Synthesis and Characterization of Zirconia Nanocrystallites by Cationic Surfactant and Anionic Surfactant

1 INTRODUCTION Zirconia is a kind of metallic oxide with high mel- ting point. It is highly corrosion-resistant for acid fu- sant and neutral fusant, thus it can be used as refrac- tory material, and it can also be utilized as acid acy- loxy bi-functional catalystic material owing to hav- ing both acid and alkali surface centers[1]. Moreover, zirconia has superior ion-exchange capacity as well as chemical and mechanical stability, therefore, it can also be applied as a catalyst carrier. …     

Ag2CO3-catalyzed cycloaddition of organic azides onto terminal alkynes: A green and sustainable protocol accelerated by aqueous micelles of CPyCl

Using catalytic amount of Ag₂CO₃ a simple, efficient and copper free green protocol has been developed to synthesize 1,4-disubstituted 1,2,3-triazoles regioselectively. Here, the cationic surfactant, cetylpyridinium chloride (CPyCl) in water provides a micellar media and accelerates the subsequent Ag(I)-catalysed azide-alkyne cycloaddition (AgAAC) reaction by increasing the concentration of reactants in the micellar pseudophase. Our method is found to be environmentally friendly from E-factor measurement. The surfactant, CPyCl is found to be nontoxic.     

Examination of the pseudophase model of monomer-micelle interconversion in cetylpyridinium chloride

The 35Cl- NMR chemical shift and line width and the 1H chemical shifts of cetylpyridinium chloride, CPyCl, change abruptly at the critical micelle concentration, indicating conversion of monomeric surfactant into micelles within a very small range of concentration. The simple pseudophase treatment fits these results up to 0.05 M CPyCl, but there then appears to be a modest change in micellar structure. Premicelles of single chain surfactants, detected kinetically or photochemically, are probably formed by interactions between reactant(s) and surfactant.     

Gemini表面活性剂(12-6-12)和DNA的相互作用

应用紫外光谱、荧光探针、zeta 电位、动态光散射和凝胶电泳等方法探讨了阳离子gemini 表面活性剂C₁₂H₂₅N⁺(CH₃)₂―(CH₂)₆―(CH₃)₂N⁺C₁₂H₂₅·2Br^-(12-6-12)与DNA之间的相互作用. 研究结果表明, 与传统表面活性剂相比, 偶联表面活性剂特殊的分子结构使其与DNA的作用更强烈. DNA引导表面活性剂在其链周围形成类胶束结构, 开始形成类胶束时对应的表面活性剂临界聚集浓度(CAC)比纯表面活性剂临界胶束浓度(CMC)低两个数量级. CAC与DNA的浓度无关, 而与表面活性剂之间的疏水作用以及表面活性剂与DNA之间的静电吸引作用密切相关. Zeta 电位和凝胶电泳结果显示了DNA链所带负电荷逐渐被阳离子表面活性剂中和的过程. 借助原子力显微镜(AFM)成功观察到了松散的线团状DNA, 球状体随机地分散在DNA链上形成类似于串珠的结构、尺寸较大的球形复合物以及其由于吸附多余的表面活性剂重新带正电而被溶解得到的较小DNA/12-6-12聚集体. 圆二色(CD)光谱结果显示, 12-6-12可以诱导DNA的构象发生改变.     

Effect of Surfactant Addition on the Structure of Silver Aggregates Produced by Galvanic Cell Reaction and Fabrication of Superhydrophobic Surfaces

The effect of cationic or anionic surfactant on the structure of the silver particles produced by galvanic cell reaction is studied. In the absence of any surfactant, both spherical and spindle-like Ag particles are produced, which exhibit binary structures with both micro- and nanoscale characteristics. Addition of cationic surfactant cetyltrimethylammonium bromide (CTAB) in the reaction solution results in the formation of spherical Ag particles with much smaller sizes. While anionic surfactant sodium dodecyl sulfate (SDS) results in the spindle-like Ag particles. Moreover, the rough Ag surfaces can be easily fabricated by direct deposition of the Ag aggregates onto the silicon surface from solution. After further chemisorption of a self-assembled monolayer of n-dodecanethiol, the Ag aggregates exhibit superhydrophobic properties.     

Phase polymorphism by mixing of poly(oxyethylene)-poly(dimethylsiloxane) copolymer and nonionic surfactant in water

The phase behavior of the water/poly(oxyethylene)-poly(dimethylsiloxane) copolymer (Si25C3EO51.6)/pentaoxyethylene dodecyl ether (C12EO5) ternary system has been studied. Both the silicone copolymer and the surfactant have equal volumes of hydrophilic and lipophilic parts; i.e., these are balanced amphiphiles. Although only a lamellar phase is observed in water-Si25C3EO51.6 and water-C12EO5 binary systems, a variety of liquid crystalline phases, including normal micellar cubic (I1), hexagonal (H1), bicontinuous cubic (V1), lamellar (L(alpha)), reverse bicontinuous cubic (V2), and reverse hexagonal (H2), are observed in the copolymer-rich region of the ternary phase diagram. The small C12EO5 molecules dissolve at the hydrophobic interface in the thick bilayer of the Si25C3EO51.6 L(alpha) phase occupying a large area of the total interface of the aggregates and modulate the curvature of the aggregates. Hence a variety of self-assembled structures are observed. In contrast, Si25C3EO51.6 is not dissolved in the thin bilayer of the C12EO5 lamellar phase (L'(alpha)). Hence, the C12EO5 L'(alpha) phase coexists with copolymer-rich L(alpha) and H2 phases. Consequently, small surfactant molecules are dissolved in a large silicone copolymer aggregate to induce a change in layer curvature, but a large copolymer molecule is hard to incorporate with surfactant aggregates.     

Structure of mesh phases in a cationic surfactant system with strongly bound counterions

We report the observation of an intermediate mesh phase with rhombohedral symmetry, corresponding to the space group Rm, in a mixed surfactant system formed by the cationic surfactant cetyltrimethylammonium bromide (CTAB) and the organic salt 3-sodium-2-hydroxy naphthoate (SHN). It occurs between a random mesh phase (L(alpha)(D)) and a lamellar phase (L(alpha)) at low temperatures; at higher temperatures, the (L(alpha)(D)) phase transforms continuously into the (L(alpha)) phase with an increasing surfactant concentration (phi(s)). To separate the effects of salt and phi(s) on the phase behavior, the ternary system consisting of cetyltrimethylammonium 3-hydroxy-naphthalene-2-carboxylate (CTAHN), sodium bromide (NaBr), and water was studied. The intermediate mesh phase is found in this system at high NaBr concentrations. The micellar aggregates, both in the intermediate and random mesh phases, are found to be made up of a two-dimensional network of rod-like segments, with three rods meeting at each node. The average mesh size increases with phi(s), and the transition from the random mesh phase to the intermediate phase is found to occur when it is approximately 1.5 times the lamellar periodicity. The intermediate mesh phase is absent in the equimolar dodecyltrimethylammonium bromide (DTAB)-SHN system, indicating the role of the surfactant chain length in the formation of this phase. This system exhibits a random mesh phase over a very wide range of water content, with the average mesh size decreasing upon an increasing phi(s), contrary to the trend seen in the CTAB-SHN system.     

1H NMR Study on Solubilization of Aromatic Solutes in Gemini Cationic Surfactant Micelles

The ¹HNMR spectra of gemini cationic surfactant 1,3‐Propane diaminium N, N‐didodecyl‐2‐hydrxyl‐N,N,N′N′‐tetramethyl‐dichloride (ClC₁₂H₂₅‐(CH₃)₂N‐CH₂CH(OH) CH₂N(CH₃)₂ C₁₂H₂₅ Cl), abbreviated to GC₁₂NCl solutions were determined in the presence of toluene, phenyl ethane, benzyl alcohol, or 2‐phenylethanol. Based on observations, probable solubilization sites of the substrate molecule within the micelles are discussed. The examined results indicate that the polarity of aromatic solutes affects their solubilization site in the micelle solution. The methylene in long chain of GC₁₂NCl shows a single signal in the presence of toluene and phenyl ethane, however, when benzyl alcohol or 2‐phenylethanol is in existence, the peak of ethylenes in long chain Gemini surfactant splits into an upfield signal and a downfield signal in the solubilization system with enhancement of molar ratio of aromatic solutes to the sufactant. The addition of benzyl alcohol and 2‐phenylethanol causes a downfield shift of the methyl signal, the other signal were up field shifted by the addition of the phenyl derivatives. From the dependence of chemical shifts of GC₁₂NCl on solubilizate concentration, it is ascertained that at low solubilizate contents the aromatic solutes are solubilized by adsorption at the micelle‐water interface. With further addition of aromatic solutes, the solubilization site of the solubilizate varied gradually from the mantle of the surfactant micelle to its inner core.     

阴/阳离子表面活性剂复配体系的中相微乳液研究

阴离子表面活性剂双-2-乙基己基磺化琥珀酸钠(简称AOT), 和阳离子表面活性剂十六烷基三甲基溴代铵(简称CTAB), 在有醇、正辛烷、盐水存在的情况下,能形成多相微乳液。本文系统地研究了阴/阳离子表面活性剂配比、醇的种类、醇的浓度对该体系的中相微乳液的形成及特性的影响, 得到了中相微乳液的特性参数(最佳含盐量S^*, 最佳中相微乳液体积V^*, 界面张力r~E、盐宽△S等)。这些性质对与阴/阳离子表面活性剂复配体系, 三次采油及日用化工上的应用开发具有重要意义。最后还开展单独阴离子表面活性剂体系和阴/阳离子表面活性剂复配体系进行了比较, 得到一些有价值规律, 并从理论上进行了探讨。     

DNA‐Surfactant Interactions. Compaction,Condensation, Decompaction and Phase Separation

Recent investigations of the interaction between DNA and alkyltrimethylammonium bromides of various chain lengths are reviewed. Several techniques have been used such as phase map determinations, fluorescence microscopy, and electron microscopy. Dissociation of the DNA‐surfactant complexes, by the addition of anionic surfactant, has received special attention. Precipitation maps for DNA‐cationic surfactant systems were evaluated by turbidimetry for different salt concentrations, temperatures and surfactant chain lengths. Single‐stranded DNA molecules precipitate at lower surfactant concentrations than double‐helix ones. It was also observed that these systems precipitate for very low concentrations of both DNA and surfactant, and that the extension of the two‐phase region increases for longer chain surfactants; these observations correlate well with fluorescence microscopy results, monitoring the system at a single molecule level. Dissociation of the DNA‐cationic surfactant complexes and a concomitant release of DNA was achieved by addition of anionic surfactants. The unfolding of DNA molecules, previously compacted with cationic surfactant, was shown to be strongly dependent on the anionic surfactant chain length; lower amounts of a longer chain surfactant were needed to release DNA into solution. On the other hand, no dependence on the hydrophobicity of the compacting agent was observed. The structures of the aggregates formed by the two surfactants, after the interaction with DNA, were imaged by cryogenic transmission electron microscopy. It is possible to predict the structure of the aggregates formed by the surfactants, like vesicles, from the phase behaviour of the mixed surfactant systems. The compaction of a medium size polyanion with shorter polycations was furthermore studied by means of Monte Carlo simulations. The polyanion chain suffers a sudden collapse as a function of the condensing agent concentration and of the number of charges on the molecules. Further increase of the concentration gives an increase of the degree of compaction. The compaction was found to be associated with the polycations promoting bridging between different sites of the polyanion. When the total charge of the polycations was lower than that of the polyanion, a significant translational motion of the compacting agent along the polyanion was observed, producing only a small‐degree of intrachain segregation. However, complete charge neutralization was not a prerequisite to achieve compacted forms.     

Aqueous Two‐Phase System (ATPS) Containing Gemini (12‐3‐12,2Br−) and SDS I: Phase Diagram and Properties of ATPS

Two phases coexist in an aqueous system that contains the two surfactants cationic gemini 12‐3‐12,2Br? and anionic SDS. An aqueous two‐phase system (ATPS) is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic‐anionic surfactant systems. In that region, the molar ratio of gemini to SDS varies with the total concentration of surfactants. ATPS not only has higher stability but also has longer phase separation time for the new systems than that of the traditional system. Furthermore, the optical properties of ATPS are different at different total concentrations. All of these experimental observations can be attributed to the unique properties of gemini surfactant and the synergy between the cationic gemini surfactant and the anionic surfactant SDS.     

Voltammetric behavior of cefdinir in solubilized system

The voltammetric behavior of cefdinir has been studied in different surfactant media viz. anionic, neutral, and cationic surfactants over the pH range 2.5-12 in phosphate buffer (0.2 M). Addition of cationic surfactant (citrimide) to the cefdinir containing electrolyte enhanced the reduction current signal while anionic surfactant (sodium lauryl) and neutral surfactant (Tween-20) showed an opposite effect. The reduction process was irreversible over the entire pH range studied (2.5-12). The mechanism of reduction has been postulated on the basis of controlled potential electrolysis, coulometry and spectral analysis. An analytical method with adequate precision and accuracy was developed for the determination of cefdinir in linear concentration range 2x10(-4)-1x10(-5) mol L(-1) with detection limit 0.3x10(-6) mol L(-1). The analysis of cefdinir in its pharmaceutical formulation resulted in mean recoveries of 99 and 98% for both the reduction peaks.     

Micellar behavior of tetradecyldimethylbenzylammonium chloride in water-alcohol mixtures

The effect of butanol and benzyl alcohol on the critical micelle concentration and the degree of ionization of micelles of tetradecyldimethylbenzylammonium chloride has been studied conductometrically in the temperature range of 5 to 40 degrees C at 5 degrees C intervals. The results indicate that some self-association process of benzyl alcohol in the aqueous phase commences when its concentration amounts to ca 0.05 m. By applying the theoretical treatment suggested by Motomura for binary surfactant systems, the molar fraction of alcohol in the micelle and the standard free energy of solubilization were estimated from the dependence of cmc on temperature and alcohol concentration. For comparative purposes the micellar properties of tetradecyltrimethylammonium bromide in water-alcohol systems at 25 degrees C have also been studied.     

SDS/CTAB/H2O的双水相性质及萃取作用

正负离子表面活性混合物;牛血清蛋白质;色氨酸;SDS/CTAB/H2O的双水相性质及萃取作用     

Oxidation of thioanisole by peroxomolybdate in assemblies of cetylpyridinium chloride and methyltri-n-octylammonium chloride

Methyltri-n-octylammonium chloride (Aliquat 336) is sparingly soluble in water but is readily soluble with a 2-fold excess of micellized cetylpyridinium chloride (CPyCl), and the mixtures show breaks in plots of surface tension or electrolytic conductance against concentration indicative of a critical micelle concentration slightly lower than that of CPyCl. Micellization markedly increases 35Cl and 14N NMR line widths of CPyCl, but addition of NaCl reduces the 35Cl line width and addition of Aliquat increases it. Mixing Aliquat and CPyCl has little effect on their 14N line widths. Ion pairing in alcohol mixtures also increases 35Cl line widths. In water these mixed assemblies behave similarly to micelles of CPyCl as regards effects on rates and equilibria of interconversion of tri- and tetraperoxomolybdate ions, and oxidation of thioanisole by the latter, although it is slightly slower than in micelles of CPyCl. Despite differences in the hydrophobic regions, and relationships between amphiphilic structures and morphologies of association colloids, assemblies of CPyCl and Aliquat behave very much like CPyCl micelles in their physical properties and effects upon reactivity. Geometrical optimization indicates that Aliquat can adopt conformations that allow intercalation with CPyCl micelles.     

Effect of Cationic Surfactant on the Gelation of HPAM by Cr(III)

Aqueous gels formed by the crosslinkage of Cr(III) with partially hydrolyzed polyacrylamide (HPAM), have been commonly applied in the field of petroleum production1. Polymer and surfactants are used in enhancement of oil recovery2. Some studies3 indicate that a strong interaction is existent between polyeletrolytes and oppositely charged surfactants. So it is very important to study the effect of cationic surfactants on the gelation process of crosslinkage of Cr(III) with HPAM. To o…     

正负离子表面活性剂/离子液体双水相性质研究

本文把短链离子液体(IL)四氟硼酸1-乙基-3-甲基咪唑鎓[C2mim]BF4引入正负离子表面活性剂十二烷基硫酸钠(SDS)和十二烷基三甲基溴化铵(DTAB)双水相体系(SDS/DTAB/H2O)中,研究了IL对双水相相图及相分离体系性质的影响。结果表明,[C2mim]BF4的阳离子性质是影响阴离子表面活性剂过量区域性质的主要因素,IL通过静电作用、氢键作用等改变体系中聚集体的形貌,最终导致阴离子双水相(ATPSa)的消失。IL的阴离子对阳离子双水相(ATPSc)区域性质起着决定作用;IL的盐效应引起的对表面活性剂混合胶束扩散双电层的压缩作用,不但促进胶团的形成,缩短了形成稳定胶团所需要的时间,加快了双水相的相分离速度,而且也造成了形成ATPSc所需DTAB含量的提高。IL的引入改变了ATPSc上、下相表面活性剂的组成及含量,使富含表面活性剂的上相中阳离子表面活性剂含量更高,进而提高了双水相的萃取性能,其上相对甲基橙的萃取效率可高达96.67%。     

N-nitrosoamide-mediated N --> O nitroso transfer to alcohols with subsequent denitroxylation

Decomposition of certain N-benzyl-N-nitrosoamides is often accompanied by small amounts of benzaldehyde whose formation was postulated to arise from in situ formation and oxidation of benzyl alcohol. Incubation of excess benzyl alcohol with thermostable N-benzyl-N-nitrosoamides at ambient temperatures in inert solvents generates benzyl nitrite, N-benzyl amides, and benzaldehyde as the major products. Benzyl nitrite formation appears to be linked to N --> O nitroso transfer between the N-benzyl-N-nitrosoamides and benzyl alcohol, which is subject to the previously observed electronic and steric features of the acyl substituent although the former appears to play a much larger role than the latter. Benzaldehyde formation evidently arises from dehydronitrosation (denitroxylation) of the nitrite via O-N bond homolysis and H-abstraction from the resultant benzyloxy radical. Although trans-nitrosation occurs with methanol, 1 degree, 2 degree, and 3 degree alcohols, the reaction is evidently subject to steric effects at both the alpha and beta carbons of the alcohol. Additionally, carbonyl formation only occurs with 2 degrees alcohols and those that can derive resonance-stabilized carbonyls.     

流变学法研究表面活性剂与HPAM的相互作用

流变学法研究表面活性剂与HPAM的相互作用;聚合物;表面活性剂;相互作用;流变学方法     

Spectrophotometric determination of cationic surfactants by formation of ternary complexes with Fe(III) and chrome azurol

An extraction-free spectrophotometric method for the determination of cationic surfactants, such as cetylpyridinium chloride, cetyltrimethylammonium bromide and zephiramine is proposed, which is based on the formation of ternary complexes with Fe(III) and chrome azurol S. The molar ratio of the complex is 2:1:1 (Fe(III):chrome azurol S: cationic surfactant). The method is simple, rapid and sensitive, giving an apparent molar absorptivity of 4.5×10⁴ L·mol^?1-cm^?1 and a linear range of 0.1–6.0 μmol/L cationic surfactants. The total cationic surfactant content can be determined directly in aqueous solutions by measuring the absorbance at 680 nm (pH 5.8). The method has been successfully applied to water samples.