Determination of polynuclear aromatic hydrocarbons in water samples using large volume on-column injection capillary gas chromatography

An automated large volume on-column injection technique for capillary gas chromatography (GC) with solvent divert and heated retention gap technology has been utilized to determine polynuclear aromatic hydrocarbons (PAHs) in samples of industrial plant process water. Injecting large sample volumes on-column enabled the sample preparation procedure to be simplified and provided a fast, labor-saving technique for screening water samples. Diverting approximately 95% of the solvent away from the analytical column and the detector enabled chromatography to reflect classical capillary loading and detector conditions. Simplifications include significant reduction of sample and eluent volumes used during extraction and the elimination of Kuderna-Danish evaporative concentration. System performance, such as linearity and limit of detection, were evaluated for selected PAHs. Spiked water samples were prepared in the lower μ/L range to determine extraction efficiency. Results are compared with those obtained by a reputable contract laboratory following EPA Method 625.     

Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

Polymer analysis using pyrolysis-GC-FTIR-MS and GC-AED

Volatile pyrolysates of a methyl methacrylate-butadiene-styrene copolymer (MBS) have been analyzed using a capillary gas chromatograph equipped with a Fourier transform infrared detector in tandem with a mass selective detector, and a gas chromatograph-atomic emission detector system. Among the volatile compounds observed were monomers used for synthesis of the polymer. Numerous oligomers of higher boiling point were also found; identification of these could be used to give structural information about the parent polymer. Combining information from these techniques was found to be extremely useful for the analysis of polymer pyrolysis products. In characterizing each compound it was found particularly helpful to juxtapose feature-specific chromatograms (e.g., single ion monitoring from the mass-selective detector and the selected wavelength chromatography from the infrared detector).     

A simple multisensor detector based on tin dioxide in capillary gas chromatography

The use of an array of metal oxide film sensors as a detector for volatile organic compounds in capillary gas chromatography is described. The results of determination of the sensitivity, response time, and linearity range of the analytical signals from sensors are presented; these parameters are compared with similar characteristics of commercial gas chromatographic detectors. An approach is proposed to the identification of organic compounds by the shape and relative size of responses of individual sensors. It is demonstrated that the multisensor detector is applicable to solving typical analytical problems of the quantitative analysis of multicomponent mixtures.     

Microwave-induced plasma emission spectrophotometer combined with a photodiode array monitor for capillary column gas chromatography

A microwave-induced plasma emission spectrophotometric detector (MIPD) was used as an element-specific detector for capillary column gas chromatography. The atmospheric pressure microwave helium plasma generated with an original device called a SURFATRON was used as an atomization and excitation source. Combining a photodiode array spectrophotometer with the above system made the emission spectrophotometric detector very powerful. A wide range of spectra could be instantly monitored without any mechanical device. However, the spectrum of atmospheric helium emission plasma was complicated by the presence of air around the plasma discharge. An on-line background correction scheme was developed to handle such complicated spectra.     

GC/MS分析羰基化产物萘普生甲酯

α－（6-甲氧基-2-萘基）-乙醇在催化剂的作用下,与甲醇和CO发生羰基化反应,一步生成α－（6-甲氧基-2-萘基）丙酸甲酯（萘晋生申酯）。应用气相色谱-质谱联用技术,对这个反应过程中生成的各种化合物进行了分析,获得两个中间产物6-甲氧基萘乙烯和1-甲氧基-1-（6'-甲氧基-2'-萘基）乙烷的GC／MS数据资料,为推测该催化反应机理提供了可靠的依据。     

Determination of artemisinin and artemisinic acid by capillary and packed supercritical fluid chromatography

Artemisinin (an antimalarial compound) and its bioprecursor artemisinic acid, present in the plant Atemisia annua L., were analyzed by supercritical fluid chromatography (SFS) using capillary and packed columns, coupled respectively with a flame ionization detector (FID) and an evaporative light scattering detector (ELSD). Both methods were optimized and validated with columns of different polarity in order to separate artemisinin and artemisinic acid. Analytical results were comparable, but the paced SFC-ELSD method was faster. Indeed, artemisinin and artemisinic acid were separated with an aminopropyl silica column in less than 8 minutes instead of about 25 minutes by capillary SFS. Contrary to conventional gas and liquid chromatography coupled to an UV-visible detector, SFS methods determined both compounds directly, without degradation and/or derivatization in the concentration range expected in the plant material. Results obtained on plant extracts by capillary SFS-FID and packed SFS-ELSD were confirmed by GC-MS.     

高效毛细管电泳电化学检测器的研制

本文提出了一种用于高效毛细管电泳的新型安培电化学检测器设计，使用Ｎａｆｉｏｎ溶液制作的ＨＰＣＥ／ＥＤ接口，可有效地隔开两化学系统的干扰，且不引入附加体积，经对有机酚类化合物的胶束电动毛细管色谱分离与电化学检测知，该系统性能优良，对对苯二酚的检出限为３０ａｍｏｌ。     

Enzyme activity determination by radio gas chromatography on capillary columns

Androgen 5α-reductase from the foreskin of 48 boys in prepubertal age was analyzed by evaluation of the apparent K_m-and V_max- values after tissue incubation. Reaction rates were calculated after determination of specific radioactivity of distinct metabolites, by comparison to the radioactivity of the precursor. Reaction products were separated by radio gas chromatography on capillary columns. The chromatography system was based on multicolumn equipment with column switching facilities and a variable splitter at the outlet of the separation column. A radioactivity monitor (gas proportional counter) was used for measurement of radioactivity in the column effluents. An electron capture detector was used for mass detection of steroid acyl derivatives.     

Determination of Arene Oxides by a Gas Chromatography-Mass Spectrometry System: Thermal Reactions of 9, 10-Epoxy-9, 10-Dihydrophenanthrene

Abstract

An analytical technique involving the use of a gas chromatograph coupled to a mass spectrometer-computer system, has been developed to detect arene oxides using 9, 10-epoxy-9, 10-dihydro-phenanthrene as a model substrate. The gas chromatograph was equipped with a hydrogen flame ionization detector and a high-resolution glass capillary column coated with SE-52 (methyl phenyl silicone). Two simultaneous thermal reactions (deoxygenation and rearrangement) of 9, 10-epoxy-9, 10-dihydrophenanthrene in the gas chromatograph were observed. The method developed was compared with a conventional method utilizing a packed glass column. Under the latter conditions neither thermal reactions nor 9, 10-epoxy-9, 10-dihydrophenanthrene were detected. The identification of the reactant and products was achieved by comparison of retention times and mass spectral fragmentation patterns obtained from authentic samples.     

Metal selective flame ionization detection after supercritical fluid chromatography

This work describes the construction and operation of a flame ionization detector for the selective detection of metal-containing compounds after capillary supercritical fluid chromatography. Using optimal conditions for achieving metal sensitive flame ionization responses which have been established for the detector after capillary gas chromatography, initial evaluation of the detector after SFC proved promising. Like the carbon sensitive FID, it appears that the metal sensitive FID is compatible with SFC when pure carbon dioxide is used as the mobile phase. Response characteristics were found to be similar to those observed when the detector is used in gas chromatography.     

Glass capillary gas chromatography with simultaneous flame ionization (FID) and Hall® element-specific (HECD) detection

Two glass capillary gas chromatographic systems were equipped with inert effluent splitters which allowed simultaneous data acquisition using nonspecific and element-specific detectors. Simultaneous detection was achieved using the nonspecific flame ionization detector (FID) and the Hall^® electrolytic conductivity detector (HECD) operated in either the sulfur-or the nitrogen-specific mode. Typical application of the simultaneous detection system as applied to analysis of petroleum residues is briefly described. The Hall electrolytic conductivity detector can be made element specific for halogen-, sulfur-, or nitrogen-containing compounds. Simultaneous detection enhances the information yield from a single sample injection and proves to be a powerful complementary technique when used with computerized gas chromatography/mass spectrometry.     

Rapid analysis of hydrocarbons and inert gases by a multidimensional gas chromatograph

A combination of a pressure switching system with multiple columns and photoionization detectors makes possible rapid analysis of a mixture of inorganic gases and hydrocarbons. Hydrocarbons are separated by a narrow bore capillary column. An alumina PLOT column is used for the separation of lower molecular weight hydrocarbons, especially C4 isomers, while a combination of a micro-packed column with Porapak N and a PLOT capillary column with Molecular Sieve 5A is used for the fast separation of inorganic gases. A photoionization detector is a powerful additional tool for organic gas analysis.     

Study of an electroosmotic pump for liquid delivery and its application in capillary column liquid chromatography

A packed-bed electroosmotic pump (EOP) was constructed and evaluated. The EOP consisted of three capillary columns packed in parallel, a gas-releasing device, Pt electrodes and a high-voltage power supply. The EOP could generate output pressure above 5.0 MPa and constant flow rate in the range of nl/min to a few microl/min for pure water, pure methanol, 2 mM potassium dihydrogenphosphate buffer, the buffer-methanol mixture and the pure water-methanol mixture at applied potentials less than 20 kV. The composition of solvent before/after pumping was quantitatively determined by using a gas chromatograph equipped with both flame ionization detector and thermal conductivity detector. It was found that there were no apparent changes in composition and relative concentrations after pumping process for a methanol-ethanol-acetonitrile mixture and a methanol-water mixture. Theoretical aspect of the EOP was discussed in detail. An capillary HPLC system consisting of the EOP, an injection valve, a 15 cm x 320 microm i.d., 5 microm Spherigel C18 stainless steel analytical column, and an on-column UV detector was connected to evaluate the performance of the EOP. A comparative study was also carried out with a mechanical capillary HPLC pump on the same system. The results demonstrated that the reproducibility of flow rate and the pulsation-free flow property of the EOP are superior to that of mechanical pump in capillary HPLC application.     

Features of a micro-gas chromatograph equipped with enrichment device and microchip plasma emission detection (muPED) for air monitoring

A field portable gas chromatograph (GC) was constructed allowing the enrichment of organic solutes from air samples on a miniaturized chemical trap and the subsequent gas chromatographic analysis on a resistively heated capillary column. The heart of the system is an integrated chip-based plasma emission detector (muPED). As a non-selective detector, the sensitivity is similar to that of a flame ionization detector (FID). The detector shows good selectivity for phosphorus, sulfur and chlorine-containing compounds with relative selectivities of ca. 5 x 10(5) gP gC(-1), 50 gS gC(-1) and 10(2) gCl gC(-1). The lifetime of the plasma chip under air monitoring conditions exceeded 3000 analyses.     

New approaches on gas phase molecular absorption spectrometry detection in gas chromatography

A hyphenated technique for coupling a spectrophotometric detector to a gas chromatograph with a packed column is described. The packed column was connected directly to the flow cell (path length 1 cm) which was placed in a UV-visible molecular absorption spectrophotometer with diode array detector. This detection system was employed for separating and determining benzene, toluene, 1,4-xylene, 1,2-xylene and mesitylene. Molecular absorption spectra of all the separated compounds have also been obtained. A new possibility for coupling capillary gas chromatography and gas phase molecular absorption spectrometry is currently being tested. In this new case, two fibre optics are used and the measurement is performed in the capillary column.     

Radio-gas chromatography on wide-bore capillary columns equipped with a synchronized accumulating radioisotope detector

A gas chromatographic system with wide-bore capillary columns and synchronized accumulating radioisotope detector (SARD) was developed. A direct injection method and constant-flow regulation were applied. The performance of wide-bore capillary columns was good and the correspondence of the resolution obtained with SARD and that with mass detection was excellent. It was proved that the apparatus could detect of the order of 1 pg of 3H-labelled substances (3.7 TBq/mmol) and compete in terms of sensitivity with gas chromatography-mass spectrometry.     

New approaches on gas phase molecular absorption spectrometry detection in gas chromatography

A hyphenated technique for coupling a spectrophotometric detector to a gas chromatograph with a packed column is described. The packed column was connected directly to the flow cell (path length 1 cm) which was placed in a UV-visible molecular absorption spectrophotometer with diode array detector. This detection system was employed for separating and determining benzene, toluene, 1,4-xylene, 1,2-xylene and mesitylene. Molecular absorption spectra of all the separated compounds have also been obtained. A new possibility for coupling capillary gas chromatography and gas phase molecular absorption spectrometry is currently being tested. In this new case, two fibre optics are used and the measurement is performed in the capillary column.     

FID/TCD并联气相色谱法测定天然气水合物的气体组成

建立了一种氢火焰离子化检测器（FID）与热导检测器（TCD）并联检测的气相色谱分析技术。该方法一次进样,即可实现天然气水合物中C1~C6、CO2、H2S、O2+N2 16种气体成分的同时测定。实验优化了色谱柱、升温程序、柱流速、进样口温度、检测器温度、TCD参考气和尾吹气流速等仪器分析参数。在优化条件下,16种气体分子在实验浓度范围内线性关系良好,r2为0.999 03~0.999 98,方法检出限为0.000 3~0.046 mol/mol,相对标准偏差（n=6）为1.6%~5.0%。对祁连山冻土区、南海神狐海域、人工合成水合物样品的分析表明,该方法简便实用、灵敏可靠,可满足天然气水合物气体组成的分析要求。     

气相色谱-火焰光度法测定土壤中有机磷农药残留

建立了气相色谱-火焰光度(GC-FPD)分析土壤中敌敌畏、氧化乐果、二嗪农、乐果、甲基对硫磷、马拉硫磷、对硫磷、水胺硫磷、喹硫磷等9种有机磷农药残留量的方法。样品用丙酮-二氯甲烷(1:3)提取,浓缩、定容后用Hp-5MS(30m×0.25 mm×0.25μm)毛细管柱分离,FPD检测器检测。方法回收率在68.71%～110.39%之间;RSD在5.5%～11%之间;检出限在0.397～1.60μg/mL之间,方法可用于环境土壤样品中有机磷农药残留的测定。