Oxidation of organic substances with compounds of trivalent manganese: XXIII. Preparation,stability, and determination of the titer of standard solutions of the fluoride complex of trivalent manganese

A method of preparation of 10^?2 ?10^?3M standard solutions of the fluoride complex of manganese(III) by the reaction of manganese(II) with permanganate in a medium of potassium fluoride acidified with sulfuric acid has been developed. It has been found that in a medium of 1 M sulfuric acid, 0.5 M manganese(II) sulfate, and 0.1 M potassium fluoride these solutions are sufficiently stable for both direct and indirect titrimetric determinations. The titer was determined using potassium iodide as a primary standard and potentiometric, bipotentiometric, or biamperometric titration.     

Radiation chemistry of Cu(II) tetrasulfophthalocyanine in water-methanol system

The effect of ionising radiation on copper(II) phthalocyanine 3,4′,4′′,4′′′ tetrasulfonic acid, tetrasodium salt (Cu(II)tspc^4-) in aqueous as well as in water-methanol solutions has been studied. The determined yields of complex decomposition (measured on the basis of absorption decay) depend on the composition of matrices and the dose applied. The rate constant of electron scavenging by Cu(II)tspc^4-, k = (1.3 ± 0.1) × 10¹⁰ M^-1 s^-1 in methanol-water (2:8 v/v) solutions has been determined using the pulse radiolysis technique. The rate constant k = (1.16 ± 0.1) × 10¹⁰ M^-1 s^-1 of scavenging of OH radicals applying the competion method with p-nitrosodimethylaniline (pNDA) has been determined in aqueous solutions.     

Determination of electrochemical kinetic parameters by square-wave polarography: Polarographic reduction of Zn(II) in 1 M KCl,KBr, and KNCS solutions

A new method of determining electrochemical kinetic parameters by square-wave polarography was presented, in which the faradaic current at θ/2, θ being the half-period of superimposed square-wave voltage, was used for the analysis. The method gave the following kinetic parameters for the electrode reaction, Zn(II) + 2e(Hg), in aqueous solutions at 25° C: k_c^θ=0.0052 cm s^?1 and α_c=0.36 in 1 M KCl, k_c^θ=0.011 cm s^?1 and α_c=0.30 in 1 M KBr, and k_c^θ=0.020 cm s^?1 and α_c=0.52 in 1 M KNCS. Induced adsorption of Zn(II) on the dropping mercury electrode was suggested in solutions containing thiocyanate ions.     

Synthesis and characterization of group 12 complexes of N,N-methyl phenyl-N,N-butyl phenyl dithiocarbamate

Zn(II), Cd(II), and Hg(II) complexes of N-methyl-N-phenyl dithiocarbamate (L¹) and N-butyl-N-phenyl dithiocarbamate (L²) formulated as ML¹L² have been synthesized and characterized by elemental analysis, FT–IR, ¹H- and ¹³C-NMR spectroscopic techniques. Single-crystal X-ray structures of the Zn(II) and Hg(II) complexes are also reported. X-ray crystal structures revealed that in the zinc(II) complex, the dithiocarbamate is chelating and bridging, forming eight-member rings, while the Hg complex is monomeric with bidentate dithiocarbamate. In both complexes, the metals are in distorted tetrahedral geometry and the methyl and butyl groups of the dithiocarbamates exhibit compositional disorder between two positions.     

Quantification of ziram and zineb residues in fog-water samples

The present paper describes the extractive quantification of zinc-dithiocarbamate fungicides, i.e. ziram (zinc bis-dimethyldithiocarbamate) and zineb (zinc ethylene-1,2-bis-dithiocarbamate) in fog-water samples. The method is based on the releasing of equivalent amount of zinc from the fungicides and its subsequent determination by visible spectrophotometry or by flame-atomic absorption spectrometry (flame-AAS). For spectrophotometry, the sample contained up to 48 μg of ziram and 42 μg of zineb was first equilibrated with chloroform. The recovery results show that only ziram content was extracted into chloroform. Then, the sample was treated with NH₄SCN and surfactants (i.e. CPC and TX-100) solutions, and extracted with toluene to remove interference of inorganic zinc and other metal ions, if present in the sample. The residue was further used for zineb determination. The chloroform extract and residue were then digested separately with nitric acid to release Zn(II), which were then analyzed spectrophotometerically with 4-(2-pyridylazo)-resorcinol in the micellar medium (TX-100) for the determination of ziram and zineb, respectively. The complex shows λ_max at 495 nm. The molar absorptivity in terms of ziram/zineb was determined to be (8.05) × 10⁴ L mole⁻¹ cm⁻¹. The detection limits for ziram and zineb were calculated to be 20 and 21 μg L⁻¹ (with R.S.D. < 1.5%), respectively. Whereas, the optimum concentration ranges were 0.08-1.6 and 0.07-1.4 mg L⁻¹, respectively. Alternatively, the Zn contents present in chloroform extract and in residue were directly analyzed using flame-AAS without undergoing the digestion procedure, and ziram and zineb were determined, respectively. The optimum concentration ranges were 0.9-4.8 and 0.8-4.3 mg L⁻¹, while the detection limits were calculated to be 145 and 144 μg L⁻¹, respectively with R.S.D. < 2.5%. The methods are free from interference of almost all ions [including Zn(II)] and other dithiocarbamate pesticides, which can commonly associate with ziram/zineb in fog-water.     

Diorganotin(IV) dithiocarbamate complexes as chromogenic sensors of anion binding

One dinuclear chlorodiphenyltin (IV) dithiocarbamate complex (1) and four mononuclear complexes of general formula Ph₂Sn(S₂CNR)Cl (2, 3, 5, and 6) have been synthesized and characterized both in solid-state and solution. X-ray structures for complexes 1, 3 and 6 demonstrated a five-coordination geometry around of tin atoms, in which dithiocarbamate ligand chelates asymmetrically the metal center. As shown by ¹¹⁹Sn NMR spectroscopy, five-coordination geometry observed in the solid-state remains in solution. The stability of these chlorodiphenyltin(IV) dithiocarbamate complexes in the presence of biologically relevant anions such as acetate, dicarboxylates of general formula ^?OOC-(CH₂)_n-COO^? (n = 2–8), dihydrogenphosphate, hydrogensulfate, and halides has been examined in acetonitrile solutions. For all of these organotin(IV) complexes the displacement of the coordinated ligands (i.e., chloride and dithiocarbamate) from the organotin(IV) moiety occurred in the presence of monoanions like acetate, dihydrogenphosphate, hydrogensulfate and fluoride. A stepwise mechanism for ligand exchange is proposed based on UV–Vis, ¹H, ¹³C and ¹¹⁹Sn spectroscopic data, as well as mass spectrometry. From UV–Vis titration experiments it was found that dicarboxylates with small spacers like malonate and succinate, acted differently in the exchange of the dithiocarbamate group in comparison to other monoanionic O donor ligands or dicarboxylates with longer chains, perhaps by following an intramolecular displacement of the coordinated ligand.The lability of these organotin(IV) dithiocarbamate compounds in solution hampers their use as stably host for anions, however, by taking advantage of the intrinsic chromogenic properties of free dithiocarbamate anions, or by attaching dithiocarbamate groups to well-known fluorescent moieties such as antracene, these complexes can sense the presence of O-donor anions at very low concentrations by displacement of the metal-coordinated dithiocarbamate.     

Synthesis, structural and spectral properties of novel octakis(3,5-bis-trifluoromethyl-benzylthio) substituted porphyrazine derivatives

[Octakis(3,5-bis-trifluoromethyl-benzylthio)porphyrazinato] magnesium carrying eight (3,5-bis-trifluoromethyl-benzylthio) groups on the peripheral positions have been synthesized by cyclotetramerization of 1,2-bis(3,5-bis-trifluoromethyl-benzylthio)maleonitrile in the presence of magnesium butanolate. Its demetalation by the treatment with trifluoroacetic acid resulted in the metal-free derivative. Further reaction of this product with copper(II) acetate, zinc(II) acetate and cobalt(II) acetate have led to the metallo derivatives M = Cu(II), Zn(II), Co(II). These novel complexes were characterized by elemental analysis, together with FT-IR, ¹H NMR, ¹³C NMR, ¹⁹F NMR, UV-vis and mass spectral data.     

Coordination compounds of some d metals with anthrapyridinedione derivatives: Crystal structure of 2-phenyl-4-(piperidyl-1)-anthra[1,2-b]pyridine-7,12-dionium hexabromodicuprate(II) (HL1)2[Cu2Br6]

Complexes of copper(II), nickel(II), and cobalt(II) chlorides and bromides with 2-phenyl-4-(piperidyl-1)-anthra[1,2-b]pyridine-7,12-dione (L¹) and 2-[phenyl-4-(octylamino)-anthra[1,2-b]pyridine-7,12-dione (L²) were synthesized from neutral and acidic media. The molecular and crystal structure of 2-phenyl-4-(piperidyl-1)-anthra[1,2-b]pyridine-7,12-dionium hexabromodicuprate(II) (HL¹)₂[Cu₂Br₆] was determined by X-ray diffraction analysis. The spectral characteristics of L¹ and L² and their complexes are presented. Formation of their complexes in solutions was studied.     

Effect of halides and alkali cations on the Zn(Hg)/Zn(II) electrode reactions

The title subject has been studied by galvanostatic single-pulse, chronopotentiometric and equilibrium measurements on the Zn(Hg)/Zn(II) electrode in x M KI+(1?x) M KCl (x from 0 to 1), 1 M KBr and 1 M MeCl (Me=Li, Na, K and Cs) solutions of pH 3 at 25°C. Quantitative information about the effect of specifically adsorbed halides on the rates of the Zn(II)/Zn(I) and the Zn(I)/Zn(Hg) steps is obtained separately (for the latter step mainly at potentials near ?1.0 V(SCE)), and the latter step seems to be more influenced than the former by the adsorption. An attempt is made to correlate the adsorption effect on the rate of the Zn(II)/Zn(I) step to double-layer parameters according to recent models for such effects. The extra current observed at potentials where the halides are adsorbed, seems to vary with the surface activity of the specifically adsorbed ion. The lack of any observed kinetic effect of Cs⁺, which is specifically adsorbed at these potentials, is possibly due to the Cs⁺ specific adsorption enhancing the Cl^? specific adsorption and vice versa, so that the decelerating and accelerating effects by these ions may cancel each other.     

Heterodinuclear ruthenium(II) bipyridyl-transition metal dithiocarbamate macrocycles for anion recognition and sensing

New heterodinuclear ruthenium(II) bipyridyl-transition metal dithiocarbamate macrocycles have been prepared in good yields via metal directed self-assembly and shown to recognise anions. ¹H NMR anion titration studies reveal the nature of the bipyridyl amide metal dithiocarbamate spacer unit in the respective dinuclear metal macrocycle influences significantly the strength of chloride and bromide complexation in DMSO solutions. Luminescence spectroscopy was used to sense anions in polar organic solutions via notable emission enhancement and quenching of the respective ruthenium(II) bipyridyl groups in the receptors.     

Uranyl oxamate hydrates: hydrothermal synthesis,crystal structure,photophysical properties,and selective crystallization

Presented here are two isostructural uranyl coordination polymers [UO₂(EDO)(H₂O)]·H₂O (1) and [UO₂(BDO)(H₂O)]·2H₂O (2) (EDO^2-=ethylene-1,2-dioxamate; BDO^2-=butylene-1,2-dioxamate) with identical stepwise zigzag chain structure and distinct interchain hydrogen bonding interaction, prepared from hydrothermal reaction of DEEDO or DEBDO (DEEDO=diethyl ethylene-1,2-dioxamate; DEBDO=diethyl butylene-1,2-dioxamate) with uranyl ions. The monomeric uranyl-based fluorescence emissions of compounds 1 and 2 are red-shifted by about 6 and 5 nm respectively, compared to that of uranyl nitrate hexahydrate. Compound 1 has stronger emission than compound 2, but both their emissions exhibit triple-exponential decay. The photophysics of uranyl oxalate trihydrate was also investigated for comparison. The selective crystallization of compound 1 in alkaline solution was applied to the sequestration of uranyl ions, showing a kinetic preference.     

Electrode processes of Cr(II) in non-complexing and complexing media

The formal potentials and the kinetics parameters for the electrode process: Cr²⁺+2 e⁻ = Cr^o occurring at a mercury electrode in solutions of NaClO₄, NaCI, NaBr, and NaSCN, were determined from the analysis of irreversible anodic and cathodic chronocoulometric waves. The interaction of Cr(II) with Cl⁻ was found to be negligible (equilibrium constant K <1) whereas the interaction with Br⁻ and SCN⁻ was weak (K₁(Br⁻)=1 M⁻¹ and β₂(SCN⁻) = 25 M⁻²). The results of the analysis of the formal rate constant of this and other amalgam forming reactions suggested that the formation of amalgam was the most important step in the whole process.     

The UV spectra of ethylene-1, 2-bisdithiocarbamates

In the uv spectra of ethylene-1,2-bisdithiocarbamates (EDTC) three very intensive bands at about 207, 260 and 285 nm, and one of low intensity at about 340 nm are found. All of them blue shift with increasing of the solvent polarity The 340 nm band is ascribed to an Π^*←n transition, while the bands at about 260 and 285 nm are attributed to Π^*←Π transitions.     

Immobilization of (dd)heteronuclear hexacyanoferrates(II) in a gelatin matrix

The data concerning a possibility of the synthesis (dd)heteronuclear hexacyanoferrates(II) with (M¹)^II and (M²)^II ions (M¹, M² = Mn, Co, Ni, Cu, Zn, or Cd) due to the contact of M¹ ₂[Fe(CN)₆] immobilized in the gelatin matrix with aqueous solutions of M²Cl₂ chlorides, were systematized and generalized. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 8–17, January, 2008.     

Synthesis,structure and magnetic properties of mono- and di-nuclear nickel(II) thiocyanate complexes with tridentate N3 donor Schiff bases

The 1:1 condensation of N-methyl-1,3-diaminopropane and N,N-diethyl-1,2-diminoethane with 2-acetylpyridine, respectively at high dilution gives the tridentate mono-condensed Schiff bases N-methyl-N′-(1-pyridin-2-yl-ethylidene)-propane-1,3-diamine (L¹) and N,N-diethyl-N′-(1-pyridin-2-yl-ethylidene)-ethane-1,2-diamine (L²). The tridentate ligands were allowed to react with methanol solutions of nickel(II) thiocyanate to prepare the complexes [Ni(L¹)(SCN)₂(OH₂) (1) and [{Ni(L²)(SCN)}₂] (2). Single crystal X-ray diffraction was used to confirm the structures of the complexes. The nickel(II) in complex 1 is bonded to three nitrogen donor atoms of the ligand L¹ in a mer orientation, together with two thiocyanates bonded through nitrogen and a water molecule, and it is the first Schiff base complex of nickel(II) containing both thiocyanate and coordinated water. The coordinated water initiates a hydrogen bonded 2D network. In complex 2, the nickel ion occupies a slightly distorted octahedral coordination sphere, being bonded to three nitrogen atoms from the ligand L², also in a mer orientation, and two thiocyanate anions through nitrogen. In contrast to 1, the sixth coordination site is occupied by a sulfur atom from a thiocyanate anion in an adjacent molecule, thus creating a centrosymmetric dimer. A variable temperature magnetic study of complex 2 indicates the simultaneous presence of zero-field splitting, weak intramolecular ferromagnetic coupling and intermolecular antiferromagnetic interactions between the nickel(II) centers.     

The electrochemical behaviour of cobalt in alkaline solutions Part I. The potentiodynamic response in the potential region of the Co/CoO couple

The potentiodynamic response of cobalt in KOH solutions (10^?2M?c?2.5 M) in the potential range of the thermodynamic stability of the Co(II) species reveals two limiting electrochemical behavirours. One of them corresponds to the first potentiodynamic scan and the other is associated with the stabilized E/I profile resulting after a prolonged potential scanning. The former is related to the large contribution of the metal electrodissolution process. The second is explained in terms of reactions taking place at the sandwich-type structured interface. Ageing effects of Co(II) surface species are also considered in the interpretation of results.     

Synthesis, structural characterization and selectively catalytic properties of metal-organic frameworks with nano-sized channels: A modular design strategy

Modular design method for designing and synthesizing microporous metal-organic frameworks (MOFs) with selective catalytical activity was described. MOFs with both nano-sized channels and potential catalytic activities could be obtained through self-assembly of a framework unit and a catalyst unit. By selecting hexaaquo metal complexes and the ligand BTC (BTC=1,3,5-benzenetricarboxylate) as framework-building blocks and using the metal complex [M(phen)₂(H₂O)₂]²⁺ (phen=1,10-phenanthroline) as a catalyst unit, a series of supramolecular MOFs 1-7 with three-dimensional nano-sized channels, i.e. [M¹(H₂O)₆]·[M²(phen)₂(H₂O)₂]₂·2(BTC)·xH₂O (M¹, M²Co(II), Ni(II), Cu(II), Zn(II), or Mn(II), phen=1,10-phenanthroline, BTC=1,3,5-benzenetricarboxylate, x=22−24), were synthesized through self-assembly, and their structures were characterized by IR, elemental analysis, and single-crystal X-ray diffraction. These supramolecular microporous MOFs showed significant size and shape selectivity in the catalyzed oxidation of phenols, which is due to catalytic reactions taking place in the channels of the framework. Design strategy, synthesis, and self-assembly mechanism for the construction of these porous MOFs were discussed.     

The electrochemical Peltier effect observed with electrode reactions of Fe(II)/Fe(III) redox couples at a gold electrode

The electrochemical Peltier effect was studied at a gold electrode in solutions containing some Fe(II)/Fe(III) redox couples by measuring the local temperature change in the electrode/solution interphase under controlled-potential and controlled-current polarization. Relative values of the electrochemical Peltier coefficient for the cathodic process at equilibrium potential, which is denoted by (Π_c)_I=0, were determined by analyzing the observed temperature change as a function of current. The values of (Π_c)_I=0 were found to be positive for the Fe(H₂O)₆²⁺/Fe(H₂O)₆³⁺ systems in HClO₄ (1 M), HNO₃ (1 M), H₂SO₄ (0.5 M), and HCl (1 M), their magnitudes being very similar in the first three acid solutions, but smaller in the HCl solution. On the other hand, a negative value of (Π_c)_I=0 was obtained in the case of a Fe(CN)₆^4?/Fe(CN)₆^3? couple in a H₂SO₄ (0.5 M) solution. Such a difference in the Peltier coefficient is considered to be due to the difference in the ionic species of iron involved in the electrode reaction.     

Surface characterization by underpotential deposition: Lead on gold surfaces

The kinetics of chelation of Pb(II), Zn(II) and Cd(II) with the ligand EDTA have been followed at the realistic trace concentration level 10^?8–10^?7M for both reactants in sea water and model solutions of its major salinity components by differential pulse stripping voltammetry. In this manner the specific influences of the salinity components on the formation rate constants [having in sea water for PbEDTA the order of 3×10³ and for the EDTA chelates of Zn(II) and Cd(II) of 3×10² l M^?1 s^?1] could be determined. The measurements emphasize the pronounced specific influences of Ca(II) on the kinetics and course of the trace metal chelation in media where this alkaline earth ion is present in substantial excess to organic chelating agents. The experiments with EDTA are to be regarded as a close simulation of the chelation processes occurring for the trace metals studied by components with suitable chelation power of dissolved organic matter (DOM) in the sea and the resulting conclusions on the mechanism are thus of general significance.     

Inhibitory Effects of p-Phenylene-bis and Phenyl Dithiocarbamate on Mushroom Tyrosinase

The binding properties and structural changes of mushroom tyrosinase enzyme, MT, due to its interactions with phenyl dithiocarbamate (I) and p-phenylene-bis dithiocarbamate (II), were investigated at 27 and 37 °C in phosphate buffer (10?mmol?L^?1) at pH = 6.8 by isothermal titration calorimetric (ITC). The extended solvation model was used to calculate the solvation parameters, which were attributed to the stability of this enzyme. Thermodynamic analysis indicated that the predominant mode of interaction was hydrophobic in the binding of compound I to MT, while the binding of II to MT essentially depends on electrostatic interactions. It seems that II is a more potent MT inhibitor due to its two charged head groups that are able to chelate copper ions in the active enzyme site. It was concluded that MT has two distinct sites for p-phenylene-bis and phenyl dithiocarbamate.