New magnetic nanomaterials based on ferrocene-containing polymers synthesized under ultrasonic irradiation

Russian Chemical Bulletin - A new magnetic nanomaterial was obtained based on soluble ferrocene-containing poly-phenylene synthesized under ultrasonic irradiation at room temperature. The maximum...     

Characterization of reactive oxygen species generated by protoporphyrin IX under X-ray irradiation

As a possible radiosensitizer candidate having biological compatibility, oncotropic property, and X-ray activation capability, contribution of protoporphyrin IX (PpIX) to enhanced generation of reactive oxygen species (ROS) under X-ray and UV irradiations were examined. To identify the kinds of ROS, 2-[6-(4-amino)phenoxy-3H-xanthen-3-on-9-yl] benzoic acid (APF) and dihydroethidium (DHE) were used together with ethanol as a hydroxyl radical (OH) quencher. All of the three species of our interest (OH, superoxide radical (O₂⁻), and singlet oxygen (¹O₂)) were enhanced by PpIX under X-ray and UV irradiations in addition to those by radiolysis and photolysis. Its enhancement factors exceeded 1.7 depending on the concentrations of PpIX from 1.5 to 15.0 μg/ml.     

Unusual enhancement of H2 evolution by Ru on TaON photocatalyst under visible light irradiation

H2 evolution on TaON photocatalyst under visible light irradiation (420 nm < or = lambda < or = 500 nm) in an aqueous methanol solution is found to be remarkably enhanced by adding Ru as a noble-metal co-catalyst.     

Photo-stimulated luminescence of KCl:Eu under X-ray and ion irradiation

We compared the photo-stimulated luminescence (PSL) process of storage phosphor KCl:Eu under the irradiation of X-ray, 2.0 MeV H⁺ ions and 2.0 MeV He⁺ ions. The purpose of the irradiation of H⁺ and He⁺ ions was to mimic the irradiation effects of neutrons. In each case, it was revealed that F-centers were involved in the PSL process. We observed an entirely different fluence-dependent PSL behavior between the X-ray and the ion irradiation, whereas the behavior of the F-center absorption was quite similar. This difference was due to the different yields of the trapping sites for the electrons liberated from the F-centers, and the difference in the yield was ascribed to the difference in the excitation density. This result clearly indicated a marked difference in the PSL process under X-ray and neutron irradiations and indicated that the analysis of the PSL process under ion irradiation is highly important for the application of PSL phosphors to neutron radiography.     

Biodegradability enhancement of textile wastewater by electron beam irradiation

Textile wastewater generally contains various pollutants, which can cause problems during biological treatment. Electron beam radiation technology was applied to enhance the biodegradability of textile wastewater for an activated sludge process. The biodegradability (BOD₅/COD) increased at a 1.0 kGy dose. The biorefractory organic compounds were converted into more easily biodegradable compounds such as organic acids having lower molecular weights. In spite of the short hydraulic retention time (HRT) of the activated sludge process, not only high organic removal efficiencies, but also high microbial activities were achieved. In conclusion, textile wastewater was effectively treated by the combined process of electron beam radiation and an activated sludge process.     

Charging of ionic liquid surfaces under X-ray irradiation: the measurement of absolute binding energies by XPS

Ionic liquid surfaces can become electrically charged during X-ray photoelectron spectroscopy experiments, due to the flux of photoelectrons leaving the surface. This causes a shift in the measured binding energies of X-ray photoelectron peaks that depends on the magnitude of the surface charging. Consequently, a charge correction method is required for ionic liquids. Here we demonstrate the nature and extent of surface charging in ionic liquids and model it using chronopotentiometry. We report the X-ray photoelectron spectra for a range of imidazolium based ionic liquids and investigate the use of long alkyl chains (C(n)H(2n+1), n ≥ 8) and the imidazolium nitrogen, both of which are part of the ionic liquid chemical structure, as internal references for charge correction. Accurate and reproducible binding energies are obtained which allow comparisons to be made across ionic liquid-based systems.     

Fabrication of single crystal CuGaS2 nanorods by X-ray irradiation

CuGaS(2) nanorods were synthesized by irradiating the precursor solution with intense X-rays. The products are single crystal nanorods with preferential [220] growth and a uniform size distribution. We also report on the photoresponse of drop-cast films of these nanorods.     

The enhancement effect in non-dispersive X-ray analysis

A theoretical model of the enhancement effect in non-dispersive X-ray analysis is proposed. The considerations relate to a point source and detector localized in the same place (which is an approximation of the conditions of compact geometry). The results obtained in this work are different from those of other authors. Possibilities are suggested for the elimination of the influence of the enhancement effect on the results in non-dispersive X-ray fluorescence analyses.     

Chemical state analysis of Al by high resolution X-ray spectroscopy

A quantitative method for chemical state analysis of aluminum was proposed by the combination of high resolution X-ray spectroscopy and the nonlinear least square fitting method. Determination of coordination and population analysis were performed with AlV₂O₄ and clay minerals.     

X-ray versus gamma irradiation effects on polymers

Today, the most common methods used for medical device sterilisation are by gaseous ethylene oxide and by electron beam or gamma irradiation. With X-ray sterilisation about to enter the market, its material compatibility needs to be assessed at doses typically encountered during a sterilisation process. This paper reports on a study that compares the effects of exposing different types of plastics that are commonly used in medical devices to ⁶⁰Co or to 5 MeV X-rays. The dose rate for both irradiation modalities was of the same order of magnitude. Under these conditions, both types of radiation are found to have similar effects on polymer properties.     

Quantitative measurements of oxidative stress in mouse skin induced by X-ray irradiation

To find efficient methods to evaluate oxidative stress in mouse skin caused by X-ray irradiation, several markers and methodologies were examined. Hairless mice were irradiated with 50 Gy X-rays and skin homogenates or skin strips were prepared. Lipid peroxidation was measured using the skin homogenate as the level of thiobarbituric acid reactive substances. The level of lipid peroxidation increased with time after irradiation and was twice that of the control at 78 h. ESR spectra of skin strips showed a clear signal for the ascorbyl radical, which increased with time after irradiation in a manner similar to that of lipid peroxidation. To measure levels of glutathione (GSH) and its oxidized forms (GSSG) simultaneously, two HPLC methods, sample derivatization with 1-fluoro-2,4-dinitrobenzene and detection with a UV detector (method A) and no derivatization and detection with an electrochemical detector (method B), were compared and the latter was found to be better. No significant change was observed within 24 h after irradiation in the levels of GSH and GSSG measured by method B. The GSH/GSSG ratio may be a less sensitive parameter for the evaluation of acute oxidative stress caused by X-ray irradiation in the skin. Monitoring the ascorbyl radical seems to be a good way to evaluate oxidative stress in skin in vivo.     

Enhanced single strand breaks of supercoiled DNA in a matrix of gold nanotubes under X-ray irradiation

This work shows for the first time the potential of cobalt oxide silica (CoO(x)Si) membranes for desalination of brackish (1 wt.% NaCl), seawater (3.5 wt.% NaCl) and brine (7.5-15 wt.% NaCl) concentrations at feed temperatures between 25 and 75 °C. CoO(x)Si xerogels were synthesised via a sol-gel method including TEOS, cobalt nitrate hydrate and peroxide. Initial hydrothermal exposure (<2 days) of xerogels prepared with various pH (3-6) resulted in densification of the xerogel via condensation reactions within the silica matrix, with the xerogel synthesised at pH 5 the most resistant. Subsequent exposure was not found to significantly alter the pore structure of the xerogels, suggesting they were hydrostable and that the pore sizes remained at molecular sieving dimensions. Membranes were then synthesised using identical sol-gel conditions to the xerogel samples and testing showed that elevated feed temperatures resulted in increased water fluxes, whilst increasing the saline feed concentration resulted in decreased water fluxes. The maximum flux observed was 1.8 kg m(-2) h(-1) at 75 °C for a 1 wt.% NaCl feed concentration. The salt rejection was consistently in excess of 99%, independent of either the testing temperature or salt feed concentration.     

Chemical regulation of metal halide perovskite nanomaterials for efficient light-emitting diodes

Metal halide perovskite nanomaterials emerged as attractive emitting materials for light-emitting diodes (LEDs) devices due to their high photoluminescence quantum yield (PLQY), narrow bandwidth, high charge-carrier mobility, bandgap tunability, and facile synthesis. In the past few years, it has been witnessed an unprecedented advance in the field of metal halide perovskite nanomaterials based LEDs (PeLEDs) with a rapid external quantum efficiency (EQE) increase from 0.1% to 14.36%. From the viewpoint of material chemistry, the chemical regulation of metal halide perovskite nanomaterials made a great contribution to the efficiency improvement of PeLEDs. In this review, we categorize the strategies of chemical regulation as A-site cation engineering, B-site ion doping, X-site ion exchange, dimensional confinement, ligand exchange, surface passivation and interface optimization of transport layers for improving the EQEs of PeLEDs. We also show the potentials of chemical regulation strategies to enhance the stability of PeLEDs. Finally, we present insight toward future research directions and an outlook to further improve EQEs and stabilities of PeLEDs aiming to practical applications.     

Novel enhancement of the reducing ability of ytterbium diiodide by irradiation with near-UV light

Irradiation with near-UV light, dramatically enhances the reducing ability of ytterbium diiodide (YbI₂). Organic bromides, iodides, tosylates, and tellurides are reduced efficiently by a YbI₂-hv system, while these can not be reduced with YbI₂ in the dark.     

Site modification of K atoms in solid Ar by X-ray and light irradiation

The influence of X-ray irradiation on the optical absorption of K-atoms in Ar-matrices was studied as a function of time and temperature. Exponential decrease of the so-called red and blue triplet absorptions was observed. Simultaneously a new absorption in the range of the red triplet was built up. The new absorption could alternatively be produced by light irradiation into the red or the blue triplet, as was shown in a second experiment studying correlated optical and ESR-absorption. After annealing at 15 K the new absorption disappeared, and the original absorptions were largely restored. All experimental results can well be understood in terms of exciton production, self-trapping, and deexcitation, and are described by a master equation system.     

A high-performance X-ray system for medical device irradiation

A new concept of X-ray irradiator for low-density products on pallets is proposed. Monte Carlo simulations are applied to predict the performance of this system. The Monte Carlo predictions reveal in good agreement with experimental data obtained using products of different densities.     

Chemical enhancement method for the determination of mercury by spectrophotometry after iodide extraction

A selective and sensitive spectrophotometric method for the determination of 0.08-2.5 ppb of mercury(II) is described. Mercury is extracted as tetraiodomercury(II)-Cd-phenanthroline ion-pair into benzene and selectively stripped into EDTA. The iodide associated with mercury present in the stripping is oxidized to iodate and then treated with excess iodide to give iodine. The iodine formed is extracted into benzene and equilibrated with iodate in acidic medium in the presence of chloride and Rhodamine 6G for the formation of ICI(-)(2) species and its extraction as ion-pair with Rhodamine 6G. Determination is completed by measuring the absorption of the extract at 535 nm. The coefficient of variation is 1.5% for 10 determinations of 200 ng of mercury. The method has been applied to establish the mercury content of natural waters and chloralkali plant effluent.     

Temperature effect on the chemical composition of a polytetrafluoroethylene surface under the irradiation of synchrotron radiation by means of the X-ray photoelectron spectroscopy

The chemical composition and components of a polytetrafluoroethylene (PTFE) surface was investigated as a function of the temperature under the irradiation of synchrotron radiation (SR) by the X-ray photoelectron spectroscopy (XPS). When the temperature of PTFE under the SR irradiation was less than 100 °C, the C-rich surface appeared. With increasing the temperature more than 150 °C, the relative intensity of the F 1s peak to the C 1s peak increased markedly. At the temperatures of 150–180 °C, the C–C component became small and the CF₂ component was dominant. With further increasing the temperature more than 200 °C, CF₃, CF and C–CF components grew in addition to CF₂ component. Based on these XPS results, the temperature effect on the chemical composition and components is discussed.     

X射线荧光光谱法测定钠冰晶石的主要化学成分

选用国家标准样品和高纯物质配制实验用标准样品,采用混合熔剂(67%Li_2B_4O_7+33%LiBO_2)熔融制样,使用X射线荧光光谱法测定钠冰晶石中SiO_2、Fe_2O_3、MgO、CaO、K_2O、TiO_2、P_2O_5、Na、F、Al各组分的含量,实验结果表明,各组分的相对标准偏差(RSD)在0.57%～6.5%,与第三方实验室对比测定结果表明,方法可以满足工厂检测要求。     

微波辐射催化合成肉桂酸苄酯

肉桂酸苄酯是一种具有弱苏合香、花香等香气的香料,主要用于配制龙蜒香,在东方型香脂中作为定香剂,也可用作皂用、化妆用及果实香精的调香配料。肉桂酸苄酯的合成,在工业上,主要采用肉桂酸钠与氯化苄在二乙胺作用下反应,反应时间长达17h,产率80％以上。近年来的研究