Photodynamic Therapy of Oligoethylene Glycol‐Dendronized Reduction‐Sensitive Porphyrins

Graphene oxide (GO ) and its functionalized derivatives have attracted increasing attention in medical treatment. Herein, a reduction sensitive PEI‐GO ‐SS ‐TPP was synthesized for photodynamic therapy. More than 80% porphyrin release was observed in the presence of 10 mmol•L⁻¹ DTT in one day. The confocal laser scanning microscopy confirmed that the cell uptake efficiency of PEI‐GO‐SS‐TPP was remarkably enhanced as compared to free porphyrin which was significantly dependent on incubation time. For photodynamic therapy, GSH‐OEt could effectively increase the photodynamic therapy efficiency of PEI‐GO ‐SS ‐TPP . Compared with free porphyrin, the toxicity from PEI‐GO ‐SS ‐TPP is much higher with a low IC₅₀ (2.1 µg/mL ) value. All results indicate that the PEI‐GO ‐SS ‐TPP PSs are promising for photodynamic therapy.     

Synthesis and Characterization of Aminoporphyrin‐End‐Functionalized Poly(N‐isopropylacrylamide) with Photodynamic and Thermoresponsive Effects

The novel aminoporphyrin‐end‐functionalized poly(N‐isopropylacrylamide) (PNIPAM) polymer H₂N‐TPP‐PNIPAM (TPP=5,10,15,20‐tetraphenyl‐21H,23H‐porphyrin) behaves as a multifunctional platform that displays a photodynamic effect, thermosensitivity, and fluorescence properties. The polymer was designed by using an asymmetrical aminoporphyrin (i.e., H₂N‐TPP‐Cl) as the initiator for the atom‐transfer radical polymerization of N‐isopropylacrylamide (NIPAM). The polydispersity index (PDI) obtained by gel‐permeation chromatography indicated that the molecular‐weight distribution was narrow (1.09<PDI<1.27). The lower critical solution temperatures of H₂N‐TPP‐PNIPAM showed a decreasing trend as the molecular weight was increased as a result of the incorporation of the porphyrin group at the end of the chain. The fluorescence spectra revealed the luminescent properties of the materials. The results of confocal laser scanning microscopy showed that the polymer could enter the cytoplasm through endocytosis. In addition, the multifunctional platform exhibited low toxicity against normal cells (L929) and cancer cells (Hela) and enhanced photodynamic activity towards HeLa cells, without significant necrocytosis towards L929 cells; as a result this material may be useful in the future for practical photodynamic therapy.     

Methoxy poly(ethylene glycol)‐b‐poly(octadecanoic anhydride)‐b‐methoxy poly(ethylene glycol) amphiphilic triblock copolymer nanoparticles as delivery vehicles for paclitaxel

A series of amphiphilic triblock copolymers, methoxy poly(ethylene glycol)‐b‐poly(octadecanoic anhydride)‐b‐methoxy poly(ethylene glycol) (mPEG‐b‐POA‐b‐mPEG), were prepared via melt polycondensation of methoxy poly(ethylene glycol) (mPEG) and poly(octadecanoic anhydride) (POA). mPEG‐b‐POA‐b‐mPEG were characterized by FTIR, ¹H‐NMR, GPC, DSC, and XRD. Drug‐loaded mPEG‐b‐POA‐b‐mPEG nanoparticles (NPs) with spherical morphology and narrow size polydispersity index were prepared by nanoprecipitation technique with paclitaxel as the model drug. In vitro release behaviors of drug‐loaded NPs present that the biphasic process and the release mechanism of each phase are zero order drug releases. According to this study, mPEG‐b‐POA‐b‐mPEG NPs could serve as suitable delivery agents for paclitaxel and other hydrophobic drugs. Copyright © 2009 John Wiley & Sons, Ltd.     

Glucose and pH Dual‐Responsive Nanogels for Efficient Protein Delivery

Direct delivery of protein suffers from their in vitro and in vivo instability, immunogenicity, and a relatively short half‐life within the body. To overcome these challenges, pH and glucose dual‐responsive biodegradable nanogels comprised of dextran and poly(L‐glutamic acid)‐g‐methoxy poly‐(ethylene glycol)/phenyl boronic acid (PLG‐g‐mPEG/PBA) are designed. The cross‐linked network imparted drug‐loading efficacy of α‐amylase up to 55.6% and hyaluronidase up to 29.1%. In vitro protein release profiles reveal that the release of protein is highly dependent on the pH or glucose concentrations, that is, less amount of protein is released at pH 7.4 or healthy blood glucose level (1 mg mL^?1 glucose), while quicker release of protein occurs at pH 5.5 or diabetic blood glucose level (above 3 mg mL^?1 glucose). Circular dichroism spectra show that the secondary structure of released protein is maintained compared to naive protein. Overall, the nanogels have provided a simple and effective strategy to deliver protein.     

Chitosan‐PEG Hydrogel with Sol–Gel Transition Triggerable by Multiple External Stimuli

Smart hydrogels play an increasingly important role in biomedical applications, since materials that are both biocompatible and multi‐stimuli‐responsive are highly desirable. A simple, organic solvent‐free method is presented to synthesize a biocompatible hydrogel that undergoes a sol–gel transition in response to multiple stimuli. Methoxy‐poly(ethylene glycol) (mPEG) is modified into carboxylic‐acid‐terminated‐methoxy‐poly(ethylene glycol) (mPEG‐acid), which is then grafted onto chitosan via amide linkages yielding mPEG‐g‐chitosan. Grafting of mPEG onto hydrophobic chitosan imparts hydrophilic properties to the resultant polymer. The mPEG‐g‐chitosan gel exhibits a controllable multi‐stimuli‐responsive property. The balance between hydrophilicity and hydrophobicity is believed to confer mPEG‐g‐chitosan with stimuli‐responsive behavior. The effect of salt concentration, solute concentration, temperature, and pH on the sol–gel transition of mPEG‐g‐chitosan is evaluated and the underlying mechanisms of mPEG‐g‐chitosan polymer packing and gelation property is discussed.

     

Dual‐Mode Antibacterial Conjugated Polymer Nanoparticles for Photothermal and Photodynamic Therapy

In this work, dual‐mode antibacterial conjugated polymer nanoparticles (DMCPNs) combined with photothermal therapy (PTT) and photodynamic therapy (PDT) are designed and explored for efficient killing of ampicillin‐resistant Escherichia coli (Amp^r E. coli). The DMCPNs are self‐assembled into nanoparticles with a size of 50.4 ± 0.6 nm by co‐precipitation method using the photothermal agent poly(diketopyrrolopyrrole‐thienothiophene) (PDPPTT) and the photosensitizer poly[2‐methoxy‐5‐((2‐ethylhexyl)oxy)‐p‐phenylenevinylene] (MEH‐PPV) in the presence of poly(styrene‐co‐maleic anhydride) which makes nanoparticles disperse well in water via hydrophobic interactions. Thus, DMCPNs simultaneously possess photothermal effect and the ability of sensitizing oxygen in the surrounding to generate reactive oxygen species upon the illumination of light, which could easily damage resistant bacteria. Under combined irradiation of near‐infrared light (550 mW cm^?2, 5 min) and white light (65 mW cm^?2, 5 min), DMCPNs with a concentration of 9.6 × 10^?4 µm could reach a 93% inhibition rate against Amp^r E. coli, which is higher than the efficiency treated by PTT or PDT alone. The dual‐mode nanoparticles provide potential for treating pathogenic infections induced by resistant microorganisms in clinic.     

Synthesis and properties of Polycaprolactone‐graft‐poly(2‐(dimethylamino)ethyl methacrylate‐co‐methoxy polyethylene glycol monomethacrylate) as non‐viral gene vector

Polycaprolactone‐graft‐Poly(2‐(dimethylamino)ethyl methacrylate‐co‐methoxy polyethylene glycol monomethacrylate) (PCL‐graft‐P(DMAEMA‐co‐mPEGMMA)) was synthesized by combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) was characterized by FTIR, ¹H NMR, and GPC. PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) with expected composition and structure was achieved. pH‐ and thermo‐sensitive properties of the PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) nanoparticles prepared by the nanoprecipitation method were investigated by TEM and DLS. With increase in the temperature, the size of PCL‐graft‐P(DMAEMA‐co‐mPEGMMA) nanoparticles is decreased under base environment. Furthermore, in vitro transfection and toxicity assays were tested in 293T cells. The results indicate that PCL‐graft‐P(DMAEMA‐co‐PEGMMA) has lower cytotoxicity at N/P ratios less than 10 with transfection efficiency concomitantly reducing at N/P ratios less than 20 compared to PCL‐graft‐PDMAEMA as the control. However, PCL‐graft‐P(DMAEMA‐co‐PEGMMA) presents higher transfection efficiency at N/P ratios more than 20 compared to PCL‐graft‐PDMAEMA. Copyright © 2010 John Wiley & Sons, Ltd.     

Porphyrin‐functionalized amphiphilic diblock copolypeptides for photodynamic therapy

A series of amphiphilic diblock copolypeptides (ADCs), 5‐(4‐aminophenyl)‐10,15,20‐triphenyl‐porphyrin (APP) conjugated poly(L ‐leucine)‐block‐polylysine (APP‐L_nK_m) with different molar ratios of L ‐leucine unit and lysine unit were designed and synthesized. The optimized composition of the polypeptide was determined to be APP‐L₁₀₉K₁₈₆, which has high fluorescence quantum yield and could self‐assemble into micelles in an aqueous medium with mean particle size <30 nm. The in vitro study indicates that APP‐L₁₀₉K₁₈₆ shows no significant dark cytotoxicity when the concentration is below 200 mg L^?1 for HepG2 and HeLa cells. In contrast, the polymer exhibits apparent phototoxicity with low IC₅₀ values toward HepG2 and HeLa cells, implying that the potential high photodynamic therapy efficacy of the polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of porphyrin‐end‐functionalized polycyclohexane with well‐controlled and defined polymer chain structure

Tetraphenylporphyrin‐end‐functionalized polycyclohexane (H₂TPP‐PCHE) and its metal complexes (MTPP‐PCHE) were synthesized as the first successful example of porphyrin‐end‐functionalized transparent and stable polymers with a well‐controlled and defined polymer chain structure. Chloromethyl‐end‐functionalized poly(1,3‐cyclohexadiene) (CM‐PCHD) was synthesized as prerequisite prepolymer by the postpolymerization reaction of poly(1,3‐cyclohexadienyl)lithium and chloro(chloromethyl)dimethylsilane. CM‐end‐functionalized PCHE (CM‐PCHE) was prepared by the complete hydrogenation of CM‐PCHD with p‐toluenesulfonyl hydrazide. H₂TPP was incorporated onto the polymer chain end by the addition of 5‐(4‐hydroxyphenyl)‐10,15,20‐triphenylporphyrin to CM‐PCHE. The complexation of H₂TPP‐PCHE and Zn(OAc)₂ (or PtCl₂) yielded a zinc (or platinum) complex of H₂TPP‐PCHE. H₂TPP‐PCHE and MTPP‐PCHE were readily soluble in common organic solvents, and PCHE did not inhibit the optical properties of the H₂TPP, ZnTPP, and PtTPP end groups. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of aromatic polyethersulfone‐based graft copolyacrylates via ATRP catalyzed by FeCl2/isophthalic acid

The atom transfer radical polymerization (ATRP) catalyzed by the FeCl₂/isophthalic acid system was used for the preparation of novel aromatic polyethersulfone (PSF)‐based graft copolymers in N,N‐dimethylformamide (DMF), such as aromatic PSF‐graft‐poly(methyl methacrylate), aromatic PSF‐graft‐polymethylacrylate, and aromatic PSF‐graft‐poly(butyl acrylate). The route consisted of two steps. The first step included the chloromethylation of aromatic PSF, and the second step involved the ATRP of acrylate monomers using chloromethylated aromatic PSF as the macroinitiator and FeCl₂/isophthalic acid as the catalyst in DMF. Characterization data by gel permeation chromatography, DSC, IR, ¹H NMR, and thermogravimetric analysis confirmed that the graft copolymerization was successful. Only one glass‐transition temperature (T_g) was observed for aromatic PSF‐graft‐poly(methyl methacrylate), and two T_g's were detected for aromatic PSF‐graft‐methyl acrylate and aromatic PSF‐graft‐poly(butyl acrylate). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2943–2950, 2001     

Reduction‐responsive poly (ethylene glycol)‐dexamethasone biarm conjugate and its self‐assembled nanomicelles: Preparation,physicochemical characterization,and thiol‐triggered drug release

In this study, a reduction‐responsive poly (ethylene glycol)‐dexamethasone biarm conjugate was synthesized as intracellular targeted drug delivery carriers. The hydroxyl end group of methoxy poly (ethylene glycol) (mPEG) was modified to introduce a biarm structure with bioreducible disulfide bond and amine end groups. Dexamethasone (Dex) as a nuclear targeting moiety was conjugated to the amine end groups of mPEG biarm derivatives, mPEG‐(NH₂)₂ or mPEG‐(ss‐NH₂)₂, with or without bioreducible disulfide bonds. The bioreducible and nonreducible mPEG‐Dex biarm conjugates, R‐mPEG‐Dex and N‐mPEG‐Dex, were synthesized and characterized by various analytical methods, proton nuclear magnetic resonance (¹H‐NMR), Fourier transform infraredspectroscopy (FT‐IR), dynamic light scattering (DLS), and fluorescence measurements. Amphiphilic mPEG‐Dex conjugates self‐assembled in aqueous solutions to form nanoparticles (NPs) with a size range of 130 to 150 nm, and their critical micelle concentrations (CMCs) were determined to be 12.4 and 15.3 mg/L, respectively, for bioreducible and nonreducible ones. The R‐mPEG‐Dex NPs maintained good colloidal stability in the presence of bovine serum albumin (BSA) for more than 1 week but demonstrated a significant change in colloidal stability in the presence of dithiothreitol (DTT). In DTT‐containing phosphate‐buffered saline (PBS), the bioreducible NPs showed not only reduction‐responsive destabilization with PEG shedding but also thiol‐dependent drug release profile. Our observations indicated that the R‐mPEG‐Dex NPs have a promising prospective as an efficient nanocarrier for intracellular targeted delivery of various anticancer drugs.     

Highly Efficient Drug Delivery Nanosystem via L‐Phenylalanine Triggering Based on Supramolecular Polymer Micelles

An intelligent drug delivery nanosystem has been developed based on biodegradable supramolecular polymer micelles (SMPMs). The drug release can be triggered from SMPMs responsively by a bioactive agent, L ‐phenylalanine in a controlled fashion. The SMPMs are constructed from ethylcellulose‐graft‐poly(ε‐caprolactone) (EC‐g‐PCL) and α‐cyclodextrin (α‐CD) derivate via host–guest and hydrophobic interactions. It has been found that these SMPMs have disassembled rapidly in response to an additional L ‐phenylalanine, due to great affinity discrepancy to α‐CD between L ‐phenylalanine and PCL. Experiments have been carried out on trigger‐controlled in vitro drug release of the SMPMs loaded with a model porphyrin based photosensitizer THPP. The result shows that the SMPMs released over 85% THPP in 6 h, which is two orders magnitudes faster than that of control. Also investigated is the photodynamic therapy (PDT) of THPP‐loaded SMPMs with and without L ‐phenylalanine on MCF‐7 carcinoma cell line. An effective trigger‐concentration dependent lethal effect has been found showing promise in clinical photodynamic therapy.

     

Investigation on thermoresponsive behavior of biodegradable poly(γ‐glutamic acid)‐graft‐L‐phenylalanine ethyl ester

The thermosensitivity of biodegradable and non‐toxic amphiphilic polymer derived from a naturally occurring polypeptide and a derivative of amino acid was first reported. The amphiphilic polymer consisted of poly(γ‐glutamic acid) (γ‐PGA) as a hydrophilic backbone, and L ‐phenylalanine ethyl ester (L ‐PAE) as a hydrophobic branch. Poly(γ‐glutamic acid)‐graft‐L ‐phenylalanine (γ‐PGA‐graft‐L ‐PAE) with grafting degrees of 7–49% were prepared by varying the content of a water‐soluble carbodiimide (WSC). γ‐PGA‐graft‐L ‐PAE with a grafting degree of 49% exhibited thermoresponsive phase transition behavior in an aqueous solution at around 80°C. The copolymers with grafting degrees in the range of 30–49% showed thermoresponsive properties in NaCl solution. A clouding temperature (T_cloud) could be adjusted by changing the polymer concentration and/or NaCl concentration. The thermoresponsive behavior was reversible. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Highly Efficient,Conjugated‐Polymer‐Based Nano‐Photosensitizers for Selectively Targeted Two‐Photon Photodynamic Therapy and Imaging of Cancer Cells

Two‐photon photodynamic therapy (2P‐PDT) is a promising noninvasive treatment of cancers and other diseases with three‐dimensional selectivity and deep penetration. However, clinical applications of 2P‐PDT are limited by small two‐photon absorption (TPA) cross sections of traditional photosensitizers. The development of folate receptor targeted nano‐photosensitizers based on conjugated polymers is described. In these nano‐photosensitizers, poly{9,9‐bis[6′′‐(bromohexyl)fluorene‐2,7‐ylenevinylene]‐co‐alt‐1,4‐(2,5‐dicyanophenylene)}, which is a conjugated polymer with a large TPA cross section, acts as a two‐photon light‐harvesting material to significantly enhance the two‐photon properties of the doped photosensitizer tetraphenylporphyrin (TPP) through energy transfer. These nanoparticles displayed up to 1020‐fold enhancement in two‐photon excitation emission and about 870‐fold enhancement in the two‐photon‐induced singlet oxygen generation capability of TPP. Surface‐functionalized folic acid groups make these nanoparticles highly selective in targeting and killing KB cancer cells over NIH/3T3 normal cells. The 2P‐PDT activity of these nanoparticles was significantly improved, potentially up to about 1000 times, as implied by the enhancement factors of two‐photon excitation emission and singlet oxygen generation. These nanoparticles could act as novel two‐photon nano‐photosensitizers with combined advantages of low dark cytotoxicity, targeted 2P‐PDT with high selectivity, and simultaneous two‐photon fluorescence imaging capability; these are all required for ideal two‐photon photosensitizers.     

Synthesis and characterization of controlled drug release carriers based on functionalized amphiphilic block copolymers and super‐paramagnetic iron oxide nanoparticles

In this study, synthesis and characterization of magnetic nanocarriers are reported for drug delivery based on the amphiphilic di‐block and tri‐block copolymers of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL) with surface modified super‐paramagnetite Fe₃O₄ nanoparticles (magnetic nanoparticles (MNPs)). The synthesized block copolymers (methoxy poly(ethylene glycol) (mPEG)–PCL and PCL–PEG–PCL) were characterized by Fourier transform infrared (FT‐IR), ¹H nuclear magnetic resonance (1H NMR), gel permeation chromatography (GPC), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC), and their properties such as critical micelle concentration, hydrophilicity to lipophilicity balance, and hydrolytic degradation were investigated. The block copolymers were functionalized with terminal azide groups (mPEG–PCL(N₃) and (N₃)PCL–PEG–PCL(N₃)), and magnetic Fe₃O₄ nanoparticles were surface modified with poly(acrylic acid) (PAA) and propargyl alcohol (MNP–PAA–C≡CH). Magnetic nanocarriers were synthesized by click reaction between azide‐terminated block copolymers and MNP–PAA–C≡CH and characterized by FT‐IR, thermogravimetric analysis (TGA), dynamic light scattering (DLS), vibrating sample magnetometer (VSM), and transmission electron microscopy (TEM), and cytotoxicity was investigated by methyl thiazolyl tetrazolium assay. In vitro drug loading and release and release kinetics were investigated. Copyright © 2015 John Wiley & Sons, Ltd.     

Highly efficient "grafting from" an α-helical polypeptide backbone by atom transfer radical polymerization

Because of their favorable biodegradability, biocompatibility, regular secondary structures, and stimuli‐responsiveness, synthetic polypeptides have attracted more and more attention in the biomedical material field. In this work, a novel thermo‐responsive graft polypeptide, poly(L ‐glutamate)‐graft‐poly(2‐(2‐methoxyethoxy)ethyl methacrylate) (PLG‐g‐PMEO₂MA), is prepared through a combination of ring‐opening polymerization and atom transfer radical polymerization. The structure of PLG‐g‐PMEO₂MA is confirmed by FT‐IR, ¹H NMR, and GPC analyses. The phase transition temperature of PLG‐g‐PMEO₂MA is adjustable by varying the NaCl concentration in aqueous solution. PLG‐g‐PMEO₂MA adopts α‐helical conformations both in aqueous solution at 25 and 60 °C and even in the solid state. In addition, PLG‐g‐PMEO₂MA forms stimuli‐responsive micelles with an α‐helical core and a thermo‐responsive shell in water.

     

Synthesis of AB3‐type miktoarm star polymers with steroid core via a combination of “Click” chemistry and ring opening polymerization techniques

Well‐defined AB₃‐type miktoarm star‐shaped polymers with cholic acid (CA) core were fabricated with a combination of “click” chemistry and ring opening polymerization (ROP) methods. Firstly, azide end‐functional poly(ethylene glycol) (mPEG), poly(methyl methacrylate) (PMMA), polystyrene (PS), and poly(ε‐caprolactone) (PCL) polymers were prepared via controlled polymerization and chemical modification methods. Then, CA moieties containing three OH groups were introduced to these polymers as the end groups via Cu(I)‐catalyzed click reaction between azide end‐functional groups of the polymers ( mPEG‐N₃ , PMMA‐N₃ , PS‐N₃ , and PCL‐N₃ ) and ethynyl‐functional CA under ambient conditions, yielding CA end‐functional polymers ( mPEG‐Cholic , PMMA‐Cholic , PS‐Cholic , and PCL‐Cholic ). Finally, the obtained CA end‐capped polymers were employed as the macroinitiators in the ROP of ε‐caprolactone (ε‐CL) yielding AB₃‐type miktoarm star polymers ( mPEG‐Cholic‐PCL₃ , PMMA‐Cholic‐PCL₃ , and PS‐Cholic‐PCL₃ ) and asymmetric star polymer [ Cholic‐(PCL)₄ ]. The chemical structures of the obtained intermediates and polymers were confirmed via Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopic techniques. Thermal decomposition behaviors and phase transitions were studied in detail using thermogravimetric analysis and differential scanning calorimetry experiments. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3390–3399     

Synthesis of polybutadiene‐graft‐poly(dimethylsiloxane) and polyethylene‐graft‐poly(dimethylsiloxane) copolymers with hydrosilylation reactions

We report preliminary results for the synthesis of polyethylene‐graft‐poly(dimethylsiloxane) copolymers obtained by catalytic hydrogenation of polybutadiene‐graft‐poly(dimethylsiloxane) copolymers (PB‐g‐PDMS). These last copolymers were synthesized by hydrosilylation reactions between commercial polybutadiene and ω‐silane poly(dimethylsiloxane). The reaction was carried in solution catalyzed by cis‐dichloro bis(diethylsufide) platinum(II) salt. The PB‐g‐PDMS copolymers were analyzed by ¹H and ¹³C NMR spectroscopies, and the relative weight percentages of the grafted poly(dimethylsiloxane) macromonomer were determined from the integrated peak areas of the spectra. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2920–2930, 2004     

Gas‐forming poly(ethylene glycol)‐b‐poly(L‐lactic acid) micelles

In this study, a novel drug‐carrying micelle composed of methoxy poly(ethylene glycol) (mPEG)‐b‐poly(L‐lactic acid) (PLLA) with gas‐forming carbonate linkage was fabricated. Here, the gas‐forming carbonate linkage was formed by the chemical coupling of the terminal hydroxyl group of the PLLA block and benzyl chloroformate (BC). mPEG‐b‐PLLA‐BC was self‐organized in aqueous solution: the PEG block on the hydrophilic outer shell and the PLLA‐BC block in the hydrophoboic innor core. The cleavage of carbonate linkage by hydrolysis and formation of carbon dioxide nanobubbles in the micellar core enabled an accelerated release of the encapsulated anticancer drug (doxorubicin: DOX) from the mPEG‐b‐PLLA‐BC micelles. The amount of drug (DOX) released from the mPEG‐b‐PLLA‐BC micelle was higher than that from the conventional mPEG‐b‐PLLA micelle, which allowed for increased in vitro toxicity against KB tumor cells. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of poly(L‐lysine)‐graft‐polyesters through Michael addition and their self‐assemblies in aqueous solutions

A series of poly(L ‐lysine)s grafted with aliphatic polyesters, poly(L ‐lysine)‐graft‐poly(L ‐lactide) (PLy‐g‐PLLA) and poly(L ‐lysine)‐graft‐poly(?‐caprolactone) (PLy‐ g‐PCL), were synthesized through the Michael addition of poly(L ‐lysine) and maleimido‐terminated poly(L ‐lactide) or poly(?‐caprolactone). The graft density of the polyesters could be adjusted by the variation of the feed ratio of poly(L ‐lysine) to the maleimido‐terminated polyesters. IR spectra of PLy‐g‐PCL showed that the graft copolymers adopted an α‐helix conformation in the solid state. Differential scanning calorimetry measurements of the two kinds of graft copolymers indicated that the glass transition temperature of PLy‐g‐PLLA and the melting temperature of PLy‐g‐PCL increased with the increasing graft density of the polyesters on the backbone of poly(L ‐lysine). Circular dichroism analysis of PLy‐g‐PCL in water demonstrated that the graft copolymer existed in a random‐coil conformation at pH 6 and as an α‐helix at pH 9. In addition, PLy‐g‐PCL was found to form micelles to vesicles in an aqueous medium with the increasing graft density of poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1889–1898, 2007