Complexation of Osmium(IV) with 3-Methyl-2,6-Dimercapto-1-Thiopyrone-4 and Its Catalytic Application

The reaction of osmium(IV) with 3-methyl-2,6-dimercapto-1-thiopyrone-4 was studied by spectrometry, amperometry, and potentiometry. In a pH range of 2–4 M HCl (2 M H₂SO₄), insoluble osmium methyl thiopyrone dimercaptides formed with a metal-to-ligand ratio of 1 : 1, 1 : 2, 1 : 3, 1 : 4, and 1 : 6 in HCl solutions and of 1 : 1, 1 : 2, 1 : 3, and 1 : 5 in H₂SO₄ solutions. Conditional stability constants and molar absorption coefficients were determined for the products formed in the presence of excess reagent (n = 3, P = 0.95): logβ = 24.42 ± 0.02 and ε = (2.95 α 0.01) × 10⁴ for the 1 : 5 complex and logβ = 30.24 ± 0.10 and ε = (2.92 ± 0.01) × 10⁴ for the 1 : 6 complex. It was shown that the reagent can be used for the potentiometric titration of osmium(IV). Conditions were determined for the successive titration of components of the osmium(IV)-ruthenium(IV) mixture.     

Study on the reactions of fluoroalkanesulfonyl azides with pyrazine and its derivatives

The thermal reactions of fluoroalkanesulfonyl azides R_fSO₂N₃ with pyrazine and its derivatives are studied in detail. All the reactions involved the fluoroalkanesulfonyl nitrene intermediates R_fSO₃N: which was captured by pyrazine to give the pyrazinium N-fluoroalkanesulfonyl ylides C₄NH₄N⁺-⁻NSO₂R_f and hydrogen abstraction product R_fSO₂NH₂, but no corresponding N-pyrazinyl fluoroalkanesulfonyl amide derivatives R_fSO₂NHC₄N₂H₃ were isolated. Excess azides did not afford the bisN-ylide product R_fSO₂N⁻-⁺NC₄H₄N⁺-⁻NSO₂R_f.     

Synthesis of hydrochloric acid solution for total mercury determination in natural waters

Total mercury (Hg_T) determination requires the addition of concentrated hydrochloric acid solution (≥10 mol L⁻¹ HCl) in relatively high amounts to preserve the samples and to prepare reagent solutions. A method for the preparation of concentrated HCl with Hg_T concentration of lower than 5 ng L⁻¹ is described in this article. It is based on the well-known chemical reaction: 2 NH₄Cl + H₂SO₄ → (NH₄)₂SO₄ + 2 HCl. This method is validated thanks to the US Environmental Protection Agency method 1631 and standard reference materials BCR-579 (mercury in coastal seawater).     

Investigation and characterization of hydrazine and phenylhydrazine complexes of ruthenium(III)1,2-diaminopropanetetraacetate: facile electrochemical and chemical reduction of hydrazines in relevance to nitrogenases

Interaction of hydrazines N₂H₄X⁺ (X=H/Ph) with [Ru(HL)(OH₂)] (1) (L=1,2-diaminopropanetetraacetate, PDTA) has been investigated by potentiometry, spectrophotometry and electrochemistry in aqueous solution at 25°C. The deprotonation and hydrolysis constants of 1 and its hydrazinium adducts formed in 0.1 M Na₂SO₄ solution were determined by potentiometry, while the second order rate constant k₁ and k₂ for the formation of [Ru(HL)(N₂H₄X)]⁺ and [Ru(L)(N₂H₄X)] were determined kinetically by spectrophotometry. At pH 2.8, the complex 1 exhibited a quasi-reversible one-electron reduction step at (E_1/2) −0.251 V vs. SCE and the hydrazinium adducts obtained in situ in the presence of excess (100 equiv) N₂H₄X⁺ showed an additional multi-electron (two-electron per metal at a time) reduction step at (E_1/2) −0.046/−0.158 V (vs. SCE) in the case of X=H/Ph, respectively in sampled-dc. The hydrazines, N₂H₄X⁺ were reduced electrolytically by holding the potential at −0.150 and −0.250 V (Hg-pool) vs. SCE, respectively, and chemically by using H₂ at atmospheric pressure, ascorbic acid, catechol, Zn-dust and NaBH₄ in the presence of these hydrazinium adducts. The turnover numbers, moles of ammonia formed per mole of metal per hour, have been calculated, discussed and compared with those of EDTA (ethylenediaminetetraacetate) analogue. The plausible reaction mechanism for the chemical and the electrochemical reduction of N₂H₄X⁺ to ammonia and/or aniline and the implication of these results on the possible function of nitrogenases have also been proposed. The complex [Ru(HL)(N₂H₅)]HSO₄ and [Ru(HL)(N₂H₄Ph)]Cl were synthesized and characterized.     

The formation of aryloxenium ion in the reaction of N-nitro-O-(4-nitrophenyl)hydroxylamine with strong acids

The reaction of N-nitro-O-(4-nitrophenyl)hydroxylamine (1) with conc. H₂SO₄ affords 4-nitropyrocatechol and that with conc. sulfonic acids (RSO₃H where R = Me, CF₃) affords 2-hydroxy-5-nitrophenyl-R-sulfonates in yields of 80?C85%. These reactions are assumed to proceed through an intermediate (phenoxy)oxodiazonium ion [NO₂C₆H₄O-N=N=O]⁺, which eliminates the N₂O molecule to form the aryloxenium ion [NO₂C₆H₄O]⁺. The latter reacts with acid anions at the ortho-carbon atom of the phenyl ring. The thermodynamical parameters of the elementary reactions resulting in the formation of the (phenoxy)oxodiazonium ion [NO₂C₆H₄O-N=N=O]⁺ and aryloxenium ion [NO₂C₆H₄O]⁺ were calculated in the B3LYP/6?311+G(d) study of the combined molecular system (nitrohydroxylamine 1 + [H₃SO₄]⁺). The reaction of nitrohydroxylamine 1 with aqueous solutions of strong acids (??70% H₂SO₄, CF₃SO₃H) affords mainly 4-nitrophenol. It appears that the mechanism of this reaction does not involve the formation of the aryloxenium ion.     

Un réactif spécifique du germanium: la phénylfluorone

Based on the action of methyl fluorone on Ge(IV) the use of this reagent for the detection of germanium is described. It is necessary to treat with 6N HCl to make this reaction specific.However, another derivative of fluorone, namely phenyl fluorone, is still better for identifying Ge(IV). By placing a drop of the solution under test, previously strongly acidified (3 N to 6N in HCl), on a phenyl fluorone reagent paper and adding 2 or 3 drops of 6 N HNO₃, a. sensitive and specific reaction for germanium is obtained.The only interfering ions are those of strong oxidising agents (Ce⁺⁴, Cr⁺⁶, Mn⁺⁷, etc.) which destroy the reagents and must be eliminated in the first place.Other ions and ions of the group of the sulphides soluble in alkalisulfides do not interfere, even in the proportion of 100 parts by weight, to 1 of Ge. The limit of dilution is about 10^-5.5.     

A new reagent for the colorimetric and spectrophotometric determination of phosphorus,arsenic and germanium

A new reagent for the colorimetric and spectrophotometric determination of phosphorus, arsenic and gurmanium is described. It contains Mo(Vl) amd Mo(V) in the ratio of 3 : 2 in an acid medium, 10N with respect to H₂SO₄ and 3N with respect to HCl.The absorption spectra, the influence of temperature, time, quantity of reagent and selectivity of the method have been studied. Beer's law is applicable up to 160 μg for P₂O₅, 220 μg for GeO₂ and 230 μg for arsenic, in 50 ml.     

Generation of oxodiazonium ions 3. Synthesis of [1,2,5]oxadiazolo[3,4-c]cinnoline-1,5-dioxides

A reaction of 4-(N-nitramino)-3-phenylfuroxane with the Ac₂O/H₂SO₄ system leads to the formation of [1,2,5]oxadiazolo[3,4-c]cinnoline-1,5-dioxide, the first representative of furoxanocinnolines. The reaction presumably proceeds through the transformation of the nitramine fragment NHNO₂ to the oxodiazonium ion [N=N=O]⁺ with subsequent intramolecular attack by this cation on the phenyl ring. Furoxanocinnoline is also formed in the reaction of the 4-(N-nitramino)-3-phenylfuroxane O-methyl derivative with H₂SO₄. It is assumed that this reaction also proceeds with involvement of the intermediate cation [N=N=O]⁺ formed by the protonation of the N=N(O)OMe group and subsequent elimination of MeOH. 7-Nitro derivative is formed when furoxanocinnoline is nitrated with the concentrated HNO₃/H₂SO₄ mixture. The compounds obtained were characterized by ¹H, ¹³C, and ¹⁴N NMR spectroscopy.     

Polarographic analysis. II

Summary The polarography of hexavalent uranium in sulphuric acid solutions of different concentrations and solutions containing sodium sulphate is studied. In 0.01 M H₂SO₄ three waves are obtained corresponding to the successive reduction of U^VI to U^V, U^V to U^IV and U^IV to U^III. The second and third waves intermingle by increasing the H₂SO₄ concentration up to 0.055 M or by adding Na₂SO₄ or sulphosalicylic acid. In 0.25 M H₂SO₄ or in the presence of EDTA the second wave shifts to less negative potentials and intermingles with the first wave, forming a single wave along which reduction of U^VI gives a mixture of U^V and U^IV. The diffusion current of this wave increases up to 1 M H₂SO₄ and then decreases above this acidity. The diffusion current measured at –0.6 V is proportional to the U^VI concentration in the presence of 0.25–0.6 M H₂SO₄. This is not the case in the presence of EDTA. The proportionality is better at lower than at higher acidity.Part I: See Z. analyt. Chem.174, 4 (1960).     

Sorption and conducting properties of perfluorinated MF-4SC membranes in aqueous solutions containing phenylammonium ions

A comparative study of the sorption effect is performed for nitrogen-containing ammonium, phenylammonium (PhA⁺), and tetrabutylammonium (TBA⁺) cations on conducting and hydrophilic properties of protonic form of perfluorinated sulfocationite MF-4SC membrane. Conductometric method was used to study thermodynamic equilibria in the systems of perfluorinated MF-4SC membrane—aniline in the acid solutions of variable composition (PhA⁺/HCl and PhA⁺/H₂SO₄). Concentration constants of ion-exchange equilibrium are calculated for a MF-4SC membrane on the basis of these data. These constants in the solutions of aniline with HCl and H₂SO₄ are 10.3 and 27.0, accordingly. The choice of sulfuric acid as background electrolyte for matrix polyaniline synthesis is substantiated.     

Solvent extraction of hafnium(IV)

^{175, 181}Hafnium(IV) was extracted by HDBP in 2-ethylhexanol from 1–10M solutions of HClO₄, HCl and HNO₃, and 1–8M H₂SO₄. As with low polar organic phase diluents, the acidity dependence of the distribution ratio of Hf, D, passes through a minimum for HClO₄, HCl, and H₂SO₄ whereas only an increase of D can be observed with increasing HNO₃ concentration. From the slope analysis the following complexes were found to be extracted (HDBP=HA): HfA₄ at <4M HClO₄ and <5M HCl, lg K_extr=9, HfX₄(HA)₄ (X=ClO ₄ ⁻ , Cl⁻ or NO ₃ ⁻ ) at >5M HClO₄, >7M HCl and 1–10M HNO₃, Hf(SO₄)A₂(HA)_3–4 at <3M H₂SO₄, and Hf(SO₄)₂ (HA)₄ at >6M H₂SO₄. Coextraction of sulphate with hafnium from H₂SO₄ solutions was evidenced in experiments with macro concentrations of Hf(IV) and³⁵SO ₄ ²⁻ . Part XX: Coll. Czech. Chem. Commun., 40 (1975) 3617.     

Pulse polarography: IX. Proton diffusion in aqueous sulphate solution

Average diffusion currents, , of the ions H₃O⁺ and HSO₄^? in the system 0.1 M K₂SO₄+H₂SO₄ (pH=3.1?3.8) have been measured at 25°C both with a dropping mercury and a rotating disk electrode, using pulse techniques. The separate diffusion coefficients D_HSO4 and D_H have been estimated fromand it was found that D_H≤61×10^?6 cm²s^?1, which is definitely less than the value calculated when relaxation and (bulk) viscosity effects are taken into account. This is at variance with all the literature D_H values for non-sulphate systems and also with our experimental result D_H=(84.6±0.2)10^?6 cm²s^?1 for the system 0.1 M KCl+HCl, which is about 7% above the value from Onsager's theory. The peculiar behaviour of D_H in a K₂SO₄ solution is attributed to a strong decrease in rotational freedom of water molecules in such a medium.This paper also gives a critical evaluation of the principle of “independent diffusion” in excess neutral electrolyte if more than one species participates in the diffusion process.     

Gold-vanadium-niobium catalysts in environmental protection—adsorption and interaction of NO, C3H6 and O2—FT-IR study

FT-IR study of NO and C₃H₆ adsorption, co-adsorption and interaction in the presence of oxygen were performed in order to estimate the catalytic behaviour of Au and V-containing MCM-41 materials in NO-SCR with propene. MCM-41 were modified with gold, vanadium and niobium by their introduction during the synthesis (co-precipitation) carried out with the use of HCl or H₂SO₄ as pH adjustment agent. The texture/structure properties of the prepared samples were investigated by N₂ adsorption, XRD, XPS and TEM techniques. It has been found that the nature of acid used for the pH adjustment during the synthesis determines the gold particles size and dispersion and influences the interaction of NO+O₂+C₃H₆ with the catalyst surfaces. In both types of AuVMCM-41 catalysts, the SCR reaction route occurs via NO₂ formation. In the case of AuVMCM-41(HCl) and AuVNbMCM-41(HCl) nitrites are formed and stored, and upon heating NO₂ is released. These kinds of nitrites are not formed on AuVMCM-41(H₂SO₄) and AuVNbMCM-41(H₂SO₄). Instead of that NO₂ is chemisorbed on metallic gold, niobium and vanadium species and reacts with propene and/or oxygenates.     

Bismuthiol II as an analytical reagent

Summary The estimation of bismuth by the reagent Bismuthiol II is studied critically. The effect of acidity, reagent concentration and interfering ions are given in detail. The maximum acidity that may be tolerated for the complete precipitation of bismuth is 0.3 N in nitric acid, 0.5 N in hydrochloric acid and 1N in sulphuric acid. Higher acidity than 0.1 N decomposes the reagent present in excess. In 0.1 N nitric acid bismuth has been separated from a number of ions like Al³⁺, Cr³⁺, Th⁴⁺, rare earths, Zr⁴⁺, Ti⁴⁺, UO₂ ²⁺, Be²⁺, Mn²⁺, Co²⁺, Ni²⁺, Mg, alkalis and alkaline earths, SO₄ ^2–, Cl^–, C₂O₄ ^2–- and from Fe²⁺ and Ce³⁺ in 0.1 N hydrochloric acid. In presence of a citrate or a tartrate it can be separated from As³⁺, Ce⁴⁺, MoO₄ ^2–- and WO₄ ^2–-at p_H 1.5 to 2.5. When Hg²⁺, Pb²⁺, Pd²⁺, Cd²⁺, Cu²⁺, Ag⁺ and Tl⁺ are present they are first precipitated by the reagent at p_H 6 to 8 in presence of a citrate or a tratrate and the bismuth is estimated gravimetrically in the acidified filtrate. Ions as F^– and PO₄ ^3– that form insoluble compounds with bismuth, Sb³⁺ and Sn²⁺ that form less soluble compounds with the reagent and Fe³⁺, VO₃ ^–, CrO₄ ^2–, AsO₄ ^3– that act as oxidising agents, interfere.     

Mono- and diprotonation of dihydropyrene, 2,7-di-tert-butyl-dihydropyrene,and their conversion to pyrenium ions; Influence of the radical cation and its potential utility in NMR assignments of the arenium ions of readily oxidizable PAHs

Parent dihydropyrene 1 and 2,7-di-tert-butyldihydropyrene 3 are monoprotonated with FSO₃H/SO₂CIF to give their persistent monoarenium ions 1H ⁺ and 3H ⁺ by the attack of proton at C-3 (peri to the ethano-bridge not at C-1 as previously suggested). Dihydropyrene 3 is diprotonated in FSO₃H.SbF₅ 1∶1 “Magic Acid”^R/SO₂CIF to give the symmetrical dication 3H ₂ ⁺², similar diprotonation of 1 with “Magic Acid”/SO₂CIF or with FSO₃H.SbF₅ (4∶1)/SO₂CIF gave the diprotonated species 1H ₂ ⁺² in a mixture. NMR characteristics of the mono- and dications are discussed. On raising temperature or on prolonged cold storage, 1H ⁺ and 3H ⁺ are converted to their corresponding pyrenium cations (2H ⁺ and 4H ⁺). Formation of 2H ⁺ from 1 is more rapid than conversion of 3 to 4H ⁺. Parent pyrenium cation was independently generated by protonation with FSO₃H/SO₂CIF. When a mixture of 2 and 1 is reacted with FSO₃H/SO₂CIF (dry ice/acetone temperature) only 2H ⁺ is seen in the NMR (concomitant presence of the radical cation 1 ⁺⁺ is inferred from EPR). Similar protonation of a mixture of 6-chlorochrysene 5 and 1 with FSO₃H/SO₂CIF leads to NMR observation of 1H ⁺ (with concomitant presence of 5 ⁺⁺); on raising temperature 1H ⁺ is converted to 2H ⁺. The nature of the paramagnetic radical cation (RC) present in the arenium ion samples influences the position, and resolution of the NMR spectra. This approach may prove useful in NMR studies of large polycyclic aromatic hydrocarbons PAHs where concomitant RC formation greatly diminishes the quality of the NMR spectra.     

Oxidations with alkaline permanganate using formic acid for back-titration: Determination of lead and thallium

Pb⁺² (~37-0.6mg) and Tl⁺ (45-0.9 mg) can bc estimated by mixing with KmnO₄ in presence of Ba⁺² ions and I_NNaOH. The excess KmnO₄ is then titrated with formic acid.A mixture of Pb⁺² and Tl⁺ is oxidized simultaneously with KMn0₄ in 0.1N NaOH. Pb⁺² interferes also when precipitated as sulphate or tellurate. In presence of SO₄^-2 and telluric acid, thallium can be titrated only when its concentration is not less than 30 mg, below which lead seriously interferes. Tl⁺ can be accurately determined in the filtrate from the PbS0₄ precipitate.     

Synthesis and reactivity of formamidinato rhodium(I) complexes

The syntheses of [Rh(diol)(formamidine)]₂ complexes (diol  cycloocta-1,5-diene (1); diol  norbornadiene (2); formamidine  N,N′-di-p-tolylformamidine) are reported. These complexes are dimeric and contain the bridging formamidino ligand. They react with CO, dppe and PPh₃ with displacement of the diene ligand to yield the known [Rh(CO)₂(formamidine)]₂, [Rh(dppe)₂]⁺ and [Rh(PPh₃)₂(formamidine)], respectively; the last complex, in which the formamidine acts as a chelating ligand, was isolated only as the O₂ adduct. With HCl or HBF₄ aqueous 1 and 2 do not form hydrides but instead the formamidino cation [p-tolyl-NHCHNHtolyl-p]⁺ and the complexes [Rh(diol)X]₂ (X  Cl, F); a possible scheme for the reaction with HCl is proposed. The [Rh(C₈H₁₂)(formamidine)]₂ complex reacts with heterocumulenes as CS₂, SO₂, PhNCS and PhNCO with diene displacement; the only product isolated was [Rh(CS₂)₂(formamidine], to which a polymeric structure is assigned.     

Tributylammonium Halochromates/silica Gel:Simple Reagents for Oxidative Coupling of Thiols to Symmetrical Disulfides

New orange solid tributylammonium halochromates, (C₄H₉)₃N⁺CrO₃X^?, TBAXC (X=F, Cl) are easily synthesized by the reaction of tributylammonium fluoride and chloride with CrO₃ in a 1:1 molar ratio in the presence of HF and HCl. Tributylammonium halochromates(VI) are versatile reagent for the effective and selective oxidation of organic substrates. Silica gel supported TBAFC and TBACC are versatile reagents for the effective and selective oxidation of organic substrates, in particular, thiols, under mild conditions. Considerable improvements are observed in the presence of the absorbent, making the work‐up much more convenient.     

Formation of extractable species from metal sulfate and amine chlorides

The extraction of Fe, Zn and In by La₂HCl from H₂SO₄ solutions has been studied. The formation of the aqueous complexes H₂Fe(SO₄)₂HSO₄, HZn(SO₄)HSO₄ and HInSO₄(HSO₄)₂ is discussed. The formation of mixed ligand species H₂Fe(SO₄)₂Cl, HZnSO₄Cl and HInSO₄Cl₂ from the interaction of Cl⁺ in aqueous solution or in LA₂HCl before extraction is explained. The reactions in the system to produce the extractable species are discussed. The possible separations are given.