Specific Features of the Adsorption of Carbon Monoxide on a Smooth Polycrystalline Platinum Electrode Modified with Adsorbed Silver Atoms

The adsorption of carbon monoxide at the surface of smooth polycrystalline platinum (smPt) is studied in conditions of a preliminary accumulation of various quantities of silver (θ_Ag) on the surface. A comparison with similar data obtained previously for Pt/Pt is conducted. It is discovered that on smPt, exactly as in the case of Pt/Pt, carbon monoxide undergoes adsorption at sites that are not occupied by adsorbed silver, without forcing the preliminarily adsorbed silver out. At small and intermediate Ag_ad, as opposed to Pt/Pt, a mere two peaks are observed in a voltametric curve in the region of electrodesorption of the mixed layer on smPt. It is shown that, in the region of potentials of the first peak, there occurs practically no transition of silver into solution in the course of oxidation of the mixed layer. Specific features that characterize the behavior of the CO_ads + Ag_ad mixed layer are discussed under the assumption about an “islet” character of the adsorption of silver.     

Carbon monoxide adsorption on Pt/Pt electrodes modified with silver adatoms

Adsorption of carbon monoxide on the Pt/Pt surface in the presence of preliminarily accumulated different amounts of UPD silver (_Ag) is studied by using voltammetry, electrode washings, and analytical techniques. It is found that carbon monoxide is adsorbed only on the sites unoccupied by Ag_ad and rather than displacing the latter atoms to the noticeable extent. The fraction of carbon monoxide chemisorbed in the linear form increases with _Ag. The shape of anodic voltammetric curves and the number of peaks in the region where the mixed layer CO_ads + Ag_ad is desorbed strongly depend on the CO_ads : Ag_ad ratio; at small and medium _Ag, three and more peaks are observed. Electroanalytic detection of silver passed to solution in various potential ranges in the course of the mixed-layer oxidation allowed us to identify the processes corresponding to different peaks.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 241–246.Original Russian Text Copyright © 2005 by Maksimov, Podlovchenko.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

Discrete Silver(I)‐Palladium(II)‐Oxo Nanoclusters, {Ag4Pd13} and {Ag5Pd15}, and the Role of Metal–Metal Bonding Induced by Cation Confinement

We introduce the class of discrete silver(I)‐palladium(II)‐oxo nanoclusters with the preparation of {Ag₄Pd₁₃} and {Ag₅Pd₁₅}. Both polyanions represent the first examples of noble metal‐capped polyoxo‐noble‐metalates in a fully inorganic assembly, featuring an unprecedented host–guest mode containing hetero‐ and homometallic Ag–Pd and Ag–Ag bonding interactions. Comprehensive theoretical calculations suggest that the Ag–Pd metallic bonds originate partially from surface confinement of Ag^I guest ions onto the anionic polyoxopalladate host that is induced by strong electrostatic forces. This work opens the field of fully inorganic silver‐palladium‐oxo nanoclusters, which can be considered as discrete mixed noble metal precursors for the formation of monodisperse core–shell nanoparticles, with high relevance for catalysis.     

FTIR studies of butane, toluene and nitric oxide adsorption on Ag exchanged NaMordenite

In this work, we studied the adsorption of butane, toluene and nitric oxide on NaMordenite exchanged with different amounts of silver. The reactions that occurred when the adsorbed hydrocarbons interacted with NO and the effect of water adsorption were also addressed. Different silver species were formed after ion exchange and they were detected by TPR analysis. Highly dispersed Ag₂O particles were reduced at temperatures lower than 300 °C whereas Ag⁺ exchanged ions showed two TPR peaks, which can be ascribed to species exchanged at different mordenite sites. The TPD experiments after adsorption of NO at 25 °C showed that the only desorbed species was NO₂ which was formed by the total reduction of Ag₂O particles. When the adsorbed butane was exposed to NO (1000 ppm), isocyanate species were formed on Ag⁺ ionic sites as well as Ag⁺–(NOx)–CO species. Toluene adsorption was stronger than butane since adsorbed toluene molecules were held even at 400 °C. The characteristic bands of the aromatic ring C=C bond was observed as well as that of methyl groups interacting with Ag⁺ and Na⁺ ions. However, the appearance of carboxylic groups at temperatures above 300 °C in inert flow indicated the partial oxidation of toluene due to Ag₂O species present in the samples. After contacting adsorbed toluene with NO, different FTIR bands correspond to organic nitro-compounds, isocyanate, cyanide and isocyanide species adsorbed on Ag⁺ ions, were detected. The presence of water inhibited the formation of NO₂ species and the hydrocarbon adsorption on Na⁺ sites but did not affect the toluene-Ag⁺ interaction.     

Temperature-programmed desoprtion of H2 from the surfaces of pd/support and Pd-Ag/support catalysts (support = Al2O3, SiO2)

Thermal desorption of H₂ from the surface of Pd/support and Pd-Ag/support (support = Al₂O₃, SiO₂) catalysts has been investigated. Two wide desorption peaks can be observed for the 5% Pd/support catalyst. The presence of these peaks in the thermogram indicates that several adsorption states exist, which is the result of occurrance of different adsorption centers of specific bond strengths for hydrogen. The addition of silver to the palladium catalysts causes a considerable decrease in the size of the high temperature desorption peak. It is also worth noting that the temperature of the maximum of the desorption rate remains practically constant for all bimetallic catalysts studied. This means that the activation energy of the hydrogen desorption process does not change after the introduction of silver to the palladium catalyst.     

Triazole‐Functionalized N‐Heterocyclic Carbene Complexes of Palladium and Platinum and Efficient Aqueous Suzuki–Miyaura Coupling Reaction

Imidazolium salts bearing triazole groups are synthesized via a copper catalyzed click reaction, and the silver, palladium, and platinum complexes of their N‐heterocyclic carbenes are studied. [Ag₄(L1)₄](PF₆)₄, [Pd(L1)Cl](PF₆), [Pt(L1)Cl](PF₆) (L1=3‐((1‐benzyl‐1H‐1,2,3‐triazol‐4‐yl)methyl)‐1‐(pyrimidin‐2‐yl)‐1H‐imidazolylidene), [Pd₂(L2)₂Cl₂](PF₆)₂, and [Pd(L2)₂](PF₆)₂ (L2=1‐butyl‐3‐((1‐(pyridin‐2‐yl)‐1H‐1,2,3‐triazol‐4‐yl)methyl)imidazolylidene) have been synthesized and fully characterized by NMR, elemental analysis, and X‐ray crystallography. The silver complex [Ag₄(L1)₄](PF₆)₄ consists of a Ag₄ zigzag chain. The complexes [Pd(L1)Cl](PF₆) and [Pt(L1)Cl](PF₆), containing a nonsymmetrical NCN ′ pincer ligand, are square planar with a chloride trans to the carbene donor. [Pd₂(L2)₂Cl₂](PF₆)₂ consists of two palladium centers with CN₂Cl coordination mode, whereas the palladium in [Pd(L2)₂](PF₆)₂ is surrounded by two carbene and two triazole groups with two uncoordinated pyridines. The palladium compounds are highly active for Suzuki–Miyaura cross coupling reactions of aryl bromides and 1,1‐dibromo‐1‐alkenes in neat water under an air atmosphere.     

The Interaction of Oxygen with Silver Powders. A Comparison Between Esca Results and Volumetric Measurement

Interactions of oxygen with silver powders have been studied with a combination of angle-resolved ESCA and volumetric adsorption. Three states of adsorbed oxygen, i.e., atomically adsorbed oxygen, dissolved oxygen, and surface oxide, are characterized by 0(1s)-ESCA peaks at binding energies of 530.2, 532.0, and 529.3 eV respectivcly. The ESCA studies also suggest that atomically adsorbed oxygen dissolves into the subsurface of silver powders at temperatures above 100 °C, and then transforms into oxide (Ag₂O) at 175 °C. Adsorbed oxygen on the silver powders was partially desorbed at temperatures higher than 180 °C. The transformation and desorption information obtained from ESCA satisfactorily explains the variation of the adsorption isotherm with temperature obtained from the volumetric adsorption of oxygen on Ag/SiO₂ catalysts.     

Specific features of the formation of co-adsorption layers on metal surfaces with the participation of simple molecules: NH<Subscript>3</Subscript> + CO on Pt(111)

The co-adsorption of ammonia and carbon monoxide on the Pt(111) surface was studied at temperatures <300 K using high-resolution electron energy loss spectroscopy (HREELS). The state of ammonia and carbon monoxide molecules in the co-adsorption layer was established to differ significantly from their state in individual adsorption layers. The adsorption of CO on a clean surface occurs with the primary filling of single-bound terminal sites, whereas the bridging sites are filled preferably by CO molecules in the presence of NH_3,ads. The symmetry axis of ammonia molecules adsorbed on the clean surface is parallel to the normal to the surface, whereas in the co-adsorption layers the interaction with CO_ads molecules results in the deviation of the symmetry axis toward the surface. Presumably, the observed changes in the state of adsorbed molecules are due to the donor-acceptor interaction inducing the electron density transfer from ammonia molecules across the metal surface to CO molecules.     

Application of Statistical Lattice Models to the Analysis of Oscillatory and Autowave Processes in the Reaction of Carbon Monoxide Oxidation over Platinum and Palladium Surfaces

Statistical lattice models which imitate oscillatory and wave dynamics in the adsorbed layer during of carbon monoxide oxidation over Pt(100) and Pd(110) single crystals differing in the mechanism of autooscillation formation are compared. In the case of platinum, oscillations are due to phase transitions of the catalyst surface structure and surface reconstruction under the action of the reaction medium. In the case of palladium, the driving force of oscillations is phase transitions in the adsorbed layers on the catalyst surface, namely, the reversible formation of subsurface oxygen in the course of the reaction, which modifies the adsorption and catalytic properties of the surface. It is shown that, according to the proposed models, a change in the coverages (CO_ads O_ads) in the autooscillation regimes occurs via the formation of a surface wave whose front is characterized by the high concentration of catalytically active sites that provide the maximal rate of CO₂ molecule formation. Under certain conditions, the formation of various spatiotemporal structures is observed in simulation experiments.     

Investigation of ion adsorption on silver sulfide,iodide and bromide precipitates by the radioactive tracer technique

The radioactive tracer method was used to investigate the adsorption of iodide and europium ions from aqueous solution on dried isoelectric precipitates of silver sulfide, silver iodide and silver bromide. The relationship between the amount of iodide ions adsorbed on Ag₂S and the iodide ion and HNO₃ concentrations in the solution was determined. It was shown that the iodide ions adsorbed on Ag₂S could be desorbed with sulfide ions. Using Ag₂S, AgI and AgBr precipitates, a relationship between the europium ion adsorption and Eu(NO₃)₃, H₂S, NaI, NaBr and NaCl concentration in solution was established. The adsorption of europium ions was also assessed in respect to the presence of lanthanum and barium ions. For adsorption measurement iodide and europium ions were labeled with their radioactive isotopes and the amounts adsorbed were determined from the measured radioactivities of the precipitates after reaching the equilibrium between the solid phase and the solution.     

Determining Magnitude of the Carbon Monoxide Adsorption on Electrodes of Platinum Metals

The possibility of using current transients and open-circuit potential for correctly calculating a double-layer correction for charges spent for electrooxidation of adsorbed carbon monoxide is considered. On the basis of electrochemical measurements of adsorption of CO on electrolytic deposits of Pt and Rh in solutions of H₂SO₄, H₂SO₄ + HCl, and HCl, an estimate of the magnitude of adsorption of CO is performed with allowance made for a correct double-layer correction. The obtained values are compared with similar literature data for smooth Pt and Rh, and possible reasons for the established differences are discussed.     

A DFT Investigation of Surface‐Enhanced Raman Scattering of Adenine and 2′‐Deoxyadenosine 5′‐Monophosphate on Ag20 Nanoclusters

We present a detailed analysis of the surface‐enhanced Raman scattering (SERS) of adenine and 2′‐deoxyadenosine 5′‐monophosphate (dAMP) adsorbed on an Ag₂₀ cluster by using density functional theory. Calculated Raman spectra show that spectral features of all complexes depend greatly on adsorption sites of adenine and dAMP. The complexes consisting of adenine adsorbed on the Ag₂₀ cluster through N3 reproduce the measured SERS spectra in silver colloids, and thus demonstrated that adenine interacts with the silver surface via N3. We also investigate the SERS spectrum of adenine at the junction between two Ag₂₀ clusters and demonstrate that adenine can bind to the clusters through N3 and the external amino group, while dAMP can be adsorbed on the cluster in an end‐on orientation with the ribose and phosphate groups near to or away from the silver cluster. In contrast to the adenine–Ag₂₀ complexes, the dAMP–Ag₂₀ complexes produce new and strong bands in the low‐ or high‐wavenumber region of the Raman spectra, due to vibrations of the ribose and phosphate groups. Furthermore, the spectrum of dAMP bound to the Ag₂₀ cluster via N7 approaches the experimental SERS spectra on silver colloids.     

A Theoretical Study of the Interaction of Hydrogen and Oxygen with Palladium or Gold Adsorbed on Pyridine‐Like Nitrogen‐Doped Graphene

The interaction of H₂ and O₂ molecules in the presence of nitrogen‐doped graphene decorated with either a palladium or gold atom was investigated by using density functional theory. It was found that two hydrogen molecules were adsorbed on the palladium atom. The interaction of these adsorbed hydrogen molecules with two oxygen molecules generates two hydrogen peroxide molecules first through a Eley–Rideal mechanism and then through a Langmuir–Hinshelwood mechanism. The barrier energies for this reaction were small; therefore, we expect that this process may occur spontaneously at room temperature. In the case of gold, a single hydrogen molecule is adsorbed and dissociated on the metal atom. The interaction of the dissociated hydrogen molecule on the surface with one oxygen molecule generates a water molecule. The competitive adsorption between oxygen and hydrogen molecules slightly favors oxygen adsorption.     

Kinetically Limited CO Adsorption: Spill-Over as a Highly Effective Adsorption Pathway on Bimetallic Surfaces

We demonstrate that the (local) adsorbed carbon monoxide, CO_ad, coverage on the Pt-free areas of bimetallic Pt/Ru(0001) surfaces (a Ru(0001) substrate partly covered by Pt monolayer islands) can be increased to ∼0.80 monolayers (ML), well above the established saturation CO_ad coverage of 0.68 ML, even under ultrahigh vacuum conditions by using spill-over of CO adsorbed on the Pt islands to the Ru areas as an highly effective adsorption channel. The apparent CO_ad saturation coverage of 0.68 ML on pure Ru(0001) is identified as due to kinetic limitations, hindering further uptake from the gas phase, rather than being caused by thermodynamic reasons. This spill-over mechanism is proposed to be a general phenomenon for adsorption on bimetallic surfaces.     

Study of sorption of platinum and palladium cyanometallate complexes as the key to understanding the mechanism of binding the [Au(CN)<Subscript>2</Subscript>]<Superscript>−</Superscript> anion with carbon adsorbents

Goldcarb WSC-207C GR activated carbons with platinum and palladium complexes adsorbed from aqueous solutions of K₂[Pt(CN)₄], K₂[Pt(CN)₆], and K₂[Pd(CN)₄] were studied by the methods of X-ray photoelectron spectroscopy and IR spectroscopy with Fourier transformation, and also by MALDI massspectrometry. Platinum and palladium cyanide complexes are not reduced onto surface of active charcoal while adsorption. A certain part of the [Pd(CN)⁴]²⁻ and [Pt(CN)₄]²⁻ anions directly bound to active centers on the activated carbon is oxidized more deeply and functions as particles-anchors, forming oligomers resembling Krogmann salt. A correspondence between the structure of the complex cyanometallate ion and a mode of its binding with active carbon is found. The adsorption of complex species with a linear structure or a square planar structure is defined by a possibility of the formation of donor-acceptor and metallophilic bonds. The mode of the anion [Au(CN)₂]⁻ binding with the surface of active carbon was considered.     

CO and methanol adsorption on (2 × 1)Pt(110) and ion‐eroded Pt(111) model catalysts

Methanol adsorption on ion‐sputtered Pt(111) surface exhibiting high concentration of vacancy islands and on (2 × 1)Pt(110) single crystal were investigated by means of photoelectron spectroscopy (PES) and thermal desorption spectroscopy. The measurements showed that methanol adsorbed at low temperature on sputtered Pt(111) and on (2 × 1)Pt(110) surfaces decomposed upon heating. The PES data of methanol adsorption were compared to the data of CO adsorbed on the same Pt single crystal surfaces. In the case of the sputtered Pt(111) surface, the dehydrogenation of H_xCO intermediates is followed by the CO bond breakage. On the (2 × 1)Pt(110) surface, carbon monoxide, as product of methanol decomposition, desorbed molecularly without appearance of any traces of atomic carbon. By comparing both platinum surfaces we conclude that methanol decomposition occurs at higher temperature on sputtered Pt(111) than on (2 × 1)Pt(110). Copyright © 2010 John Wiley & Sons, Ltd.     

Characteristics of the Oxidation of Carbon Monoxide on Platinum and Palladium Acetylacetonates Immobilized on a Silica Surface

Characteristics of the kinetics of the oxidation of carbon monoxide on acetylacetonates of palladium and platinum immobilized on a silica surface have been studied. The bound metal complexes show no hysteresis in the dependence of the rate of reaction on the concentration of CO and O₂ and have a higher catalytic activity than Pt/SiO₂ and Pd/SiO₂. A mechanism is proposed for the oxidation of carbon monoxide on platinum and palladium complexes bound to a SiO₂ surface.     

Force constants and bond polarizabilities of thiocyanate ion adsorbed on the silver electrode as interpreted from the surface enhanced Raman scattering

The surface enhanced Raman spectra of the thiocyanate ion is studied in two ways. First, normal mode analysis is employed to determine the force constants of the adsorbed thiocyanate ion. The result shows that the force constant for the CN bond becomes larger while that for the SC bond smaller in the adsorbed state. The adatom model with an effective silver mass of 0.1 m_Ag (m_Ag being the mass of the silver atom) is adequate for the analysis. This implies that the silver adatom is bound to the bulk electrode surface. The adsorption is also shown to be physical. Second, the SER intensifies are analyzed to obtain the molecular polarizability derivatives. The result shows that the polarizability derivative of the CN stretching motion is most responsive to the applied voltage. The polarizability derivative of the SC stretching motion is much smaller than that of the CN bond as compared in the solution. This conclusion is attributed to the adsorption center at the sulfur atom. In general, molecular polarizability derivatives are functions of the frequencies of the exciting lasers and the applied voltages on the electrode.     

Electrocatalytic oxidation of carbon monoxide and methanol at Pt nanoparticles confined in SBA-15: voltammetric and in situ infrared spectroscopic studies

Electrocatalytic oxidation of carbon monoxide and methanol at Pt nanoparticles confined in mesoporous molecular sieve SBA-15 was studied by using cyclic voltammetry and in situ FTIR spectroscopy. Cyclic voltammetric studies revealed that the Pt nanoparticles confined in SBA-15 exhibit a high activity in the presence of hydrated phase consisting of SiO₂ in the SBA-15. In situ FTIR spectroscopy results discovered that IR absorption of CO adsorbed on Pt nanoparticles confined in SBA-15 has been enhanced 11-fold, and the full-width at half-maximum of the CO band is significantly increased, in comparison with IR feature of CO adsorbed on a bulk Pt electrode. The linearly adsorbed CO species is the only intermediate derived from dissociative adsorption of methanol, which is more readily oxidized to form CO₂ in the aid of the active oxide in SBA-15.This paper is dedicated to Professor G. Horanyi on the occasion of his 70th birthday and in recognition of his outstanding contribution to electrochemistry     

A spectroscopic proof of a surface equilibrium between on top and bridge bonded CO at Pt(1 1 0) in acid solution

According to most of works in the literature, adsorbed carbon monoxide at Pt(1 1 0) electrodes in acid media presents only linear bonded (CO_L) so-called, atop geometry. In the present work, the formation of bridge bonded carbon monoxide (CO_B) is shown via in situ infrared FT spectra, measured on a Pt(1 1 0) electrode covered with 25% CO, in HClO₄ solutions. For the first time, the inter conversion between atop and bridge bonded CO at potentials in the hydrogen adsorption region is reported in acid solution. Band intensity and band center frequency indicate dipole–dipole coupling effects in spite of the low CO total coverage.