Task-specific ionic liquid trioctylmethylammonium salicylate as extraction solvent for transition metal ions

A quaternary ammonium-based room temperature ionic liquid trioctylmethylammonium salicylate (TOMAS) has been studied as an extractant of transition metal ions (Fe³⁺, Cu²⁺, Ni²⁺, Mn²⁺) in aqueous solutions. The effect of pH value on the recovery of metal ions has been investigated. The mechanism of extraction into the ionic liquid has been proposed. The possibility of stripping voltammetric determination of transition metals in aqueous solutions using TOMAS-modified electrodes has been demonstrated.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Transition metal ions in black tea: an electron paramagnetic resonance study

Tea (Camellia Sinensis) is the most widely consumed beverage in the world and is known to have therapeutic, antioxidant and nutritional effects. It contains dimeric flavanols and polyphenols which are known as the most important organic compounds in tea infusions, and can make strong and stable complexes with metal ions. In this study, we carried out a series of electron paramagnetic resonance experiments on well-known paramagnetic transition metal ions, namely Mn²⁺, Fe³⁺, Cu²⁺, VO²⁺, and Cr³⁺ doped in black tea cultivated along the shore of Black Sea, Turkey, to see the effects and structures formed.     

Synthesis and characterization of a novel copolymer of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) and application in heavy metal ion removal from water

We demonstrate synthesis of water insoluble, novel copolymer P_A1 from condensation of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) monomers having high capacity to remove metal ions from aqueous solution. The presence of a high atomic percentage of nitrogen and sulfur atoms in P_A1 leads to strong ligating ability with metal ions. The monomers and the polymer have been characterized by FTIR, UV–Visible spectroscopy, CHNS elemental analysis, NMR, MALDI-MS, and TG/DTA. As a proof of concept, the P_A1 is tested for its ability to remove heavy metal ions Cu²⁺, Co²⁺, Fe²⁺, Ni²⁺, Mn²⁺, and CrO ₇ ^2? from aqueous solutions. P_A1 efficiently removed metals ions from the metal solutions. The highest absorption ability has been observed toward the iron salts where 0.969 g metal salt is absorbed by 1 g polymer. This study has implication for inexpensive and efficient polymer for purification of water.     

Stability of transition metal complexes with sulfonated polymers

Stability constants of macromolecular metallocomplexes of transition metal ions (Ag⁺, Cu²⁺, Ni²⁺, Fe³⁺) with sulfonated polymers in water and aqueous HCl and NaCl solutions were determined from quenching by transition metal ions of the luminescence of macromolecules labeled with luminescent groups.     

Binding heavy metal ions with polymerized onion skin

Red onion skin is highly effective for binding heavy metal ions from aqueous solutions. Color leaching can be prevented and the physical characteristics of the substrate can be improved by treatment with formaldehyde in an acidic medium. Batch and column experiments have been conducted with Cu²⁺, Cd²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Pb²⁺. Almost quantitative removal of the metal ions from solution can be achieved by using columns of the treated onion skin. Competition of the various metal ions for the substrate has been investigated. The capacity of the substrate in the majority of the metal ions studied is well above 1 meq/g. The use of polymerized onion skin to remove heavy metal ions from domestic and industrial wastewater to safe levels has been recommended as a cheap and effective alternative for commercial ion-exchange resins.     

Transition Metal Ions: Charge Carriers that Mediate the Electron Capture Dissociation Pathways of Peptides

Electron capture dissociation (ECD) of model peptides adducted with first row divalent transition metal ions, including Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, were investigated. Model peptides with general sequence of ZGGGXGGGZ were used as probes to unveil the ECD mechanism of metalated peptides, where X is either V or W; and Z is either R or N. Peptides metalated with different divalent transition metal ions were found to generate different ECD tandem mass spectra. ECD spectra of peptides metalated by Mn²⁺ and Zn²⁺ were similar to those generated by ECD of peptides adducted with alkaline earth metal ions. Series of c-/z-type fragment ions with and without metal ions were observed. ECD of Fe²⁺, Co²⁺, and Ni²⁺ adducted peptides yielded abundant metalated a-/y-type fragment ions; whereas ECD of Cu²⁺ adducted peptides generated predominantly metalated b-/y-type fragment ions. From the present experimental results, it was postulated that electronic configuration of metal ions is an important factor in determining the ECD behavior of the metalated peptides. Due presumably to the stability of the electronic configuration, metal ions with fully-filled (i.e., Zn²⁺) and half filled (i.e., Mn²⁺) d-orbitals might not capture the incoming electron. Dissociation of the metal ions adducted peptides would proceed through the usual ECD channel(s) via “hot-hydrogen” or “superbase” intermediates, to form series of c-/z ^•- fragments. For other transition metal ions studied, reduction of the metal ions might occur preferentially. The energy liberated by the metal ion reduction would provide enough internal energy to generate the “slow-heating” type of fragment ions, i.e., metalated a-/y- fragments and metalated b-/y- fragments.     

Biosorption of Heavy Metal Ions (Cu2+, Mn2+, Zn2+, and Fe3+) from Aqueous Solutions Using Activated Sludge: Comparison of Aerobic Activated Sludge with Anaerobic Activated Sludge

The potential of using two different kinds of air drying of activated sludge (aerobic activated sludge and anaerobic activated sludge) for the removal of Cu²⁺, Mn²⁺, Zn²⁺, and Fe³⁺ from aqueous solutions was assessed. Results indicated that the maximum biosorption occurred at pH?=?5.0 for Cu²⁺, Zn²⁺, and Mn²⁺ and pH?=?3.0 for Fe³⁺. The kinetic parameters of biosorption data were found to be best fitted to the second-order equation. Also, it was found that the best dosage for biosorption was 0.2?g for both aerobic activated sludge and anaerobic activated sludge. The experimental results were fitted well to the Langmuir, Freundlich, and Dubinin?CRadushkevich (D-R) isotherms. The maximum biosorption capacities of Cu²⁺, Mn²⁺, Zn²⁺, and Fe³⁺ for aerobic activated sludge were 65.789, 44.843, 64.935, and 75.756?mg/g, respectively, while they were 59.880, 49.020, 62.500, and 69.444?mg/g for anaerobic activated sludge, respectively. The mean free energy values evaluated from the D-R model indicated that the biosorptions of studied heavy metal ions onto activated sludge were taken place by chemical interaction. The results of this study provided valuable information on the biosorption of heavy metals by activated sludge that may contribute in wastewater treatment.     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

SYNTHESIS OF MACROPOROUS HUMIC ACID RESINS AND THEIR CHELATING PROPERTIES FOR HEAVY METAL IONS

Macroporous HA resins (HAR) can be prepared in pearl form by grafting HA onto crosslinked PS through azo or through ester and / or ether linkages. At pH 13 and the HA / PSNH_2 weight ratio 0.7—1.0, PSN_2~+-Cl~-couples with HA and results in the formation of a7o-type HA resin (HAR-A), which shows good adsorbility towards heavy metal ions. The Cu~(2+) sorption capacity of ester / ether type humic acid resin (HAR-E) is increased by lengthening the reaction time of HA and PSCH_2Cl. The structure of HAR is discussed on the basis of the IR spectra. The sorption capacity of HAR-A is 1.01 mmol / g for Cd~(2+) and 0.6—0.53 mmol/g for Ni~(2+), Mn~(2+), Cu~(2+), Co~(3+) and Zn~(2+). respectively. The calculated distribution coefficients of heavy metal ions on HAR-A can be arranged in the following order: Cu~(2+)(8.7×10~3)>Cd~(2+) (3.8×10~2)>Zn~(2+)(2.4×10~2)>Ni~(2+)(1.8×10~2)>Mn~(2+)(4.9×10). At pH 6.5, Cu~(2+), Cd~(2+), Ni~(2+), Mn~(2+) can be quantitatively adsorbed by HAR-A and completely eluted with 1N HNO_3. HAR-A can be regenerated and reused. Trace quantities of the above-mentioned heavy metal ions in four samples of the natural occurring water and one sample of the tap water were analyzed by using HAR-A.     

1-(d-Glucopyranosyl-2′-deoxy-2′-iminomethyl)-2-hydroxynaphthalene as chemo-sensor for Fe in aqueous HEPES buffer based on colour changes observable with the naked eye

A new glucose-based C2-derivatized colorimetric chemo-sensor (L₁) has been synthesized by a one-step condensation of glucosamine and 2-hydroxy-1-naphthaldehyde for the recognition of transition metal ions. Among the eleven metal ions studied, viz., Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, L₁ results in visual colour change only in the presence of Fe²⁺, Fe³⁺and Cu²⁺ in methanol. However, in an aqueous HEPES buffer (pH 7.2) it is only the Fe³⁺ that gives a distinct visual colour change even in the presence of other metal ions, up to a concentration of 280 ppb. The changes have been explained based on the complex formed, and the composition has been determined to be 2:1 between L₁ and Fe³⁺ based on Job’s plot as well as ESI MS. The structure of the proposed complex has been derived based on HF/6-31G calculations.     

Synthesis of poly(hydroxamic acid) ligand from polymer grafted corn‐cob cellulose for transition metals extraction

Poly(hydroxamic acid) ligand was synthesized using ester functionalities of cellulose‐graft‐poly(methyl acrylate) copolymer, and products are characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, high‐resolution transmission electron microscopy, and X‐ray photoelectron spectroscopy analysis. The poly(hydroxamic acid) ligand was utilized for the sensing and removal of transition metal ions form aqueous solutions. The solution pH is found a key factor for the optical detection of metal ions, and the reflectance spectra of the [Cu‐ligand]ⁿ⁺ complex were observed to be the highest absorbance 99.5% at pH 6. With the increase of Cu²⁺ ion concentration, the reflectance spectra were increased, and a broad peak at 705 nm indicated that the charge transfer (π‐π transition) complex was formed. The adsorption capacity with copper was found to be superior, 320 mg g^?1, and adsorption capacities for other transition metal ions were also found to be good such as Fe³⁺, Mn²⁺, Co³⁺, Cr³⁺, Ni²⁺, and Zn²⁺ were 255, 260, 300, 280, 233, and 223 mg g^?1, respectively, at pH 6. The experimental data show that all metal ions fitted well with the pseudo‐second‐order rate equation. The sorption results of the transition metal ions onto ligand were well fitted with Langmuir isotherm model (R² > 0.98), which implies the homogenous and monolayer character of poly(hydroxamic acid) ligand surface. Eleven cycles sorption/desorption process were applied to verify the reusability of this adsorbent. The investigation of sorption and extraction efficiency in each cycle indicated that this new type of adsorbent can be recycled in many cycles with no significant loss in its original detection and removal capability. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of Hg in water and wastewater samples by CV-AAS following on-line preconcentration with silver trap

An online mercury preconcentration and determination system consisting of cold vapor atomic absorption spectrometry (CV-AAS) coupled to a flow injection (FI) method was studied. The method was developed involving the determination of ng/L levels of mercury retained on the silver wool solid sorbent. Experimental conditions such as sample volume, flow rate, stability of the column and effect of foreign ions on the determination of trace amounts of mercury were optimized. The detection limit is 3 ng/L and dynamic range 10–250 ng/L require only 50 mL of sample. The relative standard deviations (RSD) of the determinations are below 4%. The presence of common metal ions, such as K+, Na⁺, Cu²⁺, Pb²⁺, Fe³⁺, Ni²⁺, and Mn²⁺, does not interfere with the measurement of mercury by this method. The method was successfully applied to the determination of mercury in water and wastewater samples.     

State of manganese ions in the structure of corundum synthesized in supercritical water fluid

The kinetics and formation mechanism of doped corundum (α-Al₂O₃) from hydrargillite (γ-Al(OH)₃) in supercritical water fluid (SCWF) in the presence of manganese ions are studied. It was ascertained that due to the reversible dehydroxylation in an aqueous medium, solid-phase transformation of hydrargillite into boehmite (γ-AlOOH) and then into corundum occurs with the formation of well-faceted corundum micro-crystals that are uniformly doped with manganese. It was found that when Mn²⁺ or MnO₄⁻ ions are introduced into the reaction medium, Mn⁵⁺, Mn⁴⁺, Mn³⁺, and Mn²⁺ ions are observed in the synthesized corundum. Meanwhile, the manganese ions form a complex defect in the corundum structure, which comprises oxygen vacancies and hydroxyl groups. The defects in corundum that emerge upon doping with manganese in SCWF are different from those in corundum doped during high-temperature synthesis.     

Quantum yields and quantitative spectra of firefly bioluminescence with various bivalent metal ions

We measured quantitative spectra of firefly (Photinus pyralis) bioluminescence in the presence of Zn²⁺ and other bivalent metal ions to investigate the effects of these metal ions on luciferin‐luciferase reaction. We studied the dependence of the quantum yield and spectrum on quantity and kind of bivalent metal ions. Adding various amounts of Mg²⁺, Mn²⁺ and Ca²⁺ produced virtually no change in the quantum yields or the spectra of bioluminescence. In contrast, increasing amounts of ions such as Zn²⁺ and Cd²⁺ decreased quantum yields and changed the bioluminescence color from yellow‐green to red. Quantitative analysis showed that the sensitivities of the quantum yield and color to various metal ions were in the order of Hg²⁺>Zn²⁺, Cd²⁺>Ni²⁺, Co²⁺, Fe²⁺≫Mg²⁺, Mn²⁺, Ca²⁺. We propose that the changes in quantum yield and spectrum caused by the metal ions are due to their effect on luciferase that surrounds oxyluciferin during its radioactive decay. We also found that having more metal ions accelerated bioluminescence reactions. The sensitivity of the reaction rate had no correlation with those of the quantum yield and spectrum.     

Syntheses and crystal structures of transition metal complexes of 1,1′-bisacetylacetoferrocene

Bimetallic complexes 3a–e of 1,1′-bisacetylacetoferrocene (2) were prepared by reactions of transition metal acetates M(OAc)₂ (M?=?Co²⁺, Mn²⁺, Cu²⁺, Ni²⁺, Zn²⁺) with the 2 in refluxing methanol. The X-ray structures of the cobalt and manganese complexes were determined showing very similar centrosymmetric macrocyclic dimeric frameworks constituted by linkage of two Co²⁺ or Mn²⁺ ions and two 1,1′-diacetoacetylferrocene units with two additional methanols as bridges dividing this macrocyclic framework into two small cyclic subunits. The UV-Vis spectra and electronic properties were also studied.     

Design and synthesis of a new fluorescent tripod for chemosensor applications

A new yellow-green fluorescent tripod based 1,8-naphthalimide has been synthesized and characterised. Its photophysical properties have been investigated in organic solvents of different polarity. The effect that the metal ions (Cd²⁺, Co²⁺, Zn²⁺, Mn²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Cu²⁺, Ba²⁺, Fe³⁺ and Ag⁺) produce upon the fluorescent intensity of acetonitrile solutions of the tripod has been discussed viewing its potential applications as a detector for metal cations. The influence of protons on the fluorescence intensity of the tripod in DMF and methanol–water (1:4 v/v) solutions has also been investigated.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Chemosensing hybrid materials: Chalcones‐functionalized cage‐like mesoporous SBA‐16 material for highly selective detection of toxic metal ions

Highly selective and low‐cost optical nanosensors of organic–inorganic hybrid materials for heavy metal ions detection have been prepared via the functionalization of mesoporous silica (SBA‐16) with chalcone fluorescent chromophores. The successful attachment of organic chalcone moieties and preservation of original structure of SBA‐16 after the anchoring process were confirmed by extensive characterizations using various techniques like Fourier transform infrared and UV–visible spectroscopies, transmission electron microscopy, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analysis. The colorimetric behaviour, selectivity and sensitivity were also investigated. The optical nanosensors respond selectively to heavy metal ions, such as Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, with observable colour changes in 0.01 M Tris–HCl aqueous buffer solution. Also, the optical sensing ability of the investigated nanosensors to the mentioned metal ions was investigated using steady‐state absorption and emission techniques. Significant increase in the absorption spectra and a static quenching in the emission spectra are observed upon adding various concentrations of the studied metal ions. The spectral changes as well as the observable colour changes suggest that the investigated nanosensors are suitable for simple, economic, online analysis and remote design of these toxic metal ions with fast kinetic responses. Finally, the low detection limits for all the studied metals are in good agreement with those recommended by both the US Environmental Protection Agency and World Health Organization, except for Hg²⁺ and Cd²⁺, indicating that the investigated nanosensors have hypersensitivity, selectivity and better recognition for all the studied metal ions.