Boron-doped carbon nanotubes serving as a novel chemical sensor for formaldehyde

To search for a novel sensor to detect the presence of formaldehyde (HCOH), we investigate reactivities of the intrinsic and boron-doped (B-doped) single-walled (8, 0) carbon nanotube (SWCNT) with HCOH using density functional theory calculations. Compared with the intrinsic SWCNT, the B-doped SWCNT presents high sensitivity to HCOH. This is attributed to the strongly chemical interaction between the electron-rich oxygen atom of HCOH and the electron-scarce boron atom of the doped SWCNT. B-doped SWCNTs are expected to be a potential candidate for detecting the presence of HCOH.     

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode

Doped carbon nanotubes are now extremely attractive and important nanomaterials in bioanalytical applications due to their unique physicochemical properties. In this paper, the boron-doped carbon nanotubes (BCNTs) were used in amperometric biosensors. It has been found that the electrocatalytic activity of the BCNTs modified glassy carbon (GC) electrode toward the oxidation of hydrogen peroxide is much higher than that of the un-doped CNTs modified electrode due to the large amount of edge sites and oxygen-rich groups located at the defective sites induced by boron doping. Glucose oxidase (GOD) was selected as the model enzyme and immobilized on the BCNTs modified glassy carbon electrode by entrapping GOD into poly(o-aminophenol) film. The performance of the sensor was investigated by electrochemical methods. At an optimum potential of +0.60 V and pH 7.0, the biosensor exhibits good characteristics, such as high sensitivity (171.2 nA mM(-1)), low detection limit (3.6 microM), short response time (within 6s), satisfactory anti-interference ability and good stability. The apparent Michaelis-Menten constant (K(m)(app)) is 15.19 mM. The applicability to the whole blood analysis of the enzyme electrode was also evaluated.     

Electrochemical sensor for Baicalein using a carbon paste electrode doped with carbon nanotubes

We report on the voltammetric determination of the flavonoid Baicalein by using a carbon paste electrode that was doped with multi-walled carbon nanotubes. The resulting sensor exhibits excellent redox activity towards Baicalein due to the large surface area and good conductivity of the electrode. Cyclic voltammetry at various scan rates was used to investigate the redox properties of Baicalein. At the optimum conditions, the sensor displays a linear current response to Baicalein in the 0.02–10 μM concentration range, with a limit of detection of 4.2 n M. The method was successfully applied to the determination of Baicalein in spiked human blood serum samples and in a Chinese oral liquid.

A novel sensor based on multi-walled carbon nanotubes and boron-doped double-layer molecularly imprinted membrane for the analysis of SCZ in pharmaceutical and biological samples

ABSTRACT

A molecularly imprinted electrochemical sensor for the rapid detection of the anti-parasitic drug Secnidazole (SCZ) is reported. In this work, the build electrochemical sensor was based on a carbon paste electrode (CPE) modified with multi-wall carbon nanotubes (MWCNTs) and boron-embedded duplex molecularly imprinted composite membranes (B-DMICMs), that significantly increased the efficiency of the sensor for the detection of template molecule SCZ. Density functional theory (DFT) was employed to study the interactions between the template and monomers to select appropriate functional monomers for rational design of the B-DMICMs.The optimal experimental conditions were optimised for the factors affecting the performance of the sensor. Under the optimal conditions, the reduction peak currents of SCZ by differential pulse voltammetry increased linearly with SCZ concentration in the range from 3.0 × 10^?4 to 1.0 × 1.0^?6 mol L^?1 and 1.0 × 1.0^?6 to 1.91 × 10^?8 mol L^?1 with a detection limit of 1.72 × 10^?8 mol L^?1 for secnidazole, which is significantly lower than those in the currently used methods and in previous reports. This method offers low cost, sensitive and effective determination of SCZ and can potentially be used for detection of SCZ in pharmaceutical and biological samples with good precision and accuracy.     

The template synthesis of double coaxial carbon nanotubes with nitrogen-doped and boron-doped multiwalls

We present the first synthesis of double coaxial carbon nanotubes with nitrogen-doped and boron-doped multiwalls by the template technique with two-step chemical vapor deposition. X-ray photoelectron spectra confirm the coaxial formation of different-doped structures. The electrical conductance and oxygen chemisorption measurement indicate dual electrical properties and chemical activity at their outer and inner layers.     

Gas sensor array based on metal-decorated carbon nanotubes

Here we demonstrate design, fabrication, and testing of electronic sensor array based on single-walled carbon nanotubes (SWNTs). Multiple sensor elements consisting of isolated networks of SWNTs were integrated into Si chips by chemical vapor deposition (CVD) and photolithography processes. For chemical selectivity, SWNTs were decorated with metal nanoparticles. The differences in catalytic activity of 18 catalytic metals for detection of H(2), CH(4), CO, and H(2)S gases were observed. Furthermore, a sensor array was fabricated by site-selective electroplating of Pd, Pt, Rh, and Au metals on isolated SWNT networks located on a single chip. The resulting electronic sensor array, which was comprised of several functional SWNT network sensors, was exposed to a randomized series of toxic/combustible gases. Electronic responses of all sensor elements were recorded and the sensor array data was analyzed using pattern-recognition analysis tools. Applications of these small-size, low-power, electronic sensor arrays are in the detection and identification of toxic/combustible gases for personal safety and air pollution monitoring.     

Condition optimization of amperometric determination of chemical oxygen demand using boron-doped diamond sensor

The amperometric determination of chemical oxygen demand (COD) reported by Quan Xie??s group (Electrochem Commun 9:2281, 14), was a rapid, green and simple COD evaluation method. This work focused on testing and verifying this method by using a home-made boron-doped diamond (BDD) film as anode and optimizing the experiment conditions. The BDD thin film electrode was employed as anode and the electrochemical process was run with different experimental parameters including counter electrode, electrode gap, applied potential, electrolyte pH, and temperature. Standard samples were determined in the optimum conditions, a linear range of 19.2?C11,600?mg l^?1 COD and a low detection limit of 0.192?mg l^?1 COD were well established with the present approach. The COD value of the simulated organic wastewater determined by this method agreed well with the standard dichromate method, and it showed good accuracy, stability, and reproducibility.     

Amperometric determination of chemical oxygen demand using boron-doped diamond (BDD) sensor

A new application of boron-doped diamond (BDD) electrode was developed for detecting chemical oxygen demand (COD) by amperometric method. The effects of some basic experimental parameters including pH and applied potential on the response of the BDD electrode were investigated and the optimal operating conditions were obtained. In the COD tests of standard samples, a wide linear range of 20–9000 mg l⁻¹ COD and a low detection limit of 7.5 mg l⁻¹ COD were well established with the present approach. Additionally, the BDD sensor was successfully employed to determine the COD of real samples from various chemical or pharmaceutical wastewaters and the performance still kept stable after over 400 measurements. The results obtained indicated that, as compared with the conventional COD determination techniques, the proposed sensor was an environmentally friendly method with the advantages of short analysis period, simplicity, and no requirement of complicated sample pretreatment even for a sample containing relatively high concentration of organic pollutants.     

Electrochemical chlorine sensor with multi-walled carbon nanotubes as electrocatalysts

It has been reported for the first time that an electrochemical gas sensor modified with multi-walled carbon nanotubes (MWNTs) film as electrocatalyst was fabricated for the determination of chlorine (Cl₂).Here, MWNTs and graphite were compared with each other in terms of their electrochemical properties using cyclic voltammetry. Cl₂ gas was allowed through the cathode surface of the sensor and the resulting galvanic effects were monitored. Results indicated that both of the MWNTs and graphite have the electrocatalytic activity for the reduction of Cl₂ while the MWNTs-modified electrode exhibited a higher accessible surface area in electrochemical reactions, excellent sensitivity, stable response, reproducibility and recovery for the determination of Cl₂.     

Novel possibilities in the study of isolated carbon nanotubes

We report the first detection of carbon nanotubes in the gas phase in a matrix-assisted laser desorption/ionization (MALDI) mass spectrometric experiment. These observations open the possibility of studying isolated nanotubes in the gas phase by means of various spectroscopic methods and a possible way to separate them.     

Self-assembled monolayer-assisted chemical transfer of in situ functionalized carbon nanotubes

A low-temperature flexible process, named "chemical transfer", was developed to assemble well-aligned carbon nanotube (ACNT) structures onto various substrates. The technology was featured by (1) in situ functionalization of ACNTs with reactive functional groups during the CVD process and (2) covalently bonded interface with a self-assembled monolayer (SAM) of conjugated thiol molecules as the bridging ligand and conduction path at the ACNT/gold interface. The effectiveness of the in situ functionalization was characterized by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). I-V response and the interfacial strength of the chemically transferred structure were studied. Results showed an Ohmic contact, low electrical resistivity, and improved CNT-substrate adhesion. This novel technique shows promising applications for positioning ACNTs as electrical interconnects or thermal interface materials on temperature-sensitive substrates.     

Green chemical functionalization of single-walled carbon nanotubes in ionic liquids

Single walled carbon nanotubes (SWNTs) are exfoliated and functionalized predominantly as individuals by grinding them for minutes at room temperature with aryldiazonium salts in the presence of ionic liquids (ILs) and K(2)CO(3). This constitutes an extremely rapid and mild green chemical functionalization process for obtaining the individualized nanotube structures. A number of ILs and various reaction conditions were surveyed. Raman, XPS, UV/vis/NIR spectroscopies, thermogravimetric analysis, and atomic force and transmission electron microscopies were used to characterize the products.     

New strategies for the chemical characterization of multi-walled carbon nanotubes and their derivatives

Industrially relevant characterization of multi-walled carbon nanotubes (MWCNT) is still a challenging task. The aim of this work is to show novel and fast concepts for the chemical characterization of carbon nanotubes (CNT) by a combination of analytical techniques. Information obtained by individual tools like Fourier transform infrared spectroscopy (FTIR), attenuated total reflection infrared spectroscopy or Raman spectroscopy is not providing a full picture of the functionalization of MWCNTs. However, a combination of tools such as FTIR or mass spectrometry with thermogravimetric methods proved to be very useful. Sample preparation for FTIR and Raman spectroscopy is another focus of this contribution because of its strong effect on the results obtained. We also are suggesting methods for sample preparation that lead to highly reproducibility results. Measurements have been carried out on typical CNT samples such as commercially available pristine, carboxylated and amino-functionalized MWCNTs, and on polystyrenegrafted MWCNTs. The results may serve as a guidance for the qualitative and quantitative characterization of CNT.

Selective synthesis combined with chemical separation of single-walled carbon nanotubes for chirality selection

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality distribution by selective growth or chemical separation has been an active area of research. Here, we demonstrate that a new, bimetallic FeRu catalyst affords SWNT growth with narrow diameter and chirality distribution in methane CVD. At 600 degrees C, methane CVD on FeRu catalyst produced predominantly (6,5) SWNTs according to UV-vis-NIR absorption and photoluminescence excitation/emission (PLE) spectroscopic characterization. At 850 degrees C, the dominant semiconducting species produced are (8,4), (7,6), and (7,5) SWNTs, with much narrower distributions in diameter and chirality than materials grown by other catalysts. Further, we show that narrow diameter/chirality growth combined with chemical separation by ion exchange chromatography (IEC) greatly facilitates achieving single (m,n) SWNT samples, as demonstrated by obtaining highly enriched (8,4) SWNTs with near elimination of metallic SWNTs existing in the as-grown material.     

The possible way to evaluate the purity of double-walled carbon nanotubes over single wall carbon nanotubes by chemical doping

Here, we carried out Raman study on chemically doped single wall carbon nanotube (SWNT)/double-walled carbon nanotube (DWNT) mixed bucky-papers. Their highly different Raman responses (e.g., a large upshift of tangential mode of SWNT and no large changes in the frequencies of tangential mode assigned to the outer tubes of the DWNT) upon doping with the sulfuric acid could be used as a qualitative indicator of the purity of the DWNT samples with the concentration of its SWNTs contents.     

Novel conductive nanocomposites from perfluoropolyether waterborne polyurethanes and carbon nanotubes

The exceptional electrical conductivity of carbon nanotubes (CNTs) has been exploited for the preparation of conductive nanocomposites based on a large variety of insulating polymers. Among these, perfluoropolyether‐polyurethanes (PFPE‐PUs) represent a class of highly performing fluorinated materials with excellent water/oil repellency, chemical resistance, and substrate adhesion. The incorporation of highly conductive fillers to this class of highly performing materials allows them to be exploited in new technological and industrial fields where their unique properties need to be combined with the electrical conductivity or the electrostatic dissipation properties of carbon nanotubes. However, no studies have been presented so far on nanocomposites based on PFPE‐PUs and CNTs. In this work, polymer nanocomposites based on waterborne PFPE‐PUs and increasing amounts of carboxylated multiwall CNTs (COOH‐CNTs) were prepared and characterized for the first time. The effect of increasing concentration of COOH‐CNTs on the physical, mechanical, and surface properties of the nanocomposites was investigated by means of rheological measurements, dynamic mechanical analysis, thermal characterization, optical contact angle measurements, and scanning electron microscopy. In addition, electrical measurements showed that the highly insulating undoped PFPE‐PU system undergoes substantial modifications upon addition of COOH‐CNTs, leading to the formation of conductive nanocomposites with electrical conductivities as high as 1 S/cm. The results of this study demonstrate that the addition of COOH‐CNTs to PFPE‐PU systems represents a promising strategy to expand their possible use to technological applications where chemical stability, water/oil repellence and electrical conductivity are simultaneously required. Copyright © 2014 John Wiley & Sons, Ltd.