Effect of Thermal Treatment on Sorption Activity of Calcium and Magnesium Phosphates

The effect of thermal treatment in the range 20-800°C on the activity of hydrated calcium and magnesium phosphates in recovery of heavy metal ions from aqueous solutions was studied. The composition and sorption properties of materials obtained in all stages of thermal treatment of hydrophosphates and phosphates are considered. The manner in which the sorption activity of phosphates changes upon thermal treatment is interpreted.     

Thermal Analysis of Ba(II)–Sr(II) Cyclo-Tetraphosphates(V)

The synthesis of new inorganic pigments has been investigated with the goal of preparing heat stable and anticorrosive pigments. The synthesis is based on a thermal procedure making use of the reversible transformation of cyclo-tetraphosphates(V) to higher linear phosphates(V). New binary condensed phosphates were synthesized based on the results of thermal analysis. These compounds represent new environmentally-friendly special pigments. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis,characterization and thermodynamic data of compounds with NZP structure

Data on synthesis, thermal behavior and thermodynamic properties for the NZP phosphates NaMe₂(PO₄)₃ and Na₅Me(PO₄)₃ (Me=Ti, Zr, Hf) are reported. The compounds were synthesized by sol-gel method and solid-state reactions and characterized by X-ray powder diffraction, IR spectroscopy, electron microprobe and chemical analysis. Their thermal behavior was studied by the DTA measurements. The heat capacities of the phosphates were measured between temperatures 7 and 650 K. The fractal dimensions for the phosphates were calculated. The obtained thermodynamic characteristics of these phosphates and also literature data for the compounds of NZP type structure are summarized.     

Thermal stability and flame retardancy of novel phloroglucinol based organo phosphorus compound

A series of organo phosphorus flame retardants (FR) based on cyclic phosphates were synthesized in an attempt to find an efficient FR for polycarbonate (PC) and acrylonitrile-butadiene-styrene copolymer (ABS). The success of synthesis was confirmed by FT-IR and ¹H and ³¹P NMR. Their thermal stability and flame-retarding efficiency as a single component additive were investigated and compared with those of aromatic based phosphate, resorcinol bis(diphenyl phosphate) (RDP). Thermogravimetric analysis (TGA) results reveal that cyclic phosphates synthesized in this study show more than one-step degradation and act in the condensed phase mechanism rather than in the vapor phase mechanism. Flame-retarding efficiency was evaluated by UL-94 test method. V-0 rating was achieved at 3-5 wt% of FR loading for PC, which is better than the FR performance of RDP. The high P-OH generation tendency is responsible for the better FR performances of these compounds. The degradation path is also discussed.     

Photochemically induced disturbance of the alkyl chain packing in vesicular membranes

In previous reports, we presented the synthesis and properties of double-tailed azobenzene-substituted phosphate amphiphiles (Kuiper et al. Synthesis 2003, 695 and Kuiper et al. Langmuir 2004, 20, 1152). We also reported that an ion channel can be regulated by trans-cis isomerization of these amphiphiles, which were incorporated in the membrane (Folgering et al. Langmuir 2004, 20, 6985). In the present study, the effect of trans-cis isomerization of both single- and double-tailed azobenzene-substituted amphiphiles on the aggregation and packing behavior has been studied. The phase transition temperature of a membrane and the thermal half-life times of the cis azobenzene-substituted amphiphiles in membranes have been measured. Furthermore, the synthesis and properties of single-tailed azobenzene-substituted phosphate amphiphiles are described and compared with those of the double-tailed analogues. The single-tailed azobenzene-substituted phosphates have a low solubility in water and form micelles, sheets, and crystals. In all cases the trans-cis isomerization leads to a disturbance of the chain packing. Both single- and double-tailed cis azobenzene-substituted phosphates lowered the main phase transition temperature of bilayer membranes. The effect increased when the azobenzene moiety was situated closer to the head group. Accordingly, the half-life times of the cis azobenzene group was shorter when the azobenzene group was positioned closer to the head group for both the single- and double-tailed amphiphiles. Interestingly, the thermal cis-trans isomerization of the single-tailed azobenzene-substituted phosphates was faster in a DOPC membrane than that for the free monomer in aqueous solution.     

Synthesis of Calcium and Magnesium Phosphates from Natural Carbonates and Study of Their Activity in Reactions with Lead(II) Ions

Chemical and thermal methods for obtaining calcium and magnesium phosphates from natural carbonate raw materials were studied. The activity of these compounds in uptake of lead(II) ions from solution was evaluated.     

Kinetics of thermal decomposition of some nitrophosphate fertilizers with micronutrients in isothermal conditions

The thermal behavior under isothermal conditions of some ammonia nitrate, ammonia phosphates and calcium phosphates mixtures with added micronutrients was studied. In order to establish the variation of activation energy (E) vs. conversion (α), the TG data were interpolated with spline functions, followed by numeric derivation. Using the so determined reaction rate the Friedman differential-isoconversional method was applied. A dependence of the activation energy vs. conversion was observed, meaning a many-step reaction. Therefore a procedure based on the compensation effect (and suggested by Budrugeac and Segal) was applied.     

A thermal,sorptive and spectral study of HDTMA-bentonite loaded with uranyl phosphate

The influence of phosphate ions on the thermal stability of complexes obtained by adsorption of uranium(VI) on organobentonite was determined. Organoclay samples were prepared by the reaction of hexadecyltrimethylammonium bromide with bentonite. The isotherms of sorption/desorption of U(VI) from aqueous solutions containing phosphate ions onto different forms of bentonite were measured using the batch method. The highest amount of uranium was absorbed on HDTMA-bentonite in the presence of phosphates. This may have been associated with the complexing of U(VI) ions by phosphate ions, which interacted with surfactant cations probably via electrostatic forces. A TG–DSC–MS study showed that the thermal decomposition of the surfactant sorbed on bentonite proceeded in two stages: at 200–400 and at 600–800 °C. The first stage involved defragmentation and oxidation of surfactant cations present in the interior and on the surface of the mineral. The second stage involved oxidation of charcoal and simultaneous dehydroxylation of the sorbent. The oxidation of surfactant cations and the dehydroxylation of the mineral were suppressed in the presence of phosphates.     

Layered Group(IV) Metal Phosphates as Catalysts for MTBE Synthesis

Layered group(IV) metal phosphates and their phenylsulfonic acid derivatives were used as catalysts for the synthesis of methyl tert-butyl ether (MTBE) from methanol and isobutene. Because zirconium and titanium phosphates have only moderate acidic strength, relatively high temperatures are required to activate their Brønsted acidic sites. The optimal activity was obtained at ca. 443 K. Their phenylsulfonic acid derivatives, however, demonstrated higher acidic strength by giving much higher activity toward MTBE formation at relatively low temperaures. The catalysts were characterized in terms of their structure, thermal stability, surface area and acidic strength.     

Fabrication of nano-crystalline cellulose with phosphoric acid and its full application in a modified polyurethane foam

Nano-crystalline cellulose was fabricated in an anhydrous phosphoric acid system with medical absorbent cotton as its raw material. After ammonia neutralization, the whole system with produced phosphates and hydrolyzed saccharides was used as a modifier for preparing polyurethane foam (PUF). The NCC worked as a reinforce material, the phosphates served as flame-retardants, and the hydrolyzed saccharides partly replaced polyol. The addition of the modifier significantly improved mechanical property and flame-retardancy without an inferior thermal conductivity. When the dosage of modifier was 6% of the whole polyol, compressive strength increased 4.29 times, heat release rate dropped to 50.7%, and time to ignition extended to 2.6 times of those of the neat PUF. XRD and TEM analyses proved that the NCC in the modifier was rod-shape cellulose Ⅱ with diameter of 10 nm or so. FTIR analysis confirmed that the modifier well reacted with isocyanate, and SEM results revealed that the flame-retardant PUF had more uniform cells and more regular skeleton structure than the neat PUF.     

NH3 TPD study and thermal behaviour of vanadium-exchanged titanium phosphates as catalysts

The ion exchange technique was employed for the preparation of VO²⁺ modified titanium phosphates as catalysts for the selective reduction of NO with NH₃. The samples were prepared by contacting with a vanadyl sulphate solution different precursor materials, amorphous, crystalline or sodium half exchanged titanium phosphate. The vanadium contents of modified phosphates were in the range 0.08–2.3 wt%. XRD and thermal analysis TG/DTA showed that vanadium loading does not cause structural modification in hydrogen titanium phosphate. A vanadyl containing phase was obtained when half sodium titanium phosphate was employed. The NH₃ TPD measurements indicated the presence of a wide distribution of NH₃ adsorbing sites with medium-high strength. Catalytic activity measurements were performed under dilute conditions. It was found that the presence of vanadium even in low amounts strongly promote the catalytic activity.     

Etude a 25°C du diagramme de solubilite constitue a partir des ions K+, Ca2+, H+/ SO 4 2− , PO 4 3− , OH−, H2O

The aim of the study was to investigate the solubility properties of the phosphogypsum a sideproduct of phosphor industry. Phase diagrams of potassium, calcium, hydrogen phosphates, sulphates and water are presented in order to determine equilibrium of solubility. Solid phases were investigated by X-ray diffraction, IR spectrometry and thermal analysis (DTG-DTA).     

Thermoanalytical investigation of layered titanium salts

The investigated materials have similar routes of thermal decomposition; i.e. they lose their crystal water first, then at a higher temperature their structural one. At least the result TiP₂O₇ goes through a phase change at about 1000 K. The amorphous titanium phosphate lost its crystal and structural water at higher temperature than those of crystalline forms. Both α- and γ-titanium phosphates and also their transition metal containing forms have layered structure. In case of α- and γ-forms after the loss of crystal water a phase change occurs which is followed by the decomposition of the molecule. Various transition metals containing γ-titanium phosphates lose their crystal water at the same temperature, with the exception of Ni containing ones. The process is finished in this case at temperature 90 K higher than that of the others. This revised version was published online in July 2006 with corrections to the Cover Date.     

Flame retardancy mechanisms of aluminium phosphinate in combination with melamine polyphosphate and zinc borate in glass-fibre reinforced polyamide 6,6

The fire retardancy mechanisms of aluminium diethylphosphinate in combination with melamine polyphosphate and zinc borate was analysed in glass-fibre reinforced polyamide 6,6. The influence of phosphorus compounds on the polyamide decomposition pathways was characterized using thermal analysis (TG), evolved gas analysis (TG-FTIR), and FTIR-ATR analysis of the residue. The Lewis acid-base interactions between the flame retardants, the amide unit, and the metal ions control the decomposition. The flammability (LOI, UL 94) and performance under forced-flaming conditions (cone calorimeter using different irradiations) were investigated. Fire residues were analysed with FTIR-ATR, SEM-EDX, and NMR. Aluminium phosphinate in polyamide 6,6 acts mainly by flame inhibition. Melamine polyphosphate shows some fuel dilution and a significant barrier effect. Using a combination of aluminium phosphinate and melamine polyphosphate results in some charring and a dominant barrier effect. These effects are improved in the presence of zinc borate due to the formation of boron-aluminium phosphates instead of aluminium phosphates.     

On the volatility of ruthenium

When annealing the evaporation residue formed by evaporating a solution containing ruthenium, phosphates and nitrates, ruthenium volatilizes. The amount of volatilized ruthenium (both¹⁰⁶Ru traces and milligram amuonts of Ru) depends on the solution composition before evaporation and on the temperature and time of annealing. Volatility occurs at a temperature as low as 300°C. We suppose that the volatility is due to thermal decomposition of the ruthenium compounds with phosphates. The released atoms of ruthenium are oxidized by the decomposition products of the nitrate. The formation of complex compounds of ruthenium with phosphates during the evaporation of the solution follows from the data of elemental and spectral analysis and ion exchange chromatography.     

Study of the effects of thermal treatment on chemical and physical characteristics of phosphates

Via the thermal treatment of natural phosphates and their analysis, it was proved that the decrease in their solubility in the interval 400–550°C is an indication of the degree of incorporation of OH groups into the apatite structure of phosphates, whereas the solubility at 950°C is an indication of the degree of incorporation of the non-volatile components. The higherR ₉₅₀, the more extensive this substitution, and the more reactive the natural phosphate.     

Thermal behaviour of acidic salts of mixed tetravalent metals

The mixed metal phosphates were synthetized by the HF method, the resulting materials being crystalline. Thermal analysis revealed that they contain almost one mole of crystalline water per molecule unit. The mode of thermal decomposition of the samples was similar to those for crystalline phosphates containing only zirconium or titanium.

---

Zusammenfassung Die Mischmetallphosphate wurden mit der HF-Methode hergestellt, wobei man kristalline Substanzen erhielt. Die Thermoanalyse zeigte, daß sie fast ein Molekül Kristallwasser pro Moleküleinheit besitzen. Die Art der thermischen Zersetzung der Proben ähnelt der Zersetzung von kristallinen Phosphaten von nur Zirkonium oder nur Titan.

     

Simultaneous thermal/mass spectral investigations of ammonium exchanged zirconium phosphates and zirconium arsenates

The half- and fully-ammonium ion exchanged forms of α- and γ-zirconium phosphates and of α-zirconium arsenate have been prepared. Their modes of thermal decomposition were studied by thermal methods of analysis, including simultaneous DTA/mass spectrometry. The samples heated to various temperatures were also characterized by X-ray diffraction analysis together with IR spectroscopy. The loss of water and ammonia of the various exchanged samples is compared in terms of the changes taking place in the layer lattice upon heating. The use of DTA/MS for a system involving water and ammonia as volatiles is demonstrated     

Thermochemical investigations of natural phosphate with ammonium sulfate additive

Summary The free energy of the acidic ammonium sulfate is a good precondition its use as an additive or reagent for decomposition of natural phosphates on the way to obtain NPS or NPKS complex fertilizers. During our previous studies it was confirmed that as a result of thermo-mechanical treatment new solid phases are formed as a result of the phosphates decomposition. The aim of this study is to find out appropriate conditions for thermal treatment of Tunisia phosphorite with ammonium sulfate where the content of P₂O₅ soluble forms has its maximum. The process was investigated under dynamic thermal conditions. Structure and phase transformations of the mixtures to intermediate and final solid products are confirmed by different techniques. X-ray powder diffraction, infrared spectroscopy and electron microscopy have been applied successfully and relationship found between phase structure and thermal treatment applied. As a result of the complex studies optimal temperatures are determined. The solid products under optimal conditions contain phosphorous in soluble forms available for plants in the soil. As a final it is concluded that the final products could be used as complex mineral fertilizers.     

The Thermal Analysis of Binary Zn(II)–Sr(II) Cyclo-tetraphosphates

Binary Zn(II)–Sr(II) cyclo-tetraphosphates have been synthesised as new binary compounds. The synthesis is based on a thermal procedure making use of the reversible transformation of cyclo- tetraphosphates to higher linear phosphates. With respect to the proposed application of these products as special inorganic pigments some properties (thermal stability, structural parameters, anticorrosion activity) have been determined. This revised version was published online in August 2006 with corrections to the Cover Date.