蠕变材料Ⅱ型动态扩展裂纹尖端场

为了研究粘性效应作用下的动态扩展裂纹尖端渐近场,建立了蠕变材料Ⅱ型动态扩展裂纹的力学模型,在稳态蠕变阶段,弹性变形和粘性变形同时在裂纹尖端场中占主导地位,应力和应变具有相同的奇异量级,即(σ,ε)∝r-1/(n-1)。通过渐近分析求得了裂纹尖端应力、应变和位移分离变量形式的渐近解,并采用打靶法求得了裂纹尖端应力、应变的数值结果,数值计算表明,裂尖场主要受材料的蠕变指数n和马赫数M的控制。通过对裂纹尖端场的渐近分析,从应变角度出发,提出了蠕变材料Ⅱ型动态扩展裂纹的断裂判据。     

可压缩粘弹性材料Ⅱ型动态扩展裂纹尖端场

为了研究粘性效应作用下的动态扩展裂纹尖端渐近场,建立了可压缩粘弹性材料II型动态扩展裂纹的力学模型,推导了可压缩材料Ⅱ型动态扩展裂纹的本构方程.在稳态蠕变阶段,弹性变形和粘性变形同时在裂纹尖端场中占主导地位,应力和应变具有相同的奇异量级r-1/(n-1).通过渐近分析求得了裂纹尖端应力、应变和位移分离变量形式的渐近解,并采用打靶法求得了裂纹尖端应力、应变和位移的数值结果,给出了应力、应变和位移随各种参数的变化曲线.数值计算表明,弹性变形部分的可压缩性对Ⅱ型裂尖应力场影响甚微,而对应变场和位移场影响较大.裂尖场主要受材料的蠕变指数n和马赫数M的控制.当泊松比ν =0.5时,可以退化为不可压缩粘弹性材料Ⅱ型动态扩展裂纹.     

刚性-粘弹性材料界面Ⅰ型动态扩展裂纹的尖端场

裂纹尖端渐近场的研究是断裂力学研究的重要课题之一。为了研究粘性效应作用下的界面动态扩展裂纹尖端渐近场,建立了刚性.粘弹性材料界面Ⅰ型动态扩展裂纹的力学模型;在稳态蠕变阶段,弹性变形和粘性变形同时在裂纹尖端场中占主导地位,应力和应变具有相同的奇异量级,即(σ,ε)∝r-1/(n-1)。当n→∞,幂硬化粘弹性材料动态扩展裂纹尖端场与Freund给出的理想塑性材料动态扩展裂纹尖端场具有相近的奇异量级;结合运动和协调方程,推导出粘弹性材料动态扩展裂尖场的控制方程。根据问题的边界条件和连续条件,通过数值计算,得到了裂纹尖端连续的分离变量形式的应力、应变和位移场。数值计算表明,裂纹尖端场主要受材料的蠕变指数n和马赫数M的控制,这为解决工程实践中所遇到的相应的问题和建立材料的破坏准则提供理论的参考。     

Ⅱ型动态扩展裂纹尖端的弹黏塑性渐近场

考虑材料的黏性效应建立了Ⅱ型动态扩展裂纹尖端的力学模型,假设黏性系数与塑性等效应变率的幂次成反比,通过分析使尖端场的弹、黏、塑性得到合理匹配,并给出边界条件作为扩展裂纹定解的补充条件,对理想塑性材料中平面应变扩展裂纹尖端场进行了弹黏塑性渐近分析,得到了不含间断的连续解,并讨论了Ⅱ型裂纹数值解的性质随各参数的变化规律.分析表明应力和应变均具有幂奇异性,对于Ⅱ型裂纹,裂尖场不含弹性卸载区.引入Airy应力函数,求得了Ⅱ型准静态裂纹尖端场的控制方程,并进行了数值分析,给出了裂纹尖端的应力应变场.当裂纹扩展速度(M→0)趋于零时,动态解趋于准静态解,表明准静态解是动态解的特殊形式.     

某抽水蓄能电站地下洞室围岩岩体质量特征分析

考虑材料的黏性效应建立了II型动态扩展裂纹尖端的力学模型,假设黏性 系数与塑性等效应变率的幂次成反比,通过分析使尖端场的弹、黏、塑性得到合理匹配,并 给出边界条件作为扩展裂纹定解的补充条件,对理想塑性材料中平面应变扩展裂纹尖端场进 行了弹黏塑性渐近分析,得到了不含间断的连续解,并讨论了II型裂纹数值解的性质随各参 数的变化规律. 分析表明应力和应变均具有幂奇异性,对于II型裂纹,裂尖场不含弹性卸载 区. 引入Airy应力函数,求得了II型准静态裂纹尖端场的控制方程,并进行了数值分析, 给出了裂纹尖端的应力应变场. 当裂纹扩展速度($M\to 0$)趋于零时,动态解趋 于准静态解,表明准静态解是动态解的特殊形式.     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

幂硬化可压缩材料Ⅰ型动态裂纹尖端奇异场

研究了平面应变条件下幂硬化可压缩材料中定常扩展的Ⅰ型动态裂纹尖端应力应变奇异场．采用Ｊ２流动理论和场量直角坐标分量，得到了应力应变奇异性不同时的裂纹尖端渐近场，其中场量的角变化规律和理想弹塑性材料的完全相同     

双材料界面Ⅰ型扩展裂纹尖端的弹黏塑性场

双材料界面中存在材料黏性效应, 对界面裂纹尖端场的分布和界面本身性能 的变化起着重要的影响. 考虑裂纹尖端的奇异性, 建立了双材料界面扩展裂纹尖端的弹黏塑 性控制方程. 引入界面裂纹尖端的位移势函数和边界条件, 对刚性-弹黏塑性界面I型界面 裂纹进行了数值分析, 求得了界面裂纹尖端应力应变场, 并讨论了界面裂纹尖端场随各影响 参数的变化规律. 计算结果表明, 黏性效应是研究界面扩展裂纹尖端场时的一个主要因素, 界面裂纹尖端为弹黏塑性场, 其场受材料的黏性系数、马赫数和奇异性指数控制.     

扩展裂纹准静态渐近解中的矛盾

裂纹尖端附近的应力应变场是一个相当复杂的问题,对于不同的情况,这个场具有完全不同的渐近属性.具体说来,场的渐近属性取决于裂纹状态(静止还是扩展)、几何特征(平面应变还是平面应力)、加载速度(准静态还是动态)、裂纹型式(Ⅰ、Ⅱ、Ⅲ型)及材料性质(弹性、塑性、蠕变、……).其中,人们较为重视的一种情况是扩展裂纹尖端的塑性场.而且,为了使问题简化,通常采用准静态假定.对于理想塑性材料Ⅲ型扩展裂纹的渐近解由Chitaley和McClintock给出.对于Ⅰ型裂纹,Slepyan采用Tresca属服条件给出了渐近解,高玉臣和Rice采用Mises屈服条件得到了渐近解,但这些解只适用于     

压-剪混合型定常扩展裂纹尖端的弹黏塑性场

假定黏性系数与塑性等效应变率的幂次成反比,考虑其黏性和裂纹面摩擦接触效应 建立了压-剪混合型定常扩展裂纹尖端弹黏塑性场的渐近方程,求得了裂纹尖端场不含应力、应变间 断的数值解. 并讨论了压-剪混合型裂纹数值解随各个参数的变化规律,计算结果 和分析表明,压-剪混合型裂纹尖端场是满塑性的,不含有弹性卸载区,黏性效应是研究扩展裂纹尖端场时的一个重要因素. 无论混合裂纹趋近I型还是趋近II型,静水压力随摩擦系数的增加都是增加的,裂纹面摩擦 效应是阻止裂纹扩展速度的因素,且摩擦作用越强,裂纹尖端场的韧性越高.     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

Preface

This special issue of PARTICUOLOGY is devoted to the first UK-China Particle Technology Forum taking place in Leeds, UK, on 1-3 April 2007. The forum was initiated by a number of UK and Chinese leading academics and organised by the University of Leeds in collaboration with Chinese Society of Particuology, Particle Technology Subject Group （PTSG） of the Institution of Chemical Engineers （IChemE）, Particle Characterisation Interest Group （PCIG） of the Royal Society of Chemistry （RSC） and International Fine Particle Research Institute （IFPRI）. The forum was supported financially by the Engineering and Physics Sciences Research Council （EPSRC） of United Kingdom,     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.