Evolution of the 251 cm-1 infrared phonon mode with temperature in Ba0.6K0.4Fe2As2

The far-infrared optical reflectivity of an optimally doped Ba1-xKxFe2As2(x =0.4) single crystal is measured from room temperature down to 4 K. We study the temperature dependence of the in-plane infrared-active phonon at 251 cm-1 . This phonon exhibits a symmetric line shape in the optical conductivity, suggesting that the coupling between the phonon and the electronic background is weak. Upon cooling down, the frequency of this phonon continuously increases, following the conventional temperature dependence expected in the absence of a structural or magnetic transition. The intensity of this phonon is temperature independent within the measurement accuracy. These observations indicate that the structural and magnetic phase transition might be completely suppressed by chemical doping in the optimally doped Ba0.6K0.4Fe2As2 compound.     

Thermal properties of high-k Hf_1-xSi_xO₂

Classical atomistic simulations based on the lattice dynamics theory and the Born core-shell model are performed to systematically study the crystal structure and thermal properties of high-k Hf1-xSixO2 . The coefficients of thermal expansion, specific heat, Grneisen parameters, phonon densities of states and Debye temperatures are calculated at different temperatures and for different Si-doping concentrations. With the increase of the Si-doping concentration, the lattice constant decreases. At the same time, both the coefficient of thermal expansion and the specific heat at a constant volume of Hf1-xSixO2 also decreases. The Grneisen parameter is about 0.95 at temperatures less than 100 K. Compared with Si-doped HfO2 , pure HfO2 has a higher Debye temperature when the temperature is less than 25 K, while it has lower Debye temperature when the temperature is higher than 50 K. Some simulation results fit well with the experimental data. We expect that our results will be helpful for understanding the local lattice structure and thermal properties of Hf1-xSixO2 .     

Magnetic and dielectric response of cobalt-chromium spinel CoCr<Subscript>2</Subscript>O<Subscript>4</Subscript> in the terahertz frequency range

The nature of the phonon and magnon modes in the CoCr₂O₄ multiferroic with a cubic spinel structure has been studied using submillimeter spectroscopy and infrared Fourier spectroscopy. This paper reports on the first measurement of the evolution with temperature of the exchange optical magnon in the ferrimagnetic (T _C = 94 K) and two low-symmetry (T _S ≈ 26 K, T _lock-in = 14.5 K) phases of CoCr₂O₄ down to T = 5 K in zero magnetic field. It has been shown that the detected magnon is not a ferrimagnetic order parameter and originates, most probably, from spin precession in the cobalt sublattices. At the points of the magnetic phase transitions, the oscillator parameters of the two lowest-frequency phonon modes reveal an anomalous temperature behavior, thus evidencing the presence of significant interaction between the magnetic and phonon subsystems. The increase by 25% of the damping parameter of the phonon mode originating from vibrations of the CoO₄ tetrahedra during the transition of CoCr₂O₄ to the multiferroic state (T < T _S ) suggests structural changes in the lattice involving loss of spatial central symmetry of the medium.     

The phase transition,hygroscopicity, and thermal expansion properties of Yb_2-xAl_xMo₃O₁₂

Materials with the formula Yb 2-xAlxMo3O12(x =0.1, 0.2, 0.3, 0.4, 0.5, 0.7, 0.9, 1.0, 1.1, 1.3, 1.5, and 1.8) were synthesized and their structures, phase transitions, and hygroscopicity investigated using X-ray powder diffrac- tion, Raman spectroscopy, and thermal analysis. It is shown that Yb2-xAlxMo3O12 solid solutions crystallize in a single monoclinic phase for 1.7 ≤ x ≤ 2.0 and in a single orthorhombic phase for 0.0 ≤ x ≤ 0.4, and exhibit the characteristics of both monoclinic and orthorhombic structures outside these compositional ranges. The monoclinic to orthorhombic phase transition temperature of Al2Mo3O12 can be reduced by partial substitution of Al 3+ by Yb3+, and the Yb2-x AlxMo3O12 (0.0 < x ≤ 2.0) materials are hydrated at room temperature and contain two kinds of water species. One of these interacts strongly with and hinders the motions of the polyhedra, while the other does not. The partial substitution of Al3+ for Yb3+ in Yb2Mo3O12 decreases its hygroscopicity, and the linear thermal expansion co- efficients after complete removal of water species are measured to be 9.1×10 6 /K, 5.5×10 6 /K, 5.74×10 6 /K, and 9.5 × 10 6 /K for Yb1.8 Al0.2 (MoO4)3 , Yb1.6Al0.4 (MoO4 )3, Yb0.4 Al1.6 (MoO4)3 , and Yb 0.2Al1.8 (MoO4)3 , respectively.     

Charge ordering modulations in a Bi_0.4Ca_0.6MnO₃ film with a thickness of 110 nm

The low temperature sample stage in a transmission electron microscope is used to investigate the charge ordering behaviours in a Bi 0.4 Ca 0.6 MnO 3 film with a thickness of 110 nm at 103 K.Six different types of superlattice structures are observed using the selected-area electron diffraction(SAED) technique,while three of them match well with the modulation stripes in high-resolution transmission electron microscopy(HRTEM) images.It is found that the modulation periodicity and direction are completely different in the region close to the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface from those in the region a little further from the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface,and the possible reasons for this are discussed.Based on the experimental results,structural models are proposed for these localized modulated structures.     

Stereodynamics of the reactions Ne+H₂⁺/Ne+D₂⁺/Ne+T₂

The vector correlations between products and reagents for the reactions Ne+H + 2 , Ne+D + 2 , and Ne+T + 2 are calculated by means of the quasi-classical trajectory method on a new potential energy surface constructed by Lü et al. [J. Chem. Phys. 2010 132, 014303]. The polarization-dependent differential cross-sections (2π/σ)(dσ 00 /dω t ), (2π/σ)(dσ 20 /dω t ), (2π/σ)(dσ 22+ /dω t ), and (2π/σ)(dσ 21 /dω t ), and the distributions of P (θ r ), P (φ r ), and P (θ r ,φ r ) are calculated. The isotopic effect, which is associated with the difference in mass factor among the three reactions, is revealed.     

The concentration quenching and crystallographic sites of Eu²⁺ in Ca₂BO₃Cl

A yellow phosphor, Ca2BO3 Cl:Eu2+ , is prepared by the high-temperature solid-state method. Under the condition of excitation sources ranging from ultraviolet to visible light, efficient yellow emission can be observed. The emission spectrum shows an asymmetrical single intensive band centred at 573 nm, which corresponds to the 4f 6 5d 1 →4f 7 transition of Eu2+ . Eu2+ ions occupy two types of Ca2+ sites in the Ca2BO3 Cl lattice and form two corresponding emission centres, respectively, which lead to the asymmetrical emission of Eu2+ in Ca2 BO 3 Cl. The emission intensity of Eu2+ in Ca2BO3 Cl is influenced by the Eu2+ doping concentration. Concentration quenching is discovered, and its mechanism is verified to be a dipole–dipole interaction. The value of the critical transfer distance is calculated to be 2.166 nm, which is in good agreement with the 2.120 nm value derived from the experimental data.     

Optical properties of ZnCr<Subscript>2</Subscript>Se<Subscript>4</Subscript>

We studied the optical properties of antiferromagnetic ZnCr₂Se₄ by infrared spectroscopy up to 28,000 cm^-1 and for temperatures from 5 to 295 K. At the magnetic phase transition at 21 K, one of the four phonon modes reveals a clear splitting of 3 cm^-1 as a result of spin-phonon coupling, the other three optical eigenmodes only show shifts of the eigenfrequencies. The antiferromagnetic ordering and the concomitant splitting of the phonon mode can be suppressed in a magnetic field of 7 T. At higher energies we observed a broad excitation band which is dominated by a two-peak-structure at about 18,000 cm^-1 and 22,000 cm^-1, respectively. These energies are in good agreement with the expected spin-allowed crystal-field transitions of the Cr³⁺ ions. The unexpected strength of these transitions with d-d character is attributed to a considerable hybridization of the selenium p with the chromium d orbitals.     

Substrate-induced stress in silicon nanocrystal/SiO₂ multilayer structures

A Raman frequency upshift in the nc-Si phonon mode is observed at room temperature, which is attributed to a strong compressive stress in the Si nanocrystals. The 10-period amorphous-Si(3 nm)/amorphous-SiO2 (3 nm) layers are deposited by high-vacuum radio-frequency magnetron sputtering on quartz and sapphire substrates at different temperatures. The samples are then annealed in N2 atmosphere at 1100°C for 1 h for Si crystallization. It is demonstrated that the presence of a supporting substrate at the high growth temperature can induce different types of stresses in the Si nanocrystal layers. The strain is attributed to the difference in the thermal expansion coefficient between the substrate and the Si/SiO2 SL film. Such a substrate-induced stress indicates a new method for tuning the optical and electronic properties of Si nanocrystals for strained engineering.     

Tunable Ba_0.5 Sr_0.5 TiO₃ film bulk acoustic resonators using SiO₂ /Mo Bragg reflectors

Tunable and switchable Ba 0.5 Sr 0.5 TiO 3 film bulk acoustic resonators(FBARs) based on SiO 2 /Mo Bragg reflectors are explored,which can withstand high temperature for the deposition of Ba x Sr 1 x TiO 3(BST) films at 800 C.The dc bias-dependent resonance may be attributed to the piezoelectricity of the BST film induced by an electrostrictive effect.The series resonant frequency is strongly dc bias-dependent and shifts downwards with dc bias increasing,while the parallel resonant frequency is only weakly dc bias-dependent and slightly shifts upwards at low dc bias(< 45 V) while downwards at higher dc bias.The calculated relative tunability of shifts at series resonance frequency is around 2.3% and the electromechanical coupling coefficient is up to approximately 8.09% at 60-V dc bias,which can be comparable to AlN FBARs.This suggests that a high-quality tunable BST FBAR device can be achieved through the use of molybdenum(Mo) as the high acoustic impedance layer in a Bragg reflector,which not only provides excellent acoustic isolation from the substrate,but also improves the crystallinity of BST films withstanding higher deposition temperature.     

High-resolution spectroscopy of HoFe<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> crystal: a study of phase transitions

The transmission spectra of HoFe₃(BO₃) multiferroic single crystals are studied by optical Fourier-transform spectroscopy at temperatures of 1.7–423 K in polarized light in the spectral range 500–10 000 cm^–1 with a resolution up to 0.1 cm^–1. A new first-order structural phase transition close to the second-order transition is recorded at T_c = 360 K by the appearance of a new phonon mode at 976 cm^–1. The reasons for considerable differences in T_c for different samples of holmium ferroborate are discussed. By temperature variations in the spectra of the f–f transitions in the Ho³⁺ ion, we studied two magnetic phase transitions, namely, magnetic ordering into an easy-plane structure as a second-order phase transition at T_N = 39 K and spin reorientation from the ab plane to the c axis as a first-order phase transition at T_SR = 4.7 ± 0.2 K. It is shown that erbium impurity in a concentration of 1 at % decreases the spin-reorientation transition temperature to T_SR = 4.0 K.     

Chiral structures and tunable magnetic moments in 3d transition metal doped Pt₆ clusters

The structural, electronic, and magnetic properties of transition metal doped platinum clusters MPt 6 (M=Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) are systematically studied by using the relativistic all-electron density functional theory with the generalized gradient approximation. Most of the doped clusters show larger binding energies than the pure Pt 7 cluster, which indicates that the doping of the transition metal atom can stabilize the pure platinum cluster. The results of the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps suggest that the doped clusters can have higher chemical activities than the pure Pt 7 cluster. The magnetism calculations demonstrate that the variation range of the magnetic moments of the MPt 6 clusters is from 0 μ B to 7 μ B , revealing that the MPt 6 clusters have potential utility in designing new spintronic nanomaterials with tunable magnetic properties.     

The interplay between the lattice and magnetism in La(Fe_11.4Al_1.6)C_0.02 studied by powder neutron diffraction

The crystallographic structure and magnetic properties of La(Fe 11.4 Al 1.6 )C 0.02 are studied by magnetic measure- ment and powder neutron diffraction with temperature and applied magnetic field. Rietveld refinement shows that La(Fe 11.4 Al 1.6 )C 0.02 crystallizes into the cubic NaZn 13 -type with two different Fe sites: Fe I (8b) and Fe II (96i), and that Al atoms preferentially occupy the Fe II site. A ferromagnetic state can be induced at a medial temperature of 39 K–139 K by an external magnetic field of 0.7 T, and a large lattice is correspondingly found at 100 K and 0.7 T. In all other conditions, La(Fe 11.4 Al 1.6 )C 0.02 has no net magnetization in the paramagnetic (T > T N = 182 K) or antifer- romagnetic states, and thus keeps its small lattice. Analysis of the Fe–Fe bond length indicates that the ferromagnetic state prefers longer Fe–Fe distances.     

Phonon linewidths in YNi<Subscript>2</Subscript>B<Subscript>2</Subscript>C

Phonons in a metal interact with conduction electrons which give rise to a finite linewidth. In the normal state, this leads to a Lorentzian shape of the phonon line. Density functional theory is able to predict the phonon linewidths as a function of wave vector for each branch of the phonon dispersion. An experimental verification of such predictions is feasible only for compounds with very strong electron-phonon coupling. YN₂B₂C was chosen as a test example because it is a conventional superconductor with a fairly high T _c (15.2 K). Inelastic neutron scattering experiments did largely confirm the theoretical predictions. Moreover, they revealed a strong temperature dependence of the linewidths of some phonons with particularly strong electron-phonon coupling which can as yet only qualitatively be accounted for by theory. For such phonons, marked changes of the phonon frequencies and linewidths were observed from room temperature down to 15 K. Further changes were observed on entering into the superconducting state. These changes can, however, not be described simply by a change of the phonon linewidth.      

Pressure-induced superconductivity and structural transitions in Ba(Fe<Subscript>0.9</Subscript>Ru<Subscript>0.1</Subscript>)<Subscript>2</Subscript>As<Subscript>2</Subscript>

Electrical transport and structural characterizations of isoelectronically substituted Ba(Fe_0.9Ru_0.1)₂As₂ have been performed as a function of pressure up to ～ 30 GPa and temperature down to ～ 10 K using designer diamond anvil cell. Similar to undoped members of the AFe₂As₂ (A = Ca, Sr, Ba) family, Ba(Fe_0.9Ru_0.1)₂As₂ shows anomalous a-lattice parameter expansion with increasing pressure and a concurrent ThCr₂Si₂ type isostructural (I4/mmm) phase transition from tetragonal (T) phase to a collapsed tetragonal (cT) phase occurring between 12 and 17 GPa where the a is maximum. Above 17 GPa, the material remains in the cT phase up to 30 GPa at 200 K. The resistance measurements show evidence of pressure-induced zero resistance that may be indicative of high-temperature superconductivity for pressures above 3.9 GPa. The onset of the resistive transition temperature decreases gradually with increasing pressure before completely disappearing for pressures above ～ 10.6 GPa near the T-cT transition. We have determined the crystal structure of the high-T _c phase of Ru-doped BaFe₂As₂ to remain as tetragonal (I4/mmm) by analyzing the X-ray diffraction pattern obtained at 10 K and 9.7 ± 0.7 GPa, as opposed to inferring the structural transition from electrical resistance measurement, as in a previous report [S.K. Kim, M.S. Torikachvili, E. Colombier, A. Thaler, S.L. Bud’ko, P.C. Canfield, Phys. Rev. B 84, 134525 (2011)].     

Neutron diffraction investigation of a metamagnetic transition in the Tb<Subscript>0.1</Subscript> Tm<Subscript>0.9</Subscript>Co<Subscript>2</Subscript> compound

The Tb_0.1Tm_0.9Co₂ compound is investigated using neutron diffraction. It is shown that this compound undergoes an irreversible band metamagnetic transition induced by an external magnetic field. The magnetization of the Co sublattice increases from 0.2 to 0.6 μ_B. The critical field strength is approximately equal to 1 T at temperatures of 1.8 and 4.0 K. As the temperature increases, the effect of the magnetic field on the magnetic state of the sample weakens and, at 25 K, no noticeable changes are observed in an external field of 0.75 T. The metamagnetic transition at 1.8 K is accompanied by the disappearance of rhombohedral distortions and brings about a lattice expansion by approximately 1%.     

Improved multiferroic properties of La-doped 0.6BiFeO₃-0.4SrTiO₃ solid solution ceramics

The 0.6(Bi1-xLax)FeO 3-0.4SrTiO 3(x = 0,0.1) multiferroic ceramics are prepared by a modified Pechini method to study the effect of substitution of SrTiO3 and La in BiFeO3.The X-ray diffraction patterns confirm the single phase characteristics of all the compositions each with a rhombohedral structure.The magnetic properties of the ceramics are significantly improved by a solid solution with SrTiO3 and substitution of La.The values of the dielectric constant ε r and loss tangent tan δ of all the samples decrease with increasing frequency and become constant at room temperature.The La-doped 0.6BiFeO3-0.4SrTiO3 ceramics exhibit improved dielectric and ferroelectric properties,with higher dielectric constant enhanced remnant polarization(Pr) and lower leakage current at room temperature.Compared with a anti-ferromagnetic BiFeO3 compound,the 0.6(Bi0.9La0.1)FeO3-0.4SrTiO3 sample shows the optimal ferromagnetism with remnant magnetization M r ～ 0.135 emμ/g and ferroelectricity with Pr ～ 5.94 μC/cm 2 at room temperature.     

High temperature thermoelectric properties of highly c-axis oriented Bi₂Sr₂Co₂O_y thin films fabricated by pulsed laser deposition

High-temperature thermoelectric transport property measurements have been performed on the highly c-axis oriented Bi2Sr2Co2Oy thin films prepared by pulsed laser deposition on LaAlO3(001).Both the electric resistivity ρ and the seebeck coefficient S of the film exhibit an increasing trend with the temperature from 300 K-1000 K and reach up to 4.8 m·Ω· cm and 202 μV/K at 980 K,resulting in a power factor of 0.85 mW/mK which are comparable to those of the single crystalline samples.A small polaron hopping conduction can be responsible for the conduction mechanism of the film at high temperature.The results demonstrate that the Bi2Sr2Co2Oy thin film has potential application in high temperature thin film thermoelectric devices.     

溶胶-凝胶法制备BaGd1-xEuxB9O16红色磷光粉的发光

采用溶胶-凝胶法制备出BaGd_1-xEu_xB₉O₁₆红色磷光粉,对过程的物料配比、前驱体处理和晶化温度等制备条件进行了讨论。结果表明,样品在850 ℃下开始晶化,900 ℃时就能够获得较好的晶化产物,结合不同晶化温度下的发光强度比较确定,晶化温度为950 ℃时,BaGd_1-xEu_xB₉O₁₆磷光粉具有较高的结晶状态和发光强度。当Eu浓度x=0.9时具有最大的发光强度;初始原料配比硼酸须按计量过量15%。所得荧光粉的激发光谱峰值为264,394,465,534 nm等,分别归属于Eu-O电荷迁移带及Eu³⁺的⁷F₀-⁵L₆、⁷F₀-⁵D₂和⁷F₀-⁵D₁跃迁,发射光谱呈Eu³⁺的特征红光,最强的发射峰位于614 nm,归属于⁵D₀-⁷F₂跃迁。进一步研究表明该磷光粉中存在着Gd³⁺对Eu³⁺的能量传递。     

Ca₂BO₃Cl:Ce³⁺,Tb³⁺:A novel tunable emitting phosphor for white light-emitting diode

<正>Ca₂BO₃Cl:Ce³⁺,Ca₂BO₃Cl:Tb³⁺,and Ca₂BO₃Cl:Ce³⁺,Tb³⁺ phosphors are synthesized by a high temperature solid-state reaction.The emission intensity of Ce³⁺ or Tb³⁺ in Ca₂BO₃Cl is influenced by the Ce³⁺ or Tb³⁺ doping content,and the optimum concentrations of Ce³⁺ and Tb³⁺ are 0.03 mol and 0.05 mol,respectively.The concentration quenching effect of Ce³⁺ or Tb³⁺ in Ca₂BO₃Cl occurs,and the concentration quenching mechanism is d-d interaction for either Ce³⁺ or Tb³⁺.The Ca₂BO₃Cl:Ce³⁺,Tb³⁺ can produce colour emission from blue to green by properly tuning the relative ratio between Ce³⁺ and Tb³⁺,and the emission intensity of Tb³⁺ in Ca₂BO₃Cl can be enhanced by the energy transfer from Ce³⁺ to Tb³⁺.The results indicate that Ca₂BO₃Cl:Ce³⁺,Tb³⁺ may be a promising double emission phosphor for UV-based white light emitting diodes.