Synthesis and characterization of hydrogen-bonded assemblies of W6S8L6 clusters

Ligand-exchange reactions involving octahedral W6S8 clusters and a family of pyridine-based ligands (isonicotinic acid, isonicotinamide, 4-hydroxypyridine, 4-aminopyridine, 4-pyridineacetamide) have been explored with the goal of preparing compounds that crystallize in hydrogen-bonded arrays. Two new compounds, W6S8(4-pyridineacetamide)6.DMF.4-pyridineacetamide (1) and W6S8(4-aminopyridine)6.4DMF (2), were isolated and characterized by single-crystal X-ray diffraction. Both compounds crystallize in the P2(1)/c space group with a = 16.461(1), b = 33.08(2), c = 13.165(10) A, beta = 103.270(15) degrees for 1 and a = 13.8988(5), b = 13.2791(5), c = 15.6293(6) A, beta = 108.5410(10) degrees for 2. Each compound was further characterized by 1H NMR spectroscopy, elemental (CHN) analysis, and thermogravimetric analysis. Examination of the structures shows that 1 forms a three-dimensional hydrogen-bonded network in which each 4-pyridineacetamide ligand interacts with ligands on neighboring clusters or with the free ligand of crystallization. This is the first hydrogen-bonded network formed from W6S8 clusters. In 2, the amino groups act as hydrogen-bond donors toward DMF molecules of crystallization, but an extended array is not formed. In addition, the binding strengths of these pyridine-based ligands to the W6S8 cluster were studied through quantitative 1H NMR studies of ligand-exchange reactions. A qualitative relationship was found between ligand binding strengths and Hammett substituent constants for this group of ligands.     

Synthesis, characterization, and ligand exchange studies of W(6)S(8)L(6) cluster compounds

Eleven organic Lewis bases were investigated as potential ligands (L) on W(6)S(8)L'(6) clusters by exploring ligand exchange reactions to form W(6)S(8)L(6) clusters. Six new homoleptic W(6)S(8)L(6) cluster complexes were prepared and characterized with L = tri-n-butylphosphine (P(n)Bu(3)), triphenylphosphine (PPh(3)), tert-butylisocyanide ((t)BuNC), morpholine, methylamine (MeNH(2)), and tert-butylamine ((t)BuNH(2)). While partial replacement of ligands occurred with diethylamine (Et(2)NH) and dibutylamine (Bu(2)NH), homoleptic clusters could not be prepared by these exchange reactions. When aniline, tribenzylamine, and tri-tert-butylphosphine were the potential ligands, no exchange was observed. From ligand exchange studies of these ligands and others previously studied, a thermodynamic series of binding free energies for ligands on W(6)S(8)L(6) clusters was established as the following: non-Lewis base solvents, aniline, P(t)()Bu(3), etc. < Et(2)NH, Bu(2)NH < (t)BuNH(2) < morpholine, piperidine < or = (n)BuNH(2), MeNH(2) < or = 4-tert-butylpyridine, pyridine < (t)BuNC < tricyclohexylphosphine (PCy(3)) < PPh(3), P(n)Bu(3) < or = triethylphosphine (PEt(3)). Structures of the new cluster complexes were determined by X-ray crystallography. The new compounds were also characterized by NMR spectroscopy and thermogravimetric analyses (TGA). The W-L bond orders and TGA data qualitatively agree with the thermodynamic series above.     

Ligand substitution reactions of W6S8L6 with tricyclohexylphosphine (L = 4-tert-butylpyridine or n-butylamine): 31P NMR and structural studies of W6S8(PCy3)n(4-tert-butylpyridine)6-n (0 < n < or = 6) complexes

The substitution reactions by bulky tricyclohexylphosphine (PCy3) ligands on W6S8L6 (L = 4-tert-butylpyridine or n-butylamine) clusters were investigated to prepare clusters with mixed axial ligands for low-dimensional cluster linking. When 4-6 equiv of PCy3 are used to react with W6S8(4-tert-butylpyridine)6 (4) in THF, cis-W6S8(PCy3)4(4-tert-butylpyridine)2 (1) is preferentially formed. But when starting with W6S8(n-butylamine)6 (2), only W6S8(PCy3)6 (3) is produced with 6 equiv of PCy3. Other conditions with fewer equivalents of PCy3 led to mixtures of partially substituted complexes in the W6S8L6-n(PCy3)n (0 < or = n < or = 6, L = 4-tert-butylpyridine or n-butylamine) series. A significantly distorted structure for 1 helps to explain its preferential formation. 1H NMR spectra were collected for clusters 1 and 2 and 31P NMR spectra for 1 and W6S8(4-tert-butylpyridine)6-n(PCy3)n complexes. P-P coupling through P-W-W-P is reported for the first time in octahedral metal clusters and shown to be very useful in identifying nearly all the W6S8L6-n(PR3)n complexes and their stereoisomers in the mixtures even before individual species are isolated.     

Synthesis, characterization, and substitution chemistry of [Bu4N]2[W6Cl8(OSO2CF3)6]. A versatile precursor for axially substituted clusters containing the (W6Cl8)4+ core

The new cluster [Bu4N]2[W6Cl8(OSO2CF3)6] (1) has been prepared and structurally characterized. This material is an effective precursor for the generation of cluster ions with the general formula [W6C18L6]n (L = Cl-, Br-, I-, NCS-, NCO-, NCSe-, and O=PPh3; n = 2- or 4+). The last three clusters are new. The products have been characterized by IR spectroscopy, NMR spectroscopy, and FAB mass spectrometry. In addition to 1, the products [Bu4N]2[W6C18(NCS)6] (5) and [Bu4N]2[W6C18(NCO)6] (7) were structurally characterized. Crystal data for 1: space group, P2(1/c) (No. 14); a = 11.116(5) A; b = 27.952(1) A; c = 24.516(1) A; beta = 95.182(9) degrees; V = 7586.3(5) A3; Z = 4. Crystal data for 5: space group, P2(1/n) (No. 14); a = 11.3323(9) A; b = 12.3404(9) A; c = 44.583(3) A; beta = 97.089(1) degrees ; V = 6187.1(7) A3; Z = 4. Crystal data for 7: space group, P1 (No. 2); a = 11.8009(8) A; b = 11.9332(8) A; c = 11.9522(8) A; alpha = 77.904(1) degrees; beta = 95.182(9) degrees; gamma = 62.574(1) degrees V = 1450.5(2) A3; Z = 1.     

Novel octahedral tungsten sulfidocyanide cluster anion [W6S8(CN)6]6-

Novel tungsten octahedral sulfidocyanide cluster compounds Na6[W6S8(CN)6].18DMSO 1 and K6[W6S8(CN)6] 2 have been synthesized and characterized by X-ray crystallography and NMR spectroscopy.     

Synthesis and characterization of A4[Re6Q8L6]@SiO2 red-emitting silica nanoparticles based on Re6 metal atom clusters (A = Cs or K, Q = S or Se, and L = OH or CN)

Metal atom clusters constitute very promising candidates as luminophores for applications in biotechnology because they are nanosized entities offering robust luminescence in the near-infrared field (NIR). However, they cannot be used as prepared for biological applications because of potential toxic effects and quenching of the clusters' luminescence in aqueous media, and they therefore need to be dispersed in a biocompatible matrix. We describe herein the encapsulation of octahedral rhenium clusters, denoted as A(4)[Re(6)Q(8)L(6)] (A = Cs or K, Q = S or Se, and L = OH or CN), in silica nanoparticles by a water-in-oil microemulsion process, paying particular attention to the clusters' stability. The obtained A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles are 30 nm in size with good monodispersity and a perfectly spherical shape, as shown by scanning electron microscopy (SEM). The presence of cluster units inside the silica matrix was evidenced by scanning transmission electron microscopy in annular dark-field mode (ADF-STEM). From the point of view of their optical properties, the A(4)[Re(6)Q(8)L(6)]@SiO(2) nanoparticles show red and NIR emission under UV excitation, even when dispersed in water. The evolution of the structural and luminescence properties of clusters before and after encapsulation was followed by Raman and photoluminescence spectroscopy.     

W6S8] octahedral tungsten clusters functionalized with thiophene derivatives: toward polymerizable building blocks

The functionalization of octahedral [W(6)S(8)] clusters with a family of phosphino-thiophene ligands has been investigated with the goal of synthesizing extended networks of [W(6)S(8)] units covalently linked to one another through thiophene-conjugated bridges. In addition to new phosphino-thiophene ligands, eight clusters were synthesized and characterized by (1)H and (31)P NMR spectroscopies, elemental analysis, and UV-vis absorption. These clusters are formulated [W(6)S(8)(T-PPh(2))6] (1a), [W(6)S(8)(T-PEt(2))(6)] (1b), [W(6)S(8)(2T-PPh(2))(6)] (2a), [W(6)S(8)(2T-PEt(2))(6)] (2b), [W(6)S(8)(3T-PPh(2))(6)] (3a), [W(6)S(8)(3T-PEt(2))(6)] (3b), [W(6)S(8)((2T)(3)P)(6)] (4), and [W(6)S(8)(2EDOT-PEt(2))(6)] (5) (T = thiophene and EDOT = 3,4-ethylenedioxythiophene). The molecular structure of six of them has been obtained by single-crystal X-ray diffraction analysis. All of them crystallize in the P1 triclinic space group except 3b, which has the P2(1)/c monoclinic symmetry. The redox behavior of both the ligands and the corresponding functionalized clusters has been investigated by cyclic voltammetry. An attempt to electropolymerize these species is also reported.     

异金属螺旋链化合物{[W6Ag6S24][La(DMSO)8]2}n的合成及结构表征

合成了异金属含硫化合物{[W6Ag6S24][La(Me2SO)8]2}n,并用X射线单晶衍射法测定了其结构.结果表明,该化合物属三斜晶系,P-墿空间群;晶胞参数为:a=1.577 5(3),b=1.818 7(4),c=1.952 3(4)nm,α=92.210(2)°,β=106.567(3)°,γ=92.494(2)°,Z=2,Dc=2.510 g/cm3,μ=9.081 mm-1,F(000)=3 792,R1=0.040 9,wR2=0.086 9.化合物中的阴离子[(W6Ag6S24)6-]n具有异金属螺旋链结构,所有W原子和Ag原子均与S原子形成四面体配位构型.     

Synthesis and characterization of oxidized cellulose

Samples of oxidized cellulose (OC) with various carboxyl contents and degrees of crystallinity were obtained by the oxidation of native and mercerized cellulose with a solution of nitrogen(IV) oxide in CCl₄. A detailed characterization of these OC samples was performed. The effect of oxidation conditions (concentration of N₂O₄ in the solution and oxidation time) and starting cellulose material on OC characteristics (carboxyl, carbonyl and nitrogen content, degree of crystallinity and polymerization, surface area and swelling, and acidic properties) was investigated. Reactivity in the oxidation process was higher in mercerized cellulose than in native cellulose. The action of dilute solutions (10–15%) of N₂O₄ did not affect the degree of crystallinity of cellulose samples. Under these conditions, the oxidation took place mainly in amorphous regions and on the surface of crystallites. Oxidation in a concentrated (40%) N₂O₄ solution led to the destruction of crystallites, which increased the surface area and swelling of cellulose in water. The surface area and the swelling of OC samples increased with a decrease in the index of crystallinity. The acidic properties of OC were shown to increase with an increase of swelling in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4785–4791, 2004     

Synthesis and modeling study of (2S,5R,6R)- and (2S,5R,6S)-6-hydroxy- 8-(1-decynyl)-benzolactam-V8 as protein kinase C modulators

[structures: see text] Both (2S,5R,6R)- and (2S,5R,6S)-6-hydroxy-8-(1-decynyl)benzolactam-V8 were designed and synthesized as PKC modulators. Biological assays reveal the (6R)-ligand to be 20-fold more potent than its (6S)-counterpart in binding to PKC alpha.     

New class of ruthenium sulfide clusters: Ru(4)S(6)(PPh(3))(4), Ru(5)S(6)(PPh(3))(5), and Ru(6)S(8)(PPh(3))(6)

Reaction of RuCl(2)(PPh(3))(3) with S(2)(-) sources yields a family of phosphine-containing Ru-S clusters which have been characterized crystallographically and by MALDI-MS. Ru(4)S(6)(PPh(3))(4) (Ru-Ru(av) = 2.94 A) has idealized T(d)() symmetry whereas Ru(6)S(8)(PPh(3))(6) (Ru-Ru(av) = 2.82 A) adopts the idealized O(h)() symmetry characteristic of Chevrel clusters. Ru(5)S(6)(PPh(3))(5) is formally derived by the addition of Ru(PPh(3)) to one face of Ru(4)S(6)(PPh(3))(4). In terms of its M-S connectivity, the Ru(5)S(6) cluster resembles a fragment of the FeMo cluster in nitrogenase.     

Substitution of the terminal chloride ligands of [Re(6)S(8)Cl(6)](4-) with triethylphosphine: photophysical and electrochemical properties of a new series of [Re(6)S(8)](2+) based clusters

A systematic substitution of the terminal chlorides coordinated to the hexanuclear cluster [Re(6)S(8)Cl(6)](4-) has been conducted. The following complexes: [Re(6)S(8)(PEt(3))Cl(5)](3-) (1), cis- (cis-2) and trans-[Re(6)S(8)(PEt(3))(2)Cl(4)](2-) (trans-2), mer- (mer-3) and fac-[Re(6)S(8)(PEt(3))(3)Cl(3)](-) (fac-3), and cis- (cis-4) and trans-[Re(6)S(8)(PEt(3))(4)Cl(2)] (trans-4) were synthesized and fully characterized. Compared to the substitution of the halide ligands of the related [Re(6)S(8)Br(6)](4-) and [Re(6)Se(8)I(6)](3-) clusters, the chloride ligands are slower to substitute which allowed us to prepare the first monophosphine cluster (1). In addition, the synthesis of fac-3 was optimized by using cis-2 as the starting material, which led to a significant increase in the overall yield of this isomer. Notably, we observed evidence of phosphine isomerization taking place during the preparation of the facial isomer; this was unexpected based on the relatively inert nature of the Re-P bond. The structures of Bu(4)N(+) salts of trans-2, mer-3, and fac-3 were determined using X-ray crystallography. All compounds display luminescent behavior. A study of the photophysical properties of these complexes includes measurement of the excited state lifetimes (which ranged from 4.1-7.1 μs), the emission quantum yields, the rates of radiative and non-radiative decay, and the rate of quenching with O(2). Quenching studies verify the triplet state nature of the excited state.     

Synthesis and characterization of high nuclearity iron(III) phosphonate molecular clusters

Three new phosphonic acid ligands (4- (t)butylphenyl phosphonic acid, 3,5-dimethylphenyl phosphonic acid, and diphenylmethylphosphonic acid) have been synthesized and employed in search of high molecularity iron(III) clusters. The cluster compounds are characterized by single crystal X-ray diffraction and magnetic measurements. The solvothermal reaction of FeCl 3.6H 2O with diphenylacetic acid and p- (t)butylphenyl phosphonic acid resulted in an unprecedented dodecanuclear cluster [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CCHPh 2) 14(4- (t)buPhPO 3H) 6]( 1) having a double butterfly like core structure. [Fe 12(mu 2-O) 4(mu 3-O) 4(O 2CPh) 14(C 10H 17PO 3H) 6]( 2), another dodecanuclear cluster having core structure similar to 1, has been synthesized in a reaction between [Fe 3O(O 2CPh) 6(H 2O) 3]Cl and camphylphosphonic acid in the presence of triethylamine at ambient condition. 3,5-Dimethylphenyl phosphonic acid on reacting solvothermally with an oxo-centered iron triangle [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl gives a nonanuclear cluster [Fe 9(mu 3-O) 4(O 3PPh(Me) 2) 3(O 2CCMe 3) 13]( 3) having icosahedral type core structure where three positions of the iron atoms have been replaced by phosphorus. Another nonanuclear [Fe 9(O) 3(OH) 3(O 3PCHPh 2) 6(O 2CCMe 3) 6(H 2O) 9] ( 4), having a distorted cylindrical core structure, has been synthesized in a similar solvothermal reaction between [Fe 3O(O 2CCMe 3) 6(H 2O) 3]Cl and biphenylmethyl phosphonic acid. All compounds are characterized by IR spectra, elemental analysis, as well as single crystal X-ray analysis. Magnetic measurements for all the compounds reveal that there are antiferromagnetic interactions between the metal centers.     

Synthesis of (5R,8S,10R)-6-(Allyloxy)- and (5R,8S,10R)-6-(Propyloxy)ergolines from the 6-Methyl Precursors

Novel (5R,8S,10R)-6-(allyloxy)- and (5R,8S,10R)-6-(propyloxy)ergolines have been synthesized by use of a Meisenheimer [2,3]-sigmatropic rearrangement of a (5R,8S,10R)-6-allyl-ergoline N⁶-oxide as key step.