In vitro and in vivo studies of androst‐4‐ene‐3,6,17‐trione in horses by gas chromatography–mass spectrometry

This paper describes the application of gas chromatography–mass spectrometry (GC‐MS) for in vitro and in vivo studies of 6‐OXO in horses, with a special aim to identify the most appropriate target metabolite to be monitored for controlling the administration of 6‐OXO in racehorses. In vitro studies of 6‐OXO were performed using horse liver microsomes. The major biotransformation observed was reduction of one keto group at the C3 or C6 positions. Three in vitro metabolites, namely 6α‐hydroxyandrost‐4‐ene‐3,17‐dione (M1), 3α‐hydroxyandrost‐4‐ene‐6,17‐dione (M2a) and 3β‐hydroxyandrost‐4‐ene‐6,17‐dione (M2b) were identified. For the in vivo studies, two thoroughbred geldings were each administered orally with 500 mg of androst‐4‐ene‐3,6,17‐trione (5 capsules of 6‐OXO_®) by stomach tubing. The results revealed that 6‐OXO was extensively metabolized. The three in vitro metabolites (M1, M2a and M2b) identified earlier were all detected in post‐administration urine samples. In addition, seven other urinary metabolites, derived from a further reduction of either one of the remaining keto groups or one of the remaining keto groups and the olefin group, were identified. These metabolites included 6α,17β‐dihydroxyandrost‐4‐en‐3‐one (M3a), 6,17‐dihydroxyandrost‐4‐en‐3‐one (M3b and M3c), 3β,6β‐dihydroxyandrost‐4‐en‐17‐one (M4a), 3,6‐dihydroxyandrost‐4‐en‐17‐one (M4b), 3,6‐dihydroxyandrostan‐17‐one (M5) and 3,17‐dihydroxyandrostan‐6‐one (M6). The longest detection time observed in urine was up to 46 h for the M6 metabolite. For blood samples, the peak 6‐OXO plasma concentration was observed 1 h post administration. Plasma 6‐OXO decreased rapidly and was not detectable 12 h post administration. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis,one‐ and two‐photon properties of poly[9,10‐bis(3,4‐bis(2‐ethylhexyl‐oxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐/2,7‐carbazolevinylene]

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of two novel 2,6‐anthracenevinylene‐based copolymers, poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinylene‐alt‐N‐octyl‐3,6‐carbazolevinyl‐ene] ( P1 ) and poly[9,10‐bis(3,4‐bis(2‐ethylhexyloxy)phenyl)‐2,6‐anthracenevinyl‐ene‐alt‐N‐octyl‐2,7‐carbazolevinylene] ( P2 ) were reported. The as‐synthesized polymers have the number‐average molecular weights of 1.56 × 10⁴ for P1 and 1.85 × 10⁴ g mol^?1 for P2 and are readily soluble in common organic solvents. They emit strong bluish‐green one‐ and two‐photon excitation fluorescence in dilute toluene solution (? _P1 = 0.85, ? _P2 = 0.78, λ_em( P1 ) = 491 nm, λ_em( P2 ) = 483 nm). The maximal TPA cross‐sections of P1 and P2 measured by the two‐photon‐induced fluorescence method using femtosecond laser pulses in toluene are 840 and 490 GM per repeating unit, respectively, which are obviously larger than that (210 GM) of poly[9,10‐bis‐(3,4‐bis(2‐ethylhexyloxy) phenyl)‐2,6‐anthracenevinylene], indicating that the poly(2,6‐anthracenevinylene) derivatives with large TPA cross‐sections can be obtained by inserting electron‐donating moieties into the polymer backbone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 463–470, 2010     

Ring‐Opening Metathesis Polymerization Based Pore‐Size‐Selective Functionalization of Glycidyl Methacrylate Based Monolithic Media: Access to Size‐Stable Nanoparticles for Ligand‐Free Metal Catalysis

Monolithic polymeric supports have been prepared by electron‐beam‐triggered free‐radical polymerization using a mixture of glycidyl methacrylate and trimethylolpropane triacrylate in 2‐propanol, 1‐dodecanol, and toluene. Under appropriate conditions, phase separation occurred, which resulted in the formation of a porous monolithic matrix that was characterized by large (convective) pores in the 30 μm range as well as pores of <600 nm. The epoxy groups in pores of >7 nm were hydrolyzed by using poly(styrenesulfonic acid) (M_w=69 400 g mol^?1, PDI=2.4). The remaining epoxy groups inside pores of <7 nm were subjected to aminolysis with norborn‐5‐en‐2‐ylmethylamine ( 2 ) and provided covalently bound norborn‐2‐ene (NBE) groups inside these pores. These NBE groups were then treated with the first‐generation Grubbs initiator [RuCl₂(PCy₃)₂(CHPh)]. These immobilized Ru–alkylidenes were further used for the surface modification of the small pores by a grafting approach. A series of monomers, that is, 7‐oxanorborn‐5‐ene‐2,3‐dicarboxylic anhydride ( 3 ), norborn‐5‐ene‐2,3‐dicarboxylic anhydride ( 4 ), N,N‐di‐2‐pyridyl‐7‐oxanorborn‐5‐ene‐2‐carboxylic amide ( 5 ), N,N‐di‐2‐pyridylnorborn‐5‐ene‐2‐carboxamide ( 6 ), N‐[2‐(dimethylamino)ethyl]bicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide ( 7 ), and dimethyl bicyclo[2.2.1]hept‐5‐en‐2‐ylphosphonate ( 8 ), were used for this purpose. Finally, monoliths functionalized with poly‐ 5 graft polymers were used to permanently immobilize Pd²⁺ and Pt⁴⁺, respectively, inside the pores. After reduction, metal nanoparticles 2 nm in diameter were formed. The palladium‐nanoparticle‐loaded monoliths were used in both Heck‐ and Suzuki‐type coupling reactions achieving turnover numbers of up to 167 000 and 63 000, respectively.     

Ene Reaction with Pummerer‐type Reaction Intermediate of α‐(Methylthio)‐N‐methoxy‐N‐methyl Acetamide: A New Synthesis of N‐methoxy‐N‐methyl‐(E,E)‐2,4‐dienamides

Pummerer‐type reaction intermediate 2 of α‐(methylthio)‐N‐methoxy‐N‐methyl acetamide (1) has been found to react with 1‐alkenes to afford ene adducts 3 . N‐Methoxy‐N‐methyl‐(E,E)‐2,4‐dienamides were synthesized from the adducts 3b‐f .     

Synthesis and Structural Characterisation of Derivatives of Tricyclo[5.2.1.02,6]Dec‐8‐Ene‐3,5‐Dione with an Expected Antimicrobial Activity

Anhydrides, imides, N‐ethylimides, N‐hydroxyimides and N‐aminoimides of 1,4,5,6‐tetramethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid, 1,4,5,6,7‐pentamethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid and 7‐ethyl‐1,4,5,6‐tetramethyl‐bicyclo[5.2.1.0^2,6]hept‐5‐ene‐2,3‐dicarboxylic acid were obtained. Antimicrobial activity of the newly obtained derivatives was tested against selected Gram‐positive and Gram‐negative bacteria and fungi of the Candida species. The structures of obtained compounds and their antimicrobial activity were compared. Structure of 1b, 2b and 1e were determined by an X‐ray analysis.     

An Efficient Synthesis of Optically Active trans‐(3R,4R)‐3‐Acetoxy‐4‐aryl‐1‐(chrysen‐6‐yl)azetidin‐2‐ones Using (+)‐Car‐3‐ene as a Chiral Auxiliary

An efficient enantioselective synthesis of 3‐acetoxy trans‐β‐lactams 7a and 7b via [2+2] cycloaddition reactions of imines 4a and 4b , derived from a polycyclic aromatic amine and bicyclic chiral acid obtained from (+)‐car‐3‐ene, is described. The cycloaddition was found to be highly enantioselective, producing only trans‐(3R,4R)‐N‐azetidin‐2‐one in very good yields. This is the first report of the synthesis of enantiomerically pure trans‐β‐lactams 7a and 7b with a polycyclic aromatic substituent at N(1) of the azetidin ring.     

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions as a route to well‐defined mono and bis end‐functionalized poly(N‐isopropylacrylamide)

Sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used as a facile and quantitative method for modifying end‐groups on an N‐isopropylacrylamide (NIPAm) homopolymer. A well‐defined precursor of polyNIPAm (PNIPAm) was prepared via reversible addition‐fragmentation chain transfer (RAFT) polymerization in DMF at 70 °C using the 1‐cyano‐1‐methylethyl dithiobenzoate/2,2′‐azobis(2‐methylpropionitrile) chain transfer agent/initiator combination yielding a homopolymer with an absolute molecular weight of 5880 and polydispersity index of 1.18. The dithiobenzoate end‐groups were modified in a one‐pot process via primary amine cleavage followed by phosphine‐mediated nucleophilic thiol‐ene click reactions with either allyl methacrylate or propargyl acrylate yielding ene and yne terminal PNIPAm homopolymers quantitatively. The ene and yne groups were then modified, quantitatively as determined by ¹H NMR spectroscopy, via radical thiol‐ene and radical thiol‐yne reactions with three representative commercially available thiols yielding the mono and bis end functional NIPAm homopolymers. This is the first time such sequential thiol‐ene/thiol‐ene and thiol‐ene/thiol‐yne reactions have been used in polymer synthesis/end‐group modification. The lower critical solution temperatures (LCST) were then determined for all PNIPAm homopolymers using a combination of optical measurements and dynamic light scattering. It is shown that the LCST varies depending on the chemical nature of the end‐groups with measured values lying in the range 26–35 °C. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3544–3557, 2009     

A New Synthesis of Ciliapterin and Dictyopterin. Ene Reactions of (Alkenylamino)‐nitroso‐pyrimidines

A comparison of the reactivity of (acylamino)‐nitroso‐pyrimidines 1 and the alkenylamino analogue 17 in intramolecular ene reactions showed the considerably lower reactivity of 17 , leading to the pteridine 18 . Pteridin‐7‐one 11 resulting from 1 (R¹=OBn, R²=Me) was transformed into 4‐(benzyloxy)‐6‐[(E)‐prop‐1‐enyl]pteridin‐2‐amine ( 13 ) by O‐triflation, followed by reduction with LiBHEt₃, while the 4‐MeO analogue 18 was prepared by spontaneous oxidation of the initial ene product of 17 . The (alkenylamino)‐nitroso‐pyrimidine 17 was synthesized by substitution of the dimethoxy‐nitroso‐pyrimidine 16 with the allylamine 15 . Ciliapterin ( 5 ) and dictyopterin ( 7 ) were synthesized from pteridine 18 by a Sharpless asymmetric dihydroxylation.     

First Synthesis of a C‐Homosteroid from Pregn‐4‐ene‐3,11,20‐trione

(3α,5α)‐3‐Hydroxy‐C‐homopregnane‐11,20‐dione ( 3 ) was prepared in eleven steps from the commercially available pregn‐4‐ene‐3,11,20‐trione ( 4 ) via the 11‐oxo‐13‐formyl‐12,13‐secopregnane intermediate 11 (Scheme 2). Subjection of this secopregnane to an intramolecular aldol condensation afforded the α,β‐unsaturated key intermediate C‐homopregn‐12‐en‐11‐one 12 .     

Ring‐opening metathesis polymerization of cis‐cyanocyclooct‐4‐ene: Search for active catalysts,variation of monomer to catalyst ratios and monomer concentrations

The ring‐opening metathesis polymerization (ROMP) of cis‐cyanocyclooct‐4‐ene initiated by ruthenium‐based catalysts of the first, second, and third generation was studied. For the polymerization with the second generation Grubbs catalyst [RuCl₂(?CHPh)(H₂IMes)(PCy₃)] (H₂IMes = N,N′‐bis(mesityl)‐4,5‐dihydroimidazol‐2‐ylidene), the critical monomer concentration at which polymerization occurs was determined, and variation of monomer to catalyst ratios was performed. For this catalyst, ROMP of cis‐cyanocyclooct‐4‐ene did not show the features of a living polymerization as M_n did not linearly increase with increasing monomer conversion. As a consequence of slow initiation rates and intramolecular polymer degradation, molar masses passed through a maximum during the course of the polymerization. With third generation ruthenium catalysts (which contain 3‐bromo or 2‐methylpyridine ligands), polymerization proceeded rapidly, and degradation reactions could not be observed. Contrary to ruthenium‐based catalysts of the second and third generation, a catalyst of the first generation was not able to polymerize cis‐cyanocyclooct‐4‐ene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel Flame‐Retardant and Thermally Stable Poly(Amide‐imide)s Based on Bicyclo[2,2,2]oct‐7‐Ene‐2,3,5,6‐Tetracarboxylic Diimide and Phosphine Oxide in the Main Chain: Synthesis and Characterization

Six novel poly(amide‐imide)s PAIs 5a‐f were synthesized through the direct polycondensation reaction of six chiral N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f with bis(3‐amino phenyl) phenyl phosphine oxide 4 in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP), triphenyl phosphite (TPP), calcium chloride (CaCl₂) and pyridine. The polymerization reaction produced a series of flame‐retardant and thermally stable poly(amide‐imide)s 5a‐f with high yield and good inherent viscosity of 0.39–0.83 dLg^?1. The resultant polymers were fully characterized by means of FTIR, ¹H NMR spectroscopy, elemental analyses, inherent viscosity, specific rotation and solubility tests. Thermal properties and flame retardant behavior of the PAIs 5a‐f were investigated using thermal gravimetric analysis (TGA and DTG) and limited oxygen index (LOI). Data obtained by thermal analysis (TGA and DTG) revealed that these polymers show good thermal stability. Furthermore, high char yields in TGA and good LOI values indicated that resultant polymers exhibited good flame retardant properties. N,N′‐(bicyclo[2,2,2]oct‐7‐ene‐tetracarboxylic)‐bis‐L‐amino acids 3a‐f were prepared in quantitative yields by the condensation reaction of bicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride 1 with L‐alanine 2a , L‐valine 2b , L‐leucine 2c , L‐isoleucine 2d , L‐phenyl alanine 2e and L‐2‐aminobutyric acid 2f in acetic acid solution. These polymers can be potentially utilized in flame retardant thermoplastic materials.     

One‐pot synthesis of polymeric nanoparticle by ring‐opening metathesis polymerization

Shell‐functionalized polymeric nanoparticle was prepared through the method of polymerization‐induced self‐assembly of block copolymers [poly(2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene)‐block‐poly(7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester), PBNBE‐b‐PONBDM] via one‐pot ring‐opening metathesis polymerization of 2,3‐bis(2‐bromoisobutyryloxymethyl)‐5‐norbornene (BNBE) and 7‐oxanorborn‐5‐ene‐exo‐exo‐2,3‐dicarboxylic acid dimethyl ester (ONBDM) in a selective solvent. The compositions and the molecular weights of the copolymers were estimated by ¹H‐NMR and gel permeation chromatography. The micelles were characterized by dynamic light scattering, transmission electron micrograph, and atomic force microscopy. The results indicated that the spherical micelles constructed with bromine‐bearing PBNBE shell and PONBDM core were stable and reproducible in toluene. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Total Synthesis of (+)‐β‐Himachalene

An enantioselective synthesis of (+)‐β‐himachalene ( 2 ) was accomplished starting from (1S,2R)‐1,2‐epoxy‐p‐menth‐8‐ene ( 3 ) in 15 or 16 steps with an overall yield of ca. 6% (Schemes 3, 5, and 6). Key transformations include an Ireland–Claisen rearrangement, a Corey oxidative cyclization, and a ring expansion.     

Palladium‐Catalyzed Cascade Oligocyclizations Involving Competing Elementary Steps Such as Thermal [1,5]‐Acyl Shifts

Palladium(Pd)‐catalyzed oligocyclizations of 2‐bromotetradec‐1‐ene‐7,13‐diynes with an unsubstituted terminal acetylene moiety like 3 and 5 and 15‐bromohexadec‐15‐ene‐3,9‐diyn‐2‐ones like 4 and 6 afforded fulvene derivatives 20 and 21 (Scheme 7) and bis(cyclohexane)‐annulated methylenecyclopentene systems 16 and 18 (Schemes 5 and 6), respectively. These transformations constitute cascades of cyclizing carbopalladation steps with ensuing [1,5]‐sigmatropic H‐atom and acyl shifts, respectively (Scheme 8). In contrast, analogous substrates with one three‐atom and one four‐atom tether between the unsaturated C,C‐bonds, such as 1 and 2 , behave differently in that the Pd‐substituted hexa‐1,3,5‐triene intermediates 12 undergo a 6π‐electrocyclization instead of a 5‐exo‐trig carbopalladation followed by β‐hydride elimination to furnish tricyclic bis‐annulated benzene derivatives 13 and 14 (Scheme 4).     

Synthesis of Derivatives of the Optically Active β‐Amino Acids from (+)‐Car‐2‐ene

The reaction of (+)‐car‐2‐ene ( 4 ) with chlorosulfonyl isocyanate (=sulfuryl chloride isocyanate; ClSO₂NCO) led to the tricyclic lactams 6 and 8 corresponding to the initial formation both of the tertiary carbenium and α‐cyclopropylcarbenium ions (Scheme 2). A number of optically active derivatives of β‐amino acids which are promising compounds for further use in asymmetric synthesis were synthesized from the lactams (see 16, 17 , and 19 – 21 in Scheme 3).     

A three‐dimensional cadmium coordination polymer based on 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene and benzene‐1,3,5‐tricarboxylic acid

The Cd^II three‐dimensional coordination poly[[[μ₄‐1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene]bis(μ₃‐5‐carboxybenzene‐1,3‐dicarboxylato)dicadmium(II)] dihydrate], {[Cd₂(C₉H₄O₆)₂(C₈H₁₀N₆)]·2H₂O}_n , (I), has been synthesized by the hydrothermal reaction of Cd(NO₃)₂·4H₂O, benzene‐1,3,5‐tricarboxylic acid (1,3,5‐H₃BTC) and 1,4‐bis(1,2,4‐triazol‐1‐yl)but‐2‐ene (1,4‐btbe). The IR spectrum suggests the presence of protonated carboxylic acid, deprotonated carboxylate and triazolyl groups. The purity of the bulk sample was confirmed by elemental analysis and X‐ray powder diffraction. Single‐crystal X‐ray diffraction analysis reveals that the Cd^II ions adopt a five‐coordinated distorted trigonal–bipyramidal geometry, coordinated by three O atoms from three different 1,3,5‐HBTC²⁻ ligands and two N atoms from two different 1,4‐btbe ligands; the latter are situated on centres of inversion. The Cd^II centres are bridged by 1,3,5‐HBTC²⁻ and 1,4‐btbe ligands into an overall three‐dimensional framework. When the Cd^II centres and the tetradentate 1,4‐btbe ligands are regarded as nodes, the three‐dimensional topology can be simplified as a binodal 4,6‐connected network. Thermogravimetric analysis confirms the presence of lattice water in (I). Photoluminescence studies imply that the emission of (I) may be ascribed to intraligand fluorescence.     

Allylic Peroxidations with Bis(2‐pyridylimino)isoindolato‐Cobalt and ‐Iron Complexes

Several novel substituted bis(2‐pyridylimino)isoindolato (BPI) cobalt(II) and iron(II) complexes [M(BPI)(OAc)(H₂O)] (M = Co: 1 ‐ 6, Fe: 7) have been synthesized by reaction of bis(2‐pyridylimino)isoindole derivatives with the corresponding metal(II) acetates. Reaction of 1‐6 with 1.5 ‐ 2 molar equivalents of t‐BuOOH gave the corresponding alkylperoxocobalt(III) complexes [Co(BPI)(OAc)(OOtBu)] (10 ‐ 15). Using an aqueous solution of t‐BuOOH (70 %), cyclohexene was selectively catalytically oxidized to the dialkylperoxide cyclohex‐2‐ene‐1‐t‐butylperoxide.     

Formation of 2‐(Phenylsulfonyl)resorcinols (=2‐(Phenylsulfonyl)benzene‐1,3‐diols) from Symmetrically Substituted Maleic Anhydrides (=Furan‐2,5‐diones)

Treatment of symmetrically substituted maleic anhydrides (=furan‐2,5‐diones) 6 with lithium (phenylsulfonyl)methanide, followed by methylation of the adduct with MeI/K₂CO₃ in acetone, give the corresponding 4,5‐disubstituted 2‐methyl‐2‐(phenylsulfonyl)cyclopent‐4‐ene‐1,3‐diones 8 (Scheme 3). Reaction of the latter with lithium (phenylsulfonyl)methanide in THF (?78°) and then with 4 mol‐equiv. BuLi (?5° to r.t.) leads to 5,6‐disubstituted 4‐methyl‐2‐(phenylsulfonyl)benzene‐1,3‐diols 9 (Scheme 4).     

An efficient nonisocyanate route to polyurethanes via thiol‐ene self‐addition

A novel and efficient strategy for the synthesis of nonisocyanate polyurethanes has been developed via thiol–ene self‐photopolymerization. An aliphatic thiol–ene carbamate monomer (allyl(2‐mercaptoethyl)carbamate, AMC) was synthesized by a one‐step synthesis procedure, from cysteamine and allyl chloroformate. The urethane group was therefore incorporated directly into the monomer precursor, avoiding the problems associated to toxic isocyanates. AMC was successfully stabilized with the radical inhibitor pyrogallol (1% wt). In addition, the use of phenyl phosphonic acid as coadditive allowed its stabilization for lower concentrations of pyrogallol (0.1% wt). AMC was directly transformed into thermoplastic polyurethane (TPU) through thiol–ene photopolymerization by UV‐irradiation at 365 nm. The obtained TPU presented semi‐crystalline nature and very high thermal stability (T_5% ～325 °C). It was found that high concentrations of pyrogallol decreased the reaction rate and final conversion of photopolymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3017–3025     

1,2‐Bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile and Vinyl Ethers: Cyclic Ketene Imines on the Pathway to 1 : 2 Cycloadducts

(E)‐ and (Z)‐1,2‐bis(trifluoromethyl)ethene‐1,2‐dicarbonitrile (BTE; (=E)‐ and (Z)‐1,2‐bis(trifluoromethyl)but‐2‐enedinitrile) were reacted with an excess of methyl vinyl ether, used as solvent, and furnished 1 : 2 adducts 6 (54%) and cyclobutanes 3 as 1 : 1 adducts (41%). The four diastereoisomeric bis‐adducts 6 (different ratios from (E)‐ and (Z)‐BTE) are derivatives of 1‐azabicyclo[4.2.0]oct‐5‐ene; X‐ray analyses and ¹⁹F‐NMR spectra revealed their structures. Since the cyclobutanes 3 are resistant to vinyl ether, the pathways leading to mono‐ and bis‐adducts must compete on the level of the intermediate l,4‐zwitterions 1 and 2 . The latter either cyclize to the cyclobutanes 3 or to six‐membered cyclic ketene imines 8 which accept a second molecule of vinyl ether to yield the bis‐adducts 6 . The occurrence of the highly strained ketene imines 8 gains credibility by comparison to stable seven‐membered cyclic ketene imines recently reported.