Water/ionic liquid interfaces as fluid scaffolds for the two-dimensional self-assembly of charged nanospheres

Liquid-liquid interfaces formed between water and ionic liquids serve as fluid scaffolds to self-assemble anionic nanospheres two-dimensionally. When aqueous dispersions of anionic fluorescent polystyrene nanospheres (diameter ～500 nm) are layered on ionic liquids, ordered monolayers are spontaneously formed at the interface. Fluorescent nanospheres are hexagonally packed in the interfacial monolayers, as observed by confocal laser scanning microscopy (CLSM). The adsorption and alignment of nanospheres at the interface are affected by the ionic strength and pH of the aqueous phase, indicating electrostatic interaction as the primary driving force for the self-assembly. CLSM observation of the water/ionic liquid interface reveals that the lower hemisphere of nanospheres is exposed to the ionic liquid phase, which effectively alleviates lateral electrostatic repulsion between charged nanospheres and promotes their close packing. The densely packed monolayer structure of nanospheres is stably immobilized on the surface of CLSM glass dishes simply by rinsing the ionic liquid layer with pure water, probably as a consequence of the gluing effect exerted by imidazolium cations. The fluidic nature of the water/ionic liquid interface facilitates the diffusion and ordering of nanospheres into a hexagonal lattice, and these features render the interface promising soft scaffolds to self-assemble anionic nanomaterials two-dimensionally.     

室温下Kelvin探针力显微镜分析离子液体的界面

研究离子液体阳离子和阴离子在界面的排列具有意义,因为它们能够影响离子液体在界面的表面结构和属性。作为一种扫描探针显微技术,Kelvin探针力显微镜（KPFM）在本文中被用于室温下离子液体界面性质的研究。离子液体氯化（1-丁基-3-甲基咪唑）（[Bmim]Cl）在本文中被用作研究对象。实验中,[Bmim]Cl被选择性地固定在亲液的化学修饰表面,形成超薄的固态吸附层和液滴。由于表面电势能够用于直接指示表面偶极子,因而对于检测分子的取向十分有用。利用KPFM获得的表面电势图表明[Bmim]Cl离子液体在气液界面（当离子液体以液滴形式存在）和气固界面（当离子液体以固态吸附层形式存在）呈现出不同的分子排列。我们的研究表明Kelvin探针力显微镜能够用于表征离子液体在界面的分子排列。     

离子液体表面活性剂1-丁基-3-甲基咪唑烷基硫酸酯的合成及其在水溶液中的聚集行为

采用离子交换法,由1-丁基-3甲基咪唑氯盐（C4mimCl）和烷基硫酸钠合成了一系列无卤素的阴离子表面活性离子液体—1-丁基-3-甲基咪唑烷基硫酸酯[C4mim][CnH2n 1SO4](n=8,12,16),利用表面张力仪、稳态荧光光谱等手段考察了表面活性离子液体在水溶液表面及体相中的聚集行为,结果表明,与传统无机反离子相比,有机咪唑阳离子[C4mim] 作为反离子的离子液体型表面活性剂具有较高的表面活性,[C4mim] 产生的氢键引起的抑制分子规则排列的作用小于其促进分子有序排列的疏水作用。长烷基链的阴离子是界面膜及胶束的主要组成成分,阴离子疏水烷基碳链的增长虽然可促进胶束的形成,但却在一定程度上抑制[C4mim] 离子参与界面或胶束的形成;阴离子所带烷基链越长,越不利于阳离子[C4mim]＋参与界面膜或胶束的形成,界面膜或胶束中表面活性剂排布越松散,即界面张力越大,体系中胶束聚集数较小。     

Synthesis and characterization of catalytic iridium nanoparticles in imidazolium ionic liquids

The reduction of [Ir(cod)Cl](2) (cod=1,5-cyclooctadiene) dissolved in 1-n-butyl-3-methyl tetrafluoroborate, hexafluorophosphate and trifluoromethane sulphonate ionic liquids in the presence of 1-decene by molecular hydrogen produces Ir(0) nanoparticles. The formation of these nanoparticles follows the two-step [A-->B, A+B-->2B (k(1),k(2))] autocatalytic mechanism. The same mean diameter values of around 2-3 nm were estimated from in situ TEM and SAXS analyses of the Ir(0) nanoparticles dispersed in the ionic liquids and by XRD of the isolated material. XPS and EXAFS analyses clearly show the interactions of the ionic liquid with the metal surface demonstrating the formation of an ionic liquid protective layer surrounding the iridium nanoparticles. SAXS analysis indicated the formation of an ionic liquid layer surrounding the metal particles with an extended molecular length of around 2.8-4.0 nm depending on the type of the anion.     

Preparation of magnetic chitosan and graphene oxide-functional guanidinium ionic liquid composite for the solid-phase extraction of protein

A series of novel cationic functional hexaalkylguanidinium ionic liquids and anionic functional tetraalkylguanidinium ionic liquids have been synthesized, and then magnetic chitosan graphene oxide (MCGO) composite has been prepared and coated with these functional guanidinium ionic liquids to extract protein by magnetic solid-phase extraction. MCGO-functional guanidinium ionic liquid has been characterized by vibrating sample magnetometer, field emission scanning electron microscopy, X-ray diffraction spectrometer and Fourier transform infrared spectrometer. After extraction, the concentrations of protein were determined by measuring the absorbance at 278 nm using an ultra violet visible spectrophotometer. The advantages of MCGO-functional guanidinium ionic liquid in protein extraction were compared with magnetic chitosan, graphene oxide, MCGO and MCGO-ordinary imidazolium ionic liquid. The proposed method has been applied to extract trypsin, lysozyme, ovalbumin and bovine serum albumin. A comprehensive study of the adsorption conditions such as the concentration of protein, the amount of MCGO-functional guanidinium ionic liquid, the pH, the temperature and the extraction time were also presented. Moreover, the MCGO-functional guanidinium ionic liquid can be easily regenerated, and the extraction capacity was about 94% of the initial one after being used three times.     

Bioelectrocatalysis in ionic liquids. Examining specific cation and anion effects on electrode-immobilized cytochrome c

Cytochrome c immobilized on alkylthiol self-assembled monolayers exhibits a characteristic Fe(II)/Fe(III) redox signal that is lost when exposed to ionic liquids composed of a butylimidazolium cation combined with either hexafluorophosphate or bis(trifluoromethylsulfonyl)imide anion. In this study it was shown that exposure to the aqueous solubilized ionic liquid components, butyl-, hexyl-, and octyl-imidazolium cations and hexafluorophosphate, tetrafluoroborate, and bis(trifluoromethylsulfonyl)imide anions, resulted in partial electrochemical signal loss. Absorbance and fluorescence measurements showed that signal loss due to the cationic ionic liquid component followed a different mechanism than that of the anionic component. Although a portion of the signal was recoverable, irreversible signal loss also occurred in both cases. The source of the irreversible component is suggested to be the loss of protein secondary structure through complexation between the ionic liquid components and the protein surface residues. The reversible electrochemical signal loss is likely due to interfacial interactions imposed between the electrode and the cytochrome heme group. The influence of the amount of exposed surface residues was explored with a simplified model protein, microperoxidase-11.     

A systematic molecular simulation study of ionic liquid surfaces using intrinsic analysis methods

In this paper, we apply novel intrinsic analysis methods, coupled with bivariate orientation analysis, to obtain a detailed picture of the molecular-level structure of ionic liquid surfaces. We observe pronounced layering at the interface, alternating non-polar with ionic regions. The outermost regions of the surface are populated by alkyl chains, which are followed by a dense and tightly packed layer formed of oppositely charged ionic moieties. We then systematically change the cation chain length, the anion size, the temperature and the molecular model, to examine the effect of each of these parameters on the interfacial structure. Increasing the cation chain length promotes orientations in which the chain is pointing into the vapor, thus increasing the coverage of the surface with alkyl groups. Larger anions promote a disruption of the dense ionic layer, increasing the orientational freedom of cations and increasing the amount of free space. The temperature had a relatively small effect on the surface structure, while the effect of the choice of molecular model was clearly significant, particularly on the orientational preferences at the interface. Our study demonstrates the usefulness of molecular simulation methods in the design of ionic liquids to suit particular applications.     

Molecular Dynamics Simulation of the Ionic Liquid 1-n-Butyl-3-Methylimidazolium Methylsulfate [Bmim][MeSO4]: Interfacial Properties at the Silica and Vacuum Interfaces

Molecular dynamics simulations are done to investigate the structure and dynamics of a thin [Bmim][MeO₄] film in contact with a hydroxylated silica surface on one side and with vacuum on the other. An examination of the microscopic structure of ionic liquid (IL) film shows that strong layered anionic/cationic structures are formed at both interfaces. At the silica interface, the imidazolium rings are closer to the silica surface (compared to anions) and are coplanar with it. At the vacuum interface, the charged imidazolium ring more concentrates in the interior of the film, but the butyl side chain stretches out toward the vacuum interface. While there exists an excess concentration of the cations at the silica interface, at the vacuum interface an excess concentration of anions (dissolved in the butyl chain) is found. The influence of the interface on the dynamical properties is shown to depend on their time scales. A short-time dynamical property, such as hydrogen bond formation is not noticeably perturbed at the interface. In contrary, long-time properties such as ion-pair formation/rupture and translation of ions across the film are largely decelerated at the silica interface but are accelerate at the vacuum interface. Our findings indicate that the structural relaxation time of ion-pairs, is comparable to diffusion time scale in the IL film. Therefore, ion-pairs are not stable species; the IL is composed of short-lived ion-pairs and freely diffusing ions. However, the structural relaxation times of ion-pairs is still long enough (comparable to the time scale of diffusion) to conclude that correlated motions of counterions influence the macroscopic properties of IL, such as diffusion and ionic conductivity. In this respect, we have shown that correcting the Nernst-Einstein equation for the joint translation of ion-pairs considerably improves the accuracy of calculated ionic conductivities.     

Kinetics of ion transfer at the ionic liquid/water nanointerface

Ion transfer (IT) processes in ionic liquids (ILs) are essential for their applications in electrochemical systems and chemical separations. In this Article, the first measurements of IT kinetics at the IL/water interface are reported. Steady-state voltammetry was performed at the nanometer-sized polarizable interface between water and ionic liquid, [THTDP(+)][C(4)C(4)N(-)], immiscible with it that was formed at the tip of a nanopipet. Kinetic measurements at such interfaces are extremely challenging because of slow mass-transfer rates in IL, which is ～700 times more viscous than water. The recently developed new mode of nanopipet voltammetry, common ion voltammetry, was used to overcome technical difficulties and ensure the reliability of the extracted kinetic parameters of IT. The results suggest that the rate of interfacial IT depends strongly on solution viscosity. Voltammetric responses of nanopipets of different radii were analyzed to evaluate the effect of the electrical double layer at the liquid/liquid interface on IT kinetics. The possibility of the influence of the charged pipet wall on ion transport was investigated by comparing currents produced by cationic and anionic species. Possible effects of relaxation phenomena at the IL/water interface on IT voltammograms have also been explored.     

Layering at an ionic liquid-vapor interface: a molecular dynamics simulation study of [bmim][PF6

The structure of the planar liquid-vapor interface of a room-temperature ionic liquid, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), is studied using atomistic molecular dynamics simulations. Layering of the ions at the interface is observed as oscillations in the corresponding number density profiles. These oscillations, however, are diminished in amplitude in the electron density profile, due to a near cancellation in the contributions from the anions and the cations. An enhancement by 12% in the electron density at the interface over its value in the bulk liquid is observed, in excellent agreement with X-ray reflectivity experiments. The anions are found to predominantly contribute to this increase in the interfacial electron density. The cations present at the interface are oriented anisotropically. Their butyl chains are observed to be preferentially oriented along the interface normal and to project outside the liquid surface, thus imparting a hydrophobic character. In the densest region of the interface, the imidazolium ring plane is found to lie parallel to the surface normal, in agreement with direct recoil spectroscopy experiments.     

Effect of ultraviolet absorption reagent for determination of piperidinium ionic liquid cations by ion pair chromatography with indirect ultraviolet detection

Indirect ultraviolet detection method is a simple and effective method for the determination of ionic liquid cations without ultraviolet absorption group. This paper focused on the influence of different background ultraviolet absorption reagents on the determination of piperidinium ionic liquid cations by ion pair chromatography with indirect ultraviolet detection. Ultraviolet absorption reagents are divided into cationic (4-aminophenol hydrochloride, 1-ethyl-3-methylimidazolium tetrafluoroborate, and N-ethylpyridinium tetrafluoroborate), anionic (potassium biphthalate and 5-sulfosalicylic acid), and amphiprotic (p-aminobenzoic acid). The results showed that piperidinium cations can be separated and detected by cationic and anionic ultraviolet absorption reagents. In general, the cationic ultraviolet absorption reagents have the best effect for separation and detection of the piperidinium cations by ion pair chromatography with indirect ultraviolet detection.     

Comparison between inhomogeneous adsorption of charged surfactants on air-water and on solid-water interfaces by self-consistent field theory

We use a realistic molecular model to study the interfacial behavior of hydrocarbon sulfate surfactants within a self-consistent field model and consider the adsorption both at the air-water interface and at a hydrophobic solid-water interface. We focus on the structural properties of the hemimicelles at the critical interface aggregation concentration (CIAC) for the air-water system and the critical surface aggregation concentration (CSAC) for the solid-water system. The major difference between the two systems is that the liquid interface is penetrable but the solid surface is intrinsically impenetrable for the molecular species. At the LG interface the hemimicelles have a lens shape with their centers of mass positioned slightly toward the aqueous side and feature an aspect ratio of approximately 2, with the long dimension parallel to the interface. Hemimicelle formation occurs below a critical (interfacial) area per molecule and above a critical surface pressure depending on tail length and ionic strength. Hemimicelles are not expected at air-water interfaces for a surfactant with a tail length ( t) lower than 15 CH2 units. In contrast, at a hydrophobic solid the formation of laterally inhomogeneous micelles even takes place for surfactants with the tail length as short as t = 12. This difference is attributed to the screening of the lateral interactions in the vapor phase. The shape of surface hemimicelles is caplike (or half-lens) with an aspect ratio lower than 2 and the long dimension parallel to the solid surface. The tail length, the ionic strength, the adsorption energies, and the surfactant concentration have an effect on the surface micelle properties such as the aggregation number and size and shape.     

Three-phase contact parameters measurements for silica-mixed cationic–anionic surfactant systems

The stability and interactions in thin wetting films between the silica surface and air bubble containing (a) straight chain C₁₀ amine and (b) cationic/anionic surfactant mixture of a straight chain C₁₀ amine with sodium C₈, C₁₀ and (straight chain) C₁₂ sulfonates, were studied using the microscopic thin wetting film method developed by Platikanov [D. Platikanov, J. Phys. Chem. 68 (1964) 3619]. Film lifetimes, three-phase contact (TPC) expansion rate, receding contact angles and surface tension were measured. The presence of the mixed cationic/anionic surfactants was found to lessen contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants heterocoagulation could arise through the formation of positively charged interfacial complexes. Mixed solution of cationic and anionic surfactants shows synergistic lowering in surface tension. The formation of the interfacial complex at the air/solution interface was confirmed by surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants system controls the strength of the interfacial complex. The observed phenomena were discussed in terms of the electrostatic heterocoagulation theory, where the interactions can be attractive or repulsive depending on the different surface activity and charge of the respective surfactants at the two interfaces.     

Interfacial phase transitions in conducting fluids

We present a review, largely based on recent experimental work of our group, on phase transitions at interfaces of fluid metals, alloys and ionic liquids. After a brief analysis of possible experimental errors and limitations of surface sensitive methods, we first deal with first-order wetting transitions at the liquid/vapour and liquid/wall interface in systems such as Ga-based alloys, K-KCl melts, and fluid Hg. The following chapter refers to surface freezing or surface induced crystallization in different metal alloys. The respective surface phase diagrams are discussed in comparison with their bulk counterpart. In the last part we present very recent investigations of ionic liquid interfaces, including order-disorder transitions at the liquid/vapour interface and examples of two-dimensional phase transitions at the electrified ionic liquid/metal interface. Finally, a simple electrowetting experiment with an ionic liquid droplet under vacuum is described which gives new insight into the contact angle saturation problem. The article ends up with a few perspective remarks on open problems and potential impact of interfacial phenomena on applied research.     

Interfacial microgels formed by oppositely charged polyelectrolytes and surfactants. 1. Influence of polyelectrolyte molecular weight

The synergistic adsorption and complexation of polystyrene sulfonate, PSS (a highly charged anionic polyelectrolyte), and dodecyltrimethylammonium bromide, C12TAB (a cationic surfactant), at the air-water interface can lead to interfacial gels that strongly influence foam-film drainage and stability. The formation and characteristics of these gels have been studied as a function of PSS molecular weight by combining surface tension, ellipsometry, and foam-film drainage experiments. Simultaneously the solution electromotive force has been measured to track the polymer-surfactant interactions in the bulk solution. It has been found that there is a critical molecular weight for surface gelation as well as for bulk precipitation and aggregation. Furthermore, we show that for the lowest molecular weights, PSS adsorbs with C12TAB in compact layers at the air-water interface. In particular, for mixtures of C12TAB with the monomer compound of the PSS repeat unit (e.g. Mw = 208), interfacial complexation is found to be similar to that of catanionic mixtures (mixtures of surfactants of opposite charge).     

The influence of mixed cationic–anionic surfactants on the three-phase contact parameters in silica–solution systems

The formation of thin wetting films on silica surface from aqueous solution of (a) tetradecyltrimetilammonium bromide (C₁₄TAB) and (b) surfactant mixture of the cationic C₁₄TAB with the anionic sodium alkyl- (straight chain C₁₂–, C₁₄– and C₁₆–) sulfonates, was studied using the microscopic thin wetting film method developed by Platikanov. Film lifetimes, three-phase contact (TPC) expansion rates, receding contact angles and surface tension were measured. It was found that the mixed surfactants caused lower contact angles, lower rates of the thin aqueous film rupture and longer film lifetimes, as compared to the pure C₁₄TAB. This behavior was explained by the strong initial adsorption of interfacial complexes from the mixed surfactant system at the air/solution interface, followed by adsorption at the silica interface. The formation of the interfacial complexes at the air/solution interface was proved by means of the surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants controls the strength of the interfacial complex and causes synergistic lowering in the surface tension. The film rupture mechanism was explained by the heterocoagulation mechanism between the positively charged air/solution interface and the solution/silica interface, which remained negatively charged.     

羧基功能化离子液体表面修饰TiO2纳米微粒的制备及结构表征

本文用沉淀法制备了羧基功能化离子液体表面修饰半导体TiO2纳米颗粒, 并用FTIR, TEM, XRD和XPS对其结构进行了表征. 初步探讨了羧基功能化离子液体修饰TiO2纳米微粒的形成机理.     

Surfactant behavior of "ellipsoidal" dicarbollide anions: a molecular dynamics study

We report a molecular dynamics study of cobalt bis(dicarbollide) anions [(B(9)C(2)H(8)X(3))(2)Co](-) (XCD(-)) commonly used in liquid-liquid extraction (X = H, Me, Cl, or Br), showing that these anions, although lacking the amphiphilic topology, behave as anionic surfactants. In pure water, they display "hydrophobic attractions", leading to the formation of aggregates of different sizes and shapes depending on the counterions. When simulated at a water/"oil" interface, the different anions (HCD(-), MeCD(-), CCD(-), and BrCD(-)) are found to be surface active. As a result, the simulated M(n+) counterions (M(n+) = Na(+), K(+), Cs(+), H(3)O(+), UO(2)(2+), Eu(3+)) concentrate on the aqueous side of the interface, forming a "double layer" whose characteristics are modulated by the hydrophobic character of the anion and by M(n+). The highly hydrophilic Eu(3+) or UO(2)(2+) cations that are generally "repelled" by aqueous interfaces are attracted by dicarbollides near the interface, which is crucial as far as the mechanism of assisted cation extraction to the oil phase is concerned. These cations interact with interfacial XCD(-) in their fully hydrated Eu(H(2)O)(9)(3+) and UO(2)(H(2)O)(5)(2+) forms, whereas the less hydrophilic monocharged cations display intimate contacts via their X substituents. The results obtained with the TIP3P and OPLS models for the solvents are confirmed with other water models (TIP5P or a polarizable 4P-Pol water) and with more polar "oil" models. The importance of interfacial phenomena is further demonstrated by simulations with a high oil-water ratio, leading to the formation of a micelle covered with CCD's. We suggest that the interfacial activity of dicarbollides and related hydrophobic anions is an important feature of synergism in liquid-liquid extraction of hard cations (e.g., for nuclear waste partitioning).     

Paramagnetic surface active ionic liquids: synthesis,properties, and applications

Paramagnetic surface active ionic liquids (PMSAILs) classify task-specific ionic liquids with magnetic properties by incorporating metal into the cationic or anionic part of the ionic liquid. Paramagnetic ionic liquids had long-chain either in cations or anions and showed excellent surface activity and magnetic properties without any need for the magnetic nanoparticles. These PMSAILs have inherent unique ionic liquid properties and self-assembled into various nano-aggregates such as micelles, vesicles, rod-like micelles, and etc., by modification in the structure of cations or anions. PMSAILs provide stimuli-responsive properties, which is one of the essential aspects of targeted applications. The appropriate functional tunability of anions and cations in PMSAILs leads to various multifaceted chemical and biological applications. A new emerging trend in PMSAIL research is hybridization with flexible materials. This review will mainly deal with the synthesis, characterization, and brief history of PMSAILs and their potential advantages in the various applications in micellar catalysis, purification and separation of biomolecules, compaction and decompaction of DNA, drug delivery, and other biomedical applications.     

Interactions in Calcium Oxalate Hydrate/Surfactant Systems

Phase transformation of calcium oxalate dihydrate (COD) into the thermodynamically stable monohydrate (COM) in anionic (sodium dodecyl sulfate (SDS)) and cationic (dodecylammonium chloride) surfactant solutions has been studied. Both surfactants inhibit, but do not stop transformation from COD to COM due to their preferential adsorption at different crystal faces. SDS acts as a stronger transformation inhibitor. The general shape of adsorption isotherms of both surfactants at the solid/liquid interface is of two-plateau-type, but differences in the adsorption behavior exist. They originate from different ionic and molecular structures of crystal surfaces and interactions between surfactant headgroups and solid surface. Copyright 1999 Academic Press.