离子交换色谱法检测离子液体中阴离子

建立了用阴离子交换分离柱、化学抑制模式、电导检测测定系列离子液体中BF4^-阴离子及其他杂阴离子（F^-、Cl^-、Br^-）含量的方法，并用于在线监控离子液体合成工艺中阴离子杂质含量。确定淋洗液组成为1．6mmol／L Na2CO3＋3．9mmol／L NaHCO3，流速为0．6mL／min。本方法对所测阴离子检出限分别为50μg／L（F^-、Br^-）和80μg／L（BF4^-）；线性范围在3个数量级以上；r〉0．999；回收率在98％～102％之间。方法用于对离子液体小试工艺样品分析及过程监控时，结果满意，样品的RSD小于2．6％（n=6）。     

牡丹皮中有效成分丹皮酚的毛细管电泳快速检测新方法

采用毛细管电泳高频电导法对丹皮酚进行了快速分离检测。对电泳介质的种类及浓度、操作电压和进样时间等影响因素进行了优化。最佳条件为：分离介质1．0mmol／LH3BO3-3．0mmol／L三乙胺-10％CH,OH（pH=8．0）,分离电压20．0kV,25．0cm位差虹吸进样8．0s。在该条件下。可在4min内实现对丹皮酚的分离检测。线性范围为2．0～105μg／mL,检出限为0．3μg／mL。成功测定了中药牡丹皮中的丹皮酚,回收率达94％～99％。方法简便、快速、灵敏,可用于药物分析。     

用GC-FID和GC-TOF-MS方法分析α-硫辛酸中有机溶剂残留量

采用GC-TOF-MS鉴定残留有机溶剂,以HP-5毛细管柱为分离柱,FID为检测器,正辛醇为溶剂,外标法进行定量。乙醚、异丙醚的线性范围分别为34．4～344．0μg／mL（r=0．9999）,23．0～230．0μg／mL（r=0．9999）;方法精密度和稳定性试验RSD（n=6）均〈1％;平均回收率范围98．1％～100．7％,RSD0．75～2．7％;检出限分别为0．1,0．08μg／mL。     

毛细管电泳高频电导法测定虫草中的有效成份

建立了毛细管电泳高频电导法同时测定腺苷和虫草素的方法。实验对电泳介质的种类、浓度以及操作电压和进样时间等因素进行了优化,在4mmol／L乳酸＋10％异丙醇＋80μg／mL羟甲基纤维素钠（pH=4．0）,分离电压20．OkV的条下测定了天然虫草和人工虫草菌丝制品中的腺苷和虫草素的含量,线性范围分别为2．0μg／mL～120μg／mL和3．0μg／mL～110μg／mL,检出限分别为0．5μg／mL和1．0μg／mL。     

毛细管电泳高频电导法测定尿中MDMA及其代谢物

建立了尿样中MDMA及其代谢物MDA的毛细管电泳高频电导法检测分析方法。对电泳分离缓冲介质的种类、浓度、pH值以及分离操作电压和进样时间等实验条件进行了优化。缓冲液为2．5mmol／L NH4 Ac 0．5mmol／L HAc 2mmol／L SDS 10mmol／L β-CD,分离电压为15kV时,可实现较好的分离与检测。该法在2．5～80μg/mL范围内。MDMA和MDA线性相关系数r分别为0．998和0．999,检出限均为1．0μg/mL(S／N=3)。不同添加浓度水平尿样,日间和日内RSD均小于5％,回收率均在90％以上,适于法医毒物分析和临床药物监测的需要。     

固相微萃取-高效液相色谱联用测定环境水样中双酚A的自由溶解态浓度

应用可忽略耗损固相微萃取与高效液相色谱联用技术测定了环境水样中双酚A的自由溶解态浓度。为了获得高的灵敏度并减小环境因素（如温度和搅拌等）的影响,采用商品化固相微萃取纤维CW／TPR进行平衡采样。在环境水样常见pH（5～8）、缓冲容量（5～200mmol／L）和盐度（0～500mmol／L）条件下,4h可以达到萃取平衡。100mL样品足以避免样品耗损。以配制在250mmol／L NaCl和125mmol／L磷酸盐溶液（pH6．4）中的双酚A标准溶液进行校准,可以将缓冲液（0～200mmol／L）、盐度（0～500mmol／L）和pH（5．7～8．5）的影响控制在15％偏差范围以内。如需更准确的测定,也可以对样品pH值的影响加以校正。pH为6．4时,方法的线性范围为0．1～250μg／L,检出限为0．03μg／L,相对标准偏差（5μg/L,n=3）为1．1％。采用本方法测定了污水处理厂排水口的双酚A的自由溶解态浓度。     

非水体系毛细管电泳-紫外检测法测定苯甲酸和苯甲醛

建立了用非水相体系高效毛细管电泳-紫外检测法同时测定苯甲酸和苯甲醛的新方法，考察了运行电压、非水相介质和电解质等因素的影响，在25℃下，以V（乙腈）：V（碳酸丙烯酯）=1：1的混合液为溶剂，缓冲体系中含15mmol／L十六烷基三甲基溴化铵体积分数1％乙酸，重力进样30S，运行电压20kV，毛细管总长45cm有效长度30cm，φ75μm，检测波长285nm。苯甲酸线性范围为5～40μg／mL，线性方程为：Y=13．473ρ＋13．336，相关系数r=0．9985，检出限为0．92μg／mL，RSD为3．8％。苯甲醛的线性范围75～1125μg／mL线性方程为：Y=5．2449ρ＋564．01，相关系数r=0．9997，检出限为15．60μg／mL，RSD为3．5％。已用于经空气氧化后的苯甲醛中苯甲酸和苯甲醛的测定。     

毛细管气相色谱法同时测定盐酸氨溴索中甲醇和丙酮的残留量

建立毛细管气相色谱同时测定盐酸氨溴索原料药中甲醇、丙酮两种有机溶刺残留量的方法。两种残留有机溶剂在DB-624毛细管气相色谱柱上均达到良好分离。甲醇和丙酮的线性范围分别为32．54～325．4μg／mL（r=0．9998）、40．68—406．8μg／mL（r=0．9995）,回收率分别为94．7％～101．1％、93．9％～99．1％,检出限分别小于20、10μg／mL,测定结果的相对标准偏差均不大于3．6％（n=5）。     

离子色谱-在线柱后电化学衍生-荧光法测定酪氨酸

采用自制电解池作为电化学衍生装置,建立了离子色谱一电化学衍生一荧光法测定饮料中的酪氨酸。在碱性淋洗液作用下,酪氨酸在阴离子交换柱上被分离,到达自制电解池的阳极室,在阳极上被氧化,氧化后的产物因具有较强的荧光而被荧光检测器检测。离子化试剂既可以做色谱分离所需的淋洗液,又可以作为电化学反应优良的支持电解液,因此,离子色谱和电化学衍生具有较好的兼容性。最佳的实验条件为：淋洗液NaOH（10mmol／L）＋乙腈（ACN,1＋9）,流动相流速1．0mL／min,电解池电压1．0V,激发／发射波长320／420NM。在优化的实验条件下,酪氨酸的线性范围为0．01～10mg／L,检出限为1．2μg／L（信噪比S／N=3）。50μg／L的酪氨酸标准溶液进样7次,得到的色谱峰面积相对标准偏差为2．5％。方法具有快速,灵敏和选择性好的特点,并成功用于饮料中酪氨酸的测定。     

离子色谱法检测食品添加剂焦碳酸二甲酯中的氯离子

建立离子色谱法检测食品添加剂焦碳酸二甲酯（DMDC）中的杂质氯离子的方法。样品用水溶解超声定容后,采用SH-AC-1阴离子交换柱（250mm×4．6mm,5μm）分离,抑制电导法检测。考察了淋洗液种类、浓度对氯离子与干扰离子分离度的影响。最佳色谱条件：以0．005mol／L的四硼酸钠水溶液为淋洗液,流速1．0mL／min。在此条件下,样品中的氯离子可以和其它干扰离子分离,而且分离度达3．0以上,峰形对称。在氯离子浓度为0．1～5．0mg／L的范围内,可获得良好的线性关系,线性相关系数大于0．999;氯离子检出限（S／N=3）达0．007mg／L,加标回收率为97．5％～98．9％。该方法可以用于食品添加剂DMDC中氯离子的测定。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.