Determination of transition metal ions in tobacco as their 2-(2-quinolinylazo)-5-dimethylaminophenol derivatives using reversed-phase liquid chromatography with UV-VIS detection

This paper reports the utilization of solid-phase extraction and the reversed-phase high-performance liquid chromatography for the determination of six important transition metal ions: iron, cobalt, nickel, copper, zinc and manganese in tobacco with 2-(2-quinolinylazo)-5-dimethylaminophenol (QADMAP) as chelating reagent. Iron, cobalt, nickel, copper, zinc and manganese ions react with QADMAP to form colored chelates in the medium of acetic acid-sodium acetate buffer solution (pH 4.0). These chelates can be enriched by solid-phase extraction with Waters Sep-Pak-C18 cartridge, and eluted the retained chelates from cartridge with tetrahydrofuran. The chelates were separated on a Waters Nova-Pak-C18 column (150x3.9 mm, 5 microm) by gradient elution with methanol (containing 0.5% of acetic acid) and 0.05 mol/l pH 4.0 acetic acid-sodium acetate buffer solution as mobile phase at a flow-rate of 0.5 ml/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 10, 12, 8, 13, 17 and 22 ng/l, respectively. This method had been applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in tobacco with good results.     

Study on Determination of Six Transition Metal Ions in Biological Samples by SPE and RP‐HPLC

This paper reports the utilization of solid phase extraction and the reversed‐phase high‐performance liquid chromatography (RP‐HPLC) for the determination of six transition metal ions (iron, cobalt, nickel, copper, zinc and manganese) in biological samples. The samples were digested by microwave digestion. The iron, cobalt, nickel, copper, zinc and manganese ions in the digested samples can react with 2‐(2‐quinolinylazo)‐5‐diethylaminophenol (QADEAP) to form colored chelates in pH 4.0 acetic acid‐sodium acetic buffer solutions and cetyl trimethylammonium bromide (CTMAB) medium. These chelates were enriched by solid phase extraction with C₁₈ cartridge. Then the chelates were separated on a Waters Nova‐Pak‐C₁₈ column (3.9 × 150 mm, 5 μm) by gradient elution with methanol (containing 0.5% of acetic acid and 0.1% of CTMAB) and 0.05 mol/L pH 4.0 acetic acid‐sodium acetic buffer solution (containing 0.1% of CTMAB) as mobile phase at a flow rate of 0.5 mL/min. The detection limits of iron, cobalt, nickel, copper, zinc and manganese are 3 ng/L, 4 ng/L, 2 ng/L, 4 ng/L, 8 ng/L, 10 ng/L, respectively. This method was applied to the determination of iron, cobalt, nickel, copper, zinc and manganese in biological samples with good results.     

Spectrophotometric simultaneous determination of cobalt, copper and nickel using nitroso-R-salt in alloys by partial least squares

Partial least squares modeling as a powerful multivariate statistical tool applied to spectrophotometric simultaneous determination of cobalt, copper, and nickel in aqueous solutions. The concentration range for cobalt, copper and nickel were 0.4-2.6, 0.6-3.4, 0.5-5.5 ppm, respectively. The experimental calibration set was composed with 36 sample solutions using a mixture design for three component mixtures. The absorption spectra were recorded from 470 to 600 nm. The effect of pH on the sensitivity and selectivity was studied according to net analyte signal (NAS). The values of root mean square difference (RMSD) for cobalt, copper and nickel using partial least squares (PLS) were 0.0192, 0.0263 and 0.0446 ppm, respectively. The effects of various cations and anions were investigated. The method was used to determination of cobalt, copper and nickel in two sample alloys based on copper, nickel and cobalt (known as cunico) and based on cobalt, nickel and iron (known as conife).     

Coprecipitation of heavy metals with erbium hydroxide for their flame atomic absorption spectrometric determinations in environmental samples

Trace amounts of copper, manganese, cobalt, chromium, iron and lead were quantitatively coprecipitated with erbium hydroxide on 0.05 M NaOH medium. The coprecipitant could be easily dissolved with 1 M nitric acid. The presence of up to 15 g/l of erbium ions did not interfere with the atomic absorption spectrometric determination of analyte ions. The recovery values for analyte ions were higher than 95%. The concentration factor was 25-fold. Coprecipitation parameters including reagent amounts and matrix effects are discussed. The relative standard deviations of the determinations were below 9%. The time required for the coprecipitation was about 30 min. The proposed method was successfully applied for the determination of trace amounts of analyte ions in urine, soil and sediment, natural water samples.     

Direct determination of selenium in a wild fruit juice by electrothermal atomic absorption spectrometry

A matrix modifier composed of platinum and nickel is proposed for the determination of selenium in a wild fruit juice made from Lantingguo (Vuccinium uliginosam). Five matrix modifiers (copper/nickel, palladium/magnesium, platinum/magnesium, platinum/nickel and platinum/copper) for suppressing the interference effects of seven co-existing elements (potassium, phosphorus, calcium, magnesium, manganese, zinc and iron) in a wild juice were studied and a matrix modifier composed fro;m 10 mug of platinum and 200 mug of nickel was found to give the best performance. Selenium in three juices was determined by electrothermal atomic absorption spectrometry employing the proposed matrix modifier without matrix preseparation. The relative standard deviation was 14% for 0.20 mg l(-1) of selenium. The recoveries were 95-110%. A characteristic mass was 28 pg.     

Spectrophotometric estimation of cobalt(II) with nitrilotriacetic acid

A convenient and efficient method for the estimation of cobalt(II) ions in the presence of other metal ions is described. Interference of metal ions such as iron(II), iron(III), nickel(II), manganese(II), and copper(II) have been investigated. Only iron(III) ions seriously affect this determination. Copper(II) and nickel(II) ions do not interfere if present in a molar-ratio less than 1:2 in the cobalt(II) ion solution. Cobalt(II)-nickel(II) and cobalt(II)-copper(II) binary mixtures can be efficiently analyzed at selective wavelengths.     

新显色剂2-(2-噻唑偶氮)-5-二乙氨基苯甲酸分光光度法测定微量钴

近年来,杂环偶氮苯甲酸类显色剂取得了较快的发展。由于氨基取代结构对试剂性能有较大的影响^[1],因此本文合成了新显色剂2-(2-噻唑偶氮)-5-二乙氨基苯甲酸,(TAEB)并研究了它与钴的显色反应。     

Simple,Selective, and Sensitive Spectrophotometric Method for Determination of Trace Amounts of Nickel（Ⅱ）, Copper （Ⅱ）, Cobalt （Ⅱ）, and Iron （Ⅲ） with a Novel Reagent 2-Pyridine Carboxaldehyde Isonicotinyl Hydrazone

A selective and sensitive reagent of 2-pyridine carboxaldehyde isonicotinyl hydrazone（2-PYAINH） was synthesized and studied for the spectrophotometric determination of nickel, copper, cobalt, and iron in detail. At a pH value of 7.0, 9,0, 9.0, and 8.0, respectively, which greatly increased the selectivity; nickel, copper, cobalt, and iron reacted with 2-PYAINH to form a 1：2 yellow-orange, 1：2 yellow-green, 1：2 yellow and 1：1 yellow complexes, with absorption peaks at 363, 352, 346, and 359 nm, respectively. Under the optimal conditions, Beer＇s law was obeyed over the ranges of 0.01-1.4, 0.01-1.5, 0.01-2.7, and 0.01-5.4 mg/L respectively. The apparent molar absorptivity and Sandell＇s sensitivities were 8.4×10^4, 5.2×10^4, 7.1×10^4, and 3.9×10^4 L·mol^-l·cm^-1, respectively, and 0.00069, 0.0012, 0.00078, and 0.0014 μg·cm2, respectively. The detection limits were found to be 0.001, 0.002, 0.003, and 0.01 mg/L, respectively. The detailed study of various interfering ions to make the method more sensitive was carried out and selective and several real samples were analyzed with satisfactory results.     

Determination of copper, nickel, zinc, cobalt and manganese in seawater by chelation ion chromatography

Preconcentration and determination of trace elements in seawater by chelation ion chromatography (CIC) was studied. For the retention of metal ions (0.25–0.30 M), ammonium acetate (at pH 4.8–5.1) and macroporous iminodiacetate chelating resin were used. This system (CIC) permits trace and ultra-trace determination of metals in a variety of complex matrices, in particular those with a high content of alkali and alkaline earth metals. Detection limits range from 0.1 to 0.5 ng. Satisfactory results are obtained in the range 0.05–0.5 μg/1 when 60 ml of sample are preconcentrated. In this work the contents of zinc, copper, nickel, cobalt and manganese in seawater from the Venice lagoon are presented. The results obtained by chelation ion chromatography are compared with those obtained using preconcentration of metals with dithizone and ammonium pyrrolidinedithiocarbamate in chloroform and analysed by graphite furnace atomic absorption spectrometry.     

电感耦合等离子体质谱法(ICP-MS)测定镍钴锰三元氢氧化物中铅

研究了用电感耦合等离子体质谱法（ICP-MS）测定镍钴锰三元素氢氧化物中铅含量的测定方法。选择了仪器的最佳测量条件、元素测定的质量数,进行了基体元素的干扰等实验。方法测定结果准确、可靠,测定下限小于0.00005%,样品加标回收率在99.2%~101.0%。方法的建立为控制镍钴锰三元素氢氧化物中铅提供了检测依据。     

Direct determination of iron and manganese in wine using the reference element technique and fast sequential multi-element flame atomic absorption spectrometry

A procedure is proposed for the direct determination of manganese and iron in wine employing fast sequential flame atomic absorption spectrometry and the reference element technique to correct for matrix effects. Cobalt, silver, nickel and indium have been tested as reference elements. The results demonstrated that cobalt and indium at a concentration of 2 and 10mgL(-1) were efficient for quantification of manganese and iron, respectively. Under these conditions, manganese and iron could be determined with quantification limits of 27 and 40microg L(-1), respectively. The proposed method was applied to the determination of manganese and iron in 16 wine samples. The content of manganese varied from 0.78 to 2.89mgL(-1) and that of iron from 0.88 to 9.22mgL(-1). The analytical results were compared with those obtained by inductively coupled plasma optical emission spectrometry after complete mineralization using acid digestion. The statistical comparison by a t-test (95% confidence level) showed no significant difference between the results.     

Direct determination of boron in a cobalt-based alloy by graphite furnace-atomic absorption spectrometry

A matrix modifier composed of nickel and zirconium, and a graphite tube treated with zirconium solution were proposed for the determination of boron in cobalt-based alloys by graphite furnace-atomic absorption spectrometry. The effects of this matrix modifier and the treated graphite tube were studied, and the combination of 60 mug of nickel and 20 mug of zirconium as matrix modifier, and a graphite tube soaked with 10 g 1(-1) of zirconium solution were found to give the highest analytical sensitivity. The interference effects of major components (cobalt) and eight minor components (chromium, nickel, tungsten, iron, tantalum, molybdenum, titanium, aluminium and manganese) were studied. Boron in four cobalt-based alloys was determined by graphite furnace-atomic absorption spectrometry employing the proposed matrix modifier and the treated graphite tube, without the preseparation of matrix. The relative standard deviation was 3.3% for 0.048% of boron. A characteristic mass was 500 pg.     

Determination of niobium in zirconium-niobium alloys

A rapid control determination of niobium in 50% zirconium/50% niobium master-alloy is described; it is a direct spectrophotometric procedure, based on the reaction of niobium ions with hydrogen peroxide in concentrated sulphuric acid. The procedure is suitable for the examination of zirconium alloys containing niobium in the range 0.1 to about 60%. At least 1% of chromium, cobalt, copper, manganese, nickel or tantalum, does not interfere. Interference due to optical absorption by the peroxy-complexes of titanium, tungsten, molybdenum and vanadium is not significant in the determination of niobium above about 1%, provided that these metals are not in excess of about 0.5%, 0.25%, 0.1% and 0.02%, respectively. To compensate for optical absorption due to iron(III), a solution of the sample, not treated with peroxide, is used.     

Flame Atomic Absorption Spectrometric Determination of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) in Ammonium Salts and Industrial Fertilizers after PrEconcentration/Separation on Diaion HP-20

A sensitive and simple separation-enrichment technique for the determination of trace amounts of Cu(II), Co(II), Cd(II), Fe(III) and Mn(II) was described. Metal ions were complexed with 1-nitroso-2-naphthol at pH 9. Following solid-phase extraction on Diaion HP-20 resin, metals were determined by flame atomic absorption spectrometry. The effect of the matrix ions were investigated. The recoveries of metal ions were greater than 95%. The detection limits of the analyte ions ( k = 3, N = 21) were varying 0.18 µg/l for Cd(II) to 0.44 µg/l for Fe(III). The method was applied to a stream sediment standard reference material (GBW7309), some ammonium salts and industrial fertilizer samples for the determination of copper, cobalt, cadmium, iron and manganese. The relative standard deviations (RSD) of the determinations for analyte ions at µg/g levels varied from 1 to 10%.     

Analytical Application of Silica Gel Modified with Didecylaminoethyl-beta-Tridecylammonium Iodide

Sorption of a high molecular weight quaternary ammonium salt, didecylaminoethyl-β-tridecylammonium iodide (DDATD) on different types of sorbents was investigated. The nature of reagent adsorption on silica gel was examined by spectroscopic and computer methods. The sorption of anionic metal complexes of cobalt, copper, zinc and manganese on silica gel modified with DDATD was studied. The possibility of recovery of cobalt and copper thiocyanate complexes and their further atomic absorption determination is shown. Modified sorbent was applied to cobalt chemiluminescence and determined in natural water and a nickel preparation (detection limit, 2 μg/l.).     

偏最小二乘分光光度法同时测定痕量铁、锰、铜、锌、钴和镍

痕量Fe^3 ,Mn^2 ,Cu^2 ,Zn^2 ,Co^2 ,Ni^2 与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚（5－Br-PADAP)和溴化十六烷基三甲基铵（CTMAB）在PH8．3时发生高灵敏显色反应，所形成的三元胶束络合的吸收光谱严重重叠，采用偏最小二乘法（PLS）辅助分光光度法测定了合成试样及饲料中上述6种痕量组分，结果表明，PLS法是化学计量学中一种可适用于基体较复杂的实际试样中痕量组分分光度同时测定的多元计算方法。     

A novel multi-element coprecipitation technique for separation and enrichment of metal ions in environmental samples

A multi-element preconcentration-separation technique for heavy metal ions in environmental samples has been established. The procedure is based on coprecipitation of gold(III), bismuth(III), cobalt(II), chromium(III), iron(III), manganese(II), nickel(II), lead(II), thorium(IV) and uranium(VI) ions by the aid of Cu(II)-9-phenyl-3-fluorone precipitate. The Cu(II)-9-phenyl-3-fluorone precipitate was dissolved by the addition 1.0 mL of concentrated HNO₃ and then the solution was completed to 5 mL with distilled water. Iron, lead, cobalt, chromium, manganese and nickel levels in the final solution were determined by flame atomic absorption spectrometer, while gold, bismuth, uranium and thorium were determined by inductively coupled plasma mass spectrometer. The optimal conditions are pH 7, amounts of 9-phenyl-3-fluorone: 5 mg and amounts of Cu(II): 1 mg. The effects of concomitant ions as matrix were also examined. The preconcentration factor was 30. Gold(III), bismuth(III), chromium(III), iron(III), lead(II) and thorium(IV) were quantitatively recovered from the real samples. The detection limits for the analyte elements based on 3 sigma (n = 15) were in the range of 0.05-12.9 μg L⁻¹. The validation of the presented procedure was checked by the analysis of two certified reference materials (Montana I Soil (NIST-SRM 2710) and Lake Sediment (IAEA-SL-1)). The procedure was successfully applied to some environmental samples including water and sediments.     

n-arylhydroxamic acids as reagents for vanadium(v) : Spectrophotometric determination of vanadium(v) with n-m-tolyl-p-methoxybenzohydroxamic acid

A study of the coloured complexes of 51 N-arylhydroxamic acids with vanadium(V) in hydrochloric acid media is described. The absorption spectra of the coloured chloroform extracts and the molar absorptivities are compared. The effects of different substituents attached to the carbon and nitrogen atom of the hydroxamic acid functional group are discussed. A rapid extraction-spectrophotometric method for the determination of vanadium(V) is described, employing the most promising of these reagents, N-m-tolyl-p-methoxybenzohydroxamic acid. The method is highly selective and tolerates large amounts of diverse ions usually associated with vanadium-bearing materials including iron(III), aluminium(III), chromium(III), nickel(II), cobalt(II), zinc(II) and manganese(II).     

Rapid volumetric method for the estimation of iron in presence of interfering ions

Summary It has been shown that in the photochemical reduction method for the volumetric estimation of iron, there is no interference by chromium, titanium, tungsten, molybdenum, manganese, cobalt, nickel and fluoride. This method is therefore recommended for a rapid determination of iron in alloys and ores without the elimination of these interfering ions. Vanadium, however, was found to give slightly higher values for iron.Our thanks are due to Prof. G.Gopala Rao for his kind interest in the work.     

Different Types of Nickel,Cobalt, and Manganese Complexes originating from 2‐Imidazolecarboxaldiimine of Triethylenetetraamine

The reactivity of the 2‐imidazolecarboxaldiimine of triethylenetetraamine (H2imida) towards divalent manganese, cobalt, and nickel ions differs. It forms a cationic nickel(II) complex by acting as a hexa‐dentate ligand, whereas the cobalt(II) complex formation took place by deprotonation of the H2imida forming a neutral complex with imida. Deprotonation of the ligand by H2imida by cobalt(II) ions caused quenching of the fluorescence emission at 312 nm, such a quenching effect was not observed with the nickel ions. On the other hand, a mononuclear manganese(II) complex of a new tetradentate ligand was formed by manganese(II) assisted intramolecular cyclization reactions of H2imida.