光引发阳离子聚合反应的研究——Ⅱ.硫鎓盐DPTS引发乙烯基正丁醚光聚合动力学

以二苯基-4-苯硫基代苯基硫鎓盐(DPTS)为光引发剂,研究了乙烯基正丁醚的本体和溶液光聚合。在本体聚合中,聚合速率(R_p)与引发剂浓度成正比;在15～35℃范围内,聚合活化能几乎为零。分别以CHCl₃(CH₂Cl)₂和C₆H₅Cl作溶剂的溶液聚合,其R_p均比本体聚合者大,同时单体浓度对R_p的影响则表现出复杂的关系。根据普遍接受的硫鎓盐光解机理并假设溶剂和单体均可不同程度地参与引发反应,解释了溶液聚合中单体影响的动力学规律。     

The temperature dependence of the two positronium bubble states in liquid SF6

Positron lifetime measurements have been performed on liquid SF₆ in the temperature range from −45°C to 71°C (T_c = 45.65°C). The positron lifetime spectra were resolved into four lifetime components. In the order of increasing lifetimes the four lifetime components are associated with the decay of para-positronium (p-Ps), free positrons, ortho-positronium (o-Ps) from a small bubble state, and o-Ps from a large bubble state. The lifetime of o-Ps annihilating from the large bubble state τ₄ increases from 5.7 ns at −45°C to 19.5 ns at 53°C. The lifetime of o-Ps annihilating from the small bubble state τ₃ was found to be 2–2.5 ns in the main part of the temperature range studied. Apparently, this is the first observation of two different o-Ps states in a liquid. The intensity I₄ (I₃) increases (decreases) from 16.9% (16%) at −45°C to 47.2% (6.4%) at the critical point while above I₃ and I₄ are essentially temperature independent. The large Ps bubble state seems to be similar to the Ps bubble state found in most liquids.     

Hydrothermal Synthesis and Thermal Stability of Natural Mineral Lindgrenite

IntroductionSynthesis of natural minerals is helpful for tracingthe geological origin of mineral formation and forverifying the quality of minerals. The investigations onthe conditions for mineral formation, such as pressure,temperature, and starting mate…     

Preparation and crystal structure of a 1:1 inclusion compound of 1,4,11,14-tetramethoxy-dibenzo[b,n]tetraphenylene with pyridine

The new host 1,4,11,14-tetramethoxy-dibenzo[b,n]tetraphenylene forms a 1:1 inclusion compound with pyridine, in which a pair of centrosymmetrically-related guest species are enclosed in the cage surrounded by six host molecules. C₃₆H₂₈O₄·C₅H₅N, F_W=603.68, triclinic, space group P-1, a=11.796(2), b=16.075(3), c=9.004(2) Å; =98.39(3)°, β=90.01(3)°, γ=108.19(3)°, V=1602.8(5) Å³, Z=2, F(000)=636, D_c=1.251 g/cm³, μ=0.080 mm⁻¹. The final R indices [I>2σ(I)] R₁=0.0759, wR₂=0.1970 for 5623 MoK observed data.     

Syntheses and structural determination of nine-coordinate K3[Nd(nta)2(H2O)]·6H2O and K3[Er(nta)2(H2O)]·5H2O

The syntheses and structural determination of Nd^III and Er^III complexes with nitrilotriacetic acid (nta) were reported in this paper. Their crystal and molecular structures and compositions were determined by single-crystal X-ray structure analyses and elemental analyses, respectively. The crystal of K₃[Nd^III(nta)₂(H₂O)]·6H₂O complex belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5490(11) nm, b=1.3028(9) nm, c=2.6237(18) nm, β=96.803(10)°, V=5.257(6) nm³, Z=8, M=763.89, D_c=1.930 g cm⁻³, μ=2.535 mm⁻¹ and F(000)=3048. The final R₁ and wR₁ are 0.0390 and 0.0703 for 4501 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0758 and 0.0783 for all 10474 reflections, respectively. The Nd^IIIN₂O₇ part in the [Nd^III(nta)₂(H₂O)]³⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly. The crystal of the K₃[Er^III(nta)₂(H₂O)]·5H₂O complex also belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5343(5) nm, b=1.2880(4) nm, c=2.6154(8) nm, b=96.033(5)°, V=5.140(3) nm³, Z=8, M=768.89, D_c=1.987 g cm⁻³, μ=3.833 mm⁻¹ and F(000)=3032. The final R₁ and wR₁ are 0.0321 and 0.0671 for 4445 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0432 and 0.0699 for all 10207 reflections, respectively. The Er^IIIN₂O₇ part in the [Er^III(nta)₂(H₂O)]³⁻ complex anion has the same structure as Nd^IIIN₂O₇ part in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly.     

醚基功能化离子液体[MOEMIm]Cl和[EOEMIm]Cl热力学性质

通过核磁共振氢谱,核磁共振碳谱,元素分析和热重分析对醚基功能化的离子液体[MOEMIm]Cl和[EOEMIm]Cl进行了表征。在温度范围T=288.15–328.15 K内,测定了离子液体[MOEMIm]Cl和[EOEMIm]Cl的密度(ρ)、表面张力(γ)和折光率(nD)。根据这些实验数据,讨论并计算了离子液体[MOEMIm]Cl和[EOEMIm]Cl的体积性质。计算出离子液体[MOEMIm]Cl和[EOEMIm]Cl的摩尔表面吉布斯自由能(gs)、摩尔表面熵(s)、摩尔表面焓(h)、摩尔极化度(Rm)和摩尔极化率(αp),h均近似为一个常数说明这两种离子液体从内部到表面的过程是一个等库仑过程,同时这两种离子液体的Rm和αp均与温度无关。本文还用摩尔表面Gibbs自由能改进Lorentz-Lorenz方程并预测离子液体表面张力,预测值与实验值高度相关。     

Structure and conformation of 2,3,4-triphenyl-1-oxa-4-azabutadiene

2,3,4-triphenyl-1-oxa-4-azabutadine (C20H15NO) has been studied by X-ray analysis and AM1 molecular orbital methods. It crystallises in the triclinic space group P-1 with a=9.414(3), b=10.479(3), c=8.385(2) Å, =103.31(3)°, β=97.10(3)°, γ=74.09(1)°, V=772.5(4) ų, Z=2, D_c=1.227 gcm⁻³, and μ(MoK)=0.075 mm⁻¹ and F₀₀₀=300. The structure was solved by direct methods and refined to R=0.043 for 2672 reflections [I>2σ(I)]. The conformational analysis of the title compound were investigated by semi-empirical quantum mechanical AM1 calculations. The minimum conformation energies were calculated as a function of the three torsion angles θ₁(O(1)C(7)C(8)N(1)), θ₂(C(8)N(1)C(15)C(16)) and θ₃(C(14)C(9)C(8)N(1)). The results are compared with the X-ray results. C=O and C=N groups are twisted about each other by 95.5(2)°.     

Temperature dependence of positron annihilation lifetime spectra for polyethylene: positron irradiation effects

Lifetime spectra for linear and branched polyethylene have been measured as a function of temperature. The longest lifetime, τ₃, and its intensity, I₃, are traced over a temperature range of 105–370 K. The lifetime decreases with decreasing temperature, and upon reheating the plot is retraced. I₃ has a minimum near 265 K with considerable hysteresis in the cooling/heating cycle. At the lower temperatures the increase in I₃ is attributed to source irradiation.     

Comprehensive study of positronium formation in polymer blends between polyethylene and ethylene-vinylacetate copolymer

The intensity I₃ of ortho-positronium (o-Ps) in a polymer blend system consisting of polyethylene (PE) and ethylene-vinylacetate (EVA, random copolymer with a vinylacetate content of about 14%) was measured as functions of EVA weight content (Φ=0–100%), electric field (E=0–60 kV/cm ), positron irradiation time (t=0–200 h) and temperature (T=100–300 K). It was found that the addition of small amounts of EVA to PE significantly alters the electric field, positron irradiation time and temperature dependence of I₃. Positron trapping on polar EVA is suggested to be responsible for the sensitive effects of EVA.     

吡啶基离子液体[C_6py][DCA]热力学性质及利用新E?tv?s方程预测其表面张力

制备了吡啶类离子液体N-己基吡啶二氰胺盐[C_6py][DCA],并用核磁共振氢谱(~1H NMR)、核磁共振碳谱(~(13)C NMR)、差热扫描量热(DSC)、傅里叶变换红外(FT-IR)光谱对其进行表征。在288.15–338.15 K温度范围内,采用标准加入法,测定其密度(ρ)、表面张力(γ)和折光率(n_D)。在测得的实验数据的基础上,得到了离子液体[C_6py][DCA]的分子体积(V_m)、表面能(E_a)、摩尔极化度(R_m)和极化率(α_p)。结果显示E_a、R_m和α_p几乎不随温度的变化而发生改变。本文还提出了摩尔表面Gibbs自由能(g_s)的概念,并改进了E?tv?s方程。同时还计算了gs、临界温度(T_c)和E?tv?s方程经验参数(kE),并预测了离子液体[C_6py][DCA]的表面张力,预测值与实验值具有较好的一致性。     

几种荧光有机化合物的电荷转移光谱

具有荧光的有机化合物是一些具有多个共轭双键,分子呈平面结构,有大的电子离域体系的化合物.     

Photochemical synthesis and structural characterization of (η-C5Me5)3Mo3(CO)4(μ2-H)(μ3-O): an unprecedented 46-electron trimolybdenum cluster containing a localized monoprotonated Mo---Mo double bond

Irradiation of the 30-electron Mo₂(η⁵-C₅Me₅)₂(CO)₄ and Re₂(CO)₁₀ in toluene solution (containing H₂O) afforded (in 1–2% yields) a novel triangular metal cluster, (η⁵-C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) (1), which was characterized by a single-crystal X-ray diffraction study. Compound 1, of pseudo C_s-m symmetry, has a triangulo-Mo₃(η₃-O) core with composite Mo---H---Mo and Mo---Mo electron-pair bonds along one unusually short edge (2.660(1) Å) and Mo--- electron-pair bonds along the other two edges (2.916(1) and 2.917(1) Å). The edge-bridged hydride ligand, which displays a characteristic high-field proton NMR resonance at δ −17.79 ppm, was not found from the crystallographic determination but was located via a quantitative potential-energy-minimization method. This procedure unambiguously established that the optimized hydrogen position, which corresponds to a distinct coordination site with identical Mo---H distances of 1.85 Å, is the only one that can be sterically occupied by a metal-bound hydride ligand. This 46-electron species is the first electron-deficient trimolybdenum cluster containing a monoprotonated Mo---Mo double bond; its existence is attributed to ligand overcrowding due to the bulky pentamethylcyclopentadienyl rings. Black (η⁵- C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) · 1/2THF crystallizes with two formula species in a triclinic unit cell of P1 symmetry with a 8.603(4), b 11.115(4), c 19.412(11) Å, 80.69(4)°, β 101.10(4)°, and γ 98.88(3)° at −40° C. Least-squares refinement (RAELS with 221 variables) of one independent Mo₃ molecule and a centrosymmetrically-disordered THF molecule converged at R₁(F) 5.62%, R₂(F 6.88% for 8460 independent diffractometry data (I₀ ρ 3σ(I₀ collected at −40° C with Mo-K radiation     

Effect of the encapsulating material on the peak3/peak5 response ratio of TLD-300 irradiated with neutrons of various energy

The analysis of experimental data available in the literature shows that the neutron sensitivity ratio m=k₃/k₅ for the two main glow peaks P₃ and P₅ of TLD-300 (for ribbons of 3.2×3.2×0.9 mm³) is dependent upon the response ratio R₃/R₅ of these two peaks. This finding is in agreement with predictions from an equation derived from the two-peak method equations. The result implies that the peak response ratio R₃/R₅ for TLD-300 surrounded by Tissue Equivalent material is independent of the encapsulating material. This is also demonstrated experimentally.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

Solubility equilibria in the uric acid-sodium urate-water system

In a constant ionic medium, corresponding to a physiological environment (I_c = 0.15 mol dm⁻³ NaCl), the solubilities of anhydrous uric acid, uric acid dihydrate and monosodium urate monohydrate have been measured as a function of p[H] = −log[H⁺](2-8) and temperature (25°, 32°, 37° and 42°C). The solubility equilibria in the uric acid-sodium urate-water system are discussed on the basis of the solubility constants (K_s) and the first dissociation constant (K₁) of uric acid and the solubility product (K_s0) of monosodium urate. The quantities measured in this work are in good agreement with literature values, however, the present solubility data have a much higher precision.     

Comparison of the effects of visible femtosecond laser pulses and continuous wave laser radiation of low average intensity on the clonogenicity of Escherichia coli.

To evaluate the contribution of local pulsed heating of light-absorbing microregions to biochemical activity, irradiation of Escherichia coli was carried out using femtosecond laser pulses (λ = 620 nm, τ_p=3 × 10⁻¹³ s, f_p = 0.5 Hz, E_p = 1.1 × 10⁻³J cm⁻², I_av = 5.5 × 10⁻⁴ W cm⁻², I_p = 10⁹ W cm⁻²) and continuous wave (CW) laser radiation (λ = 632.8 nm, I = 1.3 W cm⁻²). The irradiation dose required to produce a similar biological effect (a 160%–190% increase in the clonogenic activity of the irradiated cells compared with the non-irradiated controls) is a factor of about 10³ lower for pulsed radiation than for CW radiation (3.3 × 10⁻¹ and 7.8 × 10² J cm⁻² respectively). The minimum size of the microregions transiently heated on irradiation with femtosecond laser pulses is estimated to be about 10 Å, which corresponds to the size of the chromophores of hypothetical primary photoacceptors—respiratory chain components.     

Synthesis and application of diphenylbis (3,5-dimethylpyrazol-1-yl)methane to form η-arene complexes of molybdenum

The neutral nitrogen-bidentate ligand, diphenylbis(3,5-dimethylpyrazol-1-yl)methane, Ph₂CPz′₂, can readily be obtained by the reaction of Ph₂CCl₂ with excess HPz′ in a mixed-solvent system of toluene and triethylamine. It reacts with [Mo(CO)₆] in 1,2-dimethoxyethane to give the η²-arene complex, [Mo(Ph₂CPz′₂)(CO)₃] (1). This η²-ligation appears to stabilize the coordination of Ph₂CPz′ ₂ in forming [Mo(Ph₂CPz′₂)(CO)₂(N₂C₆H₄NO₂-p)][BPh₄] (2) and [Mo(Ph₂CPz′₂)(CO)₂(N₂Ph)] [BF₄] (3) from the reaction of 1 with the appropriate diazonium salt but the stabilization seems not strong enough when [Mo{P(OMe)₃} ₃(CO)₃] is formed from the reaction of 1 with P(OMe)₃. The solid-state structures of 1 and 3 have been determined by X-ray crystallography: 1-CH₂Cl₂, monoclinic, P2₁/n, a = 11.814(3), b = 11.7929(12), c = 19.46 0(6) Å, β = 95.605(24)°, V = 2698.2(11) ų, Z = 4, D_calc = 1.530 g/cm³ , R = 0.044, R_w = 0.036 based on 3218 reflections with I > 2σ(I); 2 (3)-1/2 hexane-1/2 CH₃OH-1/2 H₂O-1 CH₂Cl₂, monoclinic, C2/c, a = 41.766(10), b = 20.518(4), c = 16.784(3) Å, β = 101.871(18)°, V = 14076(5) ų, Z = 8, D_calc = 1.457 g/cm³, R = 0.064, R_w = 0.059 based on 5865 reflections with I > 2σ(I). Two independent cations were found in the asymmetric unit of the crystals of 3. The average distance between the Mo and the two η²-ligated carbon atoms is 2.574 Å in 1 and 2.581 and 2.608 Å in 3. The unfavourable disposition of the η²-phenyl group with respect to the metal centre in 3 and the rigidity of the η²-arene ligation excludes the possibility of any appreciable agostic C---H → Mo interaction.     

Kinetic and mechanistic study of the chlorpromazine-hydrogen peroxide reaction for the catalytic spectrophotometric determination of iodide

Extensive kinetic studies were performed to investigate the mechanism of the chlorpromazine (CP)-hydrogen peroxide reaction utilized in the catalytic determination of iodide. This reaction proceeds by two independent, parallel reactions, one through the formation of a red free radical, another directly to form the colorless product. The red color formation is catalyzed by traces of iodide. The color formation reaction was followed by measuring the increase in absorbance at 525 nm and its kinetic investigations were carried out by the initial rate method. The reaction rate curves for colorless sulfoxide formation were obtained by following the increase in absorbance at 335 nm, and the analysis was carried out by the integration method. The disappearance rate of CP is given by -d[CP]dt = k₃[I⁻[H₂O₂][H⁺] + k₆[CP][H₂O₂][H⁺] + k₉[CP][H₂O₂][H⁺] + k₁₀[CP][H₂O₂], where the first and second terms correspond to the chromogenic reaction and the third and fourth to colorless sulfoxide formation. Mechanisms consistent with each term were proposed and analytical implications of the kinetic studies are discussed.     

Microwave spectrum and conformation of isopropyl fluoroformate

The microwave spectrum of isopropyl fluoroformate is characterized by intense a-type R-branch transitions from one conformational species. The rotational constants of the ground state, A₀ = 4967.0(8) MHz, B₀ = 1704.69(2) MHz, C₀ = 1468.86(1) MHz and κ = −0.8651(2) are consistent with a τ₁ (O=COC) = 0°, τ₂(COCH) ˜35° structure. This structure can be viewed as a combination of the two conformational species found in ethyl fluoroformate. Two vibrational satellites having rotational constants A₀ = 4963(5) MHz, B₀ = 1694.11(7) MHz. C₀ = 1471.43(4) MHz and A₀=4998(6) MHz, B₀ = 1705.21(7) MHz, C₀ = 1471.10(4) MHz have been assigned.     

Dynamic behaviour and X-ray analysis of chiral η-allylpalladium complexes. II

The DANTE technique and NOESY two-dimensional method have been employed to observe the isomerization of the chiral cationic complex [Pd(η³-CH₂CMeCH₂(P-P′)]⁺ (1a), where P-P′ = the chiral chelating ligand (S)(N-diphenylphosphino)(2-diphenylphosphinoxymethyl)pyrrolidine. The rate constant was found to be 0.5 s⁻¹ in CHCl₃ at 295 K and 1.50 s⁻¹ in the presence of added free ligand. In the latter case the epimerization proceeds by a π-σ-π mechanism via the intermediacy of a primary η¹-allylpalladium complex. Although the intermediate was not detected, the NMR findings reveal that it has the allylic terminus η¹-bonded to palladium. The structure of 1a in its PF₆⁻ salt has been determined. The compound crystallizes in the orthorhombic space group P2₁2₁2₁ with a 10.029(4) b 19.203(8) c 36.115(6) Å, Z = 8, R = 0.0572 and R_w = 0.0712 for 3716 observed reflections with I > 3σ(I).