Triisobutylaluminum as cocatalyst for zirconocenes. I. Sterically opened zirconocene/triisobutylaluminum/perfluorophenylborate as highly effective ternary catalytic system for synthesis of low molecular weight polyethylenes

Ethylene polymerizations with catalytic systems Me₂SiCp*N^tBuZrX₂ ( 1 ) [Cp* = C₅(CH₃)₄; X = Cl ( 1Cl ), Me ( 1Me )], triisobutylaluminum (TIBA), perfluorophenylborate CatB(C₆F₅)₄ [Cat = CPh₃ ( 3 ), Me₂NHPh ( 4 )], or Me₂SiCp₂ZrX₂ [X = Cl ( 2Cl ), Me ( 2Me )]/TIBA/ 3 ( 4 ) were performed within a wide range of ethylene pressures of different Al/Zr ratios, and Zr/B = 1. Catalytic systems 1Cl ( 2Cl )/TIBA/ 3 led to the formation of very high linear molecular weight polyethylene (PE) of M_η ∼2,000,000 with low activity. The replacement of both chlorine ligands in the precatalyst for the methyl ones led to the formation of active species producing low molecular weight PE with high activity. Chain transfer to ethylene was shown to be the main reaction controlling PE chain propagation: k_p/k_tr ∼20–30 for 1Me /TIBA/ 3 and k_p/k_tr ∼350–500 for 2Me /TIBA/ 3 . It was suggested that TIBA was present in the active center first in the form of a neutral heterobimetallic Zr–Al bridged complex followed by the formation of a partially polarized Zr–Al(Cl)R₂ (R = ⁱBu) or an unreactive Zr–AlR₃ cationic complex by abstraction of the alkyl ligand under the action of borate. It was concluded that AlR₃ from the latter cationic complex may be easily reversibly replaced under the specific coordination of ethylene or accumulated α-olefin, giving rise to highly labile and sterically accessible cationic species. Experiments on ethylene polymerization with the catalytic systems 1Cl ( 1Me )/TIBA/ 3 /Ph₂NH, 1Cl ( 1Me )/TIBA/ 4, 2Cl ( 2Me )/TIBA/ 3 /Ph₂NH, and 2Cl ( 2Me )/TIBA/ 4 were performed to confirm the suggestion. Catalytic systems derived from dichloride complexes in the presence of a σ-donor substrate also produced low molecular weight PEs with molecular weight characteristics similar to those of products obtained with the dimethylated precatalysts. The specific feature of active species derived from 2Me complexes to isomerize coordinated α-olefin into trans-vinylene polymer chains was also revealed. The catalytic behavior of the ternary catalytic system based on 2Me relative to 2Me or 2Cl precatalysts activated with polymethylaluminoxane at different Al/Zr ratios was compared. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1901–1914, 2001     

Triisobutylaluminum as cocatalyst for zirconocenes. II. Triisobutylaluminum as a component of a cocatalyst system and as an effective cocatalyst for olefin polymerization derived from dimethylated zirconocenes

An investigation of the catalytic behavior of the dimethylated zirconocenes Me₂SiCp*N^tBuZrMe₂ [Cp* = C₅(CH₃)₄; 1Me ], Me₂SiCp₂ZrMe₂ ( 2Me ), Cp₂ZrMe₂ ( 3Me ), Ind₂ZrMe₂ ( 4Me ), Me₂SiInd₂ZrMe₂ ( 5Me ), Et(2-MeInd)₂ZrMe₂ ( 6Me ), and Me₂Si(2-MeInd)₂ZrMe₂ ( 7Me ) with the combined activator triisobutylaluminum (TIBA)/CPh₃B(C₆F₅)₄ (Al/Zr = 250; B/Zr = 1) in ethylene polymerizations at increased monomer pressures (5–11 bar, 30 °C) was carried out. Sterically opened zirconocenes in ternary catalysts gave rise to active species effective in the formation of low molecular weight polyethylenes (PEs). These active species tended to increase the PE molecular weight [ 1Me (2100) < 2Me (20,000) < 5Me (89,000) < 3Me (94,500)] under similar conditions. PE obtained with 4Me showed a bimodal gel permeation chromatography curve with a 64% peak area [weight-average molecular weight (M_w) = 43,000] and a 36% peak area (M_w = 255,000). The increase in sterical demands from the zirconocenes was also demonstrated by the reduction of the chain transfer to monomer, the reinsertion of vinyl-ended PE chains, and their ability for isomerization. These reactions were most pronounced for the zirconocenes 1Me and 2Me . The active species responsible for the formation of low molecular weight PEs deactivated quickly. The zirconocenes 6Me , 7Me , and (2-PhInd)₂ZrMe₂ ( 8Me ) bearing substituent at the 2-position of the indenyl ring was activated with TIBA alone, yielding active species effective in ethylene and propylene polymerizations. PEs formed with 6Me – 8Me complexes activated with TIBA had high molecular weights. An increase in the Al/Zr ratio in the catalytic system 8Me /TIBA from 50 to 300 led to an enhancement of the molecular weight of polypropylene (PP) samples from oligomeric products to an viscosity-average molecular weight of 220,000. The increase in the molecular weights of PPs with an increase in the propylene concentration was also observed. An analysis of the catalytic performance of the 8Me /TIBA system showed first-order dependency of the initial polymerization rates on the TIBA concentration and close to second-order dependency on propylene. The second-order dependency on the monomer concentration is explained in terms of the monomer participation in the initiation step of the polymerization reaction. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1915–1930, 2001     

Effect of substituents on the catalytic properties of bis(cyclopentadienyl)zirconium dichloride complexes with polymethylaluminoxane and AlBu1 3/CPh3B(C6F5)4 cocatalysts in ethylene polymerization

The catalytic properties of the complexes (RCp)₂ZrCl₂ (R=H, Me, Prⁱ, Buⁿ, Buⁱ, Me₃Si,cyclo-C₆H₁₁), and Me₂SiCp^*NBuⁱZrCl₂ (Cp^*=C₅(CH₃)₄) combined with the AlBuⁱ ₃−CPh₃B(C₆F₅)₄ cocatalyst in ethylene polymerization were studied. The specific activity of the substituted bis-cyclopentadienyl complexes decreases in the sequence: Me>Prⁱ>Buⁿ>Buⁱ>Me₃Si>cyclo-C₆H₁₁, which corresponds to the activity sequence for these complexes activated by polymethylaluminoxane (MAO) but is 4–20 times lower in absolute value. Comparison of the polyethylene samples obtained in the presence of the same complexes with MAO and AlBuⁱ ₃−CPh₃B(C₆F₅)₄ cocatalysts showed that polyethylene with much higher molecular mass, melting point, and crystallinity is formed in the presence of the ternary catalytic systems, and this indicates a different nature of the active sites of the catalytic systems. The effective activation energy of polymerization (≈3.6 kcal mol⁻¹), first order with respect to monomer and ≈0.4 order with respect to organoaluminum component, was found for the (PrⁱCo)₂ZrCl₂−AlBuⁱ ₃−CPh₃B(C₆F₅)₄ catalytic system. It was proposed on the basis of the kinetic data that AlⁱBu₃ enters into the composition of the active site to form a bridged heteronuclear cationic complex. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp 301–307, February, 2000.     

Electrochemistry of bis(indenyl)dimethylzirconium complex—the precursor of the olefin polymerization catalyst

The reduction in THF and oxidation in CH₂Cl₂ of the bent-sandwich complex (η⁵-lnd)₂ZrMe₂ (1) (Ind=C₉H₇, indenyl) were studied by cyclic voltammetry. Complex1 in THF undergoes one-electron reduction to radical anion1 ⁻, which partially decomposes with the liberation of the Ind⁻ anion. Even at −45°C the one-electron oxidation leads to the formation of an unstable 15-electron radical cation undergoing fast heterolytic decomposition to the Me^• radical and (η⁵-lnd)₂ZrMe² cation, which is the key reaction center in the catalytic polymerization of olefins. Comparative analysis of electron-transfer-induced transformations of bent-sandwich dimethyl and dichloride zirconocenes of the general formula L₂ZrX₂ (L=η⁵-lnd, η⁵-Cp: X=Xl, Me) was performed. The material of the paper was first reported at the 195th Meeting of the Electrochemical Society (see Ref. 1). Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 59–62, January, 2000.     

乙烯聚合水杨醛亚胺锆配合物的合成、结构和固定化

合成和表征了2个锆的配合物：Bis[N-(3-tert-butylsalicylidene) allylaminato] zirconium dichloride (4)和Bis[N-(3-tert-butylsali-cylidene)-iso-butylaminato] zirconium dichloride (5)，并且得到了配合物4的单晶结构。在引发剂的作用下，配合物4和苯乙烯进行自由基共聚，得到高分子化催化剂6。在助催化剂MMAO的存在下，4，5和6都可以催化乙烯聚合。最高活性为3.7×10⁶ g PE·(mol Zr)^-1·h^-1。     

Synthesis of dicationic μ-diborolyl triple-decker complexes [CpCo(μ-1,3-C<Subscript>3</Subscript>B<Subscript>2</Subscript>Me<Subscript>5</Subscript>)M(C<Subscript>6</Subscript>H<Subscript>6</Subscript>)]<Superscript>2+</Superscript> (M = Rh,Ir)

Dicationic triple-decker complexes [CpCo(μ-1,3-C₃B₂Me₅)M(C₆H₆)]²⁺ (M = Rh (3), Ir (4)) were synthesized by the reaction of [CpCo(μ-C₃B₂Me₅)MBr₂]₂ (M = Rh, Ir) with benzene in the presence of AgBF₄. The structure of 3(BF₄)₂ was determined by X-ray diffraction analysis.     

Synthesis and structures of cationic μ-diborolyl triple-decker complexes [CpCo(1,3-C<Subscript>3</Subscript>B<Subscript>2</Subscript>Me<Subscript>5</Subscript>)M(C<Subscript>5</Subscript>R<Subscript>5</Subscript>)]<Superscript>+</Superscript> (M = Rh or Ir)

The cationic triple-decker complexes [CpCo(1,3-C₃B₂Me₅)M(C₅R₅)]⁺ (M = Rh (2), Ir (3), R = H (a), Me (b)) with the bridging diborolyl ligand were synthesized by the reaction of the sandwich anion [CpCo(1,3-C₃B₂Me₅)]^- (1) with the halide complexes [CpMI₂]₂ or [Cp^*MCl₂]₂ (Cp^* = C₅Me₅). The structures of [2b]PF₆ and [3b]PF₆ were established by X-ray diffraction. The nature of the metal—diborolyl bond in these complexes was analyzed using the energy decomposition scheme.     

Effects of ethylene polymerization conditions on the activity of SiO2-supported zirconocene and on polymer properties

The effects of polymerization conditions were evaluated on the production of polyethylene by silica-supported (n-BuCp)₂ZrCl₂ grafted under optimized conditions and cocatalyzed by methylaluminoxane (MAO). The Al : Zr molar ratio, reaction temperature, monomer pressure, and the age and concentration of the catalyst were systematically varied. Most reactions were performed in toluene. Hexane, with the addition of triisobutilaluminum (TIBA) to MAO, was also tested as a polymerization solvent for both homogeneous and heterogeneous catalyst systems. Polymerization reactions in hexane showed their highest activities with MAO : TIBA ratios of 3 : 1 and 1 : 1 for the homogeneous and supported systems, respectively. Catalyst activity increased continuously as Al : Zr molar ratios increased from 0 to 2000, and remained constant up to 5000. The highest activity was observed at 333 K. High monomer pressures (≈ 4 atm) appeared to stabilize active species during polymerization, producing polyethylenes with high molecular weight (≈ 3 × 10⁵ g mol⁻¹). Catalyst concentration had no significant effect on polymerization activity or polymer properties. Catalyst aging under inert atmosphere was evaluated over 6 months; a pronounced reduction in catalyst activity [from 20 to 13 × 10⁵ g PE (mol Zr h)⁻¹] was observed only after the first two days following preparation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1987–1996, 1999     

Novel titanium complexes bearing two chelating phenoxy‐imine ligands and their catalytic performance for ethylene polymerization

Three substituted salicylaldimine ligands ( 1a, 2a, 3a ) and their titanium complexes bis[N‐(5‐nitrosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 1 ), bis[N‐(5‐chlorosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 2 ) and bis[N‐(5‐bromosalicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 3 ) were synthesized and characterized by mass spectra, ¹H NMR and elemental analyses, as well as complex 1 by X‐ray structure analysis. In the presence of methylaluminoxane (MAO), 1, 2 and 3 are efficient catalysts for ethylene polymerization in toluene. Under the conditions of T = 60 °C, p = 0.2 MPa, and n(MAO)/n(cat) = 1500, the activities of 1–3 reached 4.55–8.80 × 10⁶ g of PE (mol of Ti h bar)^?1, which is much higher than that of the unsubstituted complex bis[N‐(salicylidene)‐2,6‐diisopropylanilinato]titanium(IV)dichloride ( 4 ). The viscosity‐average molecular weight of polyethylene ranged from 24.8 × 10⁴ to 44.9 × 10⁴ g/mol for 1–3 and the molecular weight distribution M_w/M_n from 1.85 to 2.34. The effects of reaction conditions on the polymerization were examined in detail. The increase in ethylene pressure and rise in polymerization temperature are favorable for 1–3 /MAO to rise the catalytic activity and the molecular weight of polyethylene. Copyright © 2007 John Wiley & Sons, Ltd.     

Activation of Metallacyclopropenes,five-membered Metallacyclocumulenes and Metallacyclopentynes of Zirconium with iBu2AlH

The recently described reaction products of zirconacyclopropenes Cp^′₂Zr(η²-Me₃SiC₂SiMe₃) and five-membered zirconacyclocumulenes (zirconacyclopenta-2,3,4-trienes) Cp*₂Zr(η⁴-1,2,3,4-RC₄R), Cp* = η⁵-pentamethylcyclopentadienyl, R = Me, Me₃Si and Ph, with i-Bu₂AlH are active catalysts in the polymerization of ethylene and in the ring opening polymerization of ε-caprolactone. Here we describe the different activity of these complexes after thermal activation or if additional i-Bu₂AlH together with water are added. These results are compared to those which were obtained with the complexes Cp₂Zr(η⁴-1,2,3,4-H₂C₄H₂), rac-(EBTHI)ZrF₂, rac-(EBTHI)ZrCl₂, [rac-(EBTHI)Zr(H)(µ-H)]₂ and rac (EBTHI)Zr(F)CH₂-CH₂(2-Py) after activation with i-Bu₂AlH together with water.     

Synthesis,characterization, structures,and DFT study of zinc(II) complexes with tributylphosphine chalcogenides

Four new zinc(II) complexes of the type [ZnCl₂(n-Bu₃PE)₂] (E=O (1), S (2), Se (3), or Te (4)) have been synthesized from zinc(II) chloride and the ligands n-Bu₃PE giving yields of 56–88%. The adducts were characterized by multinuclear (³¹P, ¹³C, and ⁷⁷Se) NMR, conductivity, IR spectroscopy and by X-ray analyses. Zinc complexes 1–4 are compriseS of two ligands coordinated to the metal center in a distorted tetrahedral arrangement. The P=E bond lengths of 1.497(7) (E=O), 2.000(4) (E=S), and 2.178(2) Å (E=Se) in these complexes are slightly elongated compared to those in the free ligand. In addition, a DFT/B3LYP theoretical study on the geometry optimization of the title ligands and their zinc complexes has been carried out in order to support and complement the experimental data and to further investigate the nature of the chalcogenide-metal interaction. The results show good agreement between the experimental and theoretical data.     

Effect of the nature of an organoaluminum activator on catalytic properties of phenoxyimine zirconium complexes in homo- and copolymerization reactions of ethylene

Catalytic properties of the phenoxyimine zirconium complexes, viz., bis[N-(3,5-di-tert-butylsalicylidene)anilinato]zirconium(IV) dichloride (1) and its fluorinated analog, bis[N-(3,5-di-tert-butylsalicylidene)-2,3,5,6-tetrafluoroanilinato]zirconium(IV) dichloride (2), were studied. Ethylene homopolymerization and copolymerization of ethylene with α-olefins were chosen as catalytic reactions, and various organoaluminum compounds served as activators: commercial polymethylalumoxane (MAO) containing ∼35 mol.% of trimethylaluminum (TMA), MAO purified from TMA (“dry” MAO), and “classical” organoaluminum compounds, namely, TMA and triisobutylaluminum (TIBA). Complex 1 is not activated by “dry” MAO but is efficiently transformed into the catalytically active state by commercial MAO, “conventional” TMA, and TIBA. These processes give low-molecular-weight polyethylenes (PE) characterized by high values of polydispersity indices and by polymodal curves of gel permeation chromatography (GPC). The order of decreasing the efficiency of activation for the cocatalysts is MAO > TIBA > TMA. Fluorinated complex 2 exhibits a high activity after its treatment with MAO and “dry” MAO, the activity is much lower upon mixing with TIBA, and complex 2 is inactive when using TMA. In the copolymerization of ethylene with hex-1-ene and dec-1-ene, complex 1 treated with MAO is highly active but gives a low level of insertion of the comonomer (1–2 mol.% in the copolymer). Complex 2 activated with “dry” MAO is more efficient in the copolymerization of ethylene with propylene or hex-1-ene but, like complex 1, it does not produce copolymers with a high content of the comonomer. The both catalysts provide the insertion of α-olefin as isolated units separated by extended sections of the chain consisting of ethylene units.     

Synthesis and structures of adamantyl-substituted constrained geometry cyclopentadienyl-phenoxytitanium complexes and their catalytic properties for olefin polymerization

A number of new constrained geometry titanium complexes, [η⁵: η¹-2-C₅Me₄-4-R-6-Ad-C₆H₂O]TiCl₂ [Ad = adamantyl, R = Me (8), ^tBu (9)] and [η⁵: η¹-C₅H₂Ph₂-4-^tBu-6-Ad-C₆H₂O]TiCl₂ (10), were synthesized from reactions of TiCl₄ either directly with corresponding free ligands, 2-C₅Me₄H-4-R-6-Ad-C₆H₂OH [R = Me (5), ^tBu (6)], or with the dilithium salt of the free ligand 2-C₅H₃Ph₂-4-^tBu-6-Ad-C₆H₂OH (7). These new titanium complexes were fully characterized by ¹H and ¹³C NMR spectroscopy and elemental analyses, and the molecular structures of 8 and 9 were determined by single-crystal X-ray crystallography. Upon activation with AlⁱBu₃ and Ph₃CB(C₆F₅)₄ (TIBA/B), these complexes exhibit high catalytic activity for 5-ethylidene-2-norbornene (ENB) polymerization as well as ethylene/1-hexene and ethylene/ENB copolymerization with good tacticity-control ability for the ENB polymerization and high comonomer incorporation ability for the copolymerization reactions. It was found that the bulky adamantyl substituent at the ortho position of the phenoxy group in the ligands of these complexes apparently influences the molecular weight and the microstructure of the resultant polymers.     

Synthesis of μ-diborolyl triple-decker complexes [CpCo(1,3-C<Subscript>3</Subscript>B<Subscript>2</Subscript>Me<Subscript>5</Subscript>)Ru(arene)]<Superscript>+</Superscript>

Cationic triple-decker complexes [CpCo(1,3-C₃B₂Me₅)Ru(arene)]PF₆ (arene is benzene (2a), p-cymene (2b)) with a bridging diborolyl ligand were synthesized by the reaction of the sand-wich anion [CpCo(1,3-C₃B₂Me₅)]⁻ (1) with [(arene)RuCl₂]₂. The structure of [2b]PF₆ was confirmed by X-ray diffraction analysis.     

Homolysis of the Ln-N bond: Synthesis, characterization and catalytic activity of organolanthanide(II) complexes with 2-pyridylmethyl and 3-pyridylmethyl-functionalized indenyl ligands

Two series of new organolanthanide(II) complexes with general formula {η⁵:η¹-[1-R-3-(2-C₅H₄NCH₂)C₉H₅]}₂Ln(II) (R = H-, Ln = Yb (3), Eu (4); R = Me₃Si-, Ln = Yb (5), Eu (6)), and {η⁵:η¹-[1-R-3-(3-C₅H₄NCH₂)C₉H₅]}₂Ln(II) (R = H-, Ln = Yb (9), Eu (10); R = Me₃Si-, Ln = Yb (11), Eu (12)) were synthesized by silylamine elimination with one-electron reductive reactions of lanthanide(III) amides [(Me₃Si)₂N]₃Ln(μ-Cl)Li(THF)₃ (Ln = Yb, Eu) with 2 equiv. 1-R-3-(2-C₅H₄NCH₂)C₉H₆ (R = H (1), Me₃Si- (2)) or 1-R-3-(3-C₅H₄NCH₂)C₉H₆ (R = H (7), Me₃Si- (8)) in good yields. All the complexes were fully characterized by elemental analyses and spectroscopic methods. Complexes 3 and 5 were additionally characterized by single-crystal X-ray diffraction study. The catalytic activities of the complexes for MMA polymerization were examined. It was found that complexes with 3-pyridylmethyl substituent on the indenyl ligands could function as single-component MMA polymerization catalysts with good activities, while the complexes with 2-pyridylmethyl substituent on the indenyl ligands cannot catalyze MMA polymerization. The temperatures and solvents effect on the MMA polymerization have also been examined.     

Heptane-soluble homogeneous zirconocene catalyst: Synthesis of a single diastereomer,polymerization catalysis,and effect of silica supports

Bis(1-indenyl)-di[1′S, 2′R, 5′S)-methoxy]silane ( 1 ) was converted into a mixture of corresponding ansa-diastereomeric zirconocenes. Further purification afforded a single dia-stereomer, di[(1′S, 2′R, 5′S)-methoxy] silylene-bis[η⁵-1(R, R)-(+)-indenyl] dichlorozirconium ( 2 ), which is optically active and hydrocarbon soluble. Extremely rapid ethylene, propylene, and ethylene-hexene polymerizations were observed both in toluene and n-heptane solutions; for instance, at 50°C, activity for ethylene polymerization reaches ～ 1.5×10¹⁰ (g of PE/((mol of Zr) · [C₂H₄] · h). The “bare” zirconocenium ion generated from 2/TIBA/Ph₃CB(C₆F₅)₄ exhibits unusual polymerization behaviors; the polymerization activity increases monotonically with temperature of polymerization (T_p) up to a conventional polymerization condition (50–70°C), and the ¹³C NMR study shows that the isotactic poly-propylene obtained has fairly high [mmmm] methyl pentad distributions at high T_p (?25°C with [mmmm] ～ 0.93–0.75) and a perfect stereoregularity at low T_p (?0°C with [mmmm] > 0.99). The catalyst precursors 2 and Et(Ind)₂ZrCl₂ ( 3 ) supported on silica by different approaches produced poly(olefins) of different molecular weights and stereoregularities, and a methylaluminokane and Ph₃CB(C₆F₅)₄ free silica-supported zirconocene system was found to be activated by triisobutylaluminum. © 1995 John Wiley & Sons, Inc.     

High polymerization of methyl methacrylate with organonickel/MMAO systems

A series of nickel complexes, including Ni(acac)₂, (C₅H₅)Ni(η³‐allyl), and [NiMe₄Li₂(THF)₂]₂, that were activated with modified methylaluminoxane (MMAO) exhibited high catalytic activity for the polymerization of methyl methacrylate (MMA) but showed no catalytic activity for the polymerization of ethylene and 1‐olefins. The resulting polymers exhibited rather broad molecular weight distributions and low syndiotacticities. In contrast to these initiators, the metallocene complexes (C₅H₅)₂Ni, (C₅Me₅)₂Ni, (Ind)₂Ni, and (Me₃SiC₅H₄)₂Ni provided narrower molecular weight distributions at 60 °C when these initiator were activated with MMAO. Half‐metallocene complexes such as (C₅H₅)NiCl(PPh₃), (C₅Me₅)NiCl(PPh₃), and (Ind)NiCl(PPh₃) produced poly(methyl methacrylate) (PMMA) with much narrower molecular weight distributions when the polymerization was carried out at 0 °C. Ni[1,3‐(CF₃)₂‐acac]₂ generated PMMA with high syndiotacticity. The NiR(acac)(PPh₃) complexes (R = Me or Et) revealed high selectivity in the polymerization of isoprene that produced 1,2‐/3,4‐polymer at 0 °C exclusively, whereas the polymerization at 60 °C resulted in the formation of cis‐1,4‐rich polymers. The polymerization of ethylene with Ni(1,3‐tBu₂‐acac)₂ and Ni[1,3‐(CF₃)₂‐acac]₂ generated oligo‐ethylene with moderate catalytic activity, whereas the reaction of ethylene with Ni(acac)₂/MMAO produced high molecular weight polyethylene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4764–4775, 2000     

Synthesis,structure and catalytic properties of new half-titanocene complexes bearing substituted cyclopentadienyl and aryloxide ligands

New cyclopentadienyltitanium aryloxide complexes, 1-phenyl-2,3,4,5-Me4CpTi(O-2,6-ⁱPr₂-4-ⁿBu-C₆H₂)Cl₂ (1) and [4,4′-biphenyl-(2,3,4,5-Me₄Cp)₂][Ti(O-2,6-ⁱPr₂-4-ⁿBu-C₆H₂)Cl₂]₂ (2), have been prepared by treatment of cyclopentadienyltitanium trichloride complexes [PhMe₄CpTiCl₃ and 4,4′-biphenyl-(Me₄CpTiCl₃)₂] with 1 or 2 equiv of lithium salt of 2,6-di-isopropyl-4-butylphenol. Complexes 1 and 2 have been characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy. The molecular structure of 1 has been determined by single-crystal X-ray diffraction. Upon activation with ⁱBu₃Al and Ph₃CB(C₆F₅)₄, 1 and 2 both exhibit good catalytic activity for ethylene polymerization, producing polyethylene with moderate molecular weight and melting point.     

Binuclear Orthometalated N,N-Dimethylbenzylamine Complexes of Palladium(II): Synthesis,Structures and Thermal Behavior

Abstract

Organochalcogenolate-bridged cyclometalated palladium(II) complexes of the formulae, [Pd₂(μ-Epy)₂(Me₂NCH₂C₆H₄-C,N)₂] (2) (E = S (2a), Se (2b)), [Pd₂(μ-SAr)(μ-Cl)(Me₂NCH₂C₆H₄-C,N)₂] (3) (Ar = Ph (3a), Mes (Mes = 2,4,6-Me₃C₆H₂) (3b)) and [Pd₂(μ-SeAr)₂(Me₂NCH₂C₆H₄-C,N)₂] (4) (Ar = Ph (4a), Mes (4b)), have been synthesized by the reactions of [Pd₂(μ-Cl)₂(Me₂NCH₂C₆H₄-C,N)₂] with lead or sodium salts of the chalcogenolate ligand. These complexes have been characterized by elemental analysis, mass spectral data, and NMR (¹H and ⁷⁷Se{¹H}) spectroscopy. The molecular structure of 2, determined by single crystal X-ray diffraction analysis, revealed a Epy-bridged head-to-tail arrangement in which the eight-membered “(PdECN)₂” ring adopts a distorted twist boat conformation. The Pd····Pd separation in 2a is within the van-der-Waals interaction but in 2b it is too large to support the presence of any metal–metal interaction. The thermal behavior of these complexes has been studied by thermogravimetric analysis.