Structural and spectroscopic study of a novel erbium titanate pink pigment prepared by sol-gel methodology

Pyrochlore oxides show a large variety of physical and chemical properties depending on the ordering/disordering of the cations and oxygen vacancies. Taking account of these structural features and the luminescent properties of lanthanides, a new family of colored materials is investigated. This paper studies the structural evolution of the erbium titanate system with temperature to establish its influence on the color properties. The success on the development of color is completely related to the sol-gel preparation method, underlining its higher reactivity compared to classical solid-state synthesis. After firing at 700 degrees C, the sol-gel material develops an intense pink coloration whose intensity significantly diminishes at 800 degrees C. X-ray diffraction and Rietveld refinements indicated the presence of nanocrystals with a fluorite-like structure at 700 degrees C, responsible for the intense coloration, which suffers a gradual atomic rearrangement toward an "ideal" pyrochlore phase. These results were corroborated by infrared and Raman measurements. UV-vis spectroscopy showed the influence of the Er(3+)-O bond covalence on the spectral properties. This study opens new perspectives to the development of more ecological colored sol-gel materials based on rare earth elements. Furthermore, the combination of the optical aspects with the classical pyrochlore properties (magnetization, heat capacity, conductivity, etc.) would provide new multifunctional materials for advanced applications.     

Structural and spectroscopic properties of LaOF:Eu3+ nanocrystals prepared by the sol-gel Pechini method

A new method was used to obtain Eu(3+)-doped LaOF nanocrystals. The obtained nanocrystals were synthesized for the first time using a modified Pechini sol-gel method. The products were analyzed by X-ray powder diffraction and the Rietveld method. Optimal conditions for the synthesis were found. Luminescent properties of the tetragonal and rhombohedral LaOF:Eu(3+) nanocrystals were investigated by collecting excitation and luminescence spectra. The most effective dopant concentrations in both hosts were found. Luminescent lifetimes were also measured. The time-resolved luminescent traces showed both a growth and a decay, which pointed to energy transfer processes between Eu(3+) ions in the LaOF host. In order to explain these phenomena, an adequate mechanism has been proposed. Intensity parameters Ω(2), Ω(4) and quantum efficiencies were calculated using the Judd-Ofelt theory, allowing for an extensive study of the luminescent properties of Eu(3+) ion in the LaOF matrix.     

Structural,optical and photoelectron spectroscopic studies of nano/micro ZnO:Cd rods synthesized via sol-gel route

Thin films of cadmium doped zinc oxide rod like microstructure have been synthesized by a very simple sol-gel dip coating technique. Sols were prepared from hydrated zinc oxide precursor and 2-methoxyethanol solvent with monoethanolamine as a sol stabilizer. XRD pattern confirmed the hexagonal wurtzite structure of the deposited ZnO films. Surface morphologies of the films have been studied by a scanning electron microscope and an atomic force microscope, which confirmed that the films are composed of densely packed randomly oriented nano/submicron rods with diameter in the range 300–400 nm having various lengths. We proposed a possible growth mechanism for this rodlike structure. X-ray photoelectron spectroscopic study was used to determine the binding energies and the Zn 2p3/2, Cd 3d5 and O 1s peaks in the XPS spectra were located at 1021.08 eV, 404.6 eV and 529.8 eV respectively, which confirmed the Cd doping in ZnO. Cadmium content in the film was estimated both from energy dispersive X-ray analysis and XPS measurement. Band gap energy determined from optical transmittance spectra systematically varied from 3.28 eV to 3.15 eV for 0% to 5.6% of Cd doping. Urbach parameter determined from the band tail of the transmittance spectra showed that it increased with doping percentage and this parameter for a fixed cadmium doping level decreased with increase of temperature.     

Removal of plutonium from carbonate medium using titania microspheres prepared by sol-gel route

Spherical beads of titania were prepared by a sol-gel route. During the preparation a cationic surfactant was added in the feed broth to modify the surface characteristics of the microspheres. The absorption behavior of Pu(IV) from carbonate medium on these microspheres was studied by batch experiments. Loading and elution behavior of Pu(IV) on a bed of titania microspheres was studied and the practical capacity was determined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structural evolution upon heating of sol-gel prepared birnessites

Birnessites containing K⁺ and Na⁺ in the interlayer have been prepared by a sol-gel method using glucose and polyvinyl alcohol as reducing agents. The samples have been characterised by elemental chemical analysis, powder X-ray diffraction, thermal analysis (differential and thermogravimetric), FT-IR spectroscopy and specific surface area and texture assessment by nitrogen adsorption at −196 °C. The solids obtained are more crystalline than those prepared by oxidation with H₂O₂ in a basic medium. The samples are thermally stable and evolution upon calcination at high temperature depends on the precise nature of the interlayer cation. So, calcination at 600 °C of a K-birnessite leads to formation of cryptomelane (2×2 tunnel structure), while the Na analogue leads to formation of mixed Mn-Na oxides with different tunnel structures. Ion exchange of interlayer cations takes place topotactically at room temperature; Li⁺ enters easily in the interlayer, while the entrance of Mg²⁺ is more difficult, probably because of its high stability in the hydrated form; increasing of the temperature and contacting time during ion exchange does not improve very largely the process.     

Small angle X-ray scattering study of surface modified tin oxide nanoparticles prepared by sol-gel route

The surface properties of SnO₂ nanoparticles were modified by grafting ionic (Tiron®_, (OH)₂C₆H₂(SO₃Na)₂·H₂O) or non-ionic (Catechol®_, C₆H₄-1,2-(OH)₂) capping molecules during aqueous sol-gel processing to improve the redispersibility of powdered xerogel. The effect of the amount of grafted organic molecules on the redispersibility of powders in aqueous solution at several basic pH values was studied. The nanostructural features of the colloidal suspensions were analyzed by small angle X-ray scattering (SAXS) measurements. Irrespective of the nature and amount of grafted molecules, complete redispersion was obtained in aqueous solution at pH = 13. The redispersion at pH = 11 results in a mixture of dispersed primary particles and aggregates. The proportion of well dispersed nanoparticles and aggregates (and their average size) can be tuned by the quantity of grafted ionic molecules.     

Dielectric properties of FeNbO4 ceramics prepared by the sol-gel method

In this work, FeNbO₄ powders were prepared using the sol-gel method. The fine powder particles were pressed into pellets and sintered at temperatures between 500 and 1200 °C. The powder was studied by X-ray diffraction and Raman spectroscopy. The morphology of the grains was investigated by scanning electron microscopy. Heat-treatment of the particles results in higher crystallinity, larger grains, and a decrease in the porosity of the material.The dielectric properties were measured in the frequency range of 10²–10⁶ Hz, in function of temperature (200–370 K). In all samples the real (ε′) and imaginary (ε″) parts of the complex permittivity increase with increasing annealing temperature. The sample heat treated at 1200 °C shows the highest ε′, > 10⁴ at 300 K. All samples show a dielectric relaxation phenomenon, analysed using the modulus formalism. The evolution of the ac conduction activation energy and of the activation energy associated with the relaxation mechanism, is directly related with the changes promoted by the heat treatment in the structure and in the morphology of the base powders.     

Electrochemical performance of LiMn2O4 microcubes prepared by a self-templating route

LiMn₂O₄ microcubes with a size of 10–15 μm have been synthesized by a facile self-templating route starting from cubic MnCO₃. The LiMn₂O₄ microcubes exhibit a hierarchical structure, where the cubes are stacked from parallel plates with a thickness of 200 nm, where each plate is composed of interconnected nanoparticles with a size of around 200 nm. The cubic LiMn₂O₄ shows excellent rate capability and high-rate cycling stability. At 10 C, it can yield a discharge capacity of 108 mAh g^?1. A discharge capacity of 88 mAh g^?1 can be retained after 100 cycles at 10 C. The excellent electrochemical performance makes it a promising cathode for high-power Li-ion batteries.     

Spectroscopic investigations on the photodegradation of toluidine blue dye using cadmium sulphide nanoparticles prepared by a novel method

A novel method to prepare cadmium sulphide nanoparticles (CdS NPs) possessing nearly uniform size was adopted using eggshell membrane (ESM), under different pH conditions. Significant yield of CdS NPs with smallest possible size was obtained by increasing the pH of the reaction medium from acidic to alkaline. The above prepared CdS NPs have been characterized by UV-vis absorption as well as emission spectra, powder X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The efficiency of the above prepared CdS NPs as a catalyst for the photodegradation of toluidine blue (TB) dye, as a function of pH as well as the ratio between the catalyst and the substrate was studied after irradiation with UV light. The results showed that an efficient interaction took place between the catalyst and the substrate to cause degradation of the selected dye. A maximum degradation of toluidine blue dye (90%) was observed at pH 8 which is higher than that of the efficiencies at pH 4 and pH 6.     

FTIR spectroscopic investigations of supersaturated NaClO4 aerosols

Supersaturated NaClO4 aerosols have been studied using a Fourier transform infrared (FTIR) spectrometer coupled with an aerosol flow tube (AFT). Compared with previous Raman results, the water O-H stretching envelope in the supersaturated solutions of NaClO4 aerosols was more structured in response to changing RH, revealing at the same time the existence of water monomers weakly hydrogen-bonded with ClO4- at extremely high concentrations. Due to enhanced ion interactions in the supersaturated solutions of NaClO4 aerosols, the formation of contact ion pairs (CIPs) could be observed without component decomposition for the nondegenerate nu1 band of ClO4-, and the degenerate nu3 band of ClO4- was successfully related to the formation of CIPs in NaClO4 solutions. Based on these observations, a new mechanism featured by the attack of ClO4- upon hydrated Na+ for CIPs formation in the supersaturated solutions of NaClO4 aerosols was further proposed. The anhydrous NaClO4, characterized by the upper limit deliquescence relative humidity (DRH) of approximately 43% and the disappearance of the nu1 band of ClO4- in the infrared spectra, was observed to form on the silicon windows at low RHs.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.     

Structural and electrical properties of Ca doped BiFeO3 multiferroic nanomaterials prepared by sol-gel auto-combustion method

Sol-gel auto combustion method was adopted for the synthesis of Bi_1-xCa_xFeO₃ (x = 0.00, 0.05, 0.1, 0.15, 0.2 and 0.25) multiferroic nanoparticles and their structural and electric properties were investigated. The two peaks at (012) and (110) planes at diffracting angles (2θ) of 31.9° and 32.1° in the XRD pattern indicates their rhombohedral structure with the R3c space group. The cole-cole plot in the 10 Hz–1 MHz frequency range shows the increasing semicircles shifting towards higher frequency, indicating increasing grain and grain boundaries.     

Voltammetric and spectroscopic investigations of 4-nitrophenylferrocene interacting with DNA

Cyclic voltammetry (CV) coupled with UV–vis and fluorescence spectroscopy were used to probe the interaction of potential anticancer drug, 4-nitrophenylferrocene (NFC) with DNA. The electrostatic interaction of the positively charged NFC with the anionic phosphate of DNA was evidenced by the findings like negative formal potential shift in CV, ionic strength effect, smaller bathochromic shift in UV–vis spectroscopy, incomplete quenching in the emission spectra and decrease in viscosity. The diffusion coefficients of the free and DNA bound forms of the drug were evaluated from Randles–Sevcik equation. The binding parameters like binding constant, ratio of binding constants (K_red/K_ox), binding site size and binding free energy were determined from voltammetric data. The binding constant was also determined from UV–vis and fluorescence spectroscopy with a value quite close to that obtained from CV.     

A convenient sol-gel route for the synthesis of salicylate-titania nanocomposites having visible absorption and blue luminescence

Syntheses of titania-based nanomaterials by simple sol-gel route using a mixture of CTAB and salicylate as well as salicylate ions as templates have been reported. The materials are characterized by the powder X-ray diffraction (XRD), thermal analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and spectroscopic (FT IR, UV-VIS) analyses. A disordered mesoscale orientation of nanoparticles (ca. 2-4 nm) composed of TiO₂-salicylate surface complex has been obtained when 1:1 mixing ratio of CTAB and salicylate at the CTAB concentration of 0.001 M was employed as a template. All these nanocomposites exhibit a considerable red shift at the onsets of their absorption band compared to pure (organic-free) nanocrystalline TiO₂ and show blue luminescence at room temperature. This assembly of nanoparticles is highly interesting in the context of visible light sensitization and nanodevice fabrication.     

Structural, textural, and electronic properties of a nanosized mesoporous ZnxTi1-xO2-) solid solution prepared by a supercritical drying route

Mesoporous nanosized TiO2 and Zn(x)Ti(1-x)O(2-x) solid solution having a Zn content below 10 mol % with a particles size between 13 and 17 nm are prepared by a template-free sol-gel method followed by high-temperature supercritical drying in 2-propanol. The structural, textural, and electronic properties of the obtained nanomaterials are methodically investigated by using XRD, SEM, TEM, ED, HREM, EDX, ICP-OES, N(2) adsorption-desorption, Raman spectroscopy, and diffuse reflectance UV-vis spectroscopy. It is shown that the proposed synthesis technique leads to the formation of a Zn(x)Ti(1-x)O(2-x) solid solution based on the anatase crystal structure rather than a two-phase sample. High-resolution electron microscopy and electron diffraction indicate that the distribution of zinc atoms over the anatase structure does not lead to a considerable deformation of the crystal structure.     

Genesis and activity of mo-based hydrotreating catalysts prepared by a sol-gel method

Molybdenum oxide-alumina catalysts used in hydrodesulfurization (HDS) with a wide range of Mo loadings (1–25% Mo) were prepared by the sol-gel process. Two different methods of adding the molybdenum oxide precursor to the support were used.In the first route, alumina is prepared by hydrolysis of aluminium tri sec-butylate in butanol and butanediol, and molybdenum is deposited by a classical dry impregnation with ammonium heptamolybdate (AHM). In the second route, the molybdenum oxospecies are dispersed in butanediol and added to the aluminium alkoxide before hydrolysis. The solids were calcined to obtain the oxide precursors which are then sulfided to give the active phase in hydrodesulfurization.The effect of preparation on the structural properties of alumina as well as on the state and dispersion of molybdenum in the dried, calcined and sulfided form was studied by various characterization techniques (XRD, XPS, Raman spectroscopy). Molybdenum appears to be present as well dispersed oxomolybdenum species in the oxide form even at high loadings. This good dispersion of molybdenum is preserved after sulfidation which induces the formation of MoS₂ crystallites whose morphology has been determined by HREM.The catalyst activities were evaluated in thiophene hydrodesulfurization and compared with that of catalysts prepared by dry impregnation of a commercial alumina. The observed performances are in agreement with the good dispersion of molybdenum at high loadings we were able to obtain owing to the sol-gel process.     

Halogenated blue pigments of a deep sea gorgonian

Three halogenated azulenes (2-4), one of the chiral, have been isolated from a deep sea gorgonian which was collected by minisubmersible at ?350 m.     

Structural and spectroscopic investigations on Eu3+-doped alkali fluoroborate glasses

Eu³⁺-doped alkali fluoroborate glasses B₂O₃–XCO₃–NaF–Eu₂O₃ (where X = Li₂, Na₂, K₂, and Ca, Mg) have been prepared using the conventional melting technique and their structural and optical properties have been evaluated. The XRD pattern of the glasses confirmed the amorphous nature and the FTIR spectra reveal the presence of BO₃ and BO₄ units as their local structures along with the strong OH^? groups. From the absorption spectra the bonding parameters have been calculated and confirmed that the Eu–O bonds in the studied glasses are of covalent nature. Judd–Ofelt (JO) analysis has been carried out from the emission spectra. The JO parameters have been used to calculate transition probabilities (A), lifetime (τ_R) and branching ratios (β_R) and peak stimulated emission cross-section (σ_P^E) for the ⁵D₀ → ⁷F_J (J = 1, 2, 3 and 4) transitions of the Eu³⁺ ions. The decay from the ⁵D₀ level of Eu³⁺ ions in the title glasses has been measured and analysed. The lifetime of the ⁵D₀ level is found to be shorter than the reported glasses which may be due to the presence of OH^? groups.     

A scratch-resistant single-layer antireflective coating by a low temperature sol-gel route

A novel quarterwave-thick narrow-bandwidth antireflective coating has been developed for both plastic and vitreous substrates by a sol-gel route. This coating has revealed pronounced scratch- and climatic-resistance under adverse conditions. The single-layer coating consists basically of a composite material made of silica as the discontinuous phase and of a polytetrafluoroethylene-derived (Teflon¹) organic polymer as the continuous phase. This leads to fluorine-containing colloidal silica product, or a so-called Flucosil coating. The coating is applied by spinning or dipping from specific solutions at room temperature followed by a mild and short heat treatment. In addition to remarkable abrasion and environmental resistance properties, such coatings have displayed excellent laser-induced damage threshold levels, surpassing uncoated substrates.We hope such a product might open new perspectives concerning household articles, architectural optical thin-films, ophthalmic uses, and so on.     

Structural and spectroscopic investigations on the quenching free luminescence of europium oxalate nanocrystals

The structural features leading to the intense quenching free luminescence exhibited by europium oxalate nanocrystals, poly[[hexaaquatri‐μ₂‐oxalato‐dieuropium] 4.34‐hydrate], {[Eu₂(C₂O₄)₃(H₂O)₆]·4.34H₂O}_n, is the focal point of this report. Europium oxalate nanocrystals were synthesized by a simple microwave‐assisted co‐precipitation method. Powder X‐ray diffraction analysis revealed the monoclinic structure of the nanocrystals and the phase purity. The morphology and particle size were examined by transmission electron microscopy (TEM) analysis. Luminescence measurements on a series of samples of La_2–xEu_x(C₂O₄)₃·10H₂O, with x varying in the range 0.1 to 2, established the quenching free nature exhibited by the europium oxalate nanocrystals. A single‐crystal structure analysis was carried out and the quenching free luminescence is explained on the basis of the crystal structure. A detailed photoluminescence characterization was carried out using excitation and emission studies, decay analysis, and CIE coordinate and colour purity evaluation. The various spectroscopic parameters were evaluated by Judd–Ofelt theoretical analysis and the results are discussed on the basis of the crystal structure analysis.