Isocyanate formation in the catalytic reaction of CO + NO on Pd(111): an in situ infrared spectroscopic study at elevated pressures

The catalytic CO + NO reaction to form CO2, N2, and N2O has been studied on a Pd(111) surface at pressures up to 240 mbar using in situ polarization modulation infrared reflection absorption spectroscopy (PM-IRAS). At 240 mbar, for a pressure ratio of PCO:PNO = 3:2 and under reaction conditions, besides adsorbed CO, the formation of isocyanate (-NCO) was observed. Once produced at 500-625 K, the isocyanate species was stable within the entire temperature range studied (300-625 K). On the other hand, its formation required a total CO + NO pressure of at least 0.6 mbar, illustrating the importance of in situ infrared experiments under high-pressure conditions. The significance of the isocyanate formation for the CO + NO reaction on Pd(111) is discussed.     

In situ FTIR study on the formation and adsorption of CO on alumina-supported noble metal catalysts from H2 and CO2 in the presence of water vapor at high pressures

The formation and adsorption of CO from CO(2) and H(2) at high pressures were studied over alumina-supported noble metal catalysts (Pt, Pd, Rh, Ru) by in situ FTIR measurements. To examine the effects of surface structure of supported metal particles and water vapor on the CO adsorption, FTIR spectra were collected at 323 K with untreated and heat (673 K) treated catalysts in the absence and presence of water (H(2)O, D(2)O). It was observed that the adsorption of CO occurred on all the metal catalysts at high pressures, some CO species still remained adsorbed under ambient conditions after the high pressure FTIR measurements, and the frequencies of the adsorbed CO species were lower either for the heat treated samples or in the presence of water vapor. It is assumed that the CO absorption bands on atomically smoother surfaces appear at lower frequencies and that water molecules are adsorbed more preferentially on atomically rough surfaces rather than CO species.     

Reversible hydrogenation of surface N atoms to form NH on Pt(111)

The formation and dissociation chemistry of the NH species on Pt(111) was characterized with reflection absorption infrared spectroscopy and temperature programmed desorption. Irradiation of a chemisorbed bilayer of ammonia with a 100 eV electron beam at 85 K leads to a mixture of NH, N, and H on the surface. Annealing to temperatures in the range of 200-300 K leads to reaction of N and H to form additional NH. The NH species has an intense and narrow NH stretch peak at 3320 cm(-1), while no peak due to the PtNH bend is observed above 800 cm(-1). The NH species is stable up to a temperature of approximately 400 K. The surface N atoms produced from NH dissociation are readily hydrogenated back to NH by exposure of the surface to H2. However, NH cannot be further hydrogenated to generate adsorbed NH2 or to NH3 under the conditions used here. Exposure of the NH/Pt(111) surface to D2 at 380 K produces the ND species. Comparison with the results of density functional theory calculations based on small Pt clusters indicates that NH occupies three-fold hollow sites with the molecular axis perpendicular to the surface.     

Adsorption, desorption, and clustering of H2O on Pt111

The adsorption, desorption, and clustering behavior of H2O on Pt111 has been investigated by specular He scattering. The data show that water adsorbed on a clean Pt111 surface undergoes a structural transition from a random distribution to clustered islands near 60 K. The initial helium scattering cross sections as a function of temperature are found to be insensitive to the incident H2O flux over a range of 0.005 monolayers (ML)/s-0.55 ML/s indicating that the clustering process is more complex than simple surface diffusion. The coarsening process of an initially random distribution of water deposited at 25 K is found to occur over a broad temperature range, 60相似文献   

Water adsorption, desorption, and clustering on FeO(111)

The adsorption of water on FeO(111) is investigated using temperature programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS). Well-ordered 2 ML thick FeO(111) films are grown epitaxially on a Pt(111) substrate. Water adsorbs molecularly on FeO(111) and desorbs with a well resolved monolayer peak. IRAS measurements as a function of coverage are performed for water deposited at 30 and 135 K. For all coverages (0.2 ML and greater), the adsorbed water exhibits significant hydrogen bonding. Differences in IRAS spectra for water adsorbed at 30 and 135 K are subtle but suggest that water adsorbed at 135 K is well ordered. Monolayer nitrogen TPD spectra from water covered FeO(111) surfaces are used to investigate the clustering of the water as a function of deposition or annealing temperature. Temperature dependent water overlayer structures result from differences in water diffusion rates on bare FeO(111) and on water adsorbed on FeO(111). Features in the nitrogen TPD spectra allow the monolayer wetting and 2-dimensional (2D) ordering of water on FeO(111) to be followed. Voids in a partially disordered first water layer exist for water deposited below 120 K and ordered 2D islands are found when depositing water above 120 K.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

Adsorption and desorption of HCl on Pt(111)

The adsorption and desorption of HCl on Pt(111) is investigated by temperature programmed desorption, infrared reflection absorption spectroscopy, and low energy electron diffraction. Five peaks are identified in the desorption spectra prior to the onset of multilayer desorption. At low coverage ( < 0.25 monolayers (ML)), desorption peaks at approximately 135 and 200 K are observed and assigned to recombinative desorption of dissociated HCl. At higher coverages, desorption peaks at 70, 77, and 84 K are observed. These peaks are assigned to the desorption of molecularly adsorbed HCl. The infrared spectra are in agreement with these assignments and show that HCl deposited at 20 K is amorphous but crystallizes when heated above 60 K. Kinetic analysis of the desorption spectra reveals a strong repulsive coverage dependence for the desorption energy of the low coverage features ( < 0.25 ML). The diffraction data indicate that at low temperature the adsorbed HCl clusters into ordered islands with a (3 x 3) structure and a local coverage of 4/9 with respect to the Pt(111) substrate.     

In situ ATR-IR spectroscopic and reaction kinetics studies of water-gas shift and methanol reforming on Pt/Al2O3 catalysts in vapor and liquid phases

Reaction kinetics measurements of the water-gas shift reaction were carried out at 373 K on Pt/Al2O3 in vapor phase to investigate the effects of CO, H2, and H2O partial pressures. Results of in situ ATR-IR studies conducted in vapor phase under similar conditions suggest that the Pt surface coverage by adsorbed CO is high (approximately 90% of the saturation coverage), leading to a negligible effect of the CO pressures on the rate of reaction. The negative reaction order with respect to the H2 pressure is caused by the increased coverage of adsorbed H atoms, and the fractional positive order with respect to the water pressure is consistent with non-equilibrated H2O dissociation on Pt. Results of in situ ATR-IR studies carried out at 373 K show that the presence of liquid water leads to a slight decrease in the Pt surface coverage by adsorbed CO (approximately 80% of the saturation coverage) when the CO partial pressure is the same as in the vapor-phase studies. The rate of the WGS reaction in the presence of liquid water is comparable to the rate under complete vaporization conditions when other factors (such as CO partial pressure) are held constant. Reaction kinetics measurements of methanol reforming were carried out at 423 K over a total pressure range of 1.36-5.84 bar. In situ ATR-IR studies were conducted at 423 K to determine the Pt surface coverage by adsorbed CO in completely vaporized methanol feeds and in aqueous methanol solutions. The decomposition of methanol is found to be slower during the reforming of methanol in liquid phase than in vapor phase, which leads to a lower rate of hydrogen production in liquid phase (0.08 min(-1) at 4.88 bar) than in vapor phase (0.23 min(-1) at 4.46 bar). The lower reaction order with respect to methanol concentration observed for vapor-phase versus liquid-phase methanol reforming (0.2 versus 0.8, respectively) is due to the higher extent of CO poisoning on Pt for reforming in vapor phase than in liquid phase, based on the higher coverage by adsorbed CO observed in completely vaporized methanol feeds (55-60% of the saturation coverage) than in aqueous methanol feed solutions (29-40% of the saturation coverage).     

Vibrational spectroscopy on platinum single-crystal electrodes: Part I. In-situ infrared spectroscopic studies of the adsorption and oxidation of CO on Pt (111) in sulphuric acid

Platinum single-crystal electrodes of 5 mm diameter were prepared for in situ infrared spectroscopic measurements by melting platinum wires. The linear potential sweep voltammograms of hydrogen adsorption/desorption on Pt (111), (110) and (100) in 0.5 M sulphuric acid are in excellent agreement with those observed on smaller platinum single-crystal surfaces.The adsorption and oxidation of CO on Pt (111) in 0.5 M sulphuric acid was studied by in situ polarization modulated infrared reflection absorption spectroscopy. The effects of the initial adsorption potential and surface reconstruction on the nature and oxidation mechanism of the adsorbed CO layer are reported.     

Experimental and theoretical study of reactivity trends for methanol on Co/Pt(111) and Ni/Pt(111) bimetallic surfaces

Methanol was used as a probe molecule to examine the reforming activity of oxygenates on NiPt(111) and CoPt(111) bimetallic surfaces, utilizing density functional theory (DFT) modeling, temperature-programmed desorption, and high-resolution electron energy loss spectroscopy (HREELS). DFT results revealed a correlation between the methanol and methoxy binding energies and the surface d-band center of various NiPt(111) and CoPt(111) bimetallic surfaces. Consistent with DFT predictions, increased production of H2 and CO from methanol was observed on a Ni surface monolayer on Pt(111), designated as Ni-Pt-Pt(111), as compared to the subsurface monolayer Pt-Ni-Pt(111) surface. HREELS was used to verify the presence and subsequent decomposition of methoxy intermediates on NiPt(111) and CoPt(111) bimetallic surfaces. On Ni-Pt-Pt(111) the methoxy species decomposed to a formaldehyde intermediate below 300 K; this species reacted at approximately 300 K to form CO and H2. On Co-Pt-Pt(111), methoxy was stable up to approximately 350 K and decomposed to form CO and H2. Overall, trends in methanol reactivity on NiPt(111) bimetallic surfaces were similar to those previously determined for ethanol and ethylene glycol.     

Experimental and DFT studies of the conversion of ethanol and acetic acid on PtSn-based catalysts

Reaction kinetics studies were conducted for the conversions of ethanol and acetic acid over silica-supported Pt and Pt/Sn catalysts at temperatures from 500 to 600 K. Addition of Sn to Pt catalysts inhibits the decomposition of ethanol to CO, CH4, and C2H6, such that PtSn-based catalysts are active for dehydrogenation of ethanol to acetaldehyde. Furthermore, PtSn-based catalysts are selective for the conversion of acetic acid to ethanol, acetaldehyde, and ethyl acetate, whereas Pt catalysts lead mainly to decomposition products such as CH4 and CO. These results are interpreted using density functional theory (DFT) calculations for various adsorbed species and transition states on Pt(111) and Pt3Sn(111) surfaces. The Pt3Sn alloy slab was selected for DFT studies because results from in situ (119)Sn M?ssbauer spectroscopy and CO adsorption microcalorimetry of silica-supported Pt/Sn catalysts indicate that Pt-Sn alloy is the major phase present. Accordingly, results from DFT calculations show that transition-state energies for C-O and C-C bond cleavage in ethanol-derived species increase by 25-60 kJ/mol on Pt3Sn(111) compared to Pt(111), whereas energies of transition states for dehydrogenation reactions increase by only 5-10 kJ/mol. Results from DFT calculations show that transition-state energies for CH3CO-OH bond cleavage increase by only 12 kJ/mol on Pt3Sn(111) compared to Pt(111). The suppression of C-C bond cleavage in ethanol and acetic acid upon addition of Sn to Pt is also confirmed by microcalorimetric and infrared spectroscopic measurements at 300 K of the interactions of ethanol and acetic acid with Pt and PtSn on a silica support that had been silylated to remove silanol groups.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

Surface chemistry of CN bond formation from carbon and nitrogen atoms on Pt(111)

The mechanism of CN bond formation from CH3 and NH3 fragments adsorbed on Pt(111) was investigated with reflection absorption infrared spectroscopy (RAIRS), temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). The surface chemistry of carbon-nitrogen coupling is of fundamental importance to catalytic processes such as the industrial-scale synthesis of HCN from CH4 and NH3 over Pt. Since neither CH4 nor NH3 thermally dissociate on Pt(111) under ultrahigh vacuum (UHV) conditions, the relevant surface intermediates were generated through the thermal decomposition of CH3I and the electron-induced dissociation of NH3. The presence of surface CN is detected with TPD through HCN desorption as well as with RAIRS through the appearance of the vibrational features characteristic of the aminocarbyne (CNH2) species, which is formed upon hydrogenation of surface CN at 300 K. The RAIRS results show that HCN desorption at approximately 500 K is kinetically limited by the formation of the CN bond at this temperature. High coverages of Cads suppress CN formation, but the results are not influenced by the coadsorbed I atoms. Cyanide formation is also observed from the reaction of adsorbed N atoms and carbon produced from the dissociation of ethylene.     

Photochemical preparation of poly(N-vinyl-2-pyrrolidone)-stabilized platinum colloids and their deposition on titanium dioxide

Preparation processes for Pt-deposited TiO(2) (Pt/TiO(2)) by the synthesis of Pt nanoparticles and their deposition were pursued by transmission electron microscopy, extended X-ray absorption fine structure, UV-vis spectroscopy, and Fourier transform infrared spectroscopic studies. Colloidal dispersions of Pt particles stabilized by poly(N-vinyl-2-pyrrolidone) (PVP) were photochemically synthesized in aqueous ethanol solution. The average diameter of Pt particles was estimated to be 2.0 +/- 0.5 nm, which was almost unchanged by changing the reducing agent from ethanol to methanol and 2-propanol. The PVP-stabilized Pt particles were distributed over a TiO(2) surface only by mixing the Pt colloidal dispersions and TiO(2). CO was chemically coordinated on the Pt particles on a TiO(2) surface after heat treatment was carried out in an O(2) flow at 673 K to completely remove the residual PVP on Pt/TiO(2). Hydrogen reduction at 473 K did not increase the amount of CO adsorbed on Pt sites. The Pt/TiO(2) catalyst after the oxidation treatment showed higher activity for CO photooxidation than that obtained for pure TiO(2) catalyst. The CO photooxidation rate was not unchanged by the H(2) reduction.     

Reforming of oxygenates for H2 production: correlating reactivity of ethylene glycol and ethanol on Pt(111) and Ni/Pt(111) with surface d-band center

The dehydrogenation and decarbonylation of ethylene glycol and ethanol were studied using temperature programmed desorption (TPD) on Pt(111) and Ni/Pt(111) bimetallic surfaces, as probe reactions for the reforming of oxygenates for the production of H2 for fuel cells. Ethylene glycol reacted via dehydrogenation to form CO and H2, corresponding to the desired reforming reaction, and via total decomposition to produce C(ad), O(ad), and H2. Ethanol reacted by three reaction pathways, dehydrogenation, decarbonylation, and total decomposition, producing CO, H2, CH4, C(ad), and O(ad). Surfaces prepared by deposition of a monolayer of Ni on Pt(111) at 300 K, designated Ni-Pt-Pt(111), displayed increased reforming activity compared to Pt(111), subsurface monolayer Pt-Ni-Pt(111), and thick Ni/Pt(111). Reforming activity was correlated with the d-band center of the surfaces and displayed a linear trend for both ethylene glycol and ethanol, with activity increasing as the surface d-band center moved closer to the Fermi level. This trend was opposite to that previously observed for hydrogenation reactions, where increased activity occurred on subsurface monolayers as the d-band center shifted away from the Fermi level. Extrapolation of the correlation between activity and the surface d-band center of bimetallic systems may provide useful predictions for the selection and rational design of bimetallic catalysts for the reforming of oxygenates.     

枝晶状Pt 薄膜的制备及其特殊红外效应

采用方波电位, 在10×10^-3 mol·L^-1 K₂PtCl₆+3×10^-4 mol·L^-1 PbAc₂+0.5 mol·L^-1 HClO₄溶液中, 于本体Pt 电极上电沉积制备出枝晶状Pt 薄膜. 随着沉积时间的增加, 枝晶长度逐渐由400 nm增加到900 nm, 且枝晶上的小晶粒(~10 nm大小)变得密集. 根据循环伏安(CV)曲线中氢吸脱附电量可得出Pt 薄膜具有中等粗糙度(C_r=9-36), 且电极表面的粗糙度随着沉积时间增加而增大. 观察到Pt 薄膜上吸附态CO的原位红外光谱具有明显的增强吸收效应, 当沉积时间为6 min 时所制得的枝晶Pt 电极的红外增强效应最大. CO呈现多种谱峰形状, 随着沉积时间的增加, 谱峰形状依次为左高右低的双极峰(类Fano 红外效应), 单极向下(表面增强红外吸收), 左高右低的双极峰, 单极向上(异常红外效应), 左低右高的双极峰和单极向下. 这表明纳米材料薄膜所呈现出的特殊红外性能, 与纳米材料的尺度和聚集状态等密切相关. 所制备的枝晶状Pt 薄膜有望为深入认识纳米材料的特殊红外性能提供一个良好的模型材料.     

Zn adsorption on Pd(111): ZnO and PdZn alloy formation

The adsorption and thermal desorption of Zn and ZnO on Pd(111) was studied in the temperature range between 300 and 1300 K with TDS, LEED, and CO adsorption measurements. At temperatures below 400 K, multilayer growth of Zn metal on the Pd(111) surface takes place. At a coverage of 0.75 ML of Zn, a p(2 x 2)-3Zn LEED structure is observed. Increasing the coverage to 3 ML results in a (1 x 1) LEED pattern arising from an ordered Zn multilayer on Pd(111). Thermal desorption of the Zn multilayer state leads to two distinct Zn desorption peaks: a low-temperature desorption peak (400-650 K) arising from upper Zn layers and a second peak (800-1300 K) originating from the residual 1 ML Zn overlayer, which is more strongly bound to the Pd(111) surface and blocks CO adsorption completely. Above 650 K, this Zn adlayer diffuses into the subsurface region and the surface is depleted in Zn, as can be deduced from an increased amount of CO adsorption sites. Deposition of >3 ML of Zn at 750 K leads to the formation of a well-ordered Pd-Zn alloy exhibiting a (6 x 4 square root 3/3)rect. LEED structure. CO adsorption measurements on this surface alloy indicate a high Pd surface concentration and a strong reduction of the CO adsorption energy. Deposition of Zn at T > 373 K in 10(-6) mbar of O2 leads to the formation of an epitaxial (6 x 6) ZnO overlayer on Pd(111). Dissociative desorption of ZnO from this overlayer occurs quantitatively both with respect to Zn and O2 above 750 K, providing a reliable calibration for both ZnO, Zn, and oxygen coverage.     

An exploration of the surfaces of some Pt/SiO2 catalysts using CO as an infrared spectroscopic probe

Infrared spectra in the bond-stretching, ν CO, region have been measured for CO adsorbed on an impregnated Pt/SiO₂ catalyst (16% Pt) with the aim of characterizing the adsorption sites present. This catalyst has previously been widely used for the study of the spectra from adsorbed hydrocarbons. It has relatively large metal particles, typically in the diameter range of 5 to 15 nm. Samples were studied which were hydrogen-covered, hydrogen-depleted, oxygen-covered and “mature”, the latter in the sense that the catalyst had undergone a number of repeated adsorption/desorption/re-reduction cycles. The spectra were interpreted in terms of the adsorption sites available by using recent correlations between ν CO wavenumbers and different patterns of CO metal interactions in metal clusters of structures known from X-ray crystallography.The strongest ν CO absorptions were from linearly adsorbed OCPt species, but these were relatively uninformative (maxima in the region 2087 to 2084 cm⁻¹ in all cases at saturation coverage) because strong dipolar coupling causes intensity-distortion and the merging-together of absorptions from different types of sites. Small proportions of sites, probably of an atomically rough nature from curved areas of the crystallites, gave weaker absorptions near 2050 and 2030 cm⁻¹. On the oxygen-covered surface a sharp absorption at 2099 cm⁻¹ denoted CO adsorption adjacent to sites of adsorbed oxygen.The weaker absorption bands in the ν CO bridged region were more informative. The strongest, near 1850 cm⁻¹ was correlated with 2-fold bridged species adsorbed on (111) surfaces. Weaker, overlapping features near 1880 and 1795 cm⁻¹ (separated from an overall contour with the aid of computer analysis) were correlated, respectively with 2-fold bridged species on (100) or (110) planes, and 3-fold bridged species on (111) planes. Weaker absorptions near 1700 cm⁻¹ were considered to correspond to different types of adsorption sites involving unequal interactions of CO with at least two metal atoms.The “mature” Pt/SiO₂ samples gave notably different spectra in both regions and this was tentatively attributed to the effect of residual carbon atoms on or near the Pt surface.A comparison was made of the present spectra with those previously published from similar experiments on a small-particle (ca 2 nm) Pt/SiO₂ catalyst, EUROPT-1. The spectral differences could be well accounted for in terms of the reported raft-like (111)-based morphology of the small metal particles of the EUROPT-1 catalyst.     

Promotion effects in the oxidation of CO over zeolite-supported Pt nanoparticles

Well-defined Pt-nanoparticles with an average diameter of 1 nm supported on a series of zeolite Y samples containing different monovalent (H+, Na+, K+, Rb+, and Cs+) and divalent (Mg2+, Ca2+, Sr2+, and Ba2+) cations have been used as model systems to investigate the effect of promotor elements in the oxidation of CO in excess oxygen. Time-resolved infrared spectroscopy measurements allowed us to study the temperature-programmed desorption of CO from supported Pt nanoparticles to monitor the electronic changes in the local environment of adsorbed CO. It was found that the red shift of the linear Pt-coordinated CO vibration compared to that of gas-phase CO increases with an increasing cation radius-to-charge ratio. In addition, a systematic shift from linear (L) to bridge (B) bonded CO was observed for decreasing Lewis acidity, as expressed by the Kamlet-Taft parameter alpha. A decreasing alpha results in an increasing electron charge on the framework oxygen atoms and therefore an increasing electron charge on the supported Pt nanoparticles. This observation was confirmed with X-ray absorption spectroscopy, and the intensity of the experimental Pt atomic XAFS correlates with the Lewis acidity of the cation introduced. Furthermore, it was found that the CO coverage increases with increasing electron density on the Pt nanoparticles. This increasing electron density was found to result in an increased CO oxidation activity; i.e., the T(50%) for CO oxidation decreases with decreasing alpha. In other words, basic promotors facilitate the chemisorption of CO on the Pt particles. The most promoted CO oxidation catalyst is a Pt/K-Y sample, which has a T(50%) of 390 K and a L:B intensity ratio of 2.7. The obtained results provide guidelines to design improved CO oxidation catalysts.     

Structure effects of benzene hydrogenation studied with sum frequency generation vibrational spectroscopy and kinetics on Pt(111) and Pt(100) single-crystal surfaces

Sum frequency generation (SFG) surface vibrational spectroscopy and kinetic measurements using gas chromatography have identified at least two reaction pathways for benzene hydrogenation on the Pt(100) and Pt(111) single-crystal surfaces at Torr pressures. Kinetic studies at low temperatures (310-370 K) show that benzene hydrogenation does not proceed through cyclohexene. A Langmuir-Hinshelwood-type rate law for the low-temperature reaction pathway is identified. The rate-determining step for this pathway is the addition of the first hydrogen atom to adsorbed benzene for both single-crystal surfaces, which is verified by the spectroscopic observation of adsorbed benzene at low temperatures on both the Pt(100) and Pt(111) crystal faces. Low-temperature SFG studies reveal chemisorbed and physisorbed benzene on both surfaces. At higher temperatures (370-440 K), hydrogenation of benzene to pi-allyl c-C(6)H(9) is observed only on the Pt(100) surface. Previous single-crystal studies have identified pi-allyl c-C(6)H(9) as the rate-determining step for cyclohexene hydrogenation to cyclohexane.