Coulometric titration in the study of metal ion-ligand equilibria

The coulometric titration technique is applied to evaluation of stability constants of metal complexes with ligands which have protolytic properties. The validity of the procedure was checked by studying several well-known systems. The proposed method can be used with success when metal ions are not reduced at the working cathode. Constants for calcium and magnesium complexes with components of some biologically important buffers, so-called Good buffers, were evaluated under experimental conditions (ionic strength of 0.16M, 37 degrees ) used in clinical analysis.     

Simultaneous determination of mercury, lead and cadmium ions in water using near-infrared spectroscopy with preconcentration by thiol-functionalized magnesium phyllosilicate clay

Analysis of metal ions in environment is of great importance for evaluating the risk of heavy metal to public health and ecological safety. A method for simultaneous determination of metal ions in water samples was developed by using adsorption preconcentration and near-infrared diffuse reflectance spectroscopy (NIRDRS). A high capacity adsorbent of thiol-functionalized magnesium phyllosilicate, named Mg-MTMS, was prepared by co-condensation for preconcentration of Hg²⁺, Pb²⁺ and Cd²⁺ in aqueous solutions. After adsorbing the analytes onto the adsorbent, NIRDRS was measured and PLS models were established for fast and simultaneous quantitative prediction. Because the interaction of the ions with the functional group of the adsorbent can be reflected in the spectra, the models built with the samples prepared by river water were proven to be efficient enough for precise prediction. The determination coefficients (R²) of the validation samples for the three ions were found as high as 0.9197, 0.9599 and 0.9861, respectively. Furthermore, because the high adsorption efficiency of Mg-MTMS, the detected concentrations are as low as milligrams per liter for the three ions, and the concentration can be further reduced. Therefore, the feasibility of quantitative analysis metal ions in river water by NIRDRS is proven and this may provide a new way for fast simultaneous determination of trace metals in environmental waters.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

An approach by using near-infrared diffuse reflectance spectroscopy and resin adsorption for the determination of copper, cobalt and nickel ions in dilute solution

Near-infrared spectroscopy (NIRS) has been proved to be a powerful analytical tool and used in various fields, it is seldom, however, used in the analysis of metal ions in solutions. A method for quantitative determination of metal ions in solution is developed by using resin adsorption and near-infrared diffuse reflectance spectroscopy (NIRDRS). The method makes use of the resin adsorption for gathering the analytes from a dilute solution, and then NIRDRS of the adsorbate is measured. Because both the information of the metal ions and their interaction with the functional group of resin can be reflected in the spectrum, quantitative determination is achieved by using multivariate calibration technique. Taking copper (Cu²⁺), cobalt (Co²⁺) and nickel (Ni²⁺) as the analyzing targets and D401 resin as the adsorbent, partial least squares (PLS) model is built from the NIRDRS of the adsorbates. The results show that the concentrations that can be quantitatively detected are as low as 1.00, 1.98 and 1.00 mg L⁻¹ for Cu²⁺, Co²⁺ and Ni²⁺, respectively, and the coexistent ions do not influence the determination.     

Controlled-potential coulometric determination of platinum in americium—platinum alloys

A controlled-potential coulometric method for the determination of platinum in americium—platinum alloys is described. Platinum in the hexachloroplatinate complex is reduced to the metal at —0.3 V vs. the saturated silver chloride electrode on a mercury pool electrode. For quantities up to 5 mg, the standard deviation was 6.4 μg.     

Coulometric titration with electrogenerated +2 tin: Determination of iodine,bromine, and various oxidants via iodometry

The use of electrolytically generated +2 tin as a coulometric titrant has been studied. In a 3 to 4M sodium bromide and 0.2N hydrochloric acid solution, containing 0.2M stannie chloride, the generation of stannous ion is 100% efficient up to a current density of 80 mA/cm². With this medium iodine and bromine can be titrated coulometrically with errors of about ±0.3% or less. The titration is well suited for the iodometric determination of strong oxidants. Employing stannous ion and bromine for direct and reverse titrations, quinone and hydroquinone have been titrated.     

A new approach to flow-batch titration. A monosegmented flow titrator with coulometric reagent generation and potentiometric or biamperometric detection

Monosegmented flow analysis (MSFA) has been used as a flow-batch system to produce a simple, robust, and mechanized titrator that enables true titrations to be performed without the use of standards. This paper also introduces the use of coulometry with monosegmented titration by proposing a versatile flow cell. Coulometric generation of the titrand is attractive for titrations performed in monosegmented systems, because the reagent can be added without increasing the volume of sample injected. Also, biamperomeric and potentiometric detection of titration end-points can increase the versatility of the monosegmented titrator. The cell integrates coulometric generation of the titrand with detection of end-point by potentiometry or biamperometry. The resulting titrator is a flow-batch system in which the liquid monosegment, constrained by the interfaces of the gaseous carrier stream, plays the role of a sample of known volume to be titrated. The system has been used for determination of ascorbic acid, by coulometric generation of I₂ with biamperometric detection, and for determination of Fe(II), by coulometric generation of Ce(IV) with potentiometric detection of the end-point, both in feed supplements.     

In-Capillary Derivatization and Preconcentration for CE of Metal Ions as Their Phenanthroline Complexes

A simple and automated method involving in-capillary derivatization and in-capillary preconcentration was developed for the simultaneous determination of metal ions by capillary zone electrophoresis. Fe(II), Zn(II), Cu(II) and Cd(II) were derivatized using 1,10-phenanthroline as the derivatizing agent. The in-capillary derivatization and in-capillary preconcentration via large volume injection were performed sequentially as follows: 60 mmol L^?1 1,10-phenanthroline was first hydrodynamically injected (0.2 psi) for 2 s; metal ions were introduced by hydrodynamic injection (0.5 psi) for 60 s; 0.2 mol L^?1 acetate pH 5.5 containing 20 % methanol was used as the running buffer. Four metal ions can be determined within 8 min using 16 kV. The resulting preconcentration factors were in the range 12–21. Good linearity was obtained for concentrations of 0.1–8.0 mg L^?1 (r ² > 0.990). The mean recoveries of the metal ions evaluated by fortification of wine samples were in the range 90–102 %. The limits of detection ranged from 0.05 to 0.2 mg L^?1. The proposed method can be applied for directly determining metal ions in wine samples.     

On-line collection/concentration and determination of transition and rare-earth metals in water samples using Multi-Auto-Pret system coupled with inductively coupled plasma-atomic emission spectrometry

On-line preconcentration and determination of transition and rare-earth metals in water samples was performed using a Multi-Auto-Pret system coupled with inductively coupled plasma-atomic emission spectrometry (ICP-AES). The Multi-Auto-Pret AES system proposed here consists of three Auto-Pret systems with mini-columns that can be used for the preconcentration of trace metals sequentially or simultaneously, and can reduce analysis time to one-third and running cost of argon gas and labor. A newly synthesized chelating resin, ethylenediamine-N,N,N′-triacetate-type chitosan (EDTriA-type chitosan), was employed in the Multi-Auto-Pret system for the collection of trace metals prior to their measurement by ICP-AES. The proposed resin showed very good adsorption ability for transition and rare-earth metal ions without any interference from alkali and alkaline-earth metal ions in an acidic media. For the best result, pH 5 was adopted for the collection of metal ions. Only 5 mL of samples could be used for the determination of transition metals, while 20 mL of samples was necessary for the determination of rare-earth metals. Metal ions adsorbed on the resin were eluted using 1.5 M nitric acid, and were measured by ICP-AES. The proposed method was evaluated by the analysis of SLRS-4 river water reference materials for trace metals. Good agreement with certified and reference values was obtained for most of the metals examined; it indicates that the proposed method using the newly synthesized resin could be favorably used for the determination of transition and rare-earth metals in water samples by ICP-AES.     

Structure and behavior of organic analytical reagents : Chelates of 2-(o-hydroxyphenyl)-benzoxazole, 2-(o-hydroxyphenyl)-benzothiazole and 2-(o-hydroxyphenyl)-benzothiazoline.

The reactions of the chelating reagents named in the title, with a number of metal ions, have been studied in order to evaluate the behavior of reagents containing reactive groupings analogous to those of 8-hydroxyquinoline, but so arranged as to form six-membered ring chelates with metal ions. All three reagents have been found to give less stable chelates than 8-hydroxyquinoline, indicating that for this type of reagent, six-membered ring chelates are less stable than five. 2-(o-Hydroxy-phenyl)-benzoxazole and 2-(o-hydroxyphenyl)-benzothiazole have been found to be potentially useful as organic precipitating agents for metal ions, being more selective than 8-hydroxyquinoline, which they somewhat resemble in behavior. In contrast to the oxazole and thiazole, 2-(o-hydroxyphenyl)-benzothiazoline was found to react with most of the metal ions tried. Because of the solubility of its chelates in organic solvents, 2-(o-hydroxyphenyl)-benzothiazoline may be a useful solvent extraction agent for metal ions.     

Application of the spectral correction method and "neural networks" for simultaneous determination of V(V) and Al(III)

Simultaneous determination of V(V) and Al(III) was performed by application of neural networks when the calibration matrix was performed using β-correction spectra. Two reactions between V(V) and Al(III) and Alizarin Red S (ARS) as a ligand have been investigated and applied for the simultaneous spectrophotometric determination of these metal ions. The parameters controlling behavior of the system were investigated and optimum conditions selected. Feed-forward neural networks have been trained to quantify considered metal ions in mixtures under optimum conditions. Sigmoidal functions were used in the hidden and output layers. Determinations were made over the concentration range 0.10-7.80 μg ml⁻¹ of V(V) and 0.11-4.20 μg ml⁻¹ of Al(III). Applying this method satisfactorily to simultaneous determination of these metal ions in several synthetic solutions with total relative standard error less than 4.02% validated the proposed method.     

The determination of phenol and kinetic studies on the monobromination of phenol by a pulse coulometric technique

A method for the coulometric determination of phenol is described in which constant current pulses are used to electrogenerate bromine and a current recorder is used to follow the bromination reaction of phenol. Solutions containing 10^-4 to 7.10^-6M phenol are determined with a precision of 1 %. A general method for determining the kinetics of bromination reactions is postulated and used for the determination of the rate constant of the monobromination of phenol. The rate constant for the reaction in which the reacting species are the neutral phenol molecule and the bromine molecule, was found to be 1.6.10⁵1/mole sec.     

Some analytical applications of aromatic sulfonyl haloamines: Determination of thiocyanate and cyanide ions in metal complexes and salts with bromamine-B and dichloramine-B

Simple, rapid, and reproducible methods for the determination of thiocyanate and cyanide ions in metal salts and complexes with bromamine-B (BAB) and dichloramine-B (DCB) have been developed. The oxidation involves eight and two electron changes, respectively, with NCS^? and CN^? ions in 0.05–0.20 N NaOH medium in the case of BAB and in partially aqueous medium with DCB. The proposed methods could be employed for computing the number of thiocyanate and cyanide ligands present in the respective metal complexes.     

Investigation of alkali metal and ammonium tetraphenylborates by infrared spectrophotometry

The infrared spectra of alkali metal and ammonium tetraphenylborates have been studied and an infrared spectrophotometric method developed for the determination of ammonium ions in the form of the tetraphenylborate. The N-H deformation vibration band appearing at 1405 cm⁻¹ in the spectrum of ammonium tetraphenylborate has been utilized for quantitative evaluation; the tetraphenyl-borates of the alkali metals do not exhibit absorption at this frequency. Thus ammonium ions can be determined as the tetraphenylborate in the presence of alkali metal ions without preliminary separation.     

Lower rim substituted p-tert-butyl-calix[4]arene. Part 16. Synthesis of 25,26,27,28-tetrakis(piperidinylthiocarbonylmethylene)-p-tert-butylcalix[4]arene and its interaction with metal ions

The synthesis, characterisation and X-ray crystal structures of p-tert-butyl-calix[4]arene-thioamide L and its complex with lead L-Pb²⁺ is reported. The cation-binding properties in solution have been assessed by liquid-liquid extraction of the metal picrates from water into dichloromethane and by stability constants determination in acetonitrile using UV-absorption spectrophotometry or potentiometry. The compound was used as active material in Pb-ion-selective membrane electrodes. The characteristics of these electrodes as well as the selectivity coefficients for Pb²⁺ cation versus many metal ions tested were obtained. Complex formation constants within the electrode membranes were determined using the sandwich membrane method and were compared to those obtained in acetonitrile. The lead concentration in the scrap-lead was determined with the use of electrodes incorporating the ligand studied.     

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Silica gel-bound amines phase modified with p-dimethylaminobenzaldehyde (p-DMABD) was prepared based on chemical immobilization technique. The product (SG-p-DMABD) was used as an adsorbent for the solid-phase extraction (SPE) Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The uptake behaviors of SG-p-DMABD for extracting these metal ions were studied using batch and column procedures. For the batch method, the optimum pH range for Cr(III) and Ni(II) extraction was ≥ 3, for Cu(II), Pb(II) and Zn(II) extraction it was ≥ 4. For simultaneous enrichment and determination of all the metals on the newly designed adsorbent, the pH value if 4.0 was selected. All the metal ions can be desorbed with 2.0 mL of 0.5 mol L^− 1 of HCl. The results indicate that SG-p-DMABD has rapid adsorption kinetics using the batch method. The adsorption capacity for these metal ions is in the range of 0.40-1.15 mmol g^− 1, with a high enrichment factor of 125. The presence of commonly coexisting ions does not affect the sorption capacities. The detection limits of the method were found to be 1.10, 0.69, 0.99, 1.10 and 6.50 μg L^− 1 for Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 5.0% (n = 8) for all metal ions. The method was applied to the preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from the certified reference material (GBW 08301, river sediment) and water samples with satisfactory results.     

Coulometric determination of uranium with a platinum working electrode

Experimental conditions have been established which enable uranium to be determined coulometrically by the reduction of uranium(VI) to uranium(IV) at a platinum working electrode, by controlled-potential or controlled-potential-limit techniques. The procedure has been used successfully as a subsidiary method in the routine determination of uranium in pure uranyl nitrate solutions. The platinum electrode has several important practical advantages over the well established mercury-pool electrode for the coulometric determination of uranium. The consecutive determination of iron(III) and uranium(VI), or plutonium(IV) and uranium(VI) can be carried out with the same working electrode in the same solution and the coulometric oxidation of uranium(IV) to uranium(VT) is practicable. The rate of stirring of the cell liquor is much less critical in the case of the platinum electrode. Two main problems had to be overcome before a practical procedure could be achieved; hydrogen evolution during the uranium(VI)-(IV) reduction had to be eliminated so that 100% current efficiency could be obtained for the desired reaction and electrode-surface poisoning phenomena had to be controlled so that reaction times could be kept reasonably short. It was found that selection of a hydrochloric acid base solution containing a small amount of bismuth(III) enabled hydrogen evolution to be avoided: also electrode-surface poisoning with this base solution was not particularly serious and could be maintained at a satisfactorily low level by occasionally anodizing the electrode in dilute sulphuric acid. Bismuth(III) forms a complex with chloride ions and its presence increases the hydrogen overvoltage at the working electrode: no visible deposit of bismuth metal forms on the electrode during the uranium reduction. Samples containing nitrate can be analysed provided sulphamic acid is added to this hydrochoric acid base solution.     

Coulometric titration of salts of strong mineral acids in acetic anhydride by application of a hydrogen/palladium electrode

The application of H₂/Pd electrodes as generator and indicator electrodes is described for coulometric titrations of alkali metal halides and trivalent metal sulphates in acetic anhydride with potentiometric end-point detection. In acetic anhydride, sodium fluoride is a strong enough base to be titrated directly with H⁺ ions obtained by anodic oxidation of hydrogen dissolved in palladium. Other halides (NaCl, KCl, LiCl, KBr and NaBr) can be determined, after reaction of halides with mercury (II) acetate, by coulometric titration of the liberated base. Potentiometric end-point detection with a H₂/Pd-mercury(I) acetate electrode pair is satisfactory. Sulphates of Fe(III), Cr(III) and Al(III) are determined by back-titrating the excess of barium acetate after precipitation of barium sulphate. The errors in these determinations are < 1% for concentrations ranging from 0.001 to 0.003 M.     

Simultaneous determination of iron(III) and vanadium(V) with N-phenylcinnamohydroxamic acid and thiocyanate by extraction-spectrophotometry

N-Phenylcinnarnohydroxamic acid (PCHA) reacts with iron(III) and vanadium(V) in the presence of thiocyanate to form water-insoluble orange and green complexes, respectively. The iron(III)-PCHA and vanadium(V)-PCHA-thiocyanate complexes can be quantitatively extracted into toluene and other common organic solvents at pH 1.5–2.0. The absorption spectra and composition of both complexes are described. The effects of foreign ions and of experimental variables on the extraction and determination of the two metal ions are studied. A simple, selective method is described for the simultaneous determination of iron(III) and vanadium(V) by extraction-spectrophotometry; absorbances are measured at 440 and 580 nm. Mixtures can be determined over the range 10^?4–10^?5 M in each metal. The method was applied successfully to the analysis of standard steels for iron and vanadium.