季鏻盐型三相相转移催化剂的制备及其化学结构与相转移催化活性的关系

 使用两种 ω-氯代酰氯 (氯乙酰氯与氯丁酰氯) 对交联聚苯乙烯微球 (CPS) 进行 Friedel-Crafts 酰基化反应,使用 1,4-二氯甲氧基丁烷对 CPS 微球进行氯甲基化反应, 分别将可交换的氯引入 CPS 微球表面, 制备了化学改性的 CPS 微球. 然后使用三苯基膦对改性微球进行季鏻化反应, 制备了间隔臂 (spacer arm) 长度不同的三种季鏻 (QP) 盐型三相相转移催化剂 QP-CPS. 考察了主要反应条件对制备过程的影响, 并以氯化苄与乙酸钠合成乙酸苄酯的反应体系作为三相相转移催化的模型体系, 初步考察了 QP-CPS 的相转移催化活性,探索了催化剂结构与相转移催化活性的关系. 结果表明, 季鏻盐的化学稳定性较差,在制备过程中需控制反应时间与温度, 且宜选用极性较高的溶剂. 季鏻盐型三相相转移催化剂 QP-CPS 对乙酸苄酯的合成具有较高的催化活性, 在液-固-液之间可有效地实现反应物种乙酸根的转移. 与季铵盐 (QN) 型三相相转移催化剂 QN-CPS 相比, 季鏻盐型三相相转移催化剂 QP-CPS 具有更高的相转移催化活性. 间隔臂越长, QP-CPS 的相转移催化活性越高, QP-CPS 的亲水和亲油性能对相转移催化活性也有很大的影响.     

Synchronously synthesizing and immobilizing porphyrins on crosslinked polystyrene microspheres and preliminary study on catalytic activity of supported metalloporphyrins

A novel method for immobilizing porphyrins as well as metalloporphyrins (MPs) on polymeric supports was found, and it is the way to synchronously synthesize and immobilize porphyrins on polymeric microspheres. By using 4‐hydroxybenzaldehyde (HBA)‐bound crosslinked polystyrene (CPS) microspheres, pyrrole, and benzaldehyde in a solution as co‐reactants and through the Adler's reaction between solid–liquid phases, it was successfully realized to simultaneously synthesize and immobilize phenyl porphyrin (PP) on CPS microspheres, resulting in PP‐supported microspheres PP–CPS. With the same method, substituted PPs, 4‐chlorophenyl porphyrin (CPP) and 4‐nitrophenyl porphyrin (NPP), were also successfully immobilized on CPS microspheres by using substituted benzaldehydes, 4‐chlorobenzaldehyde and 4‐nitrobenzaldehyde, as one reactant in the solution, respectively, and other two porphyrin‐supported microspheres, CPP–CPS and NPP–CPS, were obtained. The effects of various factors on the process of synchronously synthesizing and immobilizing porphyrins on CPS microspheres were mainly studied. Further, the coordination reaction of cobalt salt with PP–CPS as well as CPP–CPS and NPP–CPS was conducted, forming three solid catalysts, CoPP–CPS, CoCPP–CPS, and CoNPP–CPS. The catalytic properties of these catalysts in the catalytic oxidation of ethylbenzene to acetophenone by dioxygen were preliminarily examined. The experimental results indicate that the Adler's reaction between solid–liquid phases, namely the reaction between HBA‐bound CPS microspheres and pyrrole as well as free benzaldehyde or analogs in the solution can favorably be carried out. For this process, the fitting protonic acid catalyst is p‐nitrobenzoic acid and appropriate solvent is dimethyl sulfoxide (DMSO). By comparison, the process of preparing CPP–CPS microspheres is easier to be carried out. The obtained three solid catalysts can effectively catalyze the oxidation of ethylbenzene to acetophenone by dioxygen. In comparison, the catalytic activity of CoNPP–CPS is the highest. Copyright © 2009 John Wiley & Sons, Ltd.     

Realizing porphyrin‐functionalization of crosslinked polystyrene microspheres via two special polymer reactions

A novel route to make crosslinked polystyrene (CPS) microspheres to be porphyrin‐functionalized via two special polymer reactions, Kornblum reaction and Adler reaction, was designed and founded. The chloromethyl groups of chloromethylated crosslinked polystyrene (CMCPS) microspheres were first oxidized to aldehyde groups by dimethyl sulfoxide as oxidant via Kornblum oxidation reaction, obtaining aldehyde group‐modified microspheres, ALCPS microspheres, in which, a great quantity of benzaldehyde groups suspend from the main chain, and the effects of the main factors including the reaction temperature, the addition of KI as catalyst and the used amount of NaHCO₃ as acid acceptor on the oxidation reaction were examined. Subsequently, the synchronic synthesizing and immobilizing of porphyrins on CPS microspheres were carried out via the Adler reaction between solid and liquid phases, in which, ALCPS microspheres, pyrrole and benzaldehyde or benzaldehyde analog in a solution were used as co‐reactants, resulting in porphyrin‐functionalized microspheres, and the influence of diverse factors including the acidity of the protonic acid catalyst, the substituent structure of benzaldehyde analog, and the polarity of the solvent as well as the swelling property of the solvent for CPS microspheres on the process of synchronously synthesizing and immobilizing porphyrins on CPS microspheres were investigated in depth. The experimental results indicate that via the designed route, the porphyrin‐functionalization of CPS microspheres can successfully be realized. For the Kornblum oxidation reaction, under the optimal reaction conditions, the conversion of chloromethyl groups can reach 90%. For the Adler reaction between solid and liquid phases, the fitting protonic acid catalyst is lactic acid, appropriate solvent is a mixture of dimethyl sulfoxide and xylene, and using 4‐chlorobenzaldehyde as a benzaldehyde analog reactant in the solution is in favor of the porphyrin‐functionalization of CPS microspheres. Under these specific conditions, the immobilized amount of porphyrin can get up to 23.33 mmol/100 g. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydroxylation of cyclohexane with molecular oxygen catalyzed by highly efficient heterogeneous Mn(III) porphyrin catalysts prepared by special synthesis and immobilization method

A novel method to synthesize and immobilize porphyrins as well as manganese porphyrins on crosslinked polystyrene (CPS) microspheres was designed. The chloromethyl groups of chloromethylated CPS microspheres (CMCPS microspheres) were first oxidized to aldehyde groups via Kornblum oxidation reaction, obtaining aldehyde group-functionalized microspheres, and then, the synchronous synthesis and immobilization of porphyrins on CPS microspheres were carried out via the Adler reaction between solid–liquid phases, obtaining three kinds of functional microspheres, on which phenyl porphyrin (PP), p-chlorophenyl porphyrin (CPP) and p-nitrophenyl porphyrin (NPP) were immobilized. Finally, three manganese porphyrin-immobilized microspheres, MnPP–CPS, MnCPP–CPS and MnNPP–CPS, were prepared, these solid catalysts were used in the catalytic hydroxylation reaction of cyclohexane with molecular oxygen as oxidant, and their catalytic performances were mainly investigated in this work. Some surprising experimental results were obtained. The prepared immobilized manganese porphyrin catalysts display amazing catalytic activity and selectivity, and cyclohexane conversion can get up to 45?% and cyclohexanol selectivity in the reaction product can be up to 90–100?%.     

Temperature‐sensitive hydrogel microspheres formed by liquid–liquid phase transitions of aqueous solutions of poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate)

Poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate) (DMA‐co‐AMA) copolymers were prepared by the copolymerization of N,N‐dimethylacrylamide with allyl methacrylate (AMA). The methacryloyl group of AMA reacted preferentially, and this resulted in pendant allyl groups along the copolymer chains. Aqueous solutions of these DMA‐co‐AMA copolymers were thermoresponsive and showed liquid–liquid phase transitions at temperatures that depended on the AMA content. Hydrogel microspheres were prepared from these thermally phase‐separated liquid microdroplets by the free‐radical crosslinking of the pendant allyl groups. The morphologies of the resulting thermoresponsive microspheres as a function of the reaction temperature and the amount of the initiator were examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1641–1648, 2005     

Synthesis and Characterization of Novel Phthalimide‐pyrano[3,2‐c]chromene and Phthalimide‐pyrano‐2‐one Hybrids

Coumarin skelton holds substantial promise for further exploration because of its immense pharmacological potential. In this pursuit, a series of phthalimide‐chromen and phthalimide‐pyran‐2‐one hybrids were synthesized in efficient yields via one‐pot multicomponent reaction of aldehyde linked to phthalimide moiety, 4‐hydroxy coumarin/4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, and malanonitrile by Knoevenagel reaction at room temperature in the presence of DABCO as catalyst. The compounds were characterized by ¹H NMR and ¹³C NMR, MS, and FTIR. All the compounds consisting of phthalimide‐chromen/pyrano‐2‐one moieties tethered by spacers of varying lengths were evaluated for their biological activity in Ellman's assay. Most of the compounds feebly inhibited Acetylcholinesterase Enzyme and were inactive toward Butyrylcholinesterase Enzyme.     

Practical and Phase Transfer–Catalyzed Synthesis of 6‐Methoxytryptamine

A convenient and cost‐effective synthesis of 6‐methoxytryptamine (1), starting from commercially available phthalimide and 1‐bromo‐3‐chloropropane via PTC N‐alkylation, PTC C‐alkylation, Japp–Klingemann reaction, hydrolysis, and decarboxylation, has been accomplished with a 44% overall yield.     

Effects of the reaction parameters on the properties of thermosensitive poly(N‐isopropylacrylamide) microspheres prepared by precipitation and dispersion polymerization

Poly(N‐isopropylacrylamide) (PNIPAAm)‐based microspheres were prepared by precipitation and dispersion polymerization. The effects of several reaction parameters, such as the type and concentration of the crosslinker (N,N′‐methylenebisacrylamide or ethylene dimethacrylate), medium polarity, concentration of the monomer and initiator, and polymerization temperature, on the properties were examined. The hydrogel microspheres were characterized in terms of their chemical structure, size and size distribution, and morphological and temperature‐induced swelling properties. A decrease in the particle size was observed with increasing polarity of the reaction medium or increasing concentration of poly(N‐vinylpyrrolidone) as a stabilizer in the dispersion polymerization. The higher the content was of the crosslinking agent, the lower the swelling ratio was. Too much crosslinker gave unstable dispersions. Although the solvency of the precipitation polymerization mixture controlled the PNIPAAm microsphere size in the range of 0.2–1 μm, a micrometer range was obtained in the Shellvis 50 and Kraton G 1650 stabilized dispersion polymerizations of N‐isopropylacrylamide in toluene/heptane. Typically, the particles had fairly narrow size distributions. Copolymerization with the functional glycidyl methacrylate monomer afforded microspheres with reactive oxirane groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 968–982, 2006     

H3PW12O40/mpg‐C3N4 as an efficient and reusable catalyst in the alkylation of o‐xylene and styrene

A heterogeneous catalyst (HPW/mpg‐C₃N₄) for the alkylation of o‐xylene and styrene reaction was acquired by the immobilization of phosphotungstic acid (HPW) on mesoporous graphitic carbon nitride (mpg‐C₃N₄) through electrostatic interaction. The results of Fourier transform infrared spectroscopy (FT‐IR), X‐ray powder diffraction (XRD), X‐ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) proved that HPW was successfully immobilized on the protonated mpg‐C₃N₄ by electrostatic interaction. The textural properties and morphology of HPW/mpg‐C₃N₄ were characterized by N₂ adsorption–desorption, scanning electron microscopy (SEM). Among them, 40% HPW/mpg‐C₃N₄ displays the best catalytic performance in the alkylation reaction with 91.8% yield and 96.5% selectivity to 1, 2‐diphenylethylane. Moreover, protonated mpg‐C₃N₄ not only displays as a support to facilitate great dispersion of HPW but also promotes the alkylation product diffusion effectively. Besides, the HPW/mpg‐C₃N₄ catalyst could be recycled easily without significant loss of catalytic activity, which is demonstrate by the recyclability of HPW/mpg‐C₃N₄ catalyst test.     

Kinetics of the reaction of 4,4′‐biphenol with bromoethane and 1‐bromobutane by phase‐transfer catalysis

The reaction of 4,4′‐biphenol and two species of bromoalkanes (e.g., bromoethane and 1‐bromobutane) to synthesize two symmetric products (4,4′‐diethanoxy biphenyl and 4,4′‐dibutanoxy biphenyl) and one asymmetric product (4‐ethanoxy, 4′‐butanoxy biphenyl) was successfully carried out under two‐phase phase‐transfer catalysis conditions. A rational mechanism and kinetic model were built up by considering the reactions both in aqueous phase and in organic phase. The first active catalyst (QO(Ph)₂OQ) was also synthesized under two‐phase reaction and was identified by instruments. The experimental data were explained satisfactorily by the pseudo‐steady‐state hypothesis. Two sets of rate constants of organic reactions, i.e. primary (k₁ and k₂) and secondary (k₁₁, k₁₂, k₂₁, and k₂₂) rate constants participate in the kinetic model. The two primary rate constants were obtained individually via experimental data for synthesizing the symmetric products. The ratios of the other four secondary rate constants were obtained from the reaction of synthesizing asymmetric products and determined from the initial yield rates of symmetric products. The effects of the ratio of bromoethane and 1‐bromobutane, temperature, organic solvents, amount of catalyst, and amount of sodium hydroxide on the reaction rate and the selectivity of products were investigated in detail. The results were explained satisfactorily by the interaction between the reactants and the environmental species. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 139–153, 2003     

C9 Fraction Alkylation Desulfurization over Amberlyst 36 Resin:The Kinetics of 2‐Ethylthiophen, 2,5‐Dimethylthiophene,and 2‐n‐Propylthiophene with Isoamylene

C₉ fraction is the by‐products of catalytic reforming and ethylene cracker; it is considered as a kind of petroleum resin raw material. Recently, it was studied for the use as a gasoline additive to enhance the economic benefits. However, C₉ fractions are getting higher in sulfur contents. As conventional hydrotreating technology leads to significant octane number loss and processing costs, the alkylation desulfurization process, which could reduce the sulfuric compounds to hydrogen sulfide by catalytic alkylation with olefins and distillation followed by, is a rather attractive way of reducing the sulfur of C₉ fraction. In this paper, different kinds of thiophenic compounds, including 2‐ethylthiophen, 2,5‐dimethylthiophene, and 2‐n‐propylthiophene, were selected as the model compounds. Thiophenic compounds were studied first by the alkylation reaction over macroporous sulfonic resin Amberlyst 36, and the octane number of C₉ fraction was measured. It was found that isoamylene and Amberlyst 36 resin had a significant effect on the alkylation desulfurization of thiophenic compounds with the conversion, reaching to above 99%. And the octane number of C₉ fraction was increased by alkylation desulfurization over Amberlyst 36 resin. Moreover, the alkylation of thiophenic sulfurs could be described as a pseudo–first–order reaction as well as the reaction rate constant, and the activation energy of alkylation reactions was calculated.     

Magnetic poly(N‐propargylacrylamide) microspheres: Preparation by precipitation polymerization and use in model click reactions

Magnetic poly(N‐propargylacrylamide) (PPRAAm) microspheres were prepared by the precipitation polymerization of N‐propargylacrylamide (PRAAm) in a toluene/propan‐2‐ol medium in the presence of magnetic nanoparticles (oleic acid‐coated Fe₃O₄). The effects of several polymerization parameters, including the polarity of the medium, polymerization temperature, the concentration of monomer, and the amount of magnetite (Fe₃O₄) in the polymerization feed, were examined. The microspheres were characterized in terms of their morphology, size, particle‐size distribution, and iron content using transmission and scanning electron microscopies (TEM and SEM) and atomic absorption spectroscopy (AAS). A medium polarity was identified in which magnetic particles with a narrow size distribution were formed. As expected, oleic acid‐coated Fe₃O₄ nanoparticles contributed to the stabilization of the polymerized magnetic microspheres. Alkyne groups in magnetic PPRAAm microspheres were detected by infrared spectroscopy. Magnetic PPRAAm microspheres were successfully used as the anchor to enable a “click” reaction with an azido‐end‐functionalized model peptide (radiolabeled azidopentanoyl‐GGGRGDSGGGY(¹²⁵I)‐NH₂) and 4‐azidophenylalanine using a Cu(I)‐catalyzed 1,3‐dipolar azide‐alkyne cycloaddition reaction in water. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Studying the synthesis of 4‐tert‐butyl‐1,3‐dihydroimidazol‐2‐ones and their corresponding thiones

4‐tert‐Butyl‐1,3‐dihydroimidazol‐2‐ones and 1,3‐dihydroimidazol‐2‐thiones were synthesized from 1‐amino‐3,3‐dimethylbutanone and subjected to alkylation reactions. The latter compounds were S‐alkyl‐ated with iodoacetamide under alkaline conditions. The N¹ N³‐unsubstituted derivative was iodinated and subsequently alkylated with alkylation reagents which previously have been used for the synthesis of anti‐HTV active imidazoles. Unfortunately, the present products were devoid of activity against HTV.     

Silica/poly (N‐vinylimidazolium) nanospheres by combined RAFT polymerization and thiol‐ene click chemistry

We report a facile method that combined sol–gel reaction, reversible addition–fragmentation chain transfer (RAFT)/macromolecular design via interchange of the xanthates process and thiol‐ene click reaction to prepare monodisperse silica core‐poly(N‐vinylimidazole) (PVim) shell microspheres of 200 nm in average diameters. First, silica with C = C double bonds was prepared by the sol–gel reaction of 3‐(trimethoxysilyl)propyl methacrylates (MPS) with tetraethoxysilane in ethanol; SiO₂@PVim were subsequently prepared by grafting PVim chain (Mn = 9800 g/mol, polydispersity index = 1.22) to MPS‐SiO₂ via the thiol‐ene click chemisty. The obtained SiO₂@PVim microspheres show higher catalytic activity toward the hydrolysis of p‐nitrophenyl acetate compared with the PVim homopolymers. The as‐prepared composites have been characterized by scanning electron microscopy, transmission electron microscopy, thermal gravimetric analysis and Fourier transform infrared spectrometry analysis. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of Functionalized Polynorbornanes Employing 2,5‐Bis(trifluoromethyl)‐1,3,4‐oxadiazole

Cycloaddition reaction of 2,5‐bis(trifluoromethyl)‐1,3,4‐oxadiazole with strained olefinic bonds of norbornenes was used to synthetize functionalized polynorbornanes. This simple, one step procedure was more effective when reaction was carried out by classical heating, in comparison to microwave‐assisted reactions. Various functional groups were stable in the reaction conditions (ester, imide, phthalimide, piperidyl, and carboxylic acid), whereas anhydride, N‐Boc, or TMS functionalities do not withstand reaction conditions.     

以氯代酰氯为试剂的交联聚苯乙烯微球的Friedel-Crafts酰基化反应

采用ω-氯代酰氯试剂氯乙酰氯和氯丁酰氯,在Lewis酸催化剂存在下,于室温下分别与交联聚苯乙烯(CPS)微球进行了Friedel-Crafts酰基化反应,制备了氯代酰基化(chloroacylation,CA)的交联聚苯乙烯微球(CACPS),用红外光谱与佛尔哈德分析法表征了产物的化学结构与组成,研究了各种因素对反应过程的影响。 结果表明,在Friedel-Crafts酰基化反应过程中,伴随的副反应─微球表面聚苯乙烯大分子之间的Friedel-Crafts烷基化附加交联反应,不但降低了在CPS微球表面引入氯代酰基的效率,还使微球变脆。 在室温(25 ℃)下,以CHCl3溶剂、催化剂SnCl4与白球中聚苯乙烯链节的摩尔比为1.2∶1、采用10 mL/g CPS微球的溶剂用量反应5 h,可以达到酰基化反应和烷基化交联副反应的最佳平衡点(此时的氯含量最高)。 结果还表明,采用氯丁酰氯对CPS微球进行氯代酰基化反应的效果明显好于氯乙酰氯。     

One‐pot acid‐free ferrocenylalkylation of azoles with α‐ferrocenyl alcohols: ferrocene‐based plant growth regulators and herbicide safeners

α‐Ferrocenylalkylation of azoles or S‐nucleophiles with FcCH(R)OH (Fc = ferrocenyl) can be accomplished under acid‐free conditions as one‐pot process via an intermediate formation of the α‐ferrocenylalkyl carbonates FcCH(R)OC(O)OEt. The reaction allows the alkylation of acid sensitive substrates like imidazole derivatives or sodium N,N‐diethyldithiocarbamate. The reaction with ambident azoles proceeds as the N‐alkylation. Some α‐ferrocenylalkyl azoles were found to exhibit plant growth stimulating or herbicidal effects on corn seeds or act as the herbicide safeners against sulfonylurea herbicides.     

Novel N‐Alkylbenzimidazole‐Ruthenium (II) complexes: Synthesis and catalytic activity of N‐alkylating reaction under solvent‐free medium

In this article, direct N‐alkylation reactions of amines with alcohols derivatives have been investigated. For this purpose, a new series ruthenium (II) complexes bearing N‐coordinated benzimidazole complexes with have been synthesized and fully characterized by elemental analysis, FT‐IR, ¹H NMR and, ¹³C NMR spectroscopies. Additionally, the structures of the complexes 2b and 2c have been confirmed by X‐ray crystallography. Although the N‐alkylating reaction is usually performed in toluene, the catalytic study of complexes 2a‐d has carried out no additional solvent and alcohol acted both as solvent and reactant of alkylating by using a little excess of alcohols. Surprisingly, conversion and selectivity of amine product for alkylation reaction have been seen high in medium solvent‐free relative to in toluene.     

Highly active polymeric organocatalyst: Chiral ionic polymers prepared from 10,11‐didehydrogenated cinchonidinium salt

Since few examples of 10,11‐didehydrogenated (3‐ethynyl) cinchona alkaloids have been utilized as organocatalysts in asymmetric reaction, we synthesized 10,11‐didehydrogenated cinchonidine. The 3‐vinyl group of cinchonidine was transformed into a 3‐ethynyl functionality. Based on the resulting 10,11‐didehydrogenated cinchonidine, the corresponding quaternary ammonium salt and its dimers were prepared. The ion‐exchange reaction between the quaternary ammonium salt and sodium sulfonate produced the quaternary ammonium sulfonate as a stable ionic compound. Chiral ionic polymers were then synthesized by the ion‐exchange polymerization of the 10,11‐didehydrogenated cinchonidinium salt dimer and a disulfonate. The chiral ionic polymers were found to be capable of efficiently catalyzing the asymmetric alkylation of N‐(diphenylmethylene)glycine tert‐butyl ester. The enantioselectivities obtained with the polymeric catalysts were higher than those obtained with the corresponding monomeric catalyst. Dimers of 10,11‐didehydrogenated cinchonidinium salts were prepared. Treatment of the dimer with disodium disulfonate gave the chiral ionic polymers, which showed high catalytic activity in asymmetric benzylation of N‐(diphenylmethylen)glycine tert‐butyl ester. The polymeric catalysts were reused several times without the loss of catalytic activity. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 621–627