Point-form quantum field theory and meson form factors

We comment on canonical quantization of relativistic field theories on a Lorentz-invariant surface of the form x ² = τ². By this choice of the quantization surface all components of the four-momentum operator become interaction dependent, whereas the generators of Lorentz transformations stay free of interactions – a feature characteristic for Dirac’s “point-form” of relativistic dynamics. In the sequel we demonstrate how field theoretical concepts may enter the framework of relativistic quantum mechanics. To this aim we employ a Poincaré-invariant approximation scheme, which allows to reduce a field theoretical many-body problem to a multichannel problem for a Bakamjian-Thomas-type mass operator. As an application of this multichannel formalism we will discuss the scattering of an electron by a (confined) quark-antiquark pair. It will be sketched how an electromagnetic meson form factor can be extracted from the one-photon exchange optical potential.     

Propagation regimes of intense circularly polarized laser beam in magnetoactive plasma

This paper presents an analytical and numerical investigation of an intense circularly polarized wave propagating along the static magnetic field parallel to oscillating magnetic field in magnetoactive plasma. In the relativistic regime such a magnetic field is created by pulse itself. The authors have studied different regimes of propagation with relativistic electron mass effect for magnetized plasma. An appropriate expression for dielectric tensor in relativistic magnetoactive plasma has been evaluated under paraxial theory. Two modes of propagation as extraordinary and ordinary exist; because of the relativistic effect, ultra-strong magnetic fields are generated which significantly influence the propagation of laser beam in plasma. The nature of propagation is characterized through the critical-divider curves in the normalized beam width with power plane For given values of normalized density (ω_p/ω) and magnetic field (ω_c/ω) the regions are namely steady divergence (SD), oscillatory divergence (OD) and self-focusing (SF). Numerical computations are performed for typical parameters of relativistic laser-plasma interaction: magnetic field B = 10-100 MG; intensity I = 10¹⁶ to 10²⁰ W/cm²; laser frequency ω = 1.1 × 10¹⁵ s⁻¹; cyclotron frequency ω_c = 1.7 × 10¹³ s⁻¹; electron density n_e = 2.18 × 10²⁰ cm⁻³. From the calculations, we confirm that a circularly polarized wave can propagate in different regimes for both the modes, and explicitly indicating enhancement in wave propagation, beam focusing/self-guiding and penetration of E-mode in presence of magnetic field.     

Magnetic, electric, and optical functionalities of (PLZT)x(BiFeO3)1−x ferroelectric-ferromagnetic thin films

We have prepared a series of (PLZT)_x(BiFeO₃)_1−x transparent thin films with thickness of 300 nm by a thermal pyrolysis method. Only films with x≦0.10 formed a single phase of perovskite structure. The film where x=0.10 exhibited both ferromagnetic and ferroelectric properties at room temperature with spontaneous magnetization and coercive magnetic fields of 0.0027μ_B and 5500 G, respectively. The remanent electric polarization and coercive electric field for the film where x=0.10 were 3.0 μC/cm² and 24 kV/cm, respectively. Additionally, films with 0.02≦x≦0.10 showed both magneto-optical effects and the second harmonic generation of transmitted light.     

Field electron emission from HfNxOy thin films deposited by direct current sputtering

HfN_xO_y thin films were deposited on Si substrates by direct current sputtering at room temperature. The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD). SEM indicates that the film is composed of nanoparticles. AFM indicates that there are no sharp protrusions on the surface of the film. XRD pattern shows that the films are amorphous. The field electron emission properties of the film were also characterized. The turn-on electric field is about 14 V/μm at the current density of 10 μA/cm², and at the electric field of 24 V/μm, the current density is up to 1 mA/cm². The field electron emission mechanism of the HfN_xO_y thin film is also discussed.     

Canonical quantization of Galilean covariant field theories

The Galilean-invariant field theories are quantized by using the canonical method and the five-dimensional Lorentz-like covariant expressions of non-relativistic field equations. This method is motivated by the fact that the extended Galilei group in 3 + 1 dimensions is a subgroup of the inhomogeneous Lorentz group in 4 + 1 dimensions. First, we consider complex scalar fields, where the Schrödinger field follows from a reduction of the Klein-Gordon equation in the extended space. The underlying discrete symmetries are discussed, and we calculate the scattering cross-sections for the Coulomb interaction and for the self-interacting term λΦ⁴. Then, we turn to the Dirac equation, which, upon dimensional reduction, leads to the Lévy-Leblond equations. Like its relativistic analogue, the model allows for the existence of antiparticles. Scattering amplitudes and cross-sections are calculated for the Coulomb interaction, the electron-electron and the electron-positron scattering. These examples show that the so-called ‘non-relativistic’ approximations, obtained in low-velocity limits, must be treated with great care to be Galilei-invariant. The non-relativistic Proca field is discussed briefly.     

Laser synthesis of nitrides on the surface of refractory metals immersed in liquid nitrogen

In this paper we describe an approach for the formation of composite layers on the surface of refractory metals. We show that laser radiation on refractory metals (Ti, V, Zr, Mo, Hf, Ta, and W) immersed in liquid nitrogen can provide a chemical synthesis of nitride phases on the surface of metals. The metals were subjected to pulsed laser radiation with a wavelength of 1.06 μm. The power density ranged from 10⁴ to 10⁹ W cm⁻². The synthesis of nitrides began with the formation of Me_xN_y (x > y) phases with low contents of nitrogen. When the melting point was reached at the metal surface, the quantity of MeN phases increased sharply. Study of the melting zone showed that it contained a non-uniform distribution of nitride phases. The quantity of nitrides was a maximum on the surface and decreased with the increase of the depth of melting zone. Due to the high-cooling rates, titanium nitride crystallized in the form of columns. Maximum microhardness in the Ti surface layer was up to 20,000 MPa.     

Production of bulk dilute ferromagnetic semiconductor by mechanical milling

We tried to prepare the bulk dilute ferromagnetic semiconductor (DMS) by mechanical milling (MM). Experimental results were as following: (1) The observation of X-ray diffraction and transmitting electron microscopy showed that the particle diameter of host ZnO powder were reduced to about 10 nm by MM. (2) The MM for the mixtures of V₂O₅/ZnO or γ-Fe₂O₃/ZnO realizes the V- or Fe-doped ZnO nano-powders. (3) The values of magnetization under the field of 5 kOe were nearly saturated to 0.8×10⁻³ to 3×10⁻³ μ_B/V-ion for V_xZn_1−xO (x=0.05, 0.1 and 0.2), and 0.2–0.3 μ_B/Fe-ion for Fe_xZn_1−xO (x=0.05 and 0.1) at room temperature. The above results show that the ferromagnetic DMS powder of V_xZn_1−xO and Fe_xZn_1−xO were successfully prepared by MM method.     

Spin-polarized transport in adiabatic quantum point contact with strong Rashba spin-orbit interaction

We first report 0.5(2e²/h) conductance quantization in adiabatic quantum point contacts (QPCs) fabricated at high In-content InGaAs/InAlAs single heterojunctions under no magnetic field. This quantization seems difficult to understand, since the spin one-dimensional (1D) subbands in the QPCs are generally degenerated when B=0. However, this observation is reproducible in various QPC samples with different dimensions but not likely so definite as the conductance quantization in usual QPCs. It is noted that this particular heterojunction 2DEG is found to have high electron mobility of <5×10⁵ cm²/Vs as well as very large Rashba spin-orbit (SO) coupling constant of <35×10⁻¹² eVm. So that, the QPCs realized here can be regarded as a kind of Tomonaga-Luttinger wire with an enhanced Rashba interaction. In such a case, a mode coupling between the Rashba splitting 1D subbands gives rise to a spin-polarized transport in each ±k direction. This theory could be the one plausible candidate to explain the 0.5(2e²/h) conductance quantization observed here in the adiabatic QPC. This finding would be developed to novel spin-filters or spin-directional coupler devices based on nonmagnetic semiconductors.     

Magnetic ordering above room temperature in the sigma-phase of Fe66V34

Magnetic properties of four sigma-phase Fe_100−xV_x samples with 34.4?x?55.1 were investigated by Mössbauer spectroscopy and magnetic measurements in the temperature interval 4.2-300 K. Four magnetic quantities, viz. hyperfine field, Curie temperature, magnetic moment and susceptibility, were determined. The sample containing 34.4 at% V was revealed to exhibit the largest values found up to now for the sigma-phase for average hyperfine field, 〈B〉=12.1 T, average magnetic moment per Fe atom, 〈μ〉=0.89 μ_B, and Curie temperature, T_C=315.3 K. The quantities were shown to be strongly correlated with each other. In particular, T_C is linearly correlated with 〈μ〉 with a slope of 406.5 K/μ_B, as well as 〈B〉 is so correlated with 〈μ〉, yielding 14.3 T/μ_B for the hyperfine coupling constant.     

Preparation and multi-properties of insulated single-phase BiFeO3 ceramics

Six types of BiFeO₃ ceramic samples, with subtle differences in synthesis conditions, were prepared. The comparison of their phases, electrical resistivity, and porosity revealed that the use of Bi₂O₃ and Fe₂O₃ powders of <1 μm size and a rapid liquid-phase sintering process of 855 °C for 5 min at 100 °C/s is beneficial to synthesize poreless single-phase BiFeO₃ samples with high electrical resistivity of ∼5×10¹² Ω cm. Deoxygenated Bi_xFe_yO_{1.5x+1.5y−δ} (x≠y, δ≥0) impurities were identified and found to be the main cause of low electrical resistivity and high porosity in the multi-phase samples. Large saturation polarization of 16.6 μC/cm² and low leakage current density of 30 mA/m², both at a high electric field of 145 kV/cm, were measured in the optimized single-phase samples at room temperature besides a large piezoelectric d₃₃ coefficient of 27 pC/N and an obvious canted antiferromagnetic behavior.     

Structure, magnetic and optical properties of polycrystalline Co-doped TiO2 films

Co-doped TiO₂ films were fabricated under different conditions using reactive facing-target magnetron sputtering. Co doping improves the transformation of TiO₂ from anatase phase to rutile phase. The chemical valence of doped Co in the films is +2. All the films are ferromagnetic with a Curie temperature above 340 K. The average room-temperature moment per Co of the Co-doped TiO₂ films fabricated at 1.86 Pa decreases from 0.74 μ_B at x=0.03 to 0.02 μ_B at x=0.312, and decreases from 0.54 to 0.04 μ_B as x increases from 0.026 to 0.169 for the Co-doped TiO₂ films fabricated at 0.27 Pa. The ferromagnetism originates from the oxygen vacancies created by Co²⁺ dopants at Ti⁴⁺ cations. The optical band gaps value (E_g) of the Co-doped TiO₂ films fabricated at 1.86 Pa decreases linearly from 3.35 to 2.62 eV with the increasing x from 0 to 0.312. For the Co-doped TiO₂ films fabricated at 1.86 Pa, the E_g decreases linearly from 3.26 to 2.53 eV with increasing x from 0 to 0.350.     

Parallel syntheses and thermoelectric properties of Ce-doped SrTiO3 thin films

Thermoelectric properties of single crystalline Ce_xSr_1−xTiO₃ films (0 ≤ x ≤ 0.5) have been studied by using combinatorial pulsed-laser deposition. Temperature gradient method was used for identifying an optimum growth temperature for SrTiO₃ homoepitaxial growth, at which both oxygen stoichiometry and persisting layer-by-layer growth mode could be accomplished. Electrical conductivity (σ) and Seebeck coefficient (S) were measured at room temperature for the composition-spread films grown at the optimized temperature and found to be considerably higher than those reported for bulk poly-crystalline compounds. Hall measurement revealed that carrier density linearly increased with increasing x, suggesting that a trivalent Ce ions substituted divalent Sr ions to supply electrons. A maximum power factor (S²σ) was obtained for the x = 0.2 film, being 7 and 14 μW/K² cm at 300 and 900 K, respectively.     

The ideal relativistic rotating gas as a perfect fluid with spin

We show that the ideal relativistic spinning gas at complete thermodynamical equilibrium is a fluid with a non-vanishing spin density tensor σ_μν. After having obtained the expression of the local spin-dependent phase-space density f(x, p)_στ in the Boltzmann approximation, we derive the spin density tensor and show that it is proportional to the acceleration tensor Ω_μν constructed with the Frenet-Serret tetrad. We recover the proper generalization of the fundamental thermodynamical relation, involving an additional term −(1/2)Ω_μνσ^μν. We also show that the spin density tensor has a non-vanishing projection onto the four-velocity field, i.e. t^μ = σ_μνu^ν ≠ 0, in contrast to the common assumption t^μ = 0, known as Frenkel condition, in the thus-far proposed theories of relativistic fluids with spin. We briefly address the viewpoint of the accelerated observer and inertial spin effects.     

Residual surface stress measurements in YBa2Cu3Ox superconductors

XRD and residual surface stress (sin² ψ) measurements were carried out on YBa₂Cu₃O_x superconductors with varying oxygen stoichiometry (6.3 < x < 7.0). Slopes of the surface strain versus sin² ψ were plotted against oxygen content for certain reflections. Compressional surface stress has been found along the c-axis, while a tensile surface stress has been observed along the ab-plane. Both surface stresses were found to vary slightly with oxygen content. These findings qualitatively agree with a very small hydrostatic pressure effect on T_c for fully oxygenated YBa₂Cu₃O_x (x = 7) compared to oxygen deficient material at the surface.     

Structural and surface properties of Si1−xGex thin films obtained by reduced pressure CVD

This paper investigates the structure and surface characteristics, and electrical properties of the polycrystalline silicon-germanium (poly-Si_1−xGe_x) alloy thin films, deposited by vertical reduced pressure CVD (RPCVD) in the temperature range between 500 and 750 °C and a total pressure of 5 or 10 Torr. The samples exhibited a very uniform good quality films formation, with smooth surface with rms roughness as low as 7 nm for all temperature range, Ge mole fraction up to 32% (at 600 °C), textures of 〈2 2 0〉 preferred orientation at lower temperatures and strong 〈1 1 1〉 at 750 °C, for both 5 and 10 Torr deposition pressures. The ³¹P⁺ and ¹¹B⁺ doped poly-Si_1−xGe_x films exhibited always lower electrical resistivity values in comparison to similar poly-Si films, regardless of the employed anneal temperature or implantat dose. The results indicated also that poly-Si_1−xGe_x films require much lower temperature and ion implant dose than poly-Si to achieve the same film resistivity. These characteristics indicate a high quality of obtained poly-Si_1−xGe_x films, suitable as a gate electrode material for submicron CMOS devices.     

Relativistic interactions for the meson-two-nucleon system in the clothed-particle unitary representation

The method of unitary clothing transformations put forward in relativistic quantum field theory (QFT) by Greenberg and Schweber and developed by Shirokov is applied to construct a new family of interactions in the meson-two-nucleon system. Along with a brief exposition of its basic elements we show a specific transition from the initial “bare” one-meson and one-nucleon operators and states to their physical “clothed” counterparts. We emphasize that the clothing transformations in question do not alter the original total Hamiltonian, but provides a conceptually more transparent representation of the same Hamiltonian in terms of a new set of operators for particles with physical properties and their relativistic interactions. The Hermitian and energy-independent interaction operators for the processes πN → πN, NN → NN and NN ↔ πNN are derived starting from the Yukawa-type couplings between fermions (nucleons and antinucleons) and bosons (π−, η−, ρ−, ω− mesons, etc.). These types of interaction have a distinctive off-energy-shell structure which is naturally generated by the unitary transformation that removes from the Hamiltonian the (three-leg) πNN vertex coupling.     

Magnetic and electrical properties of amorphous Ge1−xCrx thin films grown by low temperature vapor deposition

Amorphous Ge_1−xCr_x thin films are deposited on (1 0 0)Si by using a thermal evaporator. Amorphous phase is obtained when Cr concentration is lower than 30.7 at%. The electrical resistivities are 1.89×10⁻³–0.96×10² Ω cm at 300 K, and decrease with Cr concentration. The Ge_1−xCr_x thin films are p-type. The hole concentrations are 5×10¹⁶–7×10²¹ cm⁻³ at 300 K, and increase with Cr concentration. Magnetizations are 7.60–1.57 emu/cm³ at 5 K in the applied field of 2 T. The magnetizations decrease with Cr concentration and temperature. Magnetization characteristics show that the Ge_1−xCr_x thin films are paramagnetic.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

Nanostructures on SiC surface created by laser microablation

Silicon carbide (SiC), as it is well-known, is inaccessible to usual methods of technological processing. Consequently, it is important to search for alternative technologies of processing SiC, including laser processing, and to study the accompanying physical processes. The work deals with the investigation of pulsed laser radiation influence on the surface of 6H-SiC crystal. The calculated temperature profile of SiC under laser irradiation is shown. Structural changes in surface and near-surface layers of SiC were studied by atomic force microscopy images, photoluminescence, Raman spectra and field emission current-voltage characteristics of initial and irradiated surfaces. It is shown that the cone-shaped nanostructures with typical dimension of 100-200 nm height and 5-10 nm width at the edge are formed on SiC surface under nitrogen laser exposure (λ = 0.337 μm, t_p = 7 ns, E_p = 1.5 mJ). The average values of threshold energy density 〈W_thn〉 at which formation of nanostructures starts on the 0 0 0 1 and surfaces of n-type 6H-SiC(N), nitrogen concentration n_N ≅ 2 × 10¹⁸ cm⁻³, are determined to be 3.5 J/cm² and 3.0 J/cm², respectively. The field emission appeared only after laser irradiation of the surface at threshold voltage of 1000 V at currents from 0.7 μA to 0.7 mA. The main role of the thermogradient effect in the processes of mass transfer in prior to ablation stages of nanostructure formation under UV laser irradiation (LI) was determined. We ascertained that the residual tensile stresses appear on SiC surface as a result of laser microablation. The nanostructures obtained could be applied in the field of sensor and emitting extreme electronic devices.     

Low temperature specific heat of bi-layered manganites La2−2xSr1+2xMn2O7 (x=0.3 and 0.5)

The specific heat (C) of bi-layered manganites La_2−2xSr_1+2xMn₂O₇ (x=0.3 and 0.5) is investigated for the ground state of low temperature excitations. A T^3/2 dependent term in the low temperature specific heat (LTSH) is identified at zero magnetic field and suppressed by magnetic fields for x=0.3 sample, which is consistent with a ferromagnetic metallic ground state. For x=0.5 sample, a T² term is observed and is consistent with a two-dimensional (2D) antiferromagnetic insulator. However, it is almost independent of magnetic field within the range of measured temperature (0.6-10 K) and magnetic field (6 T).