Rapid spectrophotometric determination of zirconium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

Zirconium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.8-5.8 to form a red chelate that is soluble in methanol-water mixtures. The absorbance of the 1:3 complex obeys Beer's law over the zirconium concentration range 0.02-0.44 mug/ml and has a molar absorptivity of 1.54 x 10(5) 1.mole(-1). cm(-1) at 585 nm. The formation constant is log beta(3) = 16.15. Of 59 species studied, only EDTA, Ga, In, Ti, Hf and V(V) interfere seriously.     

Sensitive spectrophotometric determination of bismuth(III) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The complex of the reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) with Bi(III) has been studied. The composition and stability of this complex have been determined. An analytical method for the spectrophotometric determination of Bi(III) using its complex with 5-Br-PADAP has been developed. Variables influencing the method such as pH, wavelength, and time have been studied. The limitations of this method and the effect of interfering ions have been investigated. Comparison of this method with other methods cited in the literature for the determination of Bi(III) is also included.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Spectrophotometric Determination of Mercury Using 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol

Abstract

Mercuric ion with 5-Br-PADAP forms a 1:2 complex at pH 8.0–10, which, with the addition of Triton X-100, has a molar absorptivity of 1.10 × 10⁵ at 565 nm. A method is described for the determination of mercury in industrial waste water and sludge.     

Silaned glass beads for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol

Silaned glass beads are applied for the preconcentration and spectrophotometric determination of cobalt with 2-(2-pyridylazo)-5-diethylaminophenol (PADAP). Traces of cobalt are collected as the coloured PADAP complex on a column of the beads, and the complex is then eluted with a small volume of ethanol-hydrochloric acid mixture and the absorbance of the eluate is measured at 575 nm. The cobalt can easily be concentrated by a factor of 50-500 in this way, and 0.1-2 mug of cobalt in 100 ml of sample solution can be determined reproducibly. High concentrations of Fe(III), Cr(III), Pb, Zn, Cu(II), Mn(II), Cd, Al, Ca and Mg can be tolerated but Pd(II) interferes.     

2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol as a reagent for the spectrophotometric determination of La(III), Y(III), and Ce(III)

The complexes of the reagent 5-Br-PADAP with the metal ions La(III), Ce(III), and Y(III) have been studied.The composition and stability of these complexes have been determined. A sensitive spectrophotometric procedure for the determination of the metal ions La(III), Ce(III), and Y(III) has been proposed. The limitations of this procedure and the effect of other ions have been studied.     

A study of the direct spectrophotometric determination of uranium(VI) in trialkylamine extracts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A straightforward spectrophotometric method is described for the determination of uranium(VI) in trialkylamine sulphate extracts in kerosene diluent; 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) is used for colour formation without resort to backextraction into an aqueous phase. The method provides good tolerance to sulphate ion and rapid colour development and appears to be free from interference when applied to extracts from uranium sulphate leach liquors.     

Spectrophotometric determination of gadolinium(III) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP)

Reaction between gadolinium(III) and 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5- Br-PADAP) was studied for delineating optimal conditions for complexation. This reagent can be used for the spectrophotometric determination of Gd(III) in concentrations ranging from 0.04 to 1.2 ppm (a = 1.76(+/- 0.03) x 10(5) (1.(-1) mole(-1). cm). The reaction takes place at a pH between 9.2 and 11.6. In the presence of Triton X-100 this complex is soluble in water. In order to overcome difficulties caused by the presence of other lanthanides, an ion exchange chromatographic technique was used.     

Spectrophotometric determination of cadmium(II) using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

The complex of cadmium with the reagent 2-(-5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been studied. The composition, stability constant, and free energy change of formation of the complex have been determined. A sensitive spectrophotometric method for the determination of cadmium has been developed and applied for a range of concentration of 0.4–4.0 μg/ml cadmium using the complex Cd-5-Br-PADAP. The optimum conditions for maximum sensitivity of determination such as standing time, pH, wavelength, and order of addition have been determined. The effect of foreign ions on this method has been also studied.     

Sensitive spectrophotometric determination of ascorbic acid in fruit juices and pharmaceutical formulations using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP)

A simple and very sensitive method has been developed for the determination of ascorbic acid based on the oxidation of ascorbic acid to dehydroascorbic acid by iron(III), followed by a complexation of iron(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol(Br-PADAP). The iron(II) complex is formed immediately, with absorption maxima at 560 and 748 nm and a molar absorptivity of 1.31 × 10⁵ l mole^–1cm^–1 and 5.69 × 10⁴ l mole^–1cm^–1, respectively. The ascorbic acid determination is possible with a linear range up to 2.4 μg ml^–1, a calibration sensitivity of 0.744 ml μg^–1 at 560 nm and 0.323 ml μg^–1 at 748 nm, and a detection limit of 15 ng ml^–1 and 44 ng ml^–1, respectively. The procedure was used for the ascorbic acid determination in several fruit juices and pharmaceutical formulations. The results demonstrated a good precision (R.S.D. < 1%) and are in agreement with those obtained with others methods. The Br-PADAP method proposed is six times more sensitive than the method using the iron(II)-1,10-phenanthroline system. Received: 7 May 1996 / Revised: 1 July 1996 / Accepted: 8 August 1996     

Sensitive spectrophotometric determination of ascorbic acid in fruit juices and pharmaceutical formulations using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP)

A simple and very sensitive method has been developed for the determination of ascorbic acid based on the oxidation of ascorbic acid to dehydroascorbic acid by iron(III), followed by a complexation of iron(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol(Br-PADAP). The iron(II) complex is formed immediately, with absorption maxima at 560 and 748 nm and a molar absorptivity of 1.31 × 10⁵ l mole^–1cm^–1 and 5.69 × 10⁴ l mole^–1cm^–1, respectively. The ascorbic acid determination is possible with a linear range up to 2.4 μg ml^–1, a calibration sensitivity of 0.744 ml μg^–1 at 560 nm and 0.323 ml μg^–1 at 748 nm, and a detection limit of 15 ng ml^–1 and 44 ng ml^–1, respectively. The procedure was used for the ascorbic acid determination in several fruit juices and pharmaceutical formulations. The results demonstrated a good precision (R.S.D. < 1%) and are in agreement with those obtained with others methods. The Br-PADAP method proposed is six times more sensitive than the method using the iron(II)-1,10-phenanthroline system. Received: 7 May 1996 / Revised: 1 July 1996 / Accepted: 8 August 1996     

Second derivative spectrophotometric method for simultaneous determination of cobalt, nickel and iron using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, sensitive and rapid derivative spectrophotometric method using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been developed for simultaneous determination of Co(II), Ni(II) and Fe(II) which have very similar chemical behavior and appear together in many real samples. The complexes of all these metal ions with 5-Br-PADAP were formed immediately at pH 7.0 ammonium acetate buffered solution and were stable for at least 24 h. Second derivative spectra were selected for evaluation, because working wavelength determination was more precise and spectral overlap was less than in the ordinary and first derivative spectra. Three wavelengths at which the complexes exhibit extremum ²D values for Co(II), Ni(II) and Fe(II) were selected as analytical wavelengths, i.e., 640, 600 and 740 nm, respectively. Calibration curves drawn with zero-to-peak values at mentioned wavelengths were linear between 80 and 2000 ng ml⁻¹ for each metal ion. Concentrations of Co(II) and Ni(II) were calculated from the total ²D values and the sum of the linear equations for these three cations at 640 and 600 nm, after Fe(II) assay by making use of the ²D value at 740 nm. Limits of detection (LOD) for Co(II), Ni(II) and Fe(II) were 2.7, 13.9 and 3.0 ng ml⁻¹, respectively. The method has been applied to tool steel and heater resistance wire samples successfully.     

Simultaneous derivative spectrophotometric determination of zinc and cadmium with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the presence of cetylpyridinium chloride.

A selective and sensitive derivative photometric method has been developed for the determination of trace amounts of Zn2+ with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant. The molar-absorption coefficient and analytical sensitivity of the 1:2 complex at 554 nm are 1.19 x 10(5) L mol(-1) cm(-1) and 0.56 ng mL(-1), respectively. The detection limit is 1.96 x 10(-2) ng mL(-1) and Beer's law is valid in the 0.02-0.66 microg mL(-1) range of Zn2+. The developed derivative procedure, using the zero-crossing measurement approach, is applied for the rapid and selective simultaneous determination of Zn2+ and Cd2+ in the range of 0.06-0.66 and 0.20-1.60 microg mL(-1), respectively. Complex matrices, including reference materials, environmental and biological samples and synthetic mixtures, have been successfully analyzed for trace amounts of the two metal ions.     

2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚与铅(Ⅱ)、锌(Ⅱ)络合平衡的双系列线性回归法研究

本文用双系列线性回归法研究了Pb(Ⅱ)、Zn(Ⅱ)与5-Br-PADAP的络合反应,发现在pH5～6.5,30％乙醇溶液中,Pb(Ⅱ)与5-Br-PADAP形成1:1络合物,Zn(Ⅱ)主要形成1:2络合物,两种络合物的稳定常数(lgβ)分别为11.17、22.31,最大吸收波长分别为575、550nm,摩尔吸光系数分别为6.01×10~4、1.34×10~5L·mol~(-1)·cm~(-1)。     

Spectrophotometric determination of uranium(VI) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in a flow-injection system

The direct determination of uranium(VI) by a flow-injection procedure is based on spectrophotometric measurement with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the present of fluoride. The interfering effects of many commonly occuring elements were studied. The calibration curve was linear over the range 0.5–20 mg 1^?1 uranium(VI). The relative standard deviation obtained on a leach liquor containing 10 mg 1^?1 uranium(VI) was 1.9%. The procedure is rapid and convenient, and up to 40 samples can be analysed per hour.     

Sensitive spectrophotometric determination of vanadium with 2-(5-bromo-2-pyridylazo)-5-diethyl-aminophenol (5-Br-PADAP)

A new sensitive and highly selective method is described for the spectrophotometric determination of microgram amounts of vanadium(V). First, vanadium is isolated by extraction withN-benzoyl-N-phenylhydroxylamine (BPHA) in chloroform from about 4M hydrochloric acid medium. Then, chloroform is evaporated and the residue mineralized with mixture of cone. perchloric and nitric acid. Finally, a colour reaction of vanadium(V) separated with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in an acetate buffer (pH 4.5) gives a molar absorptivity of 5.48×10⁴l·mol^–1·cm^–1 at 585 nm. The proposed method was applied for the determination of traces of vanadium in aluminium samples. The results obtained show a good precision and accuracy of the method.     

Rapid spectrophotometric determination of thorium(IV) with 1-(2′-thiazolylazo)-2-naphthol

Thorium(IV) reacts with 1-(2-thiazolylazo)-2-naphthol (TAN) in the presence of antipyrine to form a sparingly soluble red-coloured chelate, soluble in 36% methanol (v/v). Complexation takes place instantaneously at pH 2.4–2.8, maintained by glycine buffer. Antipyrine is found to enhance sensitivity of the complex, which is stable for 19 hours. The 12 complex exhibits maximum absorbance at 555 nm, obyes Beer's law in the concentration range from 0.32 to 6.56 g of thorium(IV) per ml, has a molar absorptivity of 3.14·10⁴ dm³/mol^–1·cm^–1 and a Sandel sensitivity of 7.4 ng·cm^–2. The formation constant (log K) is found to be 8.62 and 8.45. Interference of 57 anions and cations in the determination of thorium(IV) has been studied. From ten repeated determinations, the coefficient of variation was found to be ±0.98%. The method was successfully applied for determination of thorium content in a sample of monazite.