An efficient synthesis of propargylamines via three-component coupling of aldehydes, amines and alkynes catalyzed by nanocrystalline copper(II) oxide

An efficient three-component coupling of aldehydes, amines and alkynes to prepare propargylamines, in nearly quantitative yields using nanocrystalline CuO as a catalyst is described. Structurally divergent aldehydes and amines were converted to the corresponding propargylamines. The reaction does not require any co-catalyst. After completion of the reaction, the catalyst was recovered by centrifugation and reused several times with only a slight decrease of activity observed under the same reaction conditions.     

Gold(III) (C^N) complex-catalyzed synthesis of propargylamines via a three-component coupling reaction of aldehydes, amines and alkynes

Propargylamines are synthesized in high yields via a gold(III) (C^N) complex-catalyzed three-component coupling reaction of aldehydes, amines and alkynes in water at 40 °C. Excellent diastereoselectivities (up to 99:1) have been achieved when chiral prolinol derivatives are employed as the amine component. Notably, the [Au(C^N)Cl₂] complex (N^CH = 2-phenylpyridine) could be repeatedly used for 10 reaction cycles, leading to an overall turnover number of 812.     

A novel and convenient copper-catalyzed three-component coupling of aldehydes, alkynes, and hydroxylamines leading to propargylamines

The first copper-catalyzed direct three-component coupling reaction of aldehydes, alkynes, and hydroxylamines for the synthesis of propargylamines has been developed under mild conditions, which has the advantages of ready availability of catalyst as well as operation simplicity. The present protocol provides an appealing alternative for the construction of propargylamines in a simple and one-pot procedure.     

Chiral tris(oxazoline)/Cu(II) catalyzed coupling of terminal alkynes and nitrones

Novel chiral iPr-tris(oxazoline)/Cu(ClO4)2 x 6H2O catalyzed coupling of terminal acetylenes and nitrones to afford cis-disubstituted beta-lactams is described; the choice of base proves essential to both the diastereoselectivity and the enantioselectivity.     

Synthesis of triazoles from nonactivated terminal alkynes via the three-component coupling reaction using a Pd(0)-Cu(I) bimetallic catalyst

The synthesis of triazoles via the three-component coupling reaction of unactivated terminal alkynes, allyl carbonate, and trimethylsiyl azide under the Pd(0)-Cu(I) bimetallic catalyst is developed. The reaction most probably proceeds through the formation of a pi-allylpalladium azide complex and a copper-acetylide followed by a successive [3 + 2] cycloaddition. The deallylation of the resulting allyltriazoles proceeds very easily by the Ru-catalyzed isomerization followed by the ozonolysis of the resulting propenyltriazoles to give the triazoles in high yields.     

Efficient nickel catalyst for coupling of acetonitrile with aldehydes

A Ni complex of a diarylamido-based PNP ligand is an efficient and robust catalyst for coupling of acetonitrile with aldehydes.     

A simple catalyst system for the palladium-catalyzed coupling of aryl halides with terminal alkynes

A convenient catalyst system consisting of Pd(OAc)₂, PPh₃, K₃PO₄ and DMSO was found to be effective for the coupling reaction of aryl halides with terminal alkynes as well as the deacetonative coupling reaction using a 4-aryl-2-methylbut-3-yn-2-ol as a terminal alkyne precursor. An iminophosphine as a ligand worked more effectively for some combination of substrates than triphenylphosphine.     

A novel three-component one-pot reaction involving alkynes, urea or thiourea, and aldehydes

A novel three-component, one-pot condensation yielding 2-amino-4H-1,3-oxazines or 2-amino-4H-1,3-thiazines from alkynes, urea or thiourea, and aldehydes is described. [reaction: see text]     

Heterogeneous gold(I)-catalyzed three-component reaction of aldehydes,alkynes, and orthoformates toward propargyl ethers

Abstract

A novel and efficient heterogeneous gold(I)-catalyzed three-component reaction of aldehydes, alkynes, and orthoformates has been developed that proceeds smoothly in dichloroethane (DCE) at 83?°C in the presence of 5?mol% magnetic nanoparticles-anchored phosphine gold(I) complex (Fe₃O₄@SiO₂-P-AuOTf) and offers a general and practical approach for the preparation of a variety of propargyl ethers with good yields. This heterogeneous gold(I) catalyst can be facilely recovered by simply applying an external magnetic field and recycled at least eight times without any apparent decrease in the catalytic efficiency.     

Copper-catalyzed three-component coupling of arynes, terminal alkynes and activated alkenes

The three-component coupling of benzynes with terminal alkynes and activated alkenes in the presence of CuI, PCy(3) and CsF in a 1:1 mixture of CH(3)CN and THF at 50 degrees C for 5 h gave 1-alkyl-2-alkynylbenzenes in good to moderate yields.     

Cu(II) bromide catalyzed oxidation of aldehydes and alcohols

A variety of aromatic, aliphatic and conjugated aldehydes and alcohols were transformed to the corresponding carboxylic acids and ketones with a quantitative conversion in high yields with 70% t‐BuOOH solution in water in the presence of catalytic (5 mol%) amounts of CuBr₂ under room temperature conditions. The conversion of 4‐methoxybenzaldehyde to 4‐methoxybenzoic acid is extremely facile in MeCN at ambient temperature in the presence of 5 mol% CuBr₂ and 2 equiv. 70% t‐BuOOH (water) as the oxidant. Oxidation with t‐BuOOH (water) alone in MeCN was found to be negligible. The scope of our catalytic system is applicable for a wide range of aromatic, conjugated and aliphatic substrates. These aldehydes were converted to the corresponding carboxylic acids in good isolated yields in reasonable times. It is pertinent to mention here that mild halogenic oxidants like hypochlorites, chlorites and NBS are not suitable for substrates with electron‐rich aromatic rings, olefinic bonds and secondary hydroxyl groups. Substitutions at different positions on the phenyl ring do not hinder the reaction, although the reaction time is affected. Oxidation of α,β unsaturated derivatives resulted in the formation of the expected acid in good yield. In addition, the transformation of secondary alcohols to ketones is extremely facile. No recemization was observed for menthone. This method possesses a wide range of capabilities since it can be used with other functional groups which may not tolerate oxidative conditions, involves fairly simple method for work‐up, exhibits chemoselectivity and proceeds under ambient conditions. The resulting products are obtained in good yields within reasonable time. Copyright © 2011 John Wiley & Sons, Ltd.     

Highly selective catalytic intermolecular reductive coupling of alkynes and aldehydes

Alkynes (internal and terminal) and aldehydes (aromatic and aliphatic) are reductively coupled in a single catalytic reaction to yield di- and trisubstituted allylic alcohols with high stereoselectivity and regioselectivity. In most cases, a 1:1 ratio of alkyne to aldehyde is sufficient for efficient coupling. The yield and regioselectivity are strongly dependent on the phosphine ligand, but the allylic alcohols formed are invariably the products of cis addition to the alkyne.     

Reductive coupling reaction of aldehydes using indium(III) triflate as the catalyst

A reductive coupling reaction was effectively developed to convert an aldehyde to its symmetrical ether. The successful reactions required Et₃SiH and CH₂Cl₂ as the suitable solvent in the presence of a catalytic amount of In(OTf)₃. Various aldehydes were subjected to the method, and each afforded the expected ethers in good to excellent yields.     

Palladium(II)-catalyzed three-component coupling reaction initiated by acetoxypalladation of alkynes: an efficient route to gamma,delta-unsaturated carbonyls

[formula: see text] A divalent palladium-catalyzed coupling reaction of electron-deficient alkynes and acrolein or MVK (methyl vinyl ketone) was developed. The reaction provides an efficient method to synthesize gamma,delta-unsaturated carbonyls. A mechanism involving acetoxypalladation of alkyne, followed by insertion of alkene and protonolysis of the C-Pd bond, is proposed. The protonolysis of the carbon-palladium bond with the assistance of bidentate nitrogen containing ligands is the key step in this tandem reaction.     

A SeCSe-Pd(II) pincer complex as a highly efficient catalyst for allylation of aldehydes with allyltributyltin

An air- and moisture-stable SeCSe-Pd(II) pincer complex was synthesized and found to catalyze the nucleophilic allylation of aldehydes with allyltributyltin. The allylation of a variety of aromatic and aliphatic aldehydes to give the corresponding homoallyl alcohols was performed at room temperature to 60 degrees C in yields ranging from 50% (for typical aliphatic aldehydes) to up to 97% (for aromatic aldehydes) using 5 x 10(-3) to 1 mol % of the Pd catalyst. NMR spectroscopic study indicated that a sigma-allylpalladium intermediate was formed and possibly functions as the nucleophilic species that undergoes addition to the aldehydes.     

Iridium as a general catalyst for the decarbonylative addition of aldehydes to alkynes

A general catalytic system for the decarbonylative addition reaction of aldehydes with alkynes is developed by using an iridium catalyst system. Both aromatic and aliphatic aldehydes reacted with terminal alkynes efficiently to give the corresponding olefination products in high yields and up to 11:1 E/Z selectivity.     

Pybox ligand-promoted copper(I)-catalyzed three-component tandem coupling-annulation of terminal alkynes, amines and ortho-alkynylaryl aldehydes

Pybox ligand was utilized to promote a highly efficient, one-pot, copper(I)-catalyzed three-component tandem addition and cyclization of ortho-alkynylaryl aldehydes, primary amines, and terminal alkynes. Dihydroisoquinoline derivatives 2 were achieved with excellent to moderate yields. In some examples, water was found as an additive to activate the reaction with or without Pybox ligand. Compared with the reported methods, in which imine had to be pre-prepared and purified, the novel process provides a greener choice.     

Palladium-catalyzed three-component coupling reaction of organic halides, norbornadiene and terminal alkynes

A three-component coupling reaction of organic halides, including aryl halides, methyl iodine, alkenyl iodine and bromoalkynes, with norbornadiene and terminal alkynes catalyzed by a palladium complex and a phase transfer agent in the presence of aqueous NaOH gave 5,6-disubstituted norbornene derivatives in good yields.     

Microwave-assisted one-pot three-component polymerization of alkynes,aldehydes and amines toward amino-functionalized optoelectronic polymers

We present a microwave-assisted one-pot polymerization with three-components of alkynes, aldehydes and amines for the synthesis of new amino-functionalized optoelectronic polymers. The polymerization of diynes(1a-1c), dialdehydes(2a and 2b) and dibenzylamine catalyzed by InCl_3 was carried out smoothly within 1h under microwave radiation, yielding four soluble polymers with high molecular weights. The resulting polymers P1 and P2 could be easily dissolved in alcohol and thus utilized as the cathode interlayer for polymer solar cells(PSCs). Compared with the control device, the PSCs with P1 and P2 as the cathode interlayer and PTB7-Th:PC_(71)BM as the photoactive layer exhibited significantly higher power conversion efficiencies(PCEs) of 9.49% and 9.16%, respectively. These results suggest that this polycoupling reaction is an efficient approach to construct three-component polymers for the practical applications.