Determination of malotilate and its metabolites in plasma and urine

A method for the determination of malotilate (I), the corresponding monocarboxylic acid (II) and its decarboxylated product (III) in plasma is described. Plasma was extracted with chloroform spiked with internal standard. The residue, dissolved in methanol, was chromatographed on a reversed-phase column with a mobile phase of 60% acetonitrile and 1% acetic acid in water. The sensitivity limit for I, II and III was 50, 25 and 100 ng/ml of plasma, respectively. Compound I in the same plasma extract was also analysed by gas chromatography--electron-impact mass spectrometry. The base peaks m/z 160 for I and m/z 162 for internal standard (IV) were monitored; the sensitivity limit for I was 2.5 ng/ml of plasma. The determination of the metabolites of I, II and its conjugate (V), and isopropyl-hydrogen malonate (VI) in urine by high-performance liquid chromatography is also described. The limit of quantification for VI was 2.0 micrograms/ml, and the overall coefficient of variation of VI was 4.7%. The limit of quantification for II in urine was 0.5 micrograms/ml and that for V was 1.0 micrograms/ml as total II (II + V). The overall precision of the method was satisfactory. The method was used to determine plasma and urine concentrations in four dogs orally dosed with 100, 200 or 400 mg of malotilate.     

Ultrasound-assisted extraction and determination of tartaric and malic acids from grapes and winemaking by-products

The optimization of an ultrasound-assisted extraction (UAE) method for tartaric and malic acids from grape derived samples is shown. A fractional factorial experimental design allowed for the determination of the effects of seven extraction variables. Relationships between all the variables were examined. By applying graphical analysis, the best extractions conditions were obtained. The most important variables were the extracting liquid and the extraction temperature. Later, a central composite design was applied for optimizing the temperature and the composition of the extracting liquid. The optimized method was applied to grapes and to winemaking by-products. The repeatability of the method was studied and the recovery of tartaric and malic acids was established. Organic acids quantification was done by liquid chromatography (LC) using a post-column buffer and a conductivity detector.     

Extraction and flame spectrophotometric determination of palladium and rhodium

Solvent extraction methods involving toluene, chloroform, 4-methyl-2-pentanone and pentyl acetate were studied for palladium and rhodium chelates. The palladiurn-salicylaldoxime chelate was extracted quantitatively into 4-methyl-2-pentanone at pH 3. The rhodium-diethyldithiocarbamate chelate was completely extracted into 4-methyl-2-pentanone at pH 8. The optimum combustion conditions for each of the organic extracts were then studied. The position of maximum emission intensity in the flame mantle was determined for each chelate and solvent system ; readings were taken at 363.5 mμ for palladium, and 369.2 mμ for rhodium. For palla-dium, when 4-methyl-2-pentanone was used instead of water as solvent, the emission intensity increased 21-fold. For rhodium, this kctone increased the sensitivity 27 times compared with water. A method is suggested for the separation and determination of palladium and rhodium in the same sample.     

固相萃取富集-高效液相色谱分离和测定邻甲苯胺和邻硝基甲苯

建立了以固相萃取技术进行富集 ,高效液相色谱进行分离和检测邻甲苯胺和邻硝基甲苯的方法。污染水中的邻甲苯胺和邻硝基甲苯采用Sep pakC1 8萃取柱进行固相萃取。色谱分离条件是 :Shim PackCLCODS(1 5 0mm× 4 .6mmid ,5 μm)柱为分析柱 ,甲醇 水 =60∶4 0 (V V)为流动相 ,流速为 1 .0mL min,邻甲苯胺和邻硝基甲苯的紫外检测波长分别为 2 3 0nm和 2 5 4nm ,本法具有良好的灵敏度和重现性。     

Quantification of Tricyclic and Nontricyclic Antidepressants in Spiked Plasma and Urine Samples Using Microextraction in Packed Syringe and Analysis by LC and GC-MS

In this paper, a highly selective Sudan IV molecularly imprinted polymer was synthesized by surface molecular imprinting technique in combination with a sol?Cgel process using ??-aminopropyl triethoxysilane as functional monomer, tetraethoxysilane as cross-linker and activated silica gel as support material. The imprinted polymer was characterized by FT-IR spectra, scanning electron micrograph and adsorption experiments and it was exhibited good recognition and selective ability, offered a faster rate for the adsorption of Sudan IV. Using the imprinted material as sorbent, a solid-phase extraction coupled with high-performance liquid chromatography method for determination of trace Sudan IV was presented. The detection limit (S/N = 3) was 25.2 ng L^?1, and the RSD for five replicate was 2.86%. With a loading flow rate of 2.5 mL min^?1 for loading 30 mL, an enrichment factor of 104 was achieved. This method was applied for extraction and determination of chilli powder and duck egg samples with good recoveries ranging from 85.3 to 98.1%.     

Separation and determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation by capillary zone electrophoresis

A capillary zone electrophoresis method was developed for the separation and determination of strychnine and brucine in Strychnos nux-vomica L. and its preparation. The factors that could affect the separation were studied, such as the types and concentrations of electrolytes, pH, ionic strength and organic modifier. The optimum running buffer was 20 mmol/L of ammonium acetate containing 0.2 mol/L of glacial acetic acid (pH 3.64). The applied voltage was 25 kV and the wavelength of the UV detector was set at 214 nm. The established method with dopamine hydrochloride as internal standard was linear in the range of 5-100 microg/mL for both strychnine and brucine. The recovery was 102.96% for strychnine and 98.56% for brucine. The extracts of Strychnos nux-vomica and its preparation could be directly injected for analysis.     

Determination of type A and type B trichothecenes in paprika and chili pepper using LC-triple quadrupole-MS and GC-ECD

There is a need to develop sensitive and accurate analytical methods for determining deoxynivalenol (DON), HT-2 toxin and T-2 toxin in paprika to properly assess the relevant risk of human exposure. An optimized analytical method for determination of HT-2 toxin and T-2 toxin using capillary gas chromatography with electron capture detection and another method for determination of DON by liquid chromatography-mass spectrometry in paprika was developed. The method for determination of HT-2 toxin and T-2 toxin that gave the best recoveries involved extraction of the sample with acetonitrile-water (84:16, v/v), clean-up by solid-phase extraction on a cartridge made of different sorbent materials followed by a further clean-up in immunoaffinity column that was specific for the two toxins. The solvent was changed and the eluate was derivatized with pentafluoropropionic anhydride and injected into the GC system. The limits of detection (LOD) for T-2 and HT-2 toxins were 7 and 3 μg/kg, respectively, and the recovery rates for paprika spiked with 1000 μg toxin/kg were 71.1% and 80.1% for HT-2 and T-2 toxins, respectively. For DON determination, the optimized method consisted of extraction with acetonitrile-water (84:16, v/v) solution followed by a solid-phase extraction clean-up process in a cartridge made of different sorbent compounds. After solvent evaporation in N₂ stream, the residue was dissolved and DON was separated and determined by LC-MS/MS. The LOD for this method was 14 μg DON/kg paprika sample and the DON recovery rate was 86.8%.     

Rapid and Highly Sensitive HPLC and TLC Methods for Quantitation of Amlodipine Besilate and Valsartan in Bulk Powder and in Pharmaceutical Dosage Forms and in Human Plasma

Two simple, sensitive, and specific high-performance liquid chromatography and thin-layer chromatography methods were developed for the simultaneous estimation of Amlodipine besilate (AM) and Valsartan (VL). Separation by HPLC was achieved using a xTerra C18 column and methanol /acetonitrile /water/ 0.05% triethylamine in a ratio 40:20:30:10 by volume as mobile phase, pH was adjusted to 3 ± 0.1 with o-phosphoric acid. The flow rate was 1.2 mL min^?1. The linearity range was 0.2 to 2 µg mL^?1 for amlodipine besilate and 0.4 to 4 µg mL^?1 for Valsartan with a mean percentage recovery of 99.59 ± 0.523% and 100.61 ± 0.400% for amlodipine besilate and valsartan, respectively. The TLC method used silica gel 60 F₂₅₄ plates; the optimized mobile phase was ethyl acetate/ methanol / ammonium hydroxide (55:45:5 by volume). Quantitatively, the spots were scanned densitometrically at 237 nm. The range was 0.5–4.0 µg spot^?1 for amlodipine besilate and 2.0–12.0 µg spot^?1 for valsartan. The mean percentages recovery was 99.80 ± 0.451% and 100.61 ± 0.363% for amlodipine besilate and valsartan, respectively. The HPLC method was found to be simple, selective, precise, and reproducible for the estimation of both drugs from spiked human plasma.     

In-line coupling SPE and CE for DNA preconcentration and separation

An in-line SPE method coupled to CE was developed for the analysis of DNA. The amino silica monolith was prepared in situ by polymerization of tetraethoxysilane and N-(β-aminoethyl)-γ-aminopropyltriethoxysilane in ethanol aqueous solution at the inlet end of a 100?μm id fused-silica capillary, and the remaining part of the capillary was used as separation channel. The procedure for this in-line SPE-CE method was constructed on the basis of investigation on operational conditions such as the introduction mode of sieving matrix, the composition of elution solvent and the elution time. Twenty millimolar ammonium hydroxide was demonstrated to be effective for DNA desorption from the monolith, and linear poly(N-isopropylacrylamide) was used as the separation matrix. The proposed method could achieve limits of detection of 0.065-0.123?ng/mL for six DNA fragments ranging 100-2000?bp. Compared with conventional CE, preconcentration factors of over 100 times were obtained. The applicability of the in-line SPE-CE method was further demonstrated by analyzing plasmid DNA from Escherichia coli crude lysate.     

一种形状可控的高韧性碳纤维微电极的制备、表征及其在细胞分泌检测中的应用

本文报道利用微量移液枪头制备碳纤维微电极。扫描电镜结果表明：该法不仅可得到密封效果良好、截面光滑的微盘或微柱电极,而且电极的高韧性的特点能够保证其在使用过程中不易被折断。电极的伏安响应及单细胞测定实验进一步表明,该电极电化学性能优良,噪声低、响应快速、灵敏度高,能满足单细胞检测及其它微环境分析的要求。     

Electron beam modification and crosslinking: Influence of nitrile and carboxyl contents and level of unsaturation on structure and properties of nitrile rubber

The structural changes of nitrile rubber with varying nitrile contents, hydrogenated nitrile rubber and carboxylated nitrile rubber in the presence and absence of a polyfunctional monomer, namely trimethylolpropane triacrylate, at different doses of electron beam irradiation, were investigated with the help of FTIR spectroscopy (in the attenuated total reflectance mode), dynamic mechanical thermal analysis and sol–gel analysis. Solid-state NMR with gated high power decoupling technique was used to understand the mechanism of crosslinking of the irradiated samples. The allylic radicals generated in the butadiene chains react to form intermolecular crosslinkages. There was a significant decrease in the concentration of olefinic groups for the nitrile rubber on irradiation. This was also affirmed by the increase in the carbon resonances due to C–C linkages from the NMR technique, indicating more crosslinkages. The spectroscopic crosslink densities were determined and the results were compared with the swelling measurements. The variation in the crosslink clustering for rubbers with different acrylonitrile contents was explained using the NMR technique. The increase in crosslinking was also revealed by the increase in the percent gel content and dynamic storage moduli with radiation doses. The lifetime of spurs formed and the critical dose, an important criterion for overlapping of spurs, were determined for both the grafted and the ungrafted nitrile rubbers of different grades and compared using a mathematical model. The ratio of scissioning to crosslinking for nitrile rubber was determined using Charlesby–Pinner equation. The mechanical properties had also been studied for both the modified and the unmodified systems.     

Core-shell nanorods of SnS-C and SnSe-C: synthesis and characterization

The straightforward, efficient, solventless, RAPET (reactions under autogenic pressure at elevated temperature) approach was explored for the fabrication of core-shell nanomaterials. Carbon-encapsulated SnS and SnSe nanorods were synthesized by a one-step thermal decomposition of tetramethyltin in the presence of either S or Se powder in a closed reactor at 700 degrees C for 40 min, under their autogenic pressure in an inert atmosphere. The powder X-ray diffraction measurements provided structural evidence for the formation of pure orthorhombic phases of SnS or SnSe particles. The Raman spectroscopy measurements ensured that the nature of the coated carbon was semigraphitic. The scanning electron micrographs verified the 1D morphology of the formed SnS and SnSe chalcogenides, and their stoichiometry was confirmed by EDAX measurements. The HR-TEM micrographs distinguished between core and shell morphologies. The nitrogen gas adsorption on the surface of core-shell nanostructures was determined by BET surface area analysis. The plausible mechanism for the creation of chalcogenide cores (SnS or SnSe) with a carbon shell was elucidated.     

Extrudate snacks from rice flour and oyster mushroom powder: Physico-chemical and functional properties characterization and storability evaluation

Ready-to-eat extrudate was prepared from the blend of rice flour and oyster mushroom powder. Process parameters for development of snack were screw speed of 250–350 ​rev/min, feed moisture content of 15–25% (d.b.) and the percentage of oyster mushroom powder in rice flour was maintained in the range of 5–15%. Response surface methodology with the central composite rotatable design was used for the study. The effects of process parameters on the physico-chemical and functional properties were analyzed. It was observed that the screw speed of 330 ​rev/min, feed moisture content of 20% and the percentage of mushroom powder in rice flour of 6.6% gave the most acceptable quality product. The storability of the developed product was checked in three packaging materials, viz. polypropylene (PP), low density polyethylene (LDPE), and metalized propylene (MPP) pouches for three months and it was recommended to store the rice flour-mushroom extruded snack in MPP pouches for better retention of quality. The contemporary work on extrudate snacks from the blend of rice flour and oyster mushroom powder is a good piece of work quite useful for industry dealing with ready-to-eat extrudate products.     

Characterization and performance of immobilized amylase and cellulase

The performance of cellulase and amylase immobilized on siliceous supports was investigated. Enzyme uptake onto the support depended on the enzyme source and immobilization conditions. For amylase, the uptake ranged between 20 and 60%, and for cellulase, 7–10%. Immobilized amylase performance was assessed by batch kinetics in 100–300 g/L of corn flour at 65°C. Depending on the substrate and enzyme loading, between 40 and 60% starch conversion was obtained. Immobilized amylase was more stable than soluble amylase. Enzyme samples were preincubated in a water bath at various temperatures, then tested for activity. At 105°C, soluble amylase lost ∼55% of its activity, compared with ∼30% loss for immobilized amylase. The performance of immobilized cellulase was evaluated from batch kinetics in 10 g/L of substrate (shredded wastepaper) at 55°C. Significant hydrolysis of the wastepaper was also observed, indicating that immobilization does not preclude access to and hydrolysis of insoluble cellulose.     

Macro- and micro-volumetric determination of anthranilic acid and its application in inorganic quantitative macro- and micro-analysis

The authors performed a critical study of the macro-volumetric method for the determination of anthranilic acid by di- and tri-brommation. Preference was given to the tribromination method, as it was found to be more precise.On the basis of this critical study, the authors have elaborated an exact microvolumetric method by tribromination.This method was applied in inorganic quantitative microanalysis for the determination of cobalt, zinc and cadmium.     

Achiral and chiral determination of tramadol and its metabolites in urine by capillary electrophoresis

An achiral and chiral separation for the determination of tramadol and its main metabolite O-demethyltramadol in urine samples by CE with UV detection was developed. It was possible to separate tramadol and its phase I and phase II metabolites in one single run using a borate buffer. Furthermore, the simultaneous chiral separation of tramadol and the phase I metabolites was achieved using carboxymethyl-beta-cyclodextrin as chiral selector. To reach the required limits of quantification for the analytes, a preconcentration by solid-phase extraction for the achiral assay and by liquid-liquid extraction for the chiral assay was used. The methods were validated and their applicability was shown by the determination of tramadol and O-demethyltramadol in urine samples.     

Determination of flavonoids and stilbenes in red wine and related biological products by HPLC and HPLC-ESI-MS-MS

To investigate probable health benefits of flavonoids and stilbenes in red wine a new reversed-phase (RP) high-performance liquid-chromatographic (HPLC) method with enhanced separation efficiency and improved selectivity, sensitivity, and speed has been established for determination of the flavonoids quercetin, myricetin and kaempferol and the stilbenes cis- and trans-resveratrol, in a single run . UV-absorbance, fluorescence (FLD), and mass-spectrometric (MS) detection were also evaluated. UV-absorbance detection at 320 nm for stilbenes and 377 nm for flavonoids enables their determination up to the nanogram range with a linearity of R2>0.9999 (linear range 50 ng mL(-1)-50 microg mL(-1)). Calculated values of average recoveries were between 95 and 105% for all analytes. For resveratrol, fluorescence detection was highly selective and twice as sensitive as UV detection, and linearity was satisfactory (R2>0.9996; linear range see UV detection). For the detection of the hydrophilic glycosidic compounds piceid and rutin, which are coeluted with other hydrophilic ingredients, the validated RP HPLC system was coupled to a quadrupole ion-trap mass-spectrometer (MS) via an electrospray interface (ESI) with 25% ammonia solution as sheath liquid. MS detection was, highly linear (R2>0.9878; linear range 50 ng mL(-1)-50 microg mL(-1)) for all investigated analytes and the limits of detection were in the low nanogram range. Compared with UV detection MS detection resulted in a 200% increase in signal intensity for myricetin and 400% increases for quercetin and kaempferol, but equal signal intensity for resveratrol. Calculated values of average recoveries were 102% for myricetin and 79% for piceid. Collision induced dissociation (CID) was also used to obtain characteristic fragmentation fingerprints to facilitate qualitative and quantitative analysis even in complex matrices. Finally, this hyphenated HPLC-ESI-MS method was highly suitable and an essential improvement compared with UV- and fluorescence detection.     

Feasibility of Separation and Quantification of Inorganic Arsenic Species Using Ion-Exchange Membranes and Laser-Induced Breakdown Spectroscopy

Analytical methods for the determination of inorganic arsenic species have attracted much attention due to the high toxicity of these compounds and related legislative regulations for food. A new method for the separation and quantitation of As(III) and As(V) was developed using ion-exchange membranes and laser-induced breakdown spectroscopy (LIBS). Using the anion-exchange polymer membrane, As(V) was selectively collected on the membrane, and As(III) was filtered through the membrane. The separated As(V) on the membrane was directly determined by LIBS. The As(III) in the filtrate was subsequently oxidized to As(V) and collected by the membrane for LIBS analysis. The detection limit for As(V) was estimated to be 10?mg/kg. The recovery efficiencies for the arsenic species as standards were in the range of 97–99%. This method was applied for the analysis As-spiked water certified reference materials, and the results showed that the recovery for As(V) was 98.9%. This new speciation method is cost-effective, simple, and low labor-intensive for the quantitation of inorganic arsenic.     

LC-MS-MS to detect and identify four beta-agonists and quantify clenbuterol in liver.

European legislation forbids the use of beta-agonists as growth-promoting substances in cattle raised for human consumption. However, the use of beta-agonists is allowed as a therapeutic treatment of tocolysis for female cattle during calving and of respiratory diseases and tocolysis for horses not raised for human consumption. A maximum residue limit (MRL) of 0.5 microgram kg-1 for clenbuterol in the liver of cattle and horses is proposed by law. Residues of beta-agonists in liver are identified with LC-MS-MS. Using ion trap technology, it was possible to identify each analyte without the need to resolve completely the chromatographic peaks. For each analyte, specific fragment ion spectra were obtained. The coeluting or incompletely resolved peaks were separated mass spectrometrically. For tulobuterol, bromobuterol and mabuterol, qualitative information was obtained. All beta-agonists could be detected up to a concentration of 0.1 microgram kg-1. For clenbuterol, a limited quantitative validation was performed. A working range was defined for which the method was applicable. Quantification was based on the integration of the response of the analytes in spiked blank liver samples. The mean recovery was 15%. The relative standard deviation (RSD) values at different concentrations were below the maximum allowed RSD. The limit of detection of clenbuterol was 0.11 microgram kg-1. The limit of quantification was 0.21 microgram kg-1. It was possible to quantify clenbuterol below one-half of the MRL. The advantage of this method is the ease of use of the mass spectrometric separation to qualify and quantify the presence of four beta-agonists in liver.     

烟用香精香料的固相微萃取-气相色谱指纹图谱及系统聚类分析

建立了1115烟用香精香料的气相色谱指纹图谱。选择65μm的PDMS/DVB作为萃取头的涂层,萃取温度及萃取时间分别为70℃和45min。用TEKNOKROMA TBR-5石英毛细管柱分离,氢火焰离子化检测器检测。应用所提出的方法分析了9个不同批次的1115烟用香精香料样品,结合系统聚类分析法区分了不同批次的样品指纹图谱,并通过掺兑试验进一步验证了方法用于烟用香精质量控制的可行性。