Regioselective α-alkylation of ketones with alkyl chlorides and fluorides via highly nucleophilic magnesium enamides

A magnesium enamide derived from N-2-(N′,N′-dimethylamino)ethyl imine reacts with primary and secondary alkyl chlorides and fluorides to give an α-alkylated ketone in good to excellent yields upon hydrolysis of the imine moiety. Reactions of the highly nucleophilic magnesium enamide derived from an unsymmetrical ketone take place regioselectively. In addition, the C-C bond formation is stereospecific: a substantial inversion of stereochemistry at the electrophilic carbon center (Walden inversion) was observed, proving its potential utility for the production of optically active compounds.     

Proton affinity correlations for alkyl chlorides

Ab initio SCF calculations with minimal STO-3G and extended 44-31G basis sets have been performed on the simple alkyl chlorides, HCl to t-BuCl, and their protonated analogs. MINDO/3 calculations are also reported for these species and a variety of cyclic and bicyclic chlorides. The much closer agreement with experiment for STO-3G proton affinities than for 44-31G values is in sharp contrast to the results for first-row bases. An excellent correlation is found between both the STO-3G and MINDO/3 proton affinities and the charge on the CIH fragment in RCIH⁺. For the acyclic chlorides, correlations of PA's with the polar substituent constant, σ*, and IP's are also reasonable. In addition, the calculated carbonium ion-HCl interaction energy for t-BuClH⁺ indicates that protonated tertiary chlorides are no more than marginally stable in the gas phase.     

Coupling reaction of alkyl chlorides with silyl enolates catalyzed by indium trihalide

Indium(III) halide catalyzed not only the coupling of alkyl chlorides with silyl enolates derived from esters, ketones, and aldehydes to give a variety of alpha-alkylated carbonyl compounds but also one-pot, three-component reactions of aldehyde enolate, alkyl chloride, and allylsilane or alkynylsilane.     

The reaction of metallic mercury with alkyl halides in the presence of nucleophilic reagents

Russian Chemical Bulletin -     

Photolysis of organopolysilanes. The reaction of photochemically generated trimethylsilyphenylsilylene with alkyl chlorides

Photochemically generated trimethylsilylphenylsilylene reacted with octyl chloride and cyclopropylcarbinyl chloride to give the respective formal carbon-chlorine insertion products. With sec-butyl chloride, trimethylsilylphenylsilylene afforded both the carbon-chlorine insertion product and 1-chloro-1phenyl-2,2,2-trimethyldisilane (IV), while with tert-butyl chloride, IV was obtained as the sole volatile product.     

Retro-ene reaction I: Reaction of N-hydroxymethylsaccharin with benzoyl chlorides and alkyl halides

N-Benzoylsaccharins, N-(saccharinylmethyl) benzoates and N-alkylsaccharins were synthesized from N-hydroxymethylsaccharin and the corresponding benzoyl chlorides or alkyl halides under different conditions. The reaction mechanisms are also discussed.     

Domino nucleophilic trifluoromethylations of alkyl perfluorodithioesters

Under nucleophilic initiation, alkyl perfluorodithioesters react with trifluoromethyl(trimethyl)silane in a domino process beginning with a thiophilic addition-β-elimination of fluoride ion which leads to a perfluoroketenedithioacetal. Further addition-elimination steps eventually gives a mixture of mono, bis- and tris(trifluoromethyl) vinyl sulfides. Although they are difficult to separate, these new compounds were fully characterized by ¹⁹F NMR and mass spectrometry.     

Rh-catalyzed alkoxycarbonylation of unactivated alkyl chlorides

A general rhodium-catalyzed selective carbonylative coupling of unactivated alkyl chlorides with aliphatic alcohols or phenols to the corresponding esters is presented for the first time. Crucial for this transformation is the addition of sodium iodide, which provides in situ more active alkyl iodides. In the presence of a Rh(i)-DPPP catalyst system diverse esters (81 examples) including industrially relevant acetates from chloro- and dichloromethane can be prepared in a straightforward manner in up to 95% isolated yield. The used ligand not only affects the selectivity of the carbonylation reaction but also controls the selectivity of the preceding halide exchange step.

An efficient and convenient rhodium-catalyzed alkoxycarbonylation of unactivated alkyl chlorides was developed for the first time. More than 80 examples of esters were prepared directly from readily available substrates with often high selectivity.     

Vibrational analysis of tertiary alkyl chlorides

Vibrational spectra were obtained for 2-chloro-2-methylpentane, 3-chloro-3-methylpentane, 2-chloro-2-methylhexane, and 3-chloro-3-methylhexane. All four compounds exist in T_HHH and T_CHH conformations in the neat liquid, and the T_HHH' conformer of the last named compound also seems to be present. Only the T_HHH conformer is present in the crystalline state of the two pentanes, but the hexanes could not be made to crystallize and both conformers were present in the solid. A 44-parameter modified valence force field was used in normal coordinate calculations, with fifteen force constants being adjusted to fit 188 assigned frequencies below 1500 cm^?1 of six molecules (two conformers each of 2-chloro-2-methylbutane, 2-chloro-2-methylpentane, and 3-chloro-3-methylpentane). The resulting force constant values were used in zero-order calculations of the two hexanes as an aid in interpreting vibrational spectra for those compounds.     

A one-pot synthesis of alkyl acylcarbamodithioates from acid chlorides, thiols, and ammonium thiocyanate

Abstract  

An efficient synthesis of alkyl acylcarbamodithioates by reaction of acid chlorides with ammonium thiocyanate in the presence of thiols is described. The unusually large values of ⁵ J _FH = 12–15 Hz, observed for alkyl (2-fluorobenzoyl)carbamodithioates provide information about Ar–C–N–H torsion in these compounds.     

First Kumada reaction of alkyl chlorides using N-heterocyclic carbene/palladium catalyst systems

For the first time it is shown that N-heterocyclic carbenes are suitable ligands for the palladium-catalyzed coupling of alkyl chlorides with aryl Grignard reagents. A variety of simple as well as functionalized primary alkyl chlorides provide the corresponding alkyl benzenes in general in good to very good yield. By comparing the 1,3-dimesitylimidazol-2-ylidene (IMes) palladium(0) naphthoquinone complex with the previously known palladium phosphine catalyst for the model coupling reaction of 1-chlorohexane with phenylmagnesium bromide it is demonstrated that the new catalyst system is superior.     

A convenient preparation of glycosyl chlorides from aryl/alkyl thioglycosides

[reaction: see text]Because of the vast structural diversity encountered in the field of glycobiology, versatile methods for orthogonal oligosaccharide assembly are always of interest. Reported herein is the preparation of glycosyl chloride donors obtained by reaction of the corresponding thioglycoside precursors with chlorosulfonium chloride reagent 4. The crude chlorides thus obtained can be used directly in subsequent glycosylation reactions, and examples of the generality of this approach are provided.     

A convenient one-pot Negishi coupling of amino-heteroaryl chlorides and alkyl bromides

A simple Ni-catalysed cross-coupling protocol for amino-heteroaryl chlorides with alkylzinc reagents has been developed. The alkylzinc reagents can be commercially available dialkylzincs or alkylzinc halides, or can be conveniently generated in situ from diethylzinc and primary alkyl bromides in the presence of the same inexpensive Ni catalyst used to effect the subsequent coupling reaction.     

Liquid ammonia as a dipolar aprotic solvent for aliphatic nucleophilic substitution reactions

The rate constants for the reactions of a variety of nucleophiles reacting with substituted benzyl chlorides in liquid ammonia (LNH(3)) have been determined. To fully interpret the associated linear free-energy relationships, the ionization constants of phenols ions in liquid ammonia were obtained using UV spectra. These equilibrium constants are the product of those for ion-pair formation and dissociation to the free ions, which can be separated by evaluating the effect of added ammonium ions. There is a linear relationship between the pK(a) of phenols in liquid ammonia and those in water of slope 1.68. Aminium ions exist in their unprotonated free base form in liquid ammonia and their ionization constants could not be determined by NMR. The rates of solvolysis of substituted benzyl chlorides in liquid ammonia at 25 °C show a Hammett ρ of zero, having little or no dependence upon ring substituents, which is in stark contrast with the hydrolysis rates of substituted benzyl halides in water, which vary 10(7) fold. The rate of substitution of benzyl chloride by substituted phenoxide ions is first order in the concentration of the nucleophile indicative of a S(N)2 process, and the dependence of the rate constants on the pK(a) of the phenol in liquid ammonia generates a Br?nsted β(nuc) = 0.40. Contrary to the solvolysis reaction, the reaction of phenoxide ion with 4-substituted benzyl chlorides gives a Hammett ρ = 1.1, excluding the 4-methoxy derivative, which shows the normal positive deviation. The second order rate constants for the substitution of benzyl chlorides by neutral and anionic amines show a single Br?nsted β(nuc) = 0.21 (based on the aqueous pK(a) of amine), but their dependence on the substituent in substituted benzyl chlorides varies with a Hammett ρ of 0 for neutral amines, similar to that seen for solvolysis, whereas that for amine anions is 0.93, similar to that seen for phenoxide ion.