A diffusive anomaly of water in aqueous sodium chloride solutions at low temperatures

Molecular dynamics simulations are presented for the self-diffusion coefficient of water in aqueous sodium chloride solutions. At temperatures above the freezing point of pure water, the self-diffusion coefficient is a monotonically decreasing function of salt concentration. Below the freezing point of pure water, however, the self-diffusion coefficient is a non-monotonic function of salt concentration, showing a maximum at approximately one molal salt. This suggests that sodium chloride, which is considered a structure-making salt at room temperature, becomes a structure-breaking salt at low temperatures. A qualitative understanding of this effect can be obtained by considering the effect of ions on the residence time of water molecules near other water molecules. A consideration of the freezing point depression of aqueous sodium chloride solutions suggests that the self-diffusion coefficient of water in supercooled sodium chloride solutions is always higher than that in pure (supercooled) water at the same temperature.     

Chloride ion conduction without water coordination in the pore of ClC protein

In the present work, we have found by an atomistic molecular dynamics simulation that hydrogen atoms originating from the residues of a prokaryotic ClC protein (EcClC) stabilize the chloride ion without water molecules in the pore of ClC protein. When the chloride ion conduction is simulated by pulling a chloride ion along the pore axis, the free energy barrier for chloride ion conduction is calculated to be low (4 kcal/mol), although the chloride ion is stripped of its hydration shell as it passes through the dehydrated pore region. The calculation of the number of hydrogen atoms surrounding the chloride ion reveals that water molecules hydrating the chloride ion are replaced by polar and non‐polar hydrogen atoms protruding from the protein residues. From the analysis of the pair interaction energy between the chloride ion and these hydrogen atoms, it is realized that the hydrogen atoms from the protein residues stabilize the chloride ion at the dehydrated region instead of water molecules, by which the energetic penalty for detaching water molecules from the permeating ion is compensated. © 2009 Wiley Periodicals, Inc. J Comput Chem, 2010     

Isopiestic Study of Water + Mannitol(sat) + Sodium Chloride + Ammonium Chloride + Barium Chloride at <Emphasis Type="Italic">T</Emphasis> = 298.15 K and Comparison with the Ideal-Like Solution Model

Isopiestic measurements have been carried out at the temperature 298.15 K for the quinary system (water + mannitol(sat) + sodium chloride + ammonium chloride + barium chloride) saturated with mannitol and its ternary sub-systems (water + mannitol(sat) + sodium chloride), (water + mannitol(sat) + ammonium chloride) and (water + mannitol(sat) + barium chloride). Taking aqueous sodium chloride as reference solutions, osmotic coefficients of the other aqueous solutions were determined. The experimental results show that the isopiestic activities of the quinary system in relation to its ternary sub-systems are in excellent agreement with the ideal-like solution model.     

Concentrated Ionic Fluids: Is There a Difference Between Chloride-Based Brines and Deep Eutectic Solvents?

Deep Eutectic Solvents (DESs) have been lauded as novel solvents, but is there really a difference between them and concentrated aqueous brines? They provide a method of adjusting the activity of water and chloride ions which can affect mass transport, speciation and reactivity. This study proposes a continuum of properties across concentrated ionic fluids and uses metal processing as an example. Charge transport is shown to be governed by fluidity and there is no discontinuity between molar conductivity and fluidity irrespective of cation, charge density or ionic radius. Diffusion coefficients of iron(III) and copper(II) chloride in numerous concentrated ionic fluids show the same linear correlation between diffusion coefficient and fluidity. These oxidising agents were used to etch copper, silver and nickel and while the etching rate increased with fluidity for copper, etching of silver and nickel only occurred at high chloride and low water activity as passivation occurred when water activity increased. Overall, brines provide a high chloride content at a lower viscosity than DESs, but unlike DESs, brines are unable to prevent passivation due to their high water content. The results show how selective etching of mixed metal waste streams can be achieved by tuning chloride and water activity.     

Selective Fluorescence Turn‐On Sensing of Phosphate Anion in Water by Tetraphenylethylene Dimethylformamidine

A tetraphenylethylene (TPE) derivative bearing two dimethylformamidine units was synthesized. The dihydrogen chloride salt of this TPE derivative was soluble in water and showed almost no emission. By addition of phosphate anions, the dihydrogen chloride salt could be transformed into the monohydrogen chloride salt, which was barely soluble and emitted strong fluorescence through aggregation‐induced emission (AIE), while many other anions could not bring about a fluorescence enhancement. Meanwhile, the dihydrogen chloride salt and monohydrogen chloride salt could be reversible transformed by addition of acid and base alternately in the presence of phosphate anion, which led to fluorescence turn‐on and turn‐off. Therefore, the TPE dimethylformamidine holds potential for selectively sensing phosphate anions in water and use as fluorescence pH switch. This study provided a new approach to AIEgen sensors by using formamidine groups.     

Preparation and characterization of a polyimide membrane

Two different polyimide semipermeable membranes have been prepared from two base polyimides of PMDA/ODA and BTDA/ODA by incorporation of lithium chloride with the respective poly(amic acids) and subsequently leaching out the maximum possible lithium chloride by water at slightly elevated temperature. The water and various organic vapor permeability of the lithium chloride modified films has been found to be better compared to the respective control films. BTDA/ODA based polyimide films show overall lower permeability.     

多元轻稀土硝酸盐水溶液的等压实验研究

采用改进的等压法研究了影响多元轻稀土硝酸盐水溶液体系等压平衡的因素,确定了在低水活度区以氯化钙水溶液、高水活度以氯化钠水溶液为等压平衡参考物;等压平衡实验时间按水溶液浓度由高到低的顺序依次从4d到7d不等;确定了硝酸镧、硝酸镨及硝酸钕水溶液的等当点.结果表明,在实验误差允许范围内,所考察的系统符合偏理想溶液模型.     

Potentiometric determination of chlorides with an "Air-Gap" cyanide sensor

A new electroanalytical method for determining chloride ions with an Air-Gap cyanide sensor system is described. The method is based on the reaction of chloride with mercury(II) cyanide in dilute sulphuric acid. This reaction leads to hydrogen cyanide which can be determined with an Air-Gap cyanide sensor. Optimum concentrations of mercury(II) cyanide and sulphuric acid were established and an analytical curve was prepared for 1 x 10(-1)-1 x 10(-5)M Cl(-). The slope of the calibration curve was equal to 62.8 mV/log C. The correlation coefficient (R) was equal to 0.9992. The method can determine chloride with good results in high saline solutions and in the presence of surfactants, which is in contrast to direct potentiometry with a chloride electrode. The method was applied for chloride determination in fuses used for initiating explosions. The chlorides were determined both in the raw materials used to prepare the fuse braids and in the other fuse components. Chloride was also determined in drinking water and river water. In dependence of source, chloride amount analyzed in drinking water was in the range 2.18-182.6 mg/l. and 25.8 mg/l. in river water. A comparative analysis was carried out. In the first case, chloride was determined by a turbidimetric method, whereas in the second one by potentiometric titration against a chloride-ISE.     

A theoretical study of the mechanism of the water-catalyzed HCl elimination reactions of CHXCl(OH) (X = H, Cl) and HClCO in the gas phase and in aqueous solution

A systematic ab initio investigation of the water-assisted decomposition of chloromethanol, dichloromethanol, and formyl chloride as a function of the number of water molecules (up to six) building up the solvation shell is presented. The decomposition reactions of the chlorinated methanols and formyl chloride are accelerated substantially as the reaction system involves additional explicit coordination of water molecules. Rate constants for the decomposition of chlorinated methanols and formyl chloride were found to be in reasonable agreement with previous experimental observations of aqueous phase decomposition reactions of dichloromethanol [CHCl(2)(OH)] and formyl chloride. For example, using the calculated activation free energies in conjunction with the stabilization free energies from the ab initio calculations, the rate constant was predicted to be 1.2-1.5 x 10(4) s(-1) for the decomposition of formyl chloride in aqueous solution. This is in good agreement with the experimental rate constant of about 10(4) s(-1) reported in the literature. The mechanism for the water catalysis of the decomposition reactions as well as probable implications for the decomposition of these chlorinated methanol compounds and formaldehydes in the natural environment and as intermediates in advanced oxidation processes are briefly discussed.     

Neue verfahren zur jodometrischen mikrobestimmung von jodid- bzw. Bromidion

The methods described above are based on the fact, that iodide can be determined as iodate on iodometric way after oxidation with freshly prepared chlorine water and after removal of excess of free chlorine by means of potassium cyanide. However oxidation may be carried out by adding of hypobromite the excess of which can be removed by adding of phenol water.Bromide can be transformed to BrCl by means of an excess of chlorine water. BrCl reacts with potassium cyanide under formation of cyanogen bromide and chloride. The excess of free chlorine would be removed as cyanogen chlorine and chloride. The cyanogen bromide formed can be measured on the usual iodometric way.     

Enthalpy and entropy interaction parameters of sodium chloride with some monosaccharides in water

Dilution enthalpies of sodium chloride and some monosaccharides (glucose, ga-lactose, xylose, arabinose, and fructose) in water and mixing enthalpies of aqueous sodium chloride and these monosaccharide solutions were measured by using an improved precision semimicro-titration calorimeter. Transfer enthalpies of sodium chloride from water to aqueous saccharide solutions were evaluated as well as enthalpy interaction parameters of sodium chloride with these monosaccharides in water. Combined with Gibbs energy interaction parameters, entropy interaction parameters were also obtained. The results show that interactions of the saccharides with sodium chloride depend on the stereochemistry of saccharide molecules. These interaction parameters can identify stereochemical structure of saccharide molecules.     

气相色谱与原子吸收联用及其在有机锡化合物形态分析中的应用

本文研究适合于有机锡化合物形态分析的气色谱－原子吸收联用技术的接口。在优化、改进的分离测定条件下，成功地实现了一甲基锡、二甲基锡、三甲基锡、一丁基锡、二丁基锡、三丁基锡、四丁基锡化合物的分离，并以内标法测定了湖、海水、工业废水等水样中的丁基锡化合物。     

Temperature dependence of fractionation of hydrogen isotopes in aqueous sodium chloride solutions

The D/H ratios of hydrogen gas in equilibrium with aqueous sodium chloride solutions of 2, 4 and 6 molalities were determined within the range 10 to 95°C, using a hydrophobic platinum catalyst. With each of the different sodium chloride concentrations, the hydrogen isotope effect between the solution and pure water changes linearly with the square of the reciprocal temperature. On the basis of the results for hydrogen isotope fractionation observed in this study, and those of hydrogen isotope fractionation between pure water and vapor, it is concluded that the structure of the aqueous sodium chloride solution does not change significantly with temperature. The hydrogen isotope effect is evidently different from the results of vapor pressure isotope effects (VPIE) on sodium chloride solutions measured on separated isotopes. The difference between the present work and the VPIE studies is probably due to a non-ideal behavior in a mixture of isotopic water molecules and/or to a H₂O-D₂O disproportionation reaction in sodium chloride solutions. The distinction between the latter two mechanisms can not be differentiated at present.     

Lithium isotope effects in extraction of lithium chloride by benzo-15-crown-5 in the 1,1,7-trihydrododecafluoroheptanol–water system

The extraction characteristics of the 1,1,7-trihydrododecafluoroheptanol water system have been studied for lithium chloride as the salt to be extracted and benzo-15-crown-5 as the extracting agent, as well as blank extraction of lithium chloride in this system. Single-stage lithium isotope separation factors (a) have been measured at various lithium chloride concentrations in water, and the isotope effect has been multiplied by extraction chromatography. The value of a for the Li⁶–Li⁷ pair was 1.024. The light lithium isotope is concentrated in the organic phase.     

Improvement of water vapor adsorption ability of natural mesoporous material by impregnating with chloride salts for development of a new desiccant filter

The aim of this study is the development of a new adsorbent for the desiccant material which can be regenerated by the domestic exhaust heat by using natural mesoporous material, Wakkanai siliceous shale. To improve this shale’s performance to adsorb/desorb the water vapor, lithium chloride, calcium chloride or sodium chloride was supported into the mesopores by impregnating with each chloride solution. Especially sodium chloride was effective to increase the water vapor adsorption amount 5–7 times of that of natural shale in the relative humidity range from 50 to 70%. Moreover, the appropriate impregnating concentrations were determined as 5wt% from the relationship between the maximum water vapor adsorption amount and the mesopore volume. Based on these results, a new desiccant filter has been developed by impregnated original paper with lithium chloride and sodium chloride. This paper contained shale powder in the synthetic fibers. The dehumidification performance of this filter was evaluated under the simulated summer condition in Tokyo. From the cyclic adsorption/regeneration test, this shale and chlorides filter could adsorb and desorb 60 g/h water vapor repeatedly at the regeneration temperature of 40°C. On the other hand, a silica gel filter and a zeolite filter adsorbed and desorbed only 10 g/h and 25 g/h, respectively. These results suggested that the shale impregnated with the chlorides has the best dehumidification ability as a new desiccant material. Further, the desiccant filter made from the shale will achieve the effective use of the low temperature exhaust heat.     

Polymerization of aromatic nuclei. XXVII. ESR studies on polymers and oligomers from reaction of benzenoid and naphthalene monomers with lewis acid catalyst–oxidant systems

Chlorobenzene and toluene were polymerized with aluminum chloride–cupric chloride to produce materials that consist mainly of poly(o-phenylene) structures. These species exhibited radical cation concentrations comparable to that of poly(p-phenylene). Polymerization of naphthalene and 1-chloronaphthalene with aluminum chloride–cupric chloride or ferric chloride–water also resulted in products with high radical cation concentrations. Polynuclear structures may be responsible for the paramagnetic character; alternatively, p-quinoidal moieties may be present in naphthalenes. The depth of color in the samples is directly related to the concentration of radical cations.     

Simultaneous flow injection determination of ammoniacal nitrogen and chloride in industrial effluent water with a combined on-line gas diffusion/dialyser unit

An on-line gas diffusion/dialyser unit has been designed and incorporated into the manifold of a flow injection system for the simultaneous determination of two different species in a single sample injected into the FIA system. A fast and reliable fully automated two-component flow injection procedure has been carried out where a single sample (50 l industrial effluent water) is injected into a carrier stream and simultaneously gas diffused and dialysed in a single on-line gas diffusion/dialyser unit for the determination of ammonia and chloride, respectively. The results obtained for the ammoniacal nitrogen and chloride in industrial effluent water compared well with data obtained by standard methods. The relative standard deviation for industrial effluent water samples with concentrations of ammoniacal nitrogen in the range between 0.050 and 1 g/l and chloride from 0.127 to 2.531 g/l have been better than 1.0% for ammoniacal nitrogen and 0.5% for chloride, respectively. The proposed system could be attractive for routine analyses of industrial effluent water.     

S(N)2 Mechanism for Alcoholysis, Aminolysis, and Hydrolysis of Acetyl Chloride

First-order solvolysis rate constants are reported for solvolyses of acetyl chloride in methanol and MeOD, and in binary aqueous mixtures with acetone, acetonitrile, ethanol, methanol, and trifluoroethanol at 0 degrees C. Product selectivities (S = [MeCOOR]/[MeCOOH] x [water]/[alcohol]) are reported for solvolyses in ethanol/ and methanol/water at 0 degrees C. Solvolyses of acetyl chloride show a high sensitivity to changes in solvent ionizing power, consistent with C-Cl bond cleavage. As the solvent is varied from pure ethanol (or methanol) to water, S values and rate-rate profiles show no evidence for the change in reaction channel observed for solvolyses of benzoyl and trimethylacetyl chlorides. However, using rate ratios in 40% ethanol/water and 97% trifluoroethanol/water (solvents of similar ionizing power but different nucleophilicities) to compare sensitivities to nucleophilic attack, solvolyses of acetyl chloride are over 20-fold more sensitive to nucleophilic attack than benzoyl chloride. The solvent isotope effect of 1.29 (MeOH/MeOD) for acetyl chloride is similar to that for p-methoxybenzoyl chloride (1.22) and is lower than for benzoyl chloride (1.55). Second-order rate constants for aminolyses of acetyl chloride with m-nitroaniline in methanol at 0 degrees C show that acetyl chloride behaves similarly to p-methoxybenzoyl chloride, whereas benzoyl chloride is 40-fold more sensitive to the added amine. The results indicate mechanistic differences between solvolyses of acetyl and benzoyl chlorides, and an S(N)2 mechanism is proposed for solvolyses and aminolyses by m-nitroaniline of acetyl chloride (i.e. these reactions are probably not carbonyl additions, but a strong sensitivity to nucleophilic attack accounts for their high rates).     

Tetrachloroantimon(V)-methansulfinat

Tetrachloroantimony(V) Methanesulfinate Tetrachloroantimony(V) methanesulfinate II can be prepared by reaction of methanesulfinic acid chloride with the 1:1 addition compound of antimony(V) chloride and water resp. by reaction of sodium methanesulfinate with antimony(V) chloride. The mass spectrum shows that II is dimer. The mass and vibrational spectra are discussed.     

INNA for interelement correlations in rats after mercuric chloride exposure

In an animal model study, we exposed rats to mercuric chloride through drinking water continuously for eight to ten months. A group of these rats were then taken off mercuric chloride water and fed distilled water. A control group of rats was given distilled water. Rat brain, spinal cord, and kidney were analyzed to determine Hg and nine other elements by INAA. Significant imbalances were detected among the groups. Most of the mercury (Hg) was found to be eliminated from the tissues studied within the first thirty days. Implications of the data are discussed in light of observed trace element imbalances in amyotrophic lateral sclerosis and Alzheimer's disease.