diblock copolymer and a linear relationship between the number‐average molecular weight and [M]/[I] ratios ([M] = monomer concentration; [I] = initiator concentration). The synthesis and characteristics of novel fluorene‐containing polymers based on pure exo‐1 are reported with Grubbs catalyst I {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂} with a high molecular weight of 3.18 × 10⁴ in 90 s ([M]/[I] = 100). However, the ROMP of pyrene‐ and carbazole‐containing monomers [exo‐5‐(pyrene methoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene and exo‐5‐(carbazole ethoxy carbonyl)bicyclo[2.2.1]hept‐2‐ene, respectively] were carried out in a nonliving fashion. All the chromophore‐containing polymers showed excellent solubility in various organic solvents, particularly in chloroform, N‐methyl‐2‐pyrrolidinone, and 1,2‐dichlorobenzene. The glass transition temperatures of polynorbornenes containing various chromophores were determined to be 80–109 °C (by differential scanning calorimetry) higher than that of ring‐opened polynorbornene (glass transition temperature = 35 °C), indicating that the incorporation of the pendant aromatic moieties (e.g., fluorene, pyrene, and carbazole) could enhance the transition temperature for segmental motions of polymer chains. The photoluminescence spectra of all polymer solutions showed a strong emission in the blue region of the visible spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3022–3031, 2007     

Parameters influencing the molecular weight of 3,6‐carbazole‐based D‐π‐A‐type copolymers

Condensation copolymerization reactions of carbazole 3,6‐diboronate with 4,7‐bis(5‐bromo‐2‐thienyl)‐2,1,3‐benzothiadiazole (DTBT) only produce low‐molecular‐weight donor (D)‐π‐acceptor (A) copolymers. High‐molecular‐weight copolymers for use in optoelectronic devices are necessary for achieving extended π‐conjugation and for controlling the copolymer processibility. To elucidate the cause of the persistently low molecular weight, we synthesized three 3,6‐carbazole‐based D‐A copolymers using copolymerizations of N‐9′‐heptadecanyl‐3,6‐carbazole with DTBT, N‐9′{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl}‐3,‐6‐carbazole with DTBT, and N‐9′‐heptadecanyl‐3,6‐carbazole with alkyl‐substituted DTBT. We investigated several parameters for their influence on molecular copolymer weight, including the conformation of the chain during growth, the solubility of the monomers, and the dihedral angles between the donor and acceptor units. Size exclusion chromatography, UV–vis absorption spectroscopy, and computational studies revealed that the low molecular weights of 3,6‐carbazole‐based D‐A copolymers resulted from conjugation breaks and the resulting high coplanarity, which led to strong interactions between polymer chains. These interactions limited formation of high‐molecular‐weight‐copolymers during copolymerization. The strong intermolecular interactions of the 3,6‐carbazole moiety were exploited by incorporating 3,6‐carbazole units into poly[9′,9′‐dioctyl‐2,7‐flourene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] prepared from 9′,9′‐dioctyl‐2,7‐flourene and DTBT. Interestingly, the number average molecular weight increased gradually with increasing 2,7‐fluorene monomer content but the number of conjugation breaks was a range of 6–7. The hole mobilities of the copolymers were studied for comparison purposes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Total Synthesis of Murrayanine Involving 4,5‐Dimethyleneoxazolidin‐2‐ones and a Palladium(0)‐Catalyzed Diaryl Insertion

A new total synthesis of the natural carbazole murrayanine ( 1 ) was developed by using the 4,5‐dimethyleneoxazolidin‐2‐one 12 as starting material. The latter underwent a highly regioselective Diels–Alder cycloaddition with acrylaldehyde (=prop‐2‐enal; 13 ) to give adduct 14 (Scheme 3). Conversion of this adduct into diarylamine derivative 9 was carried out via hydrolysis and methylation (Scheme 4). Differing from our previous synthesis, in which such a diarylamine derivative was transformed into 1 by a Pd^II‐stoichiometric cyclization, this new approach comprised an improved cyclization through a more efficient Pd⁰‐catalyzed intramolecular diaryl coupling which was applied to 9 , thus obtaining the natural carbazole 1 in a higher overall yield.     

Approaches for synthesis of soluble poly(3,6‐dihydroxy‐2,7‐carbazole) with phenolic function

Poly(N‐alkyl‐3,6‐dihydroxy‐2,7‐carbazole) which should be soluble and have phenolic function was synthesized through different two routes. The former method was a direct synthesis by polymerizing a 2,7‐dibromo‐3,6‐dihydroxycarbazole monomer using Ni(cod)₂, which only gave a low molecular weight polymer. The latter method was an ether cleavage reaction of methoxy groups in a precursor polymer, poly(3,6‐dimethoxycarbazole), using BBr₃, which gave successfully the objective polymer that has a number average molecular weight of 4300 g/mol comparable to the precursor polymer. They showed large spectral changes in photoabsorption and fluorescence on addition of base. They also showed redox behavior similar to a hydroquinone/benzoquinone couple investigated by cyclic voltammetry. These new functions could be derived from the phenolic hydroxy group in the carbazole unit. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2039–2044     

Synthesis of 5‐Aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles via Three‐Component Reaction of 1,1‐Bis(methylsulfanyl)‐2‐nitroethene,Aromatic Aldehydes,and Hydrazine

An efficient approach for the preparation of functionalized 5‐aryl‐3‐(methylsulfanyl)‐1H‐pyrazoles 2 is described. This three‐component reaction between benzaldehydes 1 , NH₂NH₂?H₂O, and 1,1‐bis(methylsulfanyl)‐2‐nitroethene proceeds in EtOH under reflux conditions in good‐to‐excellent yields. The structures of 2 were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS). A plausible mechanism for this type of reaction is proposed (Scheme 2).