铜–铬–锆合金光谱分析用标准物质的研制

以电解铜和铜–铬、铜–锆中间合金为原材料,通过真空熔炼和热锻加工工艺,研制了铜–铬–锆合金光谱分析用标准物质。将样品分成4组,每组85块后,采用金相检验和光电直读光谱仪进行均匀性、稳定性和定值分析。从样品中随机抽取15块进行均匀性检验,经F检验表明,在95%的置信区间范围内样品均匀性良好;稳定性考察12个月,结果表明在考察期间内样品稳定性良好;标准物质样品经国内3家具有分析资质的实验室进行协作定值,并评定了定值结果的不确定。铜–铬–锆合金标准物质样品中Cr,Zr元素的相对扩展不确定度分别为0.015%~0.036%,0.019%~0.033%(k=2)。该标准物质达到了国家标准物质的技术要求,可用于有关铜–铬–锆合金产品中铬、锆元素的方法校准和质量控制。     

用ETV-ICP-MS研究Cr、Ni、Zr、Nb、Yb在石墨炉中的蒸发/原子化机理

本文以电热蒸发电感耦合等离子体质谱（ETV-ICP-MS）为手段,探讨了Cr、Ni、Zr、Nb和Yb在石墨炉中的蒸发/原子化机理;比较了不同化学改进剂存在条件下,Cr、Ni、Zr、Nb和Yb的蒸发行为和在石墨炉原子吸收（GFAAS）中的原子化行为;考察了石墨炉温度和ICP功率等实验参数对上述元素发射强度及轮廓的影响.结果表明,Pd和Mg化合物的存在对Cr、Ni、Zr、Nb和Yb的蒸发/原子化行为没有明显的化学改进作用;然而,以聚四氟乙烯（PTFE）为化学改进剂时,可显著改善Cr、Ni、Zr、Nb和Yb的蒸发行为,避免难熔碳化物的形成,降低待测物的蒸发温度;对Cr和Ni的GFAAS信号强度略有增强;但是,由于Yb、Nb和Zr氟化物的离解键能很高,难以离解/原子化,PTFE的存在反而降低了Yb、Nb和Zr在GFAAS中的信号强度.     

Cytotoxic Activity of Ammonium Tellurates

The cytotoxic activity of a series of methylammonium tellurates on human fibrosarcoma HT-1080, mouse hepatoma MG-22A, and mouse fibroblasts 3T3 cell lines is described. The role of tellurates as free radical regulators is discussed.     

Lanthanoid and yttrium tellurates

Preparation in aqueous medium of all the lanthanoid (except Ce and Pm) and yttrium tellurates is described. Chemical analyses, solubilities at 25°C in water and thermograms of all the products prepared were determined. X-ray diffractograms and DTA and DTG curves of La, Gd and Yb tellurates were obtained and commented. Partial volatilization of lanthanoid is observed in the thermal analysis of tellurates.     

Polyhedral oligometallasilsesquioxanes as models for silica-supported catalysts

Incompletely-condensed silsesquioxanes offer excellent potential as ligands in homogeneous models for silica-supported catalysts. This paper focuses on the chemistry of Cr and V-containing silsesquioxanes, which are proposed as models for silica-supported chromates and vanadates. It has been shown that the reactivities of these transition-metal-containing silsesquioxanes can be very different than that observed for stoichiometrically similar alkoxide or siloxide complexes. In particular, two new catalysts for the polymerization of olefins have been prepared by reacting structurally well-defined Cr and V-containing Si/O frameworks with trialkylaluminum reagents. Mechanistic studies on the vanadium system implicate high-valent V(V) complexes as the active catalytic species.     

V2.1TiNi0.4Zr0.06Cu0.03M0.10 (M=Cr,Co, Fe,Nb, Ta)储氢合金的微结构及电化学性能

采用磁悬浮感应熔炼方法制备了V2.1TiNi0.4Zr0.06Cu0.03M0.10(M=Cr, Co, Fe, Nb, Ta)储氢电极合金, 通过X射线衍射(XRD)、扫描电子显微镜(SEM)、电子衍射能谱(EDS)分析和电化学测试等手段系统研究了添加元素M对合金微结构与电化学性能的影响. 结果表明, 所有合金均由BCC结构的V基固溶体主相和C14型Laves第二相组成, 且第二相沿主相晶界形成三维网状分布; Cr、Nb 和Ta元素主要分布在合金主相中, 而Co和Fe元素主要分布在第二相中. 电化学性能测试表明, 在V2.1TiNi0.4Zr0.06Cu0.03合金中掺加Cr、Co、Fe、Nb或Ta元素后, 虽然会降低最大放电容量, 但能有效抑制合金中V和Ti的腐蚀溶出, 提高电极充放电循环稳定性; 同时还能明显改善合金的高倍率放电性能. 相比之下, V2.1TiNi0.4Zr0.06Cu0.03Cr0.10合金具有最佳的综合电化学性能.     

过渡金属(Ti,Zr,Mn,Cu,Mo,Cr,Co)离子掺杂的MCM-48的合成、表征与催化性能研究

合成了掺杂Ti、Zr、Mn、Cu、Mo、Cr、和Co过渡金属离子的中介孔分子筛MCM-48.通过TEM、孔分布测试、XRD、电子能谱、红外吸收及热失重分析对掺杂的MCM-48进行结构表征,并研究了其催化性能.结果表明,掺杂Ti、Cr、Zr的MCM-48具有优良的催化性能.     

Synthesis and characterization of Prussian blue analogues incorporating the edge-bridged octahedral [Zr6BCl12]2+ cluster core

In attempts to produce a microporous magnet, two approaches were explored for expanding the Prussian blue structure type via incorporation of edge-bridged octahedral [Zr(6)ZCl(12)](2+) (Z = B, Be) cluster cores. Dissolution of Rb(5)Zr(6)BCl(18) and K(5)Zr(6)BeCl(15) in an acetonitrile solution of Et(4)N(CN) led to the isolation of (Et(4)N)(5)[Zr(6)BCl(12)(CN)(6)] (1) and (Et(4)N)(5)[Zr(6)BeCl(12)(CN)(6)].2MeCN.2THF (2), respectively. The crystal structure of 1.1.5MeCN revealed the expected cyano-terminated cluster complex with a trans-N...N span of 11.73(3) Angstroms. Unfortunately, both [Zr(6)ZCl(12)(CN)(6)](5-) clusters rapidly lose their cyanide ligands in aqueous solution making them ill-suited for solid-forming reactions with hydrated metal ions. Such outer-ligand exchange, however, allows the use of [Zr(6)BCl(18)](4-) in the synthesis of expanded Prussian blue-type solids through reactions with [Cr(CN)(6)](3-). The use of 2.2 M aqueous LiCl to stabilize the cluster during the reaction gave (Et(4)N)(2)[Zr(6)BCl(12)][Cr(CN)(6)]Cl.3H(2)O (3), while the use of 1 M acetic acid yielded (Et(4)N)(2)[Zr(6)BCl(12)][Cr(CN)(6)]Cl.2H(2)O.CH(3)CO(2)H (4). A Rietveld refinement against X-ray powder diffraction data collected for 3 confirmed the presence of a cubic Prussian blue framework structure, featuring alternating [Zr(6)BCl(12)](2+) cores and [Cr(CN)(6)](3-) anions. The temperature dependence of magnetization data obtained for 4 revealed activation of magnetic exchange interactions between the S = (1)/(2) cluster units and the S = (3)/(2) hexacyanochromate complexes below 10 K.     

Synthesis and crystal structure of new alkali metal hydrogen tellurates

New alkali metal hydrogen tellurates have been synthesized, and their structures have been determined by X-ray crystallography. Hydrogen tellurates I–VI contain centrosymmetric binuclear anions [Te₂O₁₀H_4+x ]^(4?x)?, where x=0, 1, 2. Hydrogen tellurates II and VI contain, in addition to the binuclear anion, mononuclear species [TeO₆H₄]^2? and Te(OH)₆, respectively. The CNs of alkali metals vary from 8 to 12. In all structures, the hydrogen atoms (of both the hydroxy groups and water molecules) are involved in hydrogen bonding.     

Ce-Zr-O固溶体的制备和表征

采用硝酸盐直接分解法、共沉淀法、苹果酸溶胶 凝胶法和柠檬酸溶胶 凝胶法制备了Ce Zr O复合氧化物并进行了表征。溶胶 凝胶法制得的Ce Zr O为立方的Ce0 .5Zr0 .5O2 复合氧化物 (其中少量具有立方性质的t″相 ) ,而直接分解和共沉淀法制得的是由立方Ce0 .8Zr0 .2 O2 和四方Ce0 .2 Zr0 .8O2 固溶体组成的复合氧化物。不同制备方法制得的样品由于物相组成不同 ,还原性能也有较大差别。差热分析和X射线衍射分析结果表明 ,凝胶在燃烧的同时生成了Ce0 .5Zr0 .5O2 固溶体。     

超临界相由合成气合成低碳醇的研究

选择有代表性的Ｃｕ－Ｃｏ,Ｚｎ－Ｃｒ和ＺＲ－Ｍｎ体系为催化剂,研究了超临界条件下由合成气 民低碳醇的规律及提高产物中Ｃ２＋ＯＨ含量的可能性。结果表明,三种催化剂上超临界相合成醇反应的ＣＯ转化率都比气相合成醇反应的高。Ｃｕ－Ｃｏ催化剂上超临界相合成反应的醇选择性低于气相合成者,但合成醇的产物与气相合成的相同,且均符合Ｓｃｈｕｌｚ－Ｆｌｏｒｙ分布。Ｚｎ－Ｃｒ和Ｚｒ－Ｍｎ催化剂上的产物分布不符合Ｓｃｈｕ     

Phosphido- und arsenido-verbrückte Zweikernkomplexe: Synthese und Struktur von (η5-C5H4R)2Zr{μ-P(SiMe3)2}2M(CO)4 (R = Me,M = Cr; R = H,M = Mo) sowie die Synthese von (η5-C5H5)2Zr{μ-As(SiMe3)2}2Cr(CO)4

Phosphido- and Arsenido-bridged Dinuclear Complexes. Synthesis and Molecular Structure of (η⁵-C₅H₄R)₂Zr{μ-P(SiMe₃)₂}₂M(CO)₄ (R = Me, M = Cr; R = H, M = Mo) and Synthesis of (η⁵-C₅H₅)₂Zr{μ-As(SiMe₃)₂}₂Cr(CO)₄ The reaction of (η⁵-C₅H₄R)₂Zr{E(SiMe₃)₂}₂ with M(CO)₄(NBD) (NBD = norbornadiene) yields the dinuclear phosphido- or arsenido-bridged complexes (η⁵-C₅H₄R)₂Zr{μ-E(SiMe₃)₂}₂M(CO)₄ (R = Me, E = P, M = Cr ( 1 ); R = H, E = P, M = Mo ( 2 ); R = H, E = As, M = Cr ( 3 )). No formation of dinuclear complexes was observed in the reaction of (η⁵-C₅H₄Me)₂Zr{P(SiMe₃)₂}₂ with Ni(PEt₃)₄, Ni(CO)₂(PPh₃)₂ or with NiCl₂(PPh₃)₂ in the presence of Mg. Complexes 1 – 3 were characterised spectroscopically (i. r., n. m. r., m. s.), and X-ray structure investigations were carried out on 1 and 2 . The central four-membered ZrP₂M ring is slightly puckered (dihedral angle between planes ZrP₂/CrP₂ 14.7°, ZrP₂/MoP₂ 14.2°). The Zr? P bond lengths are equivalent ( 1 : Zr? P1 2.654(4), Zr? P2 2.657(4) Å; 2 : Zr? P1 2.6711(9), Zr? P2 2.6585(7) Å), as are the M? P bond lengths (M = Cr ( 1 ): Cr? P1 2.513(4), Cr? P2 2.502(4) Å; M = Mo ( 2 ): Mo? P1 2.6263(7), Mo? P2 2.6311(10) Å). The long Zr ··· M distances of 3.414 Å (M = Cr ( 1 )) and 3.461 Å (M = Mo ( 2 )) indicate the absence of a metal-metal bond.     

A systematic study of insoluble substances. i

A systematic study of substances, found by the authors to be insoluble, has been undertaken. It was found that the following substances were sufficiently resistant to the standard acid treatment to be considered insoluble: (a) Nitroprussides of N1, Co and Cu. (b) Ferricyanidcs of N1 and Co. (c) Ignited chromites of Mg, Zn, Cd, Mn, Co, Cu, Ni, Be, Ce, U and Zr. (d) Ignited aluminates of Cu. Co, Zn, Mn and N1. (c) Ignited arsenates of Zr, Ti and Cr. (f) Ignited phosphate of Cr and freshly prepared manganic rnetaphosphate. It has been found that in the large majority of cases the insolubility increases with the period of heating.     

Reactions of tellurates(IV) of some 2nd group metals with basic oxides

Calcium, strontium and barium tellurates(IV) were heated, in N₂ atmosphere, with stoichiometric amounts of CaO, SrO and BaO, respectively. The products of reactions, proceeding at 380–620°C, contained orthotellurate and telluride anions formed in disproportionation.     

尖晶石LiMn_2O_4的多元掺杂改性研究

采用高温固相法合成了多元复合掺杂改性的尖晶石型锰酸锆正极材料，用X射 线衍射法对材料进行了表征，表明所得材料均呈现良好的尖晶石的结构，通过充放 电测试，发现其中LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)La_(0.01)O_4和 LiMn_(1.93)Co_(0.02)Cr_(0.02)Al_(0.02)-Zr_(0.01)O_4的循环性能有了很大程 度的改善，循环50次后仍能保持94%和91%的容量。     

A systematicstudy of insoluble substances. II

The antimonates of Be, Mg, Zn, Cd. Cr, Mn, Co, Ni, Cu, Ca, Sr, Ba, Al. 'I'h. Zr and U when heated to 900° were found to become sufficiently resistant to the standard acid treatment to be considered insoluble. The corresponding stannates do not become insoluble on being subjected to this treatment. The corresponding arsenates with the exception of those of Zi, Ti, Cr and Sn also do not become insoluble on being heated.     

Trace characterisation of lithium niobate by neutron activation analysis

Summary Coprecipitation behaviour of As, Au, Co, Cr, Cu, Eu, Fe, Ir, La, Lu, Mn, Mo, Nb, Ni, Pd, Pt, Sb, Sc, Ta, W, Zn and Zr during precipitation of hydrous oxide of niobium from lithium niobate was investigated. The matrix was dissolved in HF-HNO₃, evaporated to dryness and niobium was precipitated from HNO₃-H₂O₂ medium. The recovery studies were made using radiotracers. A radiochemical separation scheme based on group precipitation has been developed for the determination of Au, Co, Cr, Cu, Fe, Mn, Ni, Pd, Pt, Zn, Zr and rare earth elements. The method was applied to the analysis of lithium niobate. This analysis has provided fruitful information for improving the quality of the crystal.     

Oxidation of CO on Zr-, Fe-, Cr-, Ni-, and Cu-containing Catalysts Prepared by Pyrolysis of Metal β-Diketonates on a Synthetic Ceramic Foam

Catalytic systems containing Zr, Fe, Cr, Ni, and Cu composite coatings were suggested for oxidation of CO to CO₂. The coatings were prepared by gas-phase thermolysis of metal acetylacetonates and hexafluoroacetylacetonates on a synthetic ceramic foam. The kinetic and activation parameters of the CO oxidation on these catalysts were determined, and the relative activities of the catalysts were evaluated.     

Solvent extraction of several metal ions with mercaptotropone

Mercaptotropone was synthesized from tropone, and its acid dissociation constant (K_a) and distribution coefficient (K_D) between benze and aqueous solution were spectrophotometrically determined as 5.75 (pK_a) and 2.46 (log K_D); Extraction behaviour of Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cr(III), Fe(III), Y(III), and Zr(IV) with this reagent into benzene was examined. Cu(II) and Fe(III) were completely extracted from acidic solution, Mn(II), Co(II), Ni(II), Zn(II), Pb(II), and Zr(IV) were also extracted from intermediate pH region, a part of Cr(III) was extracted, but Y(III) was not extracted.     

Excretion of biotrace elements using the multitracer technique in mice

A radioactive multitracer solution obtained from the nuclear reaction of selenium with 25 MeV/nucleon⁴⁰Ar ions was applied to the investigation of the trace elements behavior in feces and urine of mouse. The excretion rates of 23 elements, Na, K, Rb, Mg, Ca, Sr, Ga, As, Sc, V, Cr, Mn, Co, Fe, Zn, Y, Zr, Mo, Nb, Tc, Ru, Ag and In were simultaneously detected under strictly identical experimental conditions, in order to clarify the excretion behavior of the elements in mice. Fecal and urinary excretion rates of the elements in mice reached the highest value separately at 48 and 24 hours. The total excretion of Mo, Tc and Co within 96 hours were all larger, more than 60%. Accumulative excretion rates of Ca, Nb, Mg, Sr, V, Sc, Na, Cr, Fe, Ag, Mn and Zr were 60-30%. The total rates of Ru, K, As, Zn, Rb, Y, Ga and In were less than 30%, and low excretion. The main excretion pathway of Mo, Co, Mg, Fe and Ag was through urine, and Na, K, As and Rb were eliminated from the body also in urine. But fecal excretion of Tc, Nb, Sr, Y, Ru, and In were larger than urinary excretion, and Ca, Sc, Mn, Zr, Zn were eliminated from the body in feces.