液晶聚合物的单层与Langmuir-Blodgett膜

系统研究了手性液晶聚硅氧烷和光致变色液晶聚硅氧烷两个毓的侧链液晶聚合物在空气/水界面的单层行为和Langmuir-Blodgett(LB)膜沉积特性,对LB膜结构与存在的聚集现象进行了系统的表征,并初步探讨了LB膜中液晶聚合物表现的功能性。     

可溶性聚酰亚胺液晶取向膜的制备与性能

液晶取向膜是液晶显示器中的关键材料,为了制得性能优良的液晶取向膜,我们通过铃木偶联反应制备了3种含有不同末端基团的3,5-二氨基联苯,将制得的3种二胺单体分别与环丁烷四甲酸二酐聚合得到3种新型的聚酰亚胺。 利用核磁氢谱对单体和聚合物的结构进行了表征,测试了聚合物的溶解性、热稳定性以及用作液晶取向膜的性能。 结果表明,所得的聚酰亚胺具有良好的溶解性和热稳定性,经过机械摩擦后,末端带有甲氧基的聚酰亚胺能使液晶分子平行于摩擦方向取向,末端带有苯氧羰基和联苯氧羰基的聚酰亚胺能使液晶分子垂直于摩擦方向取向。 此类可溶性的聚酰亚胺液晶取向膜将简化制备工艺并在柔性显示器件中具有较大的应用价值。     

原位红外光谱法研究电纺聚酰胺酸纳米纤维膜热亚胺化过程

以均苯二酐和二苯醚二胺为原料合成聚酰胺酸溶液,通过静电纺丝法制得聚酰胺酸纳米纤维膜.利用原位红外技术研究亚胺化进程,并以优化的条件制得聚酰亚胺纳米纤维膜.研究结果表明,当升温速率为2℃/min时,在350℃可实现100%亚胺化;升温速率过快,纳米纤维膜的亚胺化程度较低;采用快速-慢速相结合的升温方法,则可以有效地提高亚胺化效率.     

聚酰亚胺LB膜热解制备SiC薄膜的XPS研究

用XPS对沉积在硅基片上的聚酰亚胺LB膜以及由它真空热解制备的SiC薄膜进行了研究 ,并对其形成过程进行了跟踪分析 .XPS结果显示聚酰亚胺LB膜结构均匀 ,质量良好 ;真空热解时 ,约在 6 70℃时LB膜中的C与衬底Si反应形成SiC ;Ar离子溅射深度俄歇谱表明所制备的SiC膜中Si和C浓度成梯度分布 ,说明SiC是由Si和C相互扩散反应形成的     

聚酰亚胺LB膜研究：Ⅱ.聚酰胺酸N,N—二甲基十八铵盐LB膜的表征 …

聚酰胺酸Ｎ,Ｎ－二甲基十八铵盐ＬＢ膜具有严格排列的周期结构,其亚胺化可以在比聚酰胺酸更为温和的条件下进行。测定了沉积在单晶硅片上的聚酰亚胺涂膜的热分解性能。于真空和高温下聚酰亚胺ＬＢ膜会热解并与基片硅反应而生成规则结构的ＳｉＣ准单晶膜。     

聚酰亚胺LB膜研究 Ⅱ.聚酰胺酸N,N-二甲基十八铵盐LB膜的表征和热分解性能

聚酰胺酸Ｎ,Ｎ－二甲基十八铵盐ＬＢ膜具有严格排列的周期结构,其亚胺化可以在比聚酰胺酸更为温和的条件下进行。测定了沉积在单晶硅片上的聚酰亚胺涂膜的热分解性能。于真空和高温下聚酰亚胺ＬＢ膜会热解并与基片硅反应而生成规则结构的ＳｉＣ准单晶膜。     

聚酰亚胺/SiO2杂化膜的制备、表征和气体渗透性能

采用溶胶凝胶法,在以TiO2为过渡层的硅藻土-莫来石陶瓷膜管基底上,制备了组分不同的聚酰亚胺/SiO2杂化膜。聚酰亚胺是利用4,4′-六氟亚异丙基邻苯二甲酸酐、2,4,6-三甲基-1,3-苯二胺和3,5-二氨基苯甲酸在溶液中进行亚胺化完成的。采用FT-IR、TG/DTA、DSC、SEM、BET和气体渗透测定对膜进行了表征和测试。结果表明,聚酰亚胺通过支链上的羧酸基和SiO2相键连织构成了具有规则孔道的空间网状结构,并且随着SiO2含量的增加孔径逐渐减小;杂化膜具有较高的热稳定性和有机无机兼容性;相对于聚酰亚胺膜,杂化膜对H2、CO2和H2O与N2相比较具有较高的分离性,SiO2含量为25(wt)%的杂化膜对H2/N2、CO2/N2和H2O/N2的分离因子分别达到55.9、31.1和42.8。     

耐超高温双酮酐型聚酰亚胺的合成及性能

以4,4'-对苯二甲酰二邻苯二甲酸酐(TDPA)为芳二酐单体,对苯二胺(PPD)为芳二胺单体,经低温溶液缩聚制得成膜性能优良的高相对分子质量聚酰胺酸(PAA),再经过热亚胺化制备双酮酐型聚酰亚胺(PI)薄膜。 采用傅里叶变换红外光谱仪(FT-IR)、广角X射线衍射(WAXD)、差示扫描量热仪(DSC)、动态热机械分析仪(DMA)、热重分析仪(TGA)、紫外-可见分光光度计(UV-Vis)及力学性能等技术手段表征了聚酰亚胺膜的结构和性能,考察了不同亚胺化温度对合成的双酮酐型聚酰亚胺膜性能的影响。 结果表明,经程序升温至320 ℃能使PAA热亚胺化基本趋于完成。 PI薄膜为部分有序聚集态结构,玻璃化转变温度(T_g)为298 ℃,具有优异的热性能,热失重温度(T_5%)为523 ℃。 拉伸强度达到130 MPa,弹性模量为5.77 GPa。 PI薄膜紫外光透过截止波长为375 nm,在可见光区具有良好的透光性能及耐溶剂性能。     

聚酰亚胺光控取向膜的研究现状

用线性偏振紫外光照射聚酰亚胺膜可以诱导液晶取向。本文对四种聚酰亚胺光控取向膜进行了详细的概述，并简述了这种光控取向膜的机理及未来应用。     

含液晶基团的冠醚LB膜研究

合成了含有联苯介晶基团的长链冠醚,并首次制成含液晶基团的冠醚LB膜,由LB膜的荧光光谱研究发现,与其单体在CHCl_3稀溶液中的荧光光谱相比,LB膜的荧光光谱向长波方向移动,表明分子均以缔结状态存在,XRD结果表明,LB膜具有良好的有序结构,单分子膜厚2.6nm。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.