Honeycomb-like manganese oxide nanospheres for redox supercapacitors

Honeycomb-like MnO₂ nanospheres were synthesized using stainless steel substrates by a facile chemical bath deposition method. The obtained nanospheres were about 200–400 nm in diameter and consisted of porous ultrathin nanosheets. Honeycomb-like MnO₂ nanospheres exhibited a high specific capacitance of 240 F g^?1 and 87.1% capacitance retention after 1000 cycles at a current density of 0.5 A g^?1. These remarkable electrochemical results imply great potential for applications of the honeycomb-like MnO₂ nanospheres in supercapacitors.     

Synthesis and characterization of stable Co and Cd doped nickel hydroxide nanoparticles for electrochemical applications

The present paper describes the physical-chemical characterization and electrochemical behavior of a new nanomaterial formed by the addition of cadmium and cobalt atoms into the structure of nickel hydroxide nanoparticles, these ones synthesized by an easy sonochemical method. Particles of about 5nm diameter were obtained and characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction and Raman spectroscopy. Different nickel hydroxide nanoparticles were immobilized onto transparent conducting substrates by using electrostatic layer-by-layer providing thin films at the nanoscale and the electrochemical behavior was investigated. The formation of a mixed hydroxide was corroborated by observation of very interesting properties as redox potential shifting to less positive potentials and high stability when submitted to long electrochemical cycling or high times of ultrasonic synthesis, suggesting practical applications.     

Effect of additives on the structure and electrochemical performance of mesoporous nickel hydroxide

Nickel hydroxide mesoporous structures are synthesized by a simple method in the presence of different additives (oxalic acid, aminoacetic acid, and sulfosalicylic acid). Structural characterizations reveal that the additives can affect the crystal structure, increase the specific surface area, and reduce the pore size of the products. The electrochemical properties of the synthesized Ni(OH)₂ samples are dependent on their crystal phase, surface area, and pore size distribution. Mesoporous β-Ni(OH)₂ with poor crystallinity shows high specific capacitances at different current densities and excellent cycling ability. A highest specific capacitance of 1,693 F?g^?1 can be achieved at a scan rate of 5 mV?s^?1. The results suggest its potential application in electrochemical supercapacitors.     

Effect of synthesis temperature on the phase structure and electrochemical performance of nickel hydroxide

Nickel hydroxide powder is prepared by chemical precipitation method, and the effect of synthesis temperature on the phase structure and electrochemical performances of nickel hydroxide is investigated. The phase structure is characterized by X-ray diffraction (XRD), and the electrochemical performances are characterized by cyclic voltammetry, electrochemical impedance spectroscopy, and charge/discharge tests. The XRD results show that low temperatures (0–20 °C) induce the precipitation of badly crystallized nickel hydroxide while at high temperatures (40–60 °C) crystallized β-nickel hydroxide is formed. Electrochemical performance tests show that the nickel hydroxide synthesized at low temperature has better electrochemical reversibility, lower electrochemical reaction impedance, and higher discharge capacity than that of the nickel hydroxide synthesized at high temperature.     

MnO2-polypyrrole conducting polymer composite electrodes for electrochemical redox supercapacitors

Redox supercapacitors using electrochemically synthesised MnO₂-polypyrrole composite electrodes have been fabricated with different electrolytes, namely polymer electrolyte film (polyvinyl alcohol, PVA-H₃PO₄ aqueous blend), aprotic liquid electrolyte (LiClO₄-propylene carbonate, PC) and polymeric gel electrolyte [poly methyl methacrylate, (PMMA)-Ethylene carbonate (EC)-Propylene carbonate (PC)-NaClO₄]. The capacitors have been characterised using galvanostatic charge-discharge methods. The cell with aqueous PVA-H₃PO₄ shows non-capacitive behaviour owing to some reversible chemical reaction of MnO₂ with water while the MnO₂-polypyrrole composite is found to be a suitable electrode material for redox supercapacitors with aprotic (non-aqueous) electrolytes. The solid state supercapacitor based on MnO₂-polypyrrole composite electrodes with gel electrolyte gives stable values of capacitance of 10.0–18.0 mF cm⁻² for different discharge current densities.     

Synthesis,characterization, and electrochemical performances of alpha nickel hydroxide by coprecipitating Sn2+

Ionics - Sn-substituted α-Ni(OH)2 for Ni-MH battery is prepared by supersonic coprecipitating method, using NiSO4 as nickel ion source and SnSO4 as doping material. The crystal structure and...     

Novel magnetic vortex nanorings/nanodiscs: Synthesis and theranostic applications

Recent discoveries in the synthesis and applications of magnetic vortex nanorings/nanodiscs in theranostic applications are reviewed. First, the principles of nanomagnetism and magnetic vortex are introduced. Second, methods for producing magnetic vortex nanorings/nanodiscs are presented. Finally, theranostic applications of magnetic vortex nanorings/nanodiscs are addressed.     

Synthesis and growth of hematite nanodiscs through a facile hydrothermal approach

This study reports a facile hydrothermal method for the synthesis of monodispersed hematite (α-Fe₂O₃) nanodiscs under mild conditions. The method has features such as no use of surfactants, no toxic precursors, and no requirements of high-temperature decomposition of iron precursors in non-polar solvents. By this method, α-Fe₂O₃ nanodiscs were achieved with diameter of 50 ± 10 nm and thickness of ~6.5 nm by the hydrolysis of ferric chloride. The particle characteristics (e.g., shape, size, and distribution) and functional properties (e.g., magnetic and catalytic properties) were investigated by various advanced techniques, including TEM, AFM, XRD, BET, and SQUID. Such nanodiscs were proved to show unique magnetic properties, i.e., superparamagnetic property at a low temperature (e.g., 20 K) but ferromagnetic property at a room temperature (~300 K). They also exhibit low-temperature (<623 K) catalytic activity in CO oxidation because of extremely clean surfaces due to non-involvement of surfactants, compared with those spheres and ellipsoids capped by PVP molecules.     

Structure and electrochemical performance of Y(III) and Al(III) codoped amorphous nickel hydroxide

Amorphous nickel hydroxide codoped with rare earths Y(III) and Al(III) has been synthesized by the chemical precipitation method combined with the rapid freezing technique. The microstructure and morphology of the prepared sample were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectra. The electrochemical performance of the sample was characterized by the charge/discharge test and cyclic voltammetry. The results show that this amorphous nickel hydroxide codoped with Y(III) and Al(III) has many structural defects and therefore results in a relatively high specific capacity (351.83 mA h g^?1 at a charge/discharge rate of 0.2 C) and good electrochemical reversibility.     

Preparation and characterization of nickel hydroxide microspheres assembled by nanoribbons

Abstract  

This article describes a facile green strategy for preparing the Ni(OH)₂ microsphere assembled by nanoribbons by the template of the squama inner coat of onion at mild condition. The method is simple and effective. The results of SEM show the products are Ni(OH)₂ microspheres with diameters in the range of 500–2,500 nm. The results of TEM show the microsphere is assembly by nanoribbons, with thickness in the range of 30–50 nm. The products were characterized by powder X-ray diffraction, IR, and thermogravimetric analysis. A possible formation mechanism was also proposed.     

Synthesis of core-shell carbon sphere@nickel oxide composites and their application for supercapacitors

Herein, core-shell carbon sphere@nickel oxide (Cs@NiO) composites were fabricated by a facile hydrothermal method followed by calcination. The resultant Cs@NiO composites are composed of randomly distributed NiO nanoneedles coated on carbon sphere surfaces, which exhibit the rambutan-like structure. As electrode materials for supercapacitor, the core-shell Cs@NiO delivers a high specific capacitance of 555 F/g at the current density of 1 A/g, and an outstanding rate capability of about 85.6% capacity retention from 1 to 10 A/g. Meanwhile, the capacitance degradation is only 5% after 1000 continuous charge-discharge cycles with a current density of 10 A/g. These excellent electrochemical performances can be attributed to the enhanced electronic conductivity, the improved surface activity and the facilitated charge transportation during charging and discharging process, which are caused by the introduction of carbon sphere and the appropriate structure, respectively.     

Electrochromic and electrochemical properties of amorphous porous nickel hydroxide thin films

Nickel hydroxide films were prepared using the chemical bath deposition (CBD) technique. The amorphous nature of the films was confirmed by X-ray diffraction measurements. X-ray photoelectron spectroscopy (XPS) measurements showed that the films exhibited nickel hydroxide nature. The porosity of the films was studied using optical measurements. The electrochromic properties of the porous nickel hydroxide layers were investigated, using cyclic voltammetry, chronoamperometry, in situ transmittance, UV-vis spectroscopy, and impedance spectroscopy. The change in the optical density (ΔOD) was found to be 0.79 for the as-deposited nickel hydroxide films, whereas it is 0.53 and 0.50 for the films annealed at 150 °C and 200 °C, respectively. The in situ transmittance and chronoamperometry curves revealed that the annealed films had a very fast colouration (t_c < 290 ms) and decolouration (t_b < 130 ms). The measured colouration efficiencies range between 30 and 40 cm²/C. The impedance measurements revealed the faster colouration and good electrochromic properties for the annealed nickel hydroxide films.     

Electrochemical redox supercapacitors using PVdF-HFP based gel electrolytes and polypyrrole as conducting polymer electrode

Electrochemical redox supercapacitors have been fabricated using polymeric gel electrolytes polyvinylidene fluoride co-hexafluoropropylene (PVdF-HFP)–ethylene carbonate (EC)–propylene carbonate (PC)–MClO₄: M = Li, Na, (C₂H₅)₄N and electrochemically deposited polypyrrole as conducting polymer electrode. The performance of the capacitors have been characterized using a.c impedance spectroscopy, cyclic linear sweep voltammetry and galvanostatic charge–discharge techniques. The capacitors shows larger values of overall capacitance of about 14–25 mF cm^− 2 (equivalent to a single electrode specific capacitance of 78–137 F g^− 1 of polypyrrole), which corresponds to the energy density of 11–19 W h kg^− 1 and power density of 0.22–0.44 kW kg^− 1. The values of capacitance have been found to be almost stable up to 5000 cycles and even more. A comparison indicates that the capacitive behaviour and the capacitance values are not much affected with the size of cations of the salts incorporated in gel electrolytes, rather predominant role of anions is possible at the electrode–electrolyte interfaces. Furthermore the coulombic efficiencies of all the cells were found to be nearly 100% that is comparable to the liquid electrolytes based capacitors.     

An optical study of the deposition and conversion of nickel hydroxide films

The deposition and conversion of nickel hydroxide films on platinum in nickel nitrate solution is studied using a self-nulling ellipsometer. The cathodically deposited hydroxide film, α-Ni(OH)₂, has a refractive index of 1.502 — 0.0i. When anodically oxidized, the α-Ni(OH)₂ converts to a film of γ-NiOOH of index 1.502 — 0.27i Alternate oxidation and reduction causes the hydroxide film to convert to β-Ni(OH)₂ with refractive index 1.43 — 0.0i. Oxidation of the β-Ni(OH)₂ produces a film of β-NiOOH with refractive index 1.43 — 0.165i. The conversion processes take place uniformly throughout the film with the film thickness increasing by a factor of 1.43 on oxidation. When further deposition of α-Ni(OH)₂ is attempted on a layer of α-Ni(OH)₂, the layer of β-Ni(OH)₂ converts to α-Ni(OH)₂ before deposition begins.     

Synthesis and characterization of nitrogen-doped graphene hollow spheres as electrode material for supercapacitors

Recently, the rapid development of graphene industry in the world, especially in China, provides more opportunities for the further extension of the application field of graphene-based materials. Graphene has also been considered as a promising candidate for use in supercapacitors. Here, nitrogen-doped graphene hollow spheres (NGHS) have been successfully synthesized by using industrialized and pre-processed graphene oxide (GO) as raw material, SiO₂ spheres as hard templates, and urea as reducing-doping agents. The results demonstrate that the content and pretreatment of GO sheets have important effect on the uniform spherical morphologies of the obtained samples. Industrialized GO and low-cost urea are used to prepare graphene hollow spheres, which can be a promising route to achieve mass production of NGHS. The obtained NGHS have a cavity of about 270 nm, specific surface area of 402.9 m² g^?1, ultrathin porous shells of 2.8 nm, and nitrogen content of 6.9 at.%. As electrode material for supercapacitors, the NGHS exhibit a specific capacitance of 159 F g^?1 at a current density of 1 A g^?1 in 6 M KOH aqueous electrolyte. Moreover, the NGHS exhibit superior cycling stability with 99.24% capacitive retention after 5000 charge/discharge cycles at a current density of 5 A g^?1.     

Synthesis of graphene/nickel oxide composite with improved electrochemical performance in capacitors

A novel reduced graphene oxide/NiO nanosheet composite (r-GO/NiO) (ca. 75 % NiO in weight) was synthesized by a facile two-step method, where the NiO nanosheets were decorated with some voids. The composite was characterized by using X-ray diffraction, transmission electron microscopy, thermal gravimetric analysis, and Raman spectroscopy. The electrochemical properties of the composite were investigated by cyclic voltammetry, galvanostatic charge, and discharge measurements. The results show that the r-GO/NiO composite exhibits a stable average specific capacitance of ca. 1,139 F g^?1 (at 0.5 A g^?1) during 1,000 charge–discharge cycles, suggesting that the r-GO/NiO composite is a potential supercapacitor material. The main correlation between the electrochemical performance and the structure of the materials was studied, and the formation process of the composite was also discussed.     

Longitudinal unzipping of carbon nanotubes and their electrochemical performance in supercapacitors

The capacitive properties of graphene nanoribbons (GNRs) with different reduction levels were investigated. GNRs have been synthesized through thermal reduction of oxidized GNRs in the temperature range 100–400 °C. Oxidized GNRs were synthesized by longitudinal unzipping of multi-walled carbon nanotubes (MWCNTs) by means of chemical treatments. Scanning electron microscopy and transmission electron microscopy observations showed, that the efficient tube unzipping yielded improved effective surface area without any tube annihilation by the unzipping process of MWCNTs. Electrochemical studies indicated that through unzipping of MWCNTs, specific capacitance increased from 8 to 28 F g⁻¹ at discharge current density of 0.5 A g⁻¹, confirming increased active surface area and increased defect density in the MWCNTs surface. Unzipping of MWCNTs resulted in decreased rate capability of the electrode because of low electrical conductivity due to oxidization during the unzipping process. Thermal reduction of unzipped sample affected both specific capacitance and rate capability of electrodes. The highest specific capacitance of 62 F g⁻¹ at discharge current density of 0.5 A g⁻¹ was obtained for the sample unzipped and thermally annealed at about 150 °C. The amount of oxygen-containing groups was shown to be an important factor influencing the performance of the GNRs. These results make unzipped MWCNTs promising electrode materials for supercapacitor applications.     

Synthesis and properties of mecoprop-intercalated layered double hydroxide

This study carried out to elucidate the synthesis of MCPP-LDH hybrid, release pattern of MCPP from MCPP-LDH hybrid and their properties. MCPP-LDH hybrid was synthesized from MCPP and Mg-Al complex. Release pattern of MCPP from MCPP-LDH hybrid was slower in distilled water and soil solution but it was slower in distilled water than soil solution. MCPP-LDH hybrid has shown more stable condition than form of LDH in thermal and acidic condition. Therefore, MCPP-LDH hybrid would lead as functional and benign pesticide to minimize the harmful effects on soil environment by bulk herbicides.