基于光子晶体光纤和拉锥式单模光纤的超连续光谱产生的实验研究

本文使用重复频率为250 MHz、脉冲宽度为135 fs、最大功率为2.2 W的锁模掺镱光纤激光作为种子源,利用光子晶体光纤和自制的拉锥式单模光纤两种高非线性光纤研究了超连续光谱的产生特性,通过对比两种光纤的结构、色散等特性,分析了拉曼孤子、色散波及其他非线性效应对产生的超连续谱形状的影响,并均得到了大于一个倍频程的超连续光谱,特别是拉锥式单模光纤产生的超连续光谱,耦合效率达到60%,这为众多研究领域,尤其是光学频率梳的建立提供了实用的超连续光源.     

Parabolic pulse generation in a dispersion-decreasing solid-core photonic bandgap Bragg fiber

We analyze the interplay of nonlinearity and dispersion in a dispersion-decreasing photonic bandgap Bragg fiber as a new platform for generating parabolic pulses. A suitably designed linearly tapered, low-index-contrast, solid-core Bragg fiber - amenable to fabrication by conventional modified chemical vapor deposition technology - is shown to yield stable parabolic pulses. The fiber design was optimized through a simple and accurate transfer-matrix formalism and pulse evolution was studied by the well-known split-step Fourier method. Our study revealed feasibility of generating parabolic pulses in such a dispersion-decreasing Bragg fiber of length as short as 1 m. We have also studied the effect of third order dispersion on generated parabolic pulse, which is an important deteriorating factor in such applications. The effective single-mode operation of the proposed device is achieved through appropriate tailoring of the outer cladding layers.     

All-solid photonic bandgap fiber

We describe the design and fabrication of a photonic bandgap fiber formed with two different glasses. As in a hollow-core fiber, light is guided in a low-index core region because of the antiresonances of the high-index strands in the fiber cladding. The structure described represents an ideal bandgap fiber that exhibits no interface modes and guides over the full width of multiple bandgaps.     

Hollow-core photonic bandgap fiber polarizer

Broadband, compact in-fiber polarizers were fabricated using a pulsed CO(2) laser to modify the air holes along one side of the hollow-core photonic bandgap fibers. The polarizers have lengths from 3 to 6 mm and exhibit a polarization extinction ratio of better than 20 dB over a wavelength range larger than 100 nm at approximately 1,550 nm.     

Low-loss all-solid photonic bandgap fiber

We report the fabrication and characterization of a new type all-solid photonic bandgap fiber. By introducing an index depressed layer around the high-index rod in the unit cell of photonic crystal cladding, transmission loss as low as 2 dB/km within the first bandgap is realized for the all-solid photonic bandgap fiber with a bandwidth of over 700 nm. The bend loss experiment shows that the photonic bandgap fiber is much less bend sensitive than single-mode fiber.     

Endlessly single-mode photonic crystal fiber

We made an all-silica optical fiber by embedding a central core in a two-dimensional photonic crystal with a micrometer-spaced hexagonal array of air holes. An effective-index model confirms that such a fiber can be single mode for any wavelength. Its useful single-mode range within the transparency window of silica, although wide, is ultimately bounded by a bend-loss edge at short wavelengths as well as at long wavelengths.     

Partially liquid-filled hollow-core photonic crystal fiber polarizer

A compact fiber polarizer is demonstrated by the filling of selected air holes of a hollow-core photonic crystal fiber (PCF) with a liquid. The liquid-filling results in an asymmetric waveguide structure, leading to a large polarization dependent loss. A 6 mm long ethanol-filled PCF exhibits a polarization extinction ratio of ～18 dB over a wavelength range from 1480 nm to 1600 nm.     

Soliton-induced supercontinuum generation in liquid-filled photonic crystal fibre

We aim to study the nonlinear optical phenomena with ultra-broadband radiation in photonic crystal fibre (PCF). While PCFs with cores made from different glasses are well studied in previous works, in this paper, it is planned to investigate the dynamics of nonlinear processes of supercontinuum generation (SCG) in liquid-filled PCF (LCPCF) to understand the physical phenomena of femtosecond pulse propagation, particularly, the temporal and spectral changes of the pulse propagating through specific PCFs. Since the CS₂-filled LCPCF has complex nonlinear phenomena, we intend to analyse the role of saturable nonlinear response and slow nonlinear response on SCG in detail. For the physical explanation, soliton fission and modulational instability techniques will be implemented to investigate the impact of slow nonlinear response and saturable nonlinear response respectively, in SCG process.     

Mode-locked all-solid photonic bandgap fiber laser

We report on a mode-locked all-normal dispersion fiber laser featuring a large-mode-area all-solid photonic bandgap fiber. The self-starting chirped-pulse laser delivers 660 mW of average power at a repetition rate of 30 MHz, leading to 22?nJ energy. The output pulses are dechirped outside the cavity to nearly transform-limited duration of 50?fs. Numerical simulations are in good agreement with experiments and highlight the key role of passive spectral filtering on pulse shaping.     

Three-level neodymium fiber laser incorporating photonic bandgap fiber

We report a neodymium fiber laser incorporating an all-solid photonic bandgap fiber to suppress the four-level laser transition 4F(3/2)-4I(11/2). We demonstrate lasing at 907 nm on the three-level transition 4F(3/2)-4I(9/2) when pumping at 808 nm. The maximum slope efficiency obtained was 32% with a threshold pump power of 70 mW.     

单偏振单模聚合物光子晶体光纤设计

 设计了一种聚甲基丙烯酸甲酯(PMMA)基的单偏振单模(SPSM)微结构聚合物光纤(MPOF)。利用全矢量有限元法和光束传播法相结合分析了这种光纤的偏振特性和约束损耗。通过优化光纤结构参数,发现在0.51 μm～0.62 μm的可见光波长范围,由于基模两个正交偏振模的截止波长不同,这种微结构聚合物光纤只能传输基模中的一个偏振模,从而实现单偏振单模运转。该11圈圆空气孔六角排列光纤结构的传导偏振模在0.57 μm波长处约束损耗仅为1.13 dB/m,这种低损耗的单偏振单模微结构聚合物光纤可有效消除传统保偏光纤固有的偏振串扰和偏振模色散。     

A hollow-core photonic bandgap fiber polarization controller

A polarization controller was built by pressurizing laterally three segments of a commercial hollow-core photonic bandgap fiber. By varying the magnitudes of the applied pressures, the output state of polarization showed a good coverage of all the possible polarization states on the surface of the Poincaré sphere.     

Design of air-guiding honeycomb photonic bandgap fiber

We introduce a design procedure for hollow-core photonic bandgap (PBG) fiber with a cladding made of air-silica honeycomb photonic crystal (PC). It is found that air-guiding can be realized in both fundamental and secondary PBG regions of the cladding PC. Dispersion and radiation loss of the fundamental mode for two types of fiber structure are theoretically calculated. The fibers show promising waveguiding ability.     

Fabrication of all-solid photonic bandgap fiber coupler

We report the fabrication of a tunable all-solid photonic bandgap fiber coupler based on the side-polishing technique. This device is believed to be the first demonstration of a photonic bandgap fiber coupler to eliminate the contamination of the open air holes. By adjusting the length of the interaction section, the tunable coupling ratio as much as 92.5% at 1550 nm is achieved. The investigation of the spectrum properties shows that the coupler has excellent tunability properties, for which the coupling ratio can be smoothly and continuously controlled.     

Similariton fiber laser with a hollow-core photonic bandgap fiber for dispersion control

We report on an ytterbium-doped similariton fiber ring laser with a hollow-core photonic bandgap fiber for intracavity dispersion control. The oscillator is hybrid mode locked with a saturable Bragg reflector and by nonlinear polarization evolution. This scheme allows for an exact adjustment of the transmission characteristic to avoid the formation of bunched noiselike pulses while the self-starting characteristic is preserved. The oscillator generates highly stretched similaritons at 1025 nm with a pulse energy above 1n J at a repetition rate of 21.9 MHz.     

Near-infrared Raman spectroscopy using hollow-core photonic bandgap fibers

We report a NIR Raman spectroscopy system incorporating hollow-core photonic bandgap fibers (HC-PBFs) in both the excitation and collection paths. Raman excitation was achieved at NIR laser wavelength of 785 nm. We demonstrate that using HC-PBFs, Raman spectroscopy can be performed without the use of an additional longpass filter on the collection side. A narrow bandpass filter on the excitation side is also not required. These results provide a framework where HC-PBF based Raman probes can be developed and used in space restricted biomedical and sensing applications.     

Very-large-mode-area photonic bandgap Bragg fiber polarizing in a wide spectral range

A design of a polarizing all-glass Bragg fiber with a microstructure core has been proposed for the first time. This design provides suppression of high-order modes and of one of the polarization states of the fundamental mode. The polarizing fiber was fabricated by a new, simple method based on a combination of the modified chemical vapor deposition (MCVD) process and the rod-in-tube technique. The mode field area has been found to be about 870 μm2 near λ=1064 nm. The polarization extinction ratio better than 13 dB has been observed over a 33% wavelength range (from 1 to 1.4 μm) after propagation in a 1.7 m fiber piece bent to a radius of 70 cm.     

Linearly polarized fiber laser using a point-by-point Bragg grating in a single-polarization photonic bandgap fiber

We present a narrow-linewidth, linearly polarized neodymium-doped fiber laser that incorporates a point-by-point Bragg grating inscribed into the core of a single-polarization all-solid photonic bandgap fiber. The Bragg grating was written within a single-polarization wavelength band of the fiber; thus, the Bragg reflection was polarized. This all-fiber laser produced 7.2 W, linearly polarized output with 25 pm FWHM and 19.6 dB polarization extinction ratio.     

Design of a single-polarization single-mode photonic crystal fiber double-core coupler

A simple single-polarization single-mode (SPSM) photonic crystal fiber (PCF) coupler with two cores is introduced. The full-vector finite-element method (FEM) is applied to analyze the modal interference phenomenon of the even and odd modes of two orthogonal polarizations and the power propagation within the two cores. Meanwhile, the SPSM coupling wavelength range and its corresponding coupling length for different structure parameters are numerically analyzed. The numerical results show that SPSM coupling can be realized with a broad range of wavelength, and the coupling length can be of millimeter magnitude. Moreover, the SPSM coupling wavelength range and the coupling length can be optimized by designing proper mirco-structure parameters of the coupler.     

High-efficiency generation of a supercontinuum in an optical fiber

The results of experimental studies of high-efficiency generation of a supercontinuum in different types of single-mode optical fibers by pulses with a width of ～20 ps and with a wavelength widely tunable within the regions of normal and anomalous dispersion of the fibers are reported. A high efficiency of transformation of initially monochromatic radiation into a wide-spectrum supercontinuum with intense wings (in the range of 1000–2100 nm at a transformation efficiency of 95%) is demonstrated.