Syntheses of CuO nanostructures in ionic liquids

A simple and efficient approach is developed to fabricate single-crystalline CuO nanostructures through an ionic liquid assisted one-step low-temperature solid-state route.Both nanoparticles(5 nm in size)and nanorods(5-10 nm in diameter and 50-100 nm in length)of monoclinic CuO were obtained. These synthesized CuO nanostructures were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),selected area electron diffraction(SAED),X-ray photoelectron spectros- copy(XPS),energy dispersive spectroscopy(EDS)and nitrogen adsorption analysis.The morpholo- gies of the nanostructures can be controlled by tuning the amount of NaOH and ionic liquids.The growth mechanism of CuO nanostructures is investigated.     

Double-layer in ionic liquids: paradigm change?

Applications of ionic liquids at electrified interfaces to energy-storage systems, electrowetting devices, or nanojunction gating media cannot proceed without a deep understanding of the structure and properties of the interfacial double layer. This article provides a detailed critique of the present work on this problem. It promotes the point of view that future considerations of ionic liquids should be based on the modern statistical mechanics of dense Coulomb systems, or density-functional theory, rather than classical electrochemical theories which hinge on a dilute-solution approximation. The article will, however, contain more questions than answers. To trigger the discussion, it starts with a simplified original result. A new analytical formula is derived to rationalize the potential dependence of double-layer capacitance at a planar metal-ionic liquid interface. The theory behind it has a mean-field character, based on the Poisson-Boltzmann lattice-gas model, with a modification to account for the finite volume occupied by ions. When the volume of liquid excluded by the ions is taken to be zero (that is, if ions are extremely sparsely packed in the liquid), the expression reduces to the nonlinear Gouy-Chapman law, the canonical result typically used to describe the potential dependence of capacitance in electrochemical double layers. If ionic volume exclusion takes more realistic values, the formula shows that capacitance-potential curves for an ionic liquid may differ dramatically from the Gouy-Chapman law. Capacitance has a maximum close to the potential of zero charge, rather than the familiar minimum. At large potenials, capacitance decreases with the square root of potential, rather than increases exponentially. The reported formula does not take into account the specific adsorption of ions, which, if present, can complicate the analysis of experimental data. Since electrochemists use to think about the capacitance data in terms of the classical Gouy-Chapman theory, which, as we know, should be good only for electrolytes of moderate concentration, the question of which result is "better" arises. Experimental data are sparse, but a quick look at them suggests that the new formula seems to be closer to reality. Opinions here could, however, split. Indeed, a comparison with Monte Carlo simulations has shown that incorporation of restricted-volume effects in the mean-field theory of electrolyte solutions may give results that are worse than the simple Gouy-Chapman theory. Generally, should the simple mean-field theory work for such highly concentrated ionic systems, where the so-called ion-correlation effects must be strong? It may not, as it does not incorporate a possibility of charge-density oscillations. Somehow, to answer this question definitely, one should do further work. This could be based on density-functional theory (and possibly not on what is referred to as local density approximation but rather "weighted density approximation"), field theory methods for the account of fluctuations in the calculation of partition function, heuristic integral equation theory extended to the nonlinear response, systematic force-field computer simulations, and, most importantly, experiments with independently determined potentials of zero charge, as discussed in the paper.     

Photophysics and dynamics of a β-carboline analogue in room temperature ionic liquids

Room temperature ionic liquids are rapidly emerging as a new class of media that are ideally suited for various applications including carrying out chemical reactions. In the present article, we report the photophysics of a β-carboline analogue, namely, 3-acetyl-4-oxo-6,7-dihydro-12H indolo-[2,3-a] quinolizine (AODIQ), in three room temperature ionic liquids (RTILs), 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][MeSO(4)]), 1-butyl-3-methylimidazolium octyl sulfate ([BMIM][C(8)SO(4)]) and 1-ethyl-3-methylimidazolium methyl sulfate ([EMIM][MeSO(4)]). Out of these, [BMIM][C(8)SO(4)] is a typical RTIL that forms micellar aggregates above a critical micellar concentration (CMC). Steady state absorption, steady state and time resolved fluorescence techniques are used to probe the properties of these systems. The investigation reveals that the photophysics of AODIQ is modified significantly in the micelle-forming RTIL as compared to that in the other two. A comparative study with the fluorophore in [BMIM][C(8)SO(4)] and a conventional anionic surfactant of a similar hydrophobic chain length from the sodium-n-alkyl sulfate series, viz., sodium octyl sulfate (S(8)S), reveals that the fluorophore experiences a more constrained environment in the RTIL micelle as compared to the conventional anionic micelle.     

Calculations on ionic solvation—V The calculation of partition coefficients of ions

The solvation free energy of an ion in an organic solvent is calculated using our new electrostatic method, and is combined with the hydration free energy to yield the free energy of transfer of the ion from water to the organic solvent. It is shown that for the solvent systems water/1,2-dichloroethane, dichloromethane, chloroform, o-dichlorobenzene, chlorobenzene, and nitrobenzene there is good agreement between the calculated ΔG_t^o values and the free energies for partition of ions, ΔG_p^o = -RTlnP. For organic phases in which water is quite soluble, for example 1-octanol, 1-pentanol, isopentanol, ethyl acetate, and methylisobutylketone, the calculated ΔG_t^o values are always more positive than the observed partition values, ΔG_p^o. It is shown that this effect is due to hydration of the ions in the wet organic phase and by calculations on a solvation model in which an ion in the wet organic phase is surrounded by a layer of water of thickness 3.1 Å (the diameter of a water molecule) it is concluded that in the first group of solvents most ions are unhydrated in the wet organic phase; Cl⁻ is an exception and is partially hydrated. In the second group of wet solvents, all ions are at least partially hydrated, and Cl⁻ is hydrated by a layer of water that must be even thicker than the diameter of a water molecule.     

Purification or contamination? The effect of sorbents on ionic liquids

Commonly used for purification, alumina and silica are found to contaminate ionic liquids with particles; these particles cannot be removed easily and can have a non-negligible impact on the electrochemical, spectroscopic and physical properties of an ionic liquid, including its nucleation and crystallisation kinetics.     

Can marcus theory be applied to redox processes in ionic liquids? A comparative simulation study of dimethylimidazolium liquids and acetonitrile

Simulations of a model system of charged spherical ions in the ionic liquids dimethylimidazolium chloride, [dmim][Cl], dimethylimidazolium hexafluorophosphate, [dmim][PF6], and the polar liquid acetonitrile, MeCN, are used to investigate the applicability of Marcus theory to electrochemical half-cell redox processes in these liquids. The free energy curves for solvent fluctuations are found to be approximately parabolic and the Marcus solvent reorganization free energies and activation free energies are determined for six possible redox processes in each solvent. The similarities between the different types of solvent are striking and are attributed to the essentially long-range nature of the relevant interactions and the effectiveness of the screening of the ion potential. Nevertheless, molecular effects are seen in the variation of solvent screening potential with distances up to 2 nm.     

GC–MS study of thermochemical conversion of guaifenesin in the presence of 1-butyl-3-methylimidazolium-based ionic liquids

Research on Chemical Intermediates - Thermochemical conversion of guaifenesin was performed in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] ionic liquid at...     

Fabrication of ZnO nanorods in ionic liquids and their photoluminescent properties

A novel and simple approach is reported to fabricate uniform single-crystal ZnO nanorods in ionic liq-uids. The as-obtained ZnO nanorods have been characterized by XRD,TEM,HRTEM,SAED,XPS,EDXA,PL and UV-vis absorption spectra. The rod diameters of the nanostructures can be controlled by tuning the amount of sodium hydroxide in the synthesis. Photoluminescence results show that the nanos-tructural ZnO exhibits better optical properties than bulk ZnO does and interestingly,the smaller the rod diameters are,the better optical property 1D nanostructural ZnO exhibits. The possible growth mechanism of ZnO nanorods is also investigated.     

Efficient synthesis of β-chlorovinylketones from acetylene in chloroaluminate ionic liquids

A method for the Friedel-Crafts-type insertion reaction of acetylene with acid chlorides in chloroaluminate ionic liquids is presented. The use of ionic liquids not only serves to avoid the use of carbon tetrachloride or 1,2-dichloroethane but also suppresses side reactions, notably the polymerization of acetylene, which occurs in these chlorinated solvents. Consequently, the products can be isolated using a simpler purification procedure, giving a range of aromatic and aliphatic β-chlorovinyl ketones in high yield and purity.     

Photodegradation of EDTA using Fenton’s reagent: a pilot-scale study

The presence of ethylenediaminetetraacetic acid (EDTA) in decontamination wastes can cause complexation of cations resulting in interferences in their removal by various treatment processes, for example chemical precipitation, ion exchange, etc., and can negatively affect the quality of the final form of the waste. Advanced oxidation processes using ozone, H₂O₂, ultrasonics (US), ultraviolet (UV) light, Fenton’s reagent (Fe(II) + H₂O₂), alone or in combination, are regarded as possible methods of clean and ecologically safe remedial treatment for the degradation of organics. In this study, the development of a column photoreactor (15 L) and a shallow-tank photoreactor (100 L) was carried out at the Centralised Waste Management Facility, Kalpakkam, India. Pilot-scale (batch) studies of the photocatalytic degradation of EDTA (20,000 mg/L) using UV + Fenton’s reagent in these reactor geometries were attempted. The effect of the power of the UV radiation on the kinetics of photodegradation of EDTA (20,000 mg/L) was studied using the column photoreactor. The shallow-tank reactor was used to study the photodegradation of EDTA (20,000 mg/L) using UV radiation, visible radiation, and sunlight. The successful use of sunlight as a source of energy and its greater effectiveness than UV radiation in the treatment of EDTA are presented.     

The integration of quality management systems in testing laboratories: a practitioner’s report

Accreditation and Quality Assurance - When routine laboratories merge or are taken over by larger entities, their quality management systems usually need to be integrated. In many laboratories,...     

Synthesis of β-carbolines using microwave-assisted aza-Wittig methodology in ionic liquids

The improved preparation of 1-substituted-β-carbolines is reported using microwave-assisted aza-Wittig/electrocyclic ring-closure reaction with ionic liquids as solvent. In all cases an unprecedented N-methoxymethyl group (MOM) deprotection is observed.     

Highly efficient organic indolocarbazole dye in different acceptor units for optoelectronic applications—a first principle study

A series of novel organic dyes (ICZA1, ICZA2, ICZA3, ICZA4) with D-π-A structural configuration incorporating indolo[3,2,1-jk]carbazole moiety as donor (D) unit, thiophene as π-linker and 2-cyanoacrylic acid as acceptor unit were investigated using density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. Indolo[3,2,1-jk]carbazole-based D-π-A dyes composed of different acceptor groups were designed. By modulating acceptor unit, the efficiency of D-π-A dye-based dye-sensitized solar cells (DSSCs) can be further improved. In the present work, four novel push-pull organic dyes only differing in electron acceptor, have been designed based on the experimental literature value of IC-2. In order to further improve the light harvesting capability of indolo[3,2,1-jk]carbazole dyes, the acceptor influence on the dye performance were examined. The NLO property of the designed dye molecules can be derived as polarizability and hyperpolarizability. The calculated value of ICZA2 dye is the best candidate for NLO properties. Furthermore, the designed organic dyes exhibit good photovoltaic performance of charge transfer characteristics, driving force of electron injection, dye regeneration, global reactivity, and light harvesting efficiency (LHE). From the calculated value of ICZA4 dye, it has been identified as a good candidate for DSSCs applications. Finally, it is concluded that the both ICZA2 and ICZA4 dyes theoretically agrees well with the experimental value of IC-2 dye. Hence, the dyes ICZA2 and ICZA4 can serve as an excellent electron withdrawing groups for NLO and DSSCs applications.     

Can the absence of solvation of neutral reagents by ionic liquids be responsible for the high reactivity in base-assisted intramolecular nucleophilic substitutions in these solvents?

[reaction: see text] The kinetics of the rearrangement of the Z-phenylhydrazone of 3-benzoyl-5-phenyl-1,2,4-oxadiazole (1a) into the relevant 4-benzoylamino-2,5-diphenyl-1,2,3-triazole (2a) induced by amines have been studied in two room-temperature ionic liquids (IL-1, [BMIM][BF4] and IL-2, [BMIM][PF6]). The data collected show that the reaction occurs faster in ionic liquids than in other conventional solvents previously studied (both polar or apolar, protic or aprotic). Presumably, this could depend on their peculiar ability to minimize the strong substrate-solvent, amine-solvent and amine-amine interactions occurring in conventional solvents.     

Coordination of 1,10-phenanthroline and 2,2'-bipyridine to Li+ in different ionic liquids. How innocent are ionic liquids?

On the basis of (7)Li NMR measurements, we have made detailed studies on the influence of the ionic liquids [emim][NTf(2)], [emim][ClO(4)], and [emim][EtSO(4)] on the complexation of Li(+) by the bidentate N-donor ligands 2,2'-bipyridine (bipy) and 1,10-phenanthroline (phen). For each of the employed ionic liquids the NMR data implicate the formation of [Li(bipy)(2)](+) and [Li(phen)(2)](+), respectively. X-ray diffraction studies were performed to determine the coordination pattern in the solid state. In the case of [emim][ClO(4)] and [emim][EtSO(4)], crystal structures confirmed the NMR data, resulting in the complexes [Li(bipy)(2)ClO(4)] and [Li(phen)(2)EtSO(4)], respectively. On the contrary, the ionic liquid [emim][NTf(2)] generated the C(i) symmetric, dinuclear, supramolecular cluster [Li(bipy)(NTf(2))](2), where the individual Li(+) centers were found to be bridged by two [NTf(2)] anions. Density functional theory (DFT)-calculations lead to further information on the effect of stacking on the coordination geometry of the Li(+) centers.     

Efficient cyclodehydration of diethylene glycol in Brønsted acidic ionic liquids

Cyclodehydration of diethylene glycol using various Brønsted acidic ionic liquids as dual solvent-catalysts has been studied for the first time. Better results were obtained in the presence of 1-butyl-3-methylimidazolium hydrogen sulfate ([PSmim]HSO₄) compared with other Brønsted acidic ionic liquids. Effects of the reaction conditions such as reaction temperature, reaction time and molar ratio of ionic liquid to diethylene glycol have been investigated. High diethylene glycol conversion, 97.0 %, and high 1,4-dioxane selectivity, 89.3 %, were obtained in [PSmim]HSO₄ under optimum conditions. Hammett method was used to determine the acidity order of these ionic liquids and the results were consistent with the catalytic activities observed in the cyclodehydration reaction. Utilization of Brønsted acidic ionic liquids as dual solvent-catalysts has some advantages, e.g. high conversion of DEG, easy preparation and reuse of ionic liquids, avoiding toxic catalysts and solvents.     

Alkylsulfate-based ionic liquids in the liquid–liquid extraction of aromatic hydrocarbons

The (liquid + liquid) equilibrium data (LLE) for the extraction of toluene from heptane with different ionic liquids (ILs) based on the alkylsulfate anion (R-SO₄) was determined at T = 313.2 K and atmospheric pressure. The effect of more complex R-SO₄ anions on capacity of extraction and selectivity in the liquid–liquid extraction of toluene from heptane was studied. The ternary systems were formed by {heptane + toluene + 1,3-dimethylimidazolium methylsulfate ([mmim][CH₃SO₄]), 1-ethyl-3-methylimidazolium hydrogensulfate ([emim][HSO₄]), 1-ethyl-3-methylimidazolium methylsulfate ([emim][CH₃SO₄]), or 1-ethyl-3-methylimidazolium ethylsulfate ([emim][C₂H₅SO₄])}. The degree of quality of the experimental LLE data was ascertained by applying the Othmer–Tobias correlation. The phase diagrams for the ternary systems were plotted, and the tie lines correlated with the NRTL model compare satisfactorily with the experimental data.     

Acidic ionic liquids catalyst in homo and graft polymerization of ε-caprolactone

Biodegradable polycaprolactone was prepared by ring-opening polymerization in presence of ionic liquids as efficient, inexpensive, nontoxic, and easily handled acid catalysts. The resulting polymer exhibited good yield and inherent viscosity between 0.10 and 0.18 dL/g. The chemical structure of obtained polymer was verified by the ¹H-NMR and Fourier transform infrared spectroscopy (FT-IR) spectra. In continuation, the obtained polymer was applied to improve quality level and mechanical properties and also to reduce the hydrophilic properties of the starch, so the ring-opening polymerization of ε-caprolactone was investigated in the presence of starch hydroxyl groups as initiator and ionic liquid as catalyst. The obtained starch-grafted-polycaprolactone was verified by ¹H-NMR, FT-IR spectra, and field emission scanning electron microscopy analysis.     

Reactions of CH-acids with α,β-unsaturated aldehydes in ionic liquids

Metal carbonate-catalyzed reactions of CH-acids (diethyl malonate, ethyl acetoacetate, ethyl cyanoacetate, and ethyl 2-acetyl- and 2-ethoxycarbonyl-5,9-dimethyldeca-4,8-dienoates) with ,-unsaturated aldehydes (acrolein, crotonaldehyde, citral) were studied in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], and in a 1-butyl-3-methylimidazolium bromide ([bmim][Br]) — benzene system. The reactions with acrolein and crotonaldehyde afforded Michael addition products, those with citral resulted in Knoevenagel addition products. Sonication increased the yields of the Michael adducts. The ionic liquid [bmim][PF₆] can be recovered and repeatedly used in the reactions.     

Study of aromatic nucleophilic substitution with amines on nitrothiophenes in room-temperature ionic liquids: are the different effects on the behavior of para-like and ortho-like isomers on going from conventional solvents to room-temperature ionic liquids related to solvation effects?

The kinetics of the nucleophilic aromatic substitution of some 2-L-5-nitrothiophenes (para-like isomers) with three different amines (pyrrolidine, piperidine, and morpholine) were studied in three room-temperature ionic liquids ([bmim][BF4], [bmim][PF6], and [bm(2)im][BF4], where bmim = 1-butyl-3-methylimidazolium and bm(2)im = 1-butyl-2,3-dimethylimidazolium). To calculate thermodynamic parameters, a useful instrument to gain information concerning reagent-solvent interactions, the reaction was carried out over the temperature range 293-313 K. The reaction occurs faster in ionic liquids than in conventional solvents (methanol, benzene), a dependence of rate constants on amine concentration similar to that observed in methanol, suggesting a parallel behavior. The above reaction also was studied with 2-bromo-3-nitrothiophene, an ortho-like derivative able to give peculiar intramolecular interactions in the transition state, which are strongly affected by the reaction medium.