X射线驻波方法研究半导体超薄异质外延层

利用双晶单色器和精密二圆衍射仪,在北京同步辐射装置建立了同步辐射X射线驻波实验技术,并用这一实验技术结合X射线衍射方法,研究了Si晶体中外延生长的起薄Ge原于层的微结构。实验结果表明,由于Ge原予的偏析,在Si晶体样品中形成了共格生长的GexSi1-x合金层,浓度平均值为x≈0.13;650℃退大会使Ge原予向表面扩散,Si晶体中的合金层消失,在晶体表面形成接近纯Ge的单原于层。     

GeSn合金的晶格常数对Vegard定律的偏离

在Si (001)衬底上, 以高质量的弛豫Ge薄膜作为缓冲层, 先后生长Sn组分x分别为2.5%, 5.2%和7.8%的完全应变的三层Ge_1-xSn_x合金薄膜. 在Si (001)衬底上直接生长了x分别为0.005, 0.016, 0.044, 0.070和0.155的五个弛豫Ge_1-xSn_x样品. 通过卢瑟福背散射谱、高分辨X射线衍射和X射线倒易空间图等方法测量了Ge_1-xSn_x合金的组分 与晶格常数. 实验得到的晶格常数相对Vegard定律具有较大的正偏离, 弯曲系数b=0.211 Å.     

Ge薄层异质结构的同步辐射X射线反射法研究

用X射线反射方法研究了分子束外延技术生长的Si中Ge薄层异质结构的Ge原子分布特性.根据X射线反射理论及Parratt数值计算方法对实验反射曲线的模拟,得到不同厚度的Ge薄层异质结构样品中Ge原子的深度分布为非对称指数形式:在靠近样品表面一侧的衰减长度为8埃,而在靠近样品衬底一侧的衰减长度为3埃,且分布形式与Ge原子层的厚度无关.讨论了不同结构参数(Ge原子薄层的深度、Ge原子分布范围、样品表面粗糙度、样品表面氧化层厚度等)对样品低角反射曲线的影响.     

同步辐射X射线掠入射衍射实验技术及应用

利用北京同步辐射装置漫散射实验站的五圆衍射仪,建立了掠入射X射线衍射实验方法.对Si表面生长的Ge/Si量子点及其在Si表层产生的应变进行了成功测量,表明此方法可以有效地提取表面层的微弱信号.实验结果表明,Ge/Si量子点的形成除了在Si衬底表层形成了晶格具有横向膨胀应变的区域之外,还在Si衬底中形成了具有横向压缩应变的区域.     

SiO2/Si衬底上石墨烯的制备与结构表征

在分子束外延(MBE)设备中,利用直接沉积C原子的方法在覆盖有SiO₂的Si衬底(SiO₂/Si)上生长石墨烯,并通过Raman光谱和近边X射线吸收精细结构谱等实验技术对不同衬底温度(500℃,600℃,700℃,900℃,1100℃,1200℃)生长的薄膜进行结构表征.实验结果表明,在衬底温度较低时生长的薄膜是无定形碳,在衬底温度高于700℃时薄膜具有石墨烯的特征,而且石墨烯的结晶质量随着衬底温度的升高而改善,但过高的衬底温度会使石墨烯质量降低.衬底温度为1100℃时结晶质量最好.衬底温度较低时C原子活性较低,难以形成有序的C-sp²六方环.而衬底温度过高时(1200℃),衬底表面部分SiO₂分解,C原子与表面的Si原子或者O原子结合而阻止石墨烯的形成,并产生表面缺陷导致石墨烯结晶变差.     

Si缓冲层的生长温度对SiGe组分、结构的影响

利用同步辐射X射线高分辨衍射、掠入射表面衍射、原子力显微镜、电子显微镜等手段研究了SiGe外延层的生长质量、组分与作为缓冲层Si的生长温度之间的关系. 研究表明, 在外延薄膜中Ge的含量为32±2%; 当Si缓冲层生长温度在400—500\textcelsius范围内, SiGe外延层质量高, 没有生长位错出现. X射线反射及原子力显微镜则显示对应最光滑的SiGe外延层表面的Si缓冲层的生长温度为450\textcelsius, 相应的表面粗糙度仅为大约15\AA.     

Si1-xGex合金半导体中CiCs和CiOi缺陷随Ge含量的变化

采用从头计算(ab initio)的方法对Si和Si_1-xGe_x合金半导体材料中C_iC_s缺陷的性质进行探讨，同时也对比调查了C_iO_i缺陷在Si和Si_1-xGe_x合金中的性质. 在不同Ge含量的Si_1-xGe_{x相似文献}   

Ge薄层异质结构的同步辐射X射线反射法研究

用X射线反射方法研究了分子束外延技术生长的Si中Ge薄层异质结构的Ge原子分布特性．根据X射线反射理论及Parratt数值计算方法对实验反射曲线的模拟,得到不同厚度的Ge薄层异质结构样品中Ge原子的深度分布为非对称指数形式：在靠近样品表面一侧的衰减长度为8埃,而在靠近样品衬底一侧的衰减长度为3埃,且分布形式与Ge原子层的厚度无关。讨论了不同结构参数(Ge原子薄层的深度、Ce原子分布范围、样品表面粗糙度、样品表面氧化层厚度等)对样品低角反射曲线的影响．     

Si/Gen/Si(001)异质结薄膜的掠入射荧光X射线吸收精细结构研究

利用掠入射荧光X射线吸收精细结构(XAFS)方法研究了在400℃的温度下分子束外延生长的Si/Gen/Si(001)异质结薄膜(n=1,2,4和8个原子层)中Ge原子的局域环境结构.结果表明,在1至2个Ge原子层(ML)生长厚度的异质结薄膜中,Ge原子的第一近邻配位主要是Si原子.随着Ge原子层厚度增加到4 ML,Ge原子的最近邻配位壳层中的Ge-Ge配位的平均配位数增加到1.3.当Ge原子层厚度增加到8 ML时,第一配位壳层中的Ge-Ge配位占的比例只有55%.这表明在400℃的生长条件下,Ge原子有很强的迁移到Si覆盖层的能力.随着Ge层厚度从1增加到2,4和8 ML,Ge原子迁移到Si覆盖层的量由0.5 ML分别增加到1.5,2.0和3.0 ML.认为在覆盖Si过程中Ge原子的迁移主要是通过产生Ge原子表面偏析来降低表面能和Ge层的应变能.     

Pd/W/Si(111)双层膜界面X射线光电子能谱与俄歇电子能谱研究

利用X射线衍射（XRD），X射线光电子能谱（XPS）和俄歇电子能谱（AES）对Pd/W/Si（111）界面进行了研究。实验结果表明，当系统作低温退火时，受W膜的阻挡，未生成硅化物，但Pd/W界面和W/Si（111）界面均有互扩散。升高退火温度，Pd－W原子在Si衬底上形成互溶体，Pd原子已穿过W阻挡层而到达W/Si（111）界面处，随着退火温度的继续升高，首先在W/Si（111）界面处生成PdSi_x,WSi_x也随之生成，这样就形成Pd-W原子分布的“反转”，在薄     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.     

A stereo matching algorithm using multi-peak candidate matches and geometric constraints

Gray cross correlation matching technique is adopted to extract candidate matches with gray cross correla- tion coefficients less than some certain range of maximal correlation coefficient called multi-peak candidate matches. Multi-peak candidates are extracted corresponding to three closest feature points at first. The corresponding multi-peak candidate matches are used to construct the model polygon. Correspondence is determined based on the local geometric relations between the three feature points and the multi-peak candidates. The disparity test and the global consistency checkout are applied to eliminate the remaining ambiguous matches that are not removed by the local geometric relational test. Experimental results show that the proposed algorithm is feasible and accurate.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Optical Pulse Compression Schemes That Use Nonlinear Bragg Gratings

Nonlinear optical pulse compression of picosecond pulses typically requires long lengths of optical fiber and multiple components. Periodic structures, such as fiber Bragg gratings, are highly dispersive at wavelengths outside of the photonic bandgap. This implies that such gratings can be used as very short all-fiber compressors. In this paper a number of such compression schemes are reviewed involving uniform and nonuniform fiber Bragg gratings, relying on both soliton and nonsoliton compression principles. Experimental results supporting the corresponding underlying theory are also presented. Finally, an extension of one of the compression schemes is shown, which allows the generation of adjustable high-repetition rate soliton trains.