甲醛在CeO2(111)表面吸附的密度泛函理论研究

采用基于第一性原理的密度泛函理论和周期平板模型, 研究了甲醛在以桥氧为端面的CeO2(111)稳定表面上的吸附行为. 通过对不同覆盖度, 不同吸附位的甲醛吸附构型、吸附能及电子态密度的分析发现, 甲醛在CeO2(111)表面存在化学吸附与物理吸附两种情况. 化学吸附结构中甲醛的碳、氧原子分别与表面的氧、铈原子发生相互作用, 形成CH2O2物种; 吸附能随着覆盖度的增加而减小. 与自由甲醛分子相比, 物理吸附的甲醛构型变化不大, 其吸附能较小. 利用CNEB(climbing nudged elastic band)方法计算了甲醛在CeO2(111)表面的初步解离反应活化能(约1.71 eV), 远高于甲醛脱附能垒, 这与甲醛在清洁CeO2(111)表面程序升温脱附实验中产物主要为甲醛的结果相一致.     

PdAu(100)和PdAu(111)双金属表面的密度泛函理论研究

采用密度泛函理论(Density Functional Theory DFT)研究Au(100)和Au(111)表面含有不同Pd构型时表面的形成能.结果表明,非连续Pd构型的形成能较连续Pd构型的低,在表面易形成,其中第二临位Pd对构型被证实是乙烯与醋酸结合生成醋酸乙烯反应中催化活性最高的构型.随后计算CO在不同表面Pd原子的顶位吸附能和Pd原子的d带中心,结果显示表面Pd原子与相邻金原子之间几乎没有电子传递,并且PdAu(111)表面的Pd原子d带中心随周围Au原子个数的增加而远离费米能级,伴随着CO在其上吸附能的减小,但是同样的趋势在PdAu(100)表面不存在.最后,通过计算,CO在金属表面的吸附机理为CO成键轨道5σ的电子传递给Pd原子的d带,而Pd原子的d带电子又反馈回CO的反键轨道2π*.     

中性团簇(CeO2)m(m=1~3)活化甲烷C—H的密度泛函理论计算

采用密度泛函理论(DFT)计算了CH₄在电中性(CeO₂)_m(m=1~3)团簇上的活化情况, 并对其机理进行了探讨. 计算结果表明, 甲烷C—H键在团簇上的活化为亲核加成模式, 电子由团簇流向甲烷C—H反键轨道, 使甲烷C—H键削弱而得以活化, 反应的过渡态为四中心结构. 团簇的桥氧位活化甲烷C—H键的活性大于端氧位, 而三重桥氧位的活性高于二重桥氧位. 团簇中作用位点Ce和O原子的电荷布居与其活化甲烷C—H的能力密切相关. 溶剂的存在不仅降低了甲烷C—H活化自由能垒, 而且使与甲烷作用的团簇各位点的活性差异缩小.     

DOPA醌在Cu(100)表面吸附的密度泛函理论研究

采用广义梯度密度泛函理论(GGA)的BLYP方法结合周期性平板模型,以原子簇Cu41为模拟表面,对DOPA醌分子在Cu(100)表面不同位置的吸附模型进行了构型优化、能量计算以及Mulliken布居分析,结果表明通过相邻的羰基垂直吸附在表面的桥位是其最佳吸附方式,吸附能为247.2310kJ/mol;其次为顶位、顶位R45和穴位,吸附能分别为227.7162kJ/mol、220.7305kJ/mol和217.8456kJ/mol。Mulliken布居分析结果表明整个吸附体系发生了由Cu原子向DOPA醌分子的电荷转移。     

Ni(100)表面吸附SO2的密度泛函研究

以原子簇Ni14为模拟表面,采用DFT/B3LYP方法研究了二氧化硫(SO2)分子在Ni(100)表面的吸附构型、能量、电荷及态密度。结果表明,SO2分子通过S原子平铺吸附在Ni(100)的桥位最有利,计算结果与实验相符。电荷密度及态密度分析表明,Ni原子的d轨道与SO2分子的空p轨道之间存在明显的s-p作用和电荷转移,这一作用可能导致SO2分子发生解离。     

苯分子在Cu(100)面平板模型上吸附的密度泛函理论研究

使用量子化学中的密度泛函理论和平板周期模型方法，研究了苯在Cu(100)面上的吸附方式和相对稳定性. 计算结果表明，苯在Cu(100)表面的吸附属于较强的化学作用，稳定性穴位优于桥位，顶位吸附最不稳定. 在吸附过程中，C—C键有相对大的伸长，C—H键的键长变化较小，但是偏离苯环平面，并背离固体表面，顶位则是朝向表面. 吸附过程中，发生了电子从苯向铜原子的转移.     

丙烯腈在Cu(100)表面化学吸附的密度泛函理论研究

利用密度泛函方法, 模拟金属铜原子簇Cu₁₄(9,4,1)的(100)表面, 对丙烯腈(CH₂＝CHCN)在Cu(100)面上不同吸附位的吸附状况进行了理论研究. 结果表明: 丙烯腈分子通过端位N原子垂直吸附在金属表面上为弱化学吸附, 部分电荷从丙烯腈分子转移至铜金属簇; 由N原子的孤对电子与金属铜形成弱σ共价键; 顶位是最佳吸附位, 吸附能为40.7391 kJ•mol^－1, N原子与金属表面间的平衡距离为0.2279 nm; 其次为桥位和穴位, 吸附能分别为36.2513和30.2158 kJ•mol^－1, 平衡距离为0.2194和0.2886 nm; 吸附后C≡N键的强度降低, 活化了丙烯腈分子. 化学吸附使体系的熵减小, 是由于丙烯腈分子的平动和转动因吸附而被限制.     

Cu(100)表面吸附CN的密度泛函研究

采用密度泛函方法,以原子簇Cu14为模拟表面,对CN自由基分子在垂直和平行Cu(100)表面不同位置的吸附情况进行了研究,结果表明：通过原子C垂直吸附在表面的顶位是其最佳吸附方式,吸附后CN键振动频率发生蓝移;而其它吸附方式中CN键振动频率均发生红移．DOS和电荷转移分析指出CN通过C端吸附在表面顶位位置时,Cu与CN之间具有较强的σ成键和较弱的π反键特征．     

贵金属原子在CeO2(111)表面吸附的密度泛函理论研究

利用密度泛函理论系统研究了贵金属原子(Au、Pd、Pt和Rh)在CeO₂(111)表面的吸附行为。结果表明,Au吸附在氧顶位最稳定,Pd、Pt倾向吸附于氧桥位,而Rh在洞位最稳定。当金属原子吸附在氧顶位时,吸附强度依次为Pt > Rh > Pd > Au。Pd、Pt与Rh吸附后在Ce 4f、O 2p电子峰间出现掺杂峰;Au未出现掺杂电子峰,其d电子峰与表面O 2p峰在-4～-1 eV重叠。态密度分析表明,Au吸附在氧顶位、Pd与Pt吸附在桥位、Rh吸附在洞位时,金属与CeO₂(111)表面氧原子作用较强,这与Bader电荷分析结果相一致。     

二甲醚在Pt(100)表面吸附的密度泛函理论研究

采用密度泛函理论(DFT)方法结合周期性平板模型,研究了二甲醚(DME)分子在Pt(100)表面上的吸附.通过对不同吸附位(顶位、空位和桥位)下的几何结构、吸附能和mulliken电荷布局计算发现,吸附后C-O键和C-H键都有不同程度的伸长,top位的吸附能最大,hcp位最小;top位吸附有利于C-O键的断裂,bri位吸附则更利于C-H键的断裂。     

CeO2(110)负载Au纳米颗粒催化CO+NOx反应的DFT+U研究

通过在位库伦校正的密度泛函理论（DFT+U）方法计算,我们研究了CO和NO_x分子在Au负载CeO₂（110）表面的吸附. 结果表明,CO在Au纳米颗粒的顶位有很强的吸附能,大约为1.2 eV,而NO在Au纳米颗粒上或者Au与CeO₂载体界面处都是弱吸附. 然而,当NO_x在界面处形成N₂O₂二聚体之后,通过断裂末端的N-O键能够有效地被降解. 纵观整个反应过程,第一步CO+N₂O₂的反应遵循了Langmuir-Hinshelwood机理,活化能只有0.4 eV,通过形成ONNOCO的中间物种最终产生N₂O和CO₂. 不同的是,第二步消除N₂O反应遵循了Eley-Rideal碰撞机理,需要相当高的能垒,约为1.8 eV. 通过进一步分析表明,稀土Ce元素独特的电子特性能够使电子从Au上转移并且局域到载体表面的Ce阳离子上,并且有助于形成带负电的N₂O₂分子. 而且Au纳米颗粒有很强的结构流动性,能够促进吸附的CO分子靠近界面处的N₂O₂并与之反应.     

Atom-molecule interactions on transition metal surfaces: a DFT Study of CO and several atoms on Rh(100), Pd(100) and Ir(100).

Density functional theory (DFT) calculations have been performed to determine the interaction energy between a CO probe molecule and all atoms from the first three rows of the periodic table coadsorbed on Rh(100), Pd(100) and Ir(100) metal surfaces. Varying the coverage of CO or the coadsorbed atom proved to have a profound effect on the strength of the interaction energy. The general trend, however, is the same in all cases: the interaction energy becomes more repulsive when moving towards the right along a row of elements, and reaches a maximum somewhere in the middle of a row of elements. The absolute value of the interaction energy between an atom-CO pair ranges from about -0.40 eV (39 kJ mol(-1)) attraction to +0.70 eV (68 kJ mol(-1)) repulsion, depending on the coadsorbate, the metal and the coverage. The general trend in interaction energies seems to be a common characteristic for several transition metals.     

Insights and Activation Energy Surface of the Dehydrogenation of C2HxO Species in Ethanol Oxidation Reaction on Ir(100)

Dehydrogenation of an organic compound is the first and the most fundamental elementary reaction in many organic reactions. In ethanol oxidation reaction (EOR) to form CO₂, there are a total of 46 pathways in C₂H_xO (x=1–6) species leading to the removal of all six hydrogen atoms in five C−H bonds and one O−H bond. To investigate the degree of dehydrogenation in EOR under operando conditions, we performed density function theory (DFT) calculations to study 28 dehydrogenation steps of C₂H_xO on Ir(100). An activation energy surface was then constructed and compared with that of the C−C bond cleavages to understand the importance of the degree of dehydrogenation in EOR. The results show that there are likely 28 dehydrogenations in EOR under fuel cell temperatures and the last two hydrogens in C₂H₂O are less likely cleaved. On the other hand, deep dehydrogenation including 45 dehydrogenations can occur under ethanol steam reforming conditions.     

Decomposition of methylamine on Mo(100) surface: A DFT study

The initial decomposition of methylamine on Mo(100) surface has been investigated by self-consistent (GGA-PW91) density functional theory combined with periodic slab model. The adsorption energies of possible species and the activation energies for possible elementary reactions involved are obtained in the present work. Our results indicate that the barriers decreased with the order of C-N>N-H>C-H. In addition, metastable adsorption of the abstracted hydrogen atom on the hollow site in the final state is also considered for the N-H and C-H bond breaking. For the C-H bond cleavage, the reaction barrier that the abstracted hydrogen located on the hollow site in the final state is lower than that on the bridge site. However, for the N H bond breaking, the barriers are alike for the abstracted hydrogen on both hollow and bridge sites in the final state.     

Study of CO adsorption on perfect and defective pyrite(100)surfaces by density functional theory

First-principles calculations based on density functional theory (DFT) and the generalized gradient approximation (GGA) have been used to study the adsorption of CO molecule on the perfect and defective FeS 2 (100) surfaces. The defective Fe 2 S(100) surfaces are caused by sulfur deficiencies. Slab geometry and periodic boundary conditions are employed with partial relaxations of atom positions in calculations. Two molecular orientations, Cand O-down, at various distinct sites have been considered. Total energy calculations indicated that no matter on perfect or deficient surfaces, the Fe position is relatively more favored than the S site with the predicted binding energies of 120.8 kJ/mol and 140.8 kJ/mol, respectively. Moreover, CO was found to be bound to Fe atom in vertical configuration. The analysis of density of states and vibrational frequencies before and after adsorption showed clear changes of the C–O bond.     

甲醇在Ru(0001)表面吸附的密度泛函研究

采用密度泛函理论(DFT)的B3LYP方法,以原子簇Ru15为模拟表面,对甲醇在理想的Ru(0001)面三种吸附位置(top,fcc,hcp)的吸附模型进行了几何构型优化,能量计算,Mu lliken布局分析以及振动频率计算,结果表明顶位为最有利的吸附位.这些变化与实验观察到的甲醇在过渡金属表面解离的结果相一致.同时通过对吸附过程的分析推测其可能的解离途径.     

洁净和氧吸附的Cu(100)表面重构的理论研究

The interaction of atomic oxygen with the clean Cu(100) surface has been studied by means of cluster and periodic slab models density functional theory in the present paper. The Cu(4,9,4) cluster and a three-layer slab with c(2×2) structure are used to model the perfect Cu(100) surface. Three possible adsorption sites,top, bridge and hollow site, were considered in the calculations. The predicted results show that the hollow site is the prefer site for atomic oxygen adsorbed on Cu(100) surface energetically. This is in good agreement with the experiment. The calculated binding energies are respective 2.014, 3.154 and 3.942 eV for top, bridge and hollow sites at mPW1PW91/LanL2dz level for the cluster model. The geometry of Cu(100) surface has also been optimized theoretically with various density functional methods and the results show that the prediction from the B3PW91/LanL2dz and mPW1PW91/LanL2dz reproduce the experimental observation.The frontier molecular orbitals and partial density of states analysis show that the electron transfer from the d orbital of substrate to the p orbital of the surface oxygen atom.     

甲醇在FeS2(100)完整表面的吸附和分解

采用基于第一性原理的密度泛函理论结合周期平板模型方法, 研究了甲醇分子在FeS₂(100)完整表面的吸附与解离. 通过比较不同吸附位置的吸附能和构型参数发现: 表面Fe位为有利吸附位, 甲醇分子通过氧原子吸附在表面Fe位, 吸附后甲醇分子中的C―O键和O―H键都有伸长, 振动频率发生红移; 甲醇分子易于解离成甲氧基CH3O和H, 表面Fe位仍然是二者有利吸附位. 通过计算得出甲醇在FeS₂(100)表面解离吸附的可能机理: 甲醇分子首先发生O―H键的断裂, 生成甲氧基中间体, 继而甲氧基C―H键断裂, 得到最后产物HCHO和H₂.