Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

Stepwise formation of quasi-octahedral macrocyclic complexes of rhodium(III) and iridium(III) bearing a pentamethylcyclopentadienyl group

Reactions of [[MCl2(Cp*)]2] (1: M=Ir, 2: M=Rh) with bidentate ligands (L) such as 1,4-diisocyano-2,5-dimethylbenzene (a), 1,4-diisocyano-2,3,5,6-tetramethylbenzene (b), pyrazine (c) or 4,4'-dipyridyl (d) gave the corresponding dinuclear complexes [[MCl2(Cp*)]2(L)] (M=Ir: 3a, 3b, 5c, 5d; M=Rh: 4b, 6c, 6d), which were converted into tetranuclear complexes [[M2(mu-Cl)2(Cp*)2]2(L)2](OTf)4 (M=Ir: 7c, 7d, 9a, 9b; M=Rh: 8e, 8d, 10b) on treatment with Ag(OTf). X-ray analyses of 8c and 8d revealed that each of four pentamethylcyclopentadienyl metal moieties was connected by two mu-Cl-bridged atoms and a bidentate ligand to construct a rectangular cavity with the dimensions of 3.7 x 7.0 A for 8c and 3.7 x 11.5 A for 8d. Both the Rh2Cl2 and pyrazine (or 4,4'dipyridyl) ring planes are perpendicular to the Rh4 plane. Treatment of Cl-bridged complexes (7c, 7d, 8e, 8d, 9b, and 10b) with a different ligand (L') resulted in cleavage of the Cl bridges to produce two-dimensional complexes [[MCl(Cp*)]4[(L)-(L')]2](OTf)4 (11ac, 11bc, 11bd, 12bc, and 12bd) with two different ligand "edges". Complex 10b reacted readily with 1,4-diisocyano-2,3,5,6-tetramethylbenzene (b) to give a tetranuclear rhodium(III) complex 12bb. The structure of tetranuclear complexes was confirmed by X-ray analysis of 11bc. Each [MCp*] moiety is surrounded by a Cl atom, isocyanide, and pyrazine (or 4,4'-dipyridyl) and the dimensions of its cavity are 7.0 x 11.6 A.     

Yttrium and erbium halide complexes with [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] as a neutral tridentate ligand

Treatment of [{TiCp*(mu-NH)} 3(mu 3-N)] ( 1; Cp* = eta (5)-C 5Me 5) with yttrium and erbium halide complexes [MCl 3(THF) 3.5] and [MCpCl 2(THF) 3] (Cp = eta (5)-C 5H 5) gives cube-type adducts [Cl 3M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] and [CpCl 2M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}]. An analogous reaction of 1 with [{MCp 2Cl} 2] in toluene affords [Cp 3M(mu-Cl)ClCpM{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] (M = Y, Er).     

Synthesis and reactivity of Ir(I) and Ir(III) complexes with MeNH2, Me2C=NR (R = H, Me), C,N-C6H4{C(Me)=N(Me)}-2, and N,N'-RN=C(Me)CH2C(Me2)NHR (R = H, Me) ligands

Complexes [Ir(Cp*)Cl(n)(NH2Me)(3-n)]X(m) (n = 2, m = 0 (1), n = 1, m = 1, X = Cl (2a), n = 0, m = 2, X = OTf (3)) are obtained by reacting [Ir(Cp*)Cl(mu-Cl)]2 with MeNH2 (1:2 or 1:8) or with [Ag(NH2Me)2]OTf (1:4), respectively. Complex 2b (n = 1, m = 1, X = ClO 4) is obtained from 2a and NaClO4 x H2O. The reaction of 3 with MeC(O)Ph at 80 degrees C gives [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(NH2Me)]OTf (4), which in turn reacts with RNC to give [Ir(Cp*){C,N-C6H4{C(Me)=N(Me)}-2}(CNR)]OTf (R = (t)Bu (5), Xy (6)). [Ir(mu-Cl)(COD)]2 reacts with [Ag{N(R)=CMe2}2]X (1:2) to give [Ir{N(R)=CMe2}2(COD)]X (R = H, X = ClO4 (7); R = Me, X = OTf (8)). Complexes [Ir(CO)2(NH=CMe2)2]ClO4 (9) and [IrCl{N(R)=CMe2}(COD)] (R = H (10), Me (11)) are obtained from the appropriate [Ir{N(R)=CMe2}2(COD)]X and CO or Me4NCl, respectively. [Ir(Cp*)Cl(mu-Cl)]2 reacts with [Au(NH=CMe2)(PPh3)]ClO4 (1:2) to give [Ir(Cp*)(mu-Cl)(NH=CMe2)]2(ClO4)2 (12) which in turn reacts with PPh 3 or Me4NCl (1:2) to give [Ir(Cp*)Cl(NH=CMe2)(PPh3)]ClO4 (13) or [Ir(Cp*)Cl2(NH=CMe2)] (14), respectively. Complex 14 hydrolyzes in a CH2Cl2/Et2O solution to give [Ir(Cp*)Cl2(NH3)] (15). The reaction of [Ir(Cp*)Cl(mu-Cl)]2 with [Ag(NH=CMe2)2]ClO4 (1:4) gives [Ir(Cp*)(NH=CMe2)3](ClO4)2 (16a), which reacts with PPNCl (PPN = Ph3=P=N=PPh3) under different reaction conditions to give [Ir(Cp*)(NH=CMe2)3]XY (X = Cl, Y = ClO4 (16b); X = Y = Cl (16c)). Equimolar amounts of 14 and 16a react to give [Ir(Cp*)Cl(NH=CMe2)2]ClO4 (17), which in turn reacts with PPNCl to give [Ir(Cp*)Cl(H-imam)]Cl (R-imam = N,N'-N(R)=C(Me)CH2C(Me)2NHR (18a)]. Complexes [Ir(Cp*)Cl(R-imam)]ClO4 (R = H (18b), Me (19)) are obtained from 18a and AgClO4 or by refluxing 2b in acetone for 7 h, respectively. They react with AgClO4 and the appropriate neutral ligand or with [Ag(NH=CMe2)2]ClO4 to give [Ir(Cp*)(R-imam)L](ClO4)2 (R = H, L = (t)BuNC (20), XyNC (21); R = Me, L = MeCN (22)) or [Ir(Cp*)(H-imam)(NH=CMe2)](ClO4)2 (23a), respectively. The later reacts with PPNCl to give [Ir(Cp*)(H-imam)(NH=CMe2)]Cl(ClO4) (23b). The reaction of 22 with XyNC gives [Ir(Cp*)(Me-imam)(CNXy)](ClO4)2 (24). The structures of complexes 15, 16c and 18b have been solved by X-ray diffraction methods.     

Quasi-octahedral complexes of pentamethylcyclopentadienyliridium(III) bearing bis(diphenylphosphinomethyl)phenylphosphine (dpmp)

Reaction of [Cp*IrCl2]2 (1) with dpmp in the presence of KPF6 afforded a binuclear complex [Cp*IrCl(dpmp-P1,P2;P3)IrCl2Cp*](PF6) (2) (dpmp =(Ph2PCH2)2PPh). The mononuclear complex [Cp*IrCl(dpmp-P1,P2)](PF6) (4) was generated by the reaction of [Cp*IrCl2(BDMPP)](BDMPP =PPh[2,6-(MeO)2C6H3]2) with dpmp in the presence of KPF6. These mono- and binuclear complexes have four-membered ring structures with a terminal and a central P atom of the dpmp ligand coordinated to an iridium atom as a bidentate ligand. Since there are two chiral centers at the Ir atom and a central P2 atom, there are two diastereomers that were characterized by spectrometry. Complexes anti-4 and syn-4 reacted with [Cp*RhCl2]2 or [(C6Me6)RuCl2]2, giving the corresponding mixed-metal complexes, anti- and syn- [Cp*IrCl(dppm-P1,P2;P3)MCl2L](PF6) (6: M = Rh, L = Cp*; 7: M = Ru, L = C6Me6). Treatment with AuCl(SC4H8) gave tetranuclear complexes, anti- and syn-8 [[Cp*IrCl(dppm-P1,P2;P3)AuCl]2](PF6)2 bearing an Au-Au bond. Reaction of anti- with PtCl2(cod) generated the trinuclear complex anti-9, anti-[[Cp*IrCl(dppm-P1,P2;P3)]2PtCl2](PF6)2. These reactions proceeded stereospecifically. The P,O-chelated complex syn-[Cp*IrCl(BDMPP-P,O)] (syn-10)(BDMPP-P,O = PPh[2,6-(MeO)2C6H3][2-O-6-(MeO)C6H3]2) reacted with dpmp in the presence of KPF6, generating the corresponding anti-complex as a main product as well as a small amount of syn-complex, [Cp*Ir(BDMPP-P,O)(dppm-P1)](PF6) (11). The reaction proceeded preferentially with inversion. The reaction processes were investigated by PM3 calculation. anti- was treated with MCl2(cod), giving anti-[Cp*Ir(BDMPP-P,O)(dppm-P1;P2,P3)MCl2](PF6)(14: M = Pt; 15: M = Pd), in which the MCl2 moiety coordinated to the two free P atoms of anti-11. The X-ray analyses of syn-2, anti-2, anti-4, anti-8 and anti-11 were performed.     

Syntheses and structures of half-sandwich iridium(III) and rhodium(III) complexes with organochalcogen (S, Se) ligands bearing N-methylimidazole and their use as catalysts for norbornene polymerization

The organochalcogen ligands derived from 3-methyl-imidazole-2-thione/selone groups, Mbit, Mbis, Ebit and Ebis [Mbit = 1,1'-methylenebis(3-methyl-imidazole-2-thione); Mbis = 1,1'-methylenebis(3-methyl-imidazole-2-selone), Ebit = 1,1'-(1,2-ethanediyl)bis(3-methyl-imidazole-2-thione), Ebis = 1,1'-(1,2-ethanediyl)bis(3-methyl-imidazole-2-selone)] have been synthesized and characterized. Reactions of [Cp*Ir(micro-Cl)Cl]2 and [Cp*Rh(micro-Cl)Cl]2 (Cp* = eta5-pentamethylcyclopentadienyl) with Mbit, Mbis, Ebit and Ebis result in the formation of the complexes [Cp*Ir(Mbit)Cl]Cl 1a x Cl), [Cp*Ir(Mbis)Cl]Cl (3a x Cl), [Cp*Ir(Ebit)Cl]Cl (1b x Cl), [Cp*Ir(Ebis)Cl]Cl (2a x Cl), [Cp*Rh(Mbit)Cl]Cl (2b x Cl), Cp*Rh(Mbis)Cl][Cp*RhCl(3)] (3b x[Cp*RhCl(3)]), [Cp*Rh(Ebit)Cl]Cl (4a x Cl) and [Cp*Rh(Ebis)Cl]Cl (4b x Cl), respectively. All compounds have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1b, 2b, 3a, 3b and 4a have been determined by X-ray crystallography. After activation with methylaluminoxane (MAO), the iridium complexes exhibit moderate activities for the vinyl polymerization of norbornene.     

Variable coordination of amine functionalised N-heterocyclic carbene ligands to Ru, Rh and Ir: C-H and N-H activation and catalytic transfer hydrogenation

Chelating amine and amido complexes of late transition metals are highly valuable bifunctional catalysts in organic synthesis, but complexes of bidentate amine-NHC and amido-NHC ligands are scarce. Hence, we report the reactions of a secondary-amine functionalised imidazolium salt 2a and a primary-amine functionalised imidazolium salt 2b with [(p-cymene)RuCl(2)](2) and [Cp*MCl(2)](2) (M = Rh, Ir). Treating 2a with [Cp*MCl(2)](2) and NaOAc gave the cyclometallated compounds Cp*M(C,C)I (M = Rh, 3; M = Ir, 4), resulting from aromatic C-H activation. In contrast, treating 2b with [(p-cymene)RuCl(2)](2), Ag(2)O and KI gave the amine-NHC complex [(p-cymene)Ru(C,NH(2))I]I (5). The reaction of 2b with [Cp*MCl(2)](2) (M = Rh, Ir), NaO(t)Bu and KI gave the amine-NHC complex [Cp*Rh(NH(2))I]I (6) or the amido-NHC complex Cp*Ir(C,NH)I (7); both protonation states of the Ir complex could be accessed: treating 7 with trifluoroacetic acid gave the amine-NHC complex [Cp*Ir(C,NH(2))I][CF(3)CO(2)] (8). These are the first primary amine- or amido-NHC complexes of Rh and Ir. Solid-state structures of the complexes 3-8 have been determined by single crystal X-ray diffraction. Complexes 5, 6 and 7 are pre-catalysts for the catalytic transfer hydrogenation of acetophenone to 1-phenylethanol, with ruthenium complex 5 demonstrating especially high reactivity.     

Approaches to trinuclear half-sandwich carbene complexes containing 1,2-dicarba-closo-dodecaboranes

The synthesis of trinuclear half-sandwich iridium and rhodium complexes containing both N-heterocyclic carbene (NHC) and 1,2-dicarba-closo-dodecaborane ligands is described. Complexes {Cp*M[E2C2(B10H10)]}3(L) (Cp*=pentamethylcyclopentadienyl; L=tris(2-(3-methylimidazol-2-ylidene)ethyl)amine; M=Ir (), Rh (); E=S (), Se ()) were obtained from the reactions of Cp*M[E2C2(B10H10)] (M=Ir (), Rh ()) with a silver-NHC precursor or from the reactions of [Cp*MCl2]3(L) (M=Ir (), Rh ()) with Li2E2C2(B10H10) (E=S, Se). The complexes were characterized by IR, NMR spectroscopy, elemental analysis. In addition, X-ray structure analyses were performed on complexes and .     

Pentamethylcyclopentadienyl-iridium(III) complexes with pyridylamino ligands: synthesis and applications as asymmetric catalysts for Diels-Alder reactions

Reaction of the dimer [(Cp*IrCl)2(P-Cl)2] with chiral pyridylamino ligands (pyam, L1-L5) in the presence of NaSbF6 gave complexes [Cp*IrCl(pyam)][SbF6] 1-5 as diastereomeric mixtures, which have been fully characterised, including the X-ray molecular structure determination of the complexes (S(Ir),R(N),R(C))-[Cp*IrClL1][SbF6] 1a and (R(Ir),S(N),S(C))-[Cp*IrClL5][SbF6] 5a. Treatment of these cations with AgSbF6 affords the corresponding aqua species [Cp*Ir(pyam)(H2O)][SbF6]2 6-10 which have been also fully characterised. The molecular structure of the complex (S(Ir),R(N),R(C))-[Cp*IrL,(H2O)][SbF6]2 6 has been determined by X-ray diffractometric methods. The aqua complexes [Cp*Ir(pyam)(H2O)][SbF6]2 (6, pyam = L2 (7), L3 (8)) evolve to the cyclometallated species [Cp*Ir{kappa3(N,N',C)-(R)-(C6H4)CH(CH3)NHCH2C5NH4}][SbF6] (11), [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)-NHCH2C5NH4)}][SbF6] (12), and [Cp*Ir{kappa3(N,N',C)-(R)-(C10H6)CH(CH3)NHCH2C9NH6)}][SbF6] (13) respectively, via intramolecular activation of an ortho C-H aryl bond. Complexes 6-10 are enantioselective catalysts for the Diels-Alder reaction between methacrolein and cyclopentadiene. Reaction occurs rapidly at room temperature with good exo : endo selectivity (from 81 : 19 to 98 : 2) and moderate enantioselectivity (up to 72%). The involved intermediate Lewis acid-dienophile compounds [Cp*Ir(pyam)(methacrolein)][SbF]2 (pyam = L4 (14), L5 (15)) have been isolated and characterised.     

Linear metal-metal-bonded tetranuclear M-Mo-Mo-M complexes (M = Ir and Rh): oxidative metal-metal bond formation in a tetrametallic system and 1,4-addition reaction of alkyl halides

Reaction of Mo2(pyphos)4 (1) with [MCl(CO)2]2 (M = Ir and Rh) afforded linear tetranuclear complexes of a formula Mo2M2(CO)2(Cl)2(pyphos)4 (2, M = Ir; 3, M = Rh). X-ray diffraction studies confirmed that two "MCl(CO)" fragments are introduced into both axial sites of the Mo2 core in 1 and coordinated by two PPh2 groups in a trans fashion, thereby forming a square-planar geometry around each M(I) metal. Treatment of 2 and 3 with an excess amount of tBuNC and XylNC induced dissociation of the carbonyl and chloride ligands to yield the corresponding dicationic complexes [Mo2M2(pyphos)4(tBuNC)4](Cl)2 (5a, M = Ir; 6a, M = Rh) and [Mo2M2(pyphos)4(XylNC)4](Cl)2 (7, M = Ir; 8, M = Rh). Their molecular structures were characterized by spectroscopic data as well as X-ray diffraction studies of BPh4 derivatives [Mo2M2(pyphos)4(tBuNC)4](BPh4)2 (5b, M = Ir; 6c, M = Rh), which confirmed that there is no direct sigma-bonding interaction between the M(I) atom and the Mo2 core. The M(I) atom in 5 and 6 can be oxidized by either 2 equiv of [Cp2Fe][PF6] or an equimolar amount of I2 to afford Mo(II)2M(II)2 complexes, [Mo2M2(X)2(tBuNC)4(pyphos)4]2+ in which two Mo-M(II) single bonds are formed and the bond order of the Mo-Mo moiety has been decreased to three. The Ir(I) complex 5a reacted not only with methyl iodide but also with dichloromethane to afford the 1,4-oxidative addition products [Mo2Ir2(CH3)(I)(tBuNC)4(pyphos)4](Cl)2 (13) and [Mo2Ir2(CH2Cl)(Cl)(tBuNC)4(pyphos)4](Cl)2 (15), respectively, although the corresponding reactions using the Rh(I) analogue 6 did not proceed. Kinetic analysis of the reaction with CH3I suggested that the 1,4-oxidative addition to the Ir(I) complex occurs in an SN2 reaction mechanism.     

Stepwise and one-pot syntheses of Ir(III) complexes with imidazolium-based carbene ligands

We report the preparation, crystal structure, electrochemistry, and emission properties of Ir(Cinsertion markC:)3, where Cinsertion markC: is an N-heterocyclic carbene ligand. Two synthetic approaches are introduced for generating Ir(III) complexes bearing imidazolium-based carbene ligands whose precursors are [pypiH2][Cl] (1a) (pyridyl[1,2-a]{2-phenylimidazol}-3-ylidene chloride) and [pympiH2][Cl] (1b) (pyridyl[1,2-a-{2-(p-methoxy)phenylimidazol}-3-ylidene chloride). The first method is a stepwise reaction: treatment of [Ir(mu-Cl)(COD)]2, where COD is 1,5-cyclooctadiene, with 4 equiv. of the corresponding carbene (Cinsertion markC:) ligands in the presence of an excess amount of sodium methoxide affords Ir(III) dimers [Ir(mu-Cl)(Cinsertion markC:)2]2 (2a, Cinsertion markC: = pypi(-); 2b, Cinsertion markC: = pympi(-)). These chloro-bridged dimers 2a and 2b react with the corresponding carbene (Cinsertion markC:) ligands to form the desired homoleptic compounds Ir(Cinsertion markC:)3 (3a, Cinsertion markC: = pypi(-); 3b, Cinsertion markC: = pympi(-)). The second method, using a one-pot reaction of [Ir(mu-Cl)(COD)]2 with 6 equiv. of the corresponding carbene (Cinsertion markC:) ligands 1a and 1b in the presence of excess amounts of Ag2O, affords Ir(Cinsertion markC:)3. The two methods are convenient and reproducible procedures for the synthesis of Ir(Cinsertion markC:)3. Complexes 3a and 3b are obtained as mixtures of meridional and facial isomers, which can be separated by recrystallization or flash column chromatography.     

Synthesis, chemistry and structures of complexes of the dioxovanadium(V) halides VO2F and VO2Cl

[VO2F(L-L)] (L-L = 2,2'-bipyridyl, 1,10-phenanthroline, Me2N(CH2)2NMe2) and [VO2F(py)2] (py = pyridine) have been prepared from the corresponding [VOF3(L-L)] or [VOF3(py)2] and O(SiMe3)2 in MeCN solution. VO2F (itself made from VOF3 and O(SiMe3)2 in MeCN) forms [Me4N][VO2F2] with [Me4N]F, but does not react with neutral N- or O-donor ligands. VO2Cl, prepared from VOCl3 and ozone, reacts with 2,2'-bipyridyl or 1,10-phenanthroline to form [VO2Cl(L-L)], with pyridine or pyridine-N-oxide (L) to produce [VO2Cl(L)2], and with OPPh3 or OAsPh3 (L') gives [VO2Cl(L')]. A second product from the OPPh3 system is the ionic [VO2(OPPh3)3][VO2Cl2] containing a trigonal bipyramidal cation. Neither VO2F nor VO2Cl form isolable complexes with MeCN, thf or MeO(CH2)2OMe, and both are reduced by P-, As-, S- or Se-donor ligands. [Ph4As][VO2X2] (X = F or Cl) react with 2,2'-bipyridyl to form [VO2X(2,2'-bipyridyl)], but similar reactions with weaker O-donor ligands fail. The complexes have been characterised by IR, multinuclear NMR (1H, 19F, 51V or 31P) and UV-visible spectroscopy. X-ray crystal structures are reported for [VO2F(py)2], [VO2Cl(L)2] (L = py or pyNO) and [VO2(OPPh3)3][VO2Cl2].     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

Halfsandwich Complexes Containing the Tetrathiotungstate Chelate Ligand. Crystal and Molecular Structure of Cp*Rh(PMe3)[(μ‐S)2WS2] (Cp* = η5‐Pentamethylcyclopentadienyl)

The reactions of Cp*M(PMe₃)Cl₂ (M = Rh ( 1a ), Ir ( 1b )) with (NEt₄)₂[WS₄] led to the heterodimetallic sulfido‐bridged complexes Cp*M(PMe₃)[(μ‐S)₂WS₂] (M = Rh ( 2a ), Ir ( 2b )), whereas the dimers [Cp*MCl(μ‐Cl)]₂ (M = Rh ( 4a ), Ir ( 4b )) reacted with (NEt₄)₂[WS₄) to give the known trinuclear compounds [Cp*M(Cl)]₂(μ‐WS₄) (M = Rh ( 5a ), Ir ( 5b )). Hydrolysis of the terminal W=S bonds converts 2a, b into Cp*M(PMe₃)[(μ‐S)₂WO₂] (M = Rh ( 3a ), Ir ( 3b )). Salts of a heterodimetallic anion, A[CpMo(I)(NO)(WS₄)] ( 6 ) (A⁺ = NEt₄⁺, NPh₄⁺) were obtained by reactions of [CpMo(NO)I₂]₂ with tetrathiotungstates, A₂[WS₄]. The complexes were characterized by IR and NMR (¹H, ¹³C, ³¹P) spectroscopy, and the X‐ray crystallographic structure of Cp*Rh(PMe₃)[(μ‐S)₂WS₂] ( 2a ) has been determined. The bond lengths and angles in the coordinations spheres of Rh and W in 2a (Rh···W 288.5(1) pm) are compared with related complexes containing terminal [WS₄^2—] chelate ligands.     

Syntheses and structures of mono-, di- and tetranuclear rhodium or iridium complexes of thiacalix[4]arene derivatives

The reactions of [Cp*MCl2]2(Cp*=eta5-C5Me5, M = Rh, Ir) with thiacalix[4]arene (TC4A(OH)4) and tetramercaptothiacalix[4]arene (TC4A(SH)4) gave the mononuclear complexes [(Cp*M){eta3-TC4A(OH)2(O)2}] and the dinuclear complexes [(Cp*M)2{eta3eta3-TC4A(S)4}] respectively, while the analogous reactions with dimercaptothiacalix[4]arene (TC4A(OH)2(SH)2) produced the tetranuclear complexes [(Cp*M)2(Cp*MCl2)2-{eta3eta3eta1eta1-TC4A(O)2(S)2}].     

Synthesis, structure, and reactivity of rhodium and iridium complexes of the chelating bis-sulfoxide tBuSOC2H4SOtBu. Selective O-H activation of 2-hydroxy-isopropyl-pyridine

The chloro-bridged rhodium and iridium complexes [M2(BTSE)2Cl2] (M = Rh 1, Ir 2) bearing the chelating bis-sulfoxide tBuSOC2H4SOtBu (BTSE) were prepared by the reaction of [M2(COE)4Cl2] (M = Rh, Ir; COE = cyclooctene) with an excess of a racemic mixture of the ligand. The cationic compounds [M(BTSE)2][PF6] (M = Rh 3, Ir 4), bearing one S- and one O-bonded sulfoxide, were also obtained in good yields. The chloro-bridges in 2 can be cleaved with 2-methyl-6-pyridinemethanol and 2-aminomethyl pyridine, resulting in the iridium(I) complexes [Ir(BTSE)(Py)(Cl)] (Py = 2-methyl-6-pyridinemethanol 5, 2-aminomethyl-pyridine 6). In case of the bulky 2-hydroxy- isopropyl-pyridine, selective OH oxidative addition took place, forming the Ir(III)-hydride [Ir(BTSE)(2-isopropoxy-pyridine)(H)(Cl)] 7, with no competition from the six properly oriented C-H bonds. The cationic rhodium(I) and iridium(I) compounds [M(BTSE)(2-aminomethyl-pyridine)][X] (M = Rh 8, Ir 10), [Rh(BTSE)(2-hydroxy- isopropyl-pyridine)][X] 9(stabilized by intramolecular hydrogen bonding), [Ir(BTSE)(pyridine)2][PF6] 12, [Ir(BTSE)(alpha-picoline)2][PF6] 13, and [Rh(BTSE)(1,10-phenanthroline)][PF6] 14 were prepared either by chloride abstraction from the dimeric precursors or by replacement of the labile oxygen bonded sulfoxide in 3 or 4. Complex 14 exhibits a dimeric structure in the solid state by pi-pi stacking of the phenanthroline ligands.     

Various forms of linear dipyridyls in discrete rectangles, dinuclear rods, and one-dimensional networks containing (eta5-pentamethylcyclopentadienyl)rhodium(III)

[Cp*Rh(eta1-NO3)(eta2-NO3)] (1) reacted with pyrazine (pyz) to give a dinuclear complex [Cp*Rh(eta1-NO3)(mu-pyz)(0.5)]2.CH2Cl2(3.CH2Cl2). Tetranuclear rectangles of the type [Cp*Rh(eta1,mu-X)(mu-L)(0.5)]4(OTf)4(4a: X = N3, L = bpy; 4b: X = N3, L = bpe; 4c: X = NCO, L = bpy) were prepared from [Cp*Rh(H2O)3](OTf)2 (2), a pseudo-halide (Me3SiN3 or Me3SiNCO), and a linear dipyridyl [4,4'-bipyridine (bpy) or trans-1,2-bis(4-pyridyl)ethylene (bpe)] by self-assembly through one-pot synthesis at room temperature. Treating complex with NH4SCN and dipyridyl led to the formation of dinuclear rods, [Cp*Rh(eta1-SCN)3]2(LH2) (5a: L = bpy; 5b: L = bpe), in which two Cp*Rh(eta1-SCN)3 units are connected by the diprotonated dipyridyl (LH2(2+)) through N(+)-H...N hydrogen bonds. Reactions of complex 2 with 1-(trimethylsilyl)imidazole (TMSIm) and dipyridyl (bpy or bpe) also produced another family of dinuclear rods [Cp*Rh(ImH)3]2.L (6a: L = bpy; 6b: L = bpe). Treating 1 and 2 with TMSIm and NH4SCN (in the absence of dipyridyl) generated a 1-D chain [Cp*Rh(ImH)3](NO3)2 (7) and a 1-D helix [Cp*Rh(eta1-SCN)2(eta1-SHCN)].H2O (8.H2O), respectively. The structures of complexes 3.CH2Cl2, 4a.H2O, 4c.2H2O, 5b, 6a, 7 and 8.H2O were determined by X-ray diffraction.     

Synthesis and properties of compressed dihydride complexes of iridium: theoretical and spectroscopic investigations

Reaction of [Cp*Ir(P-P)Cl][B(C6F5)4] (P-P = bisdimethydiphosphinomethane (dmpm), bisdiphenyldiphosphinomethane (dppm)) with [Et3Si][B(C6F5)4] in methylene chloride under 1 atm of hydrogen gas affords the dicationic compressed dihydride complexes [Cp*Ir(P-P)H2][B(C6F5)4]2. These dicationic complexes are highly acidic and are very readily deprotonated to the corresponding monohydride cations. When the preparative reaction is carried out under HD gas, the hydride resonance exhibits JHD = 7-9 Hz, depending upon the temperature of observation, with higher values of JHD observed at higher temperatures. A thermally labile rhodium analogue, [CpRh(dmpm)(H2)][B(C6F5)4]2, was prepared similarly. A sample prepared with HD gas gave JHD = 31 Hz and J(HRh) = 31 Hz, allowing the Rh complex to be identified as a dihydrogen complex. Quantum dynamics calculations on a density functional theory (DFT) potential energy surface have been used to explore the structure of the Ir complexes, with particular emphasis on the nature of the potential energy surface governing the interaction between the two hydride ligands and the Ir center.     

Unusual reactivity of tris(pyrazolyl)borate zirconium benzyl complexes

The synthesis and reactivity of [Tp*Zr(CH2Ph)2][B(C6F5)4] (2, Tp* = HB(3,5-Me2pz)3, pz = pyrazolyl) have been explored to probe the possible role of Tp'MR2+ species in group 4 metal Tp'MCl3/MAO olefin polymerization catalysts (Tp' = generic tris(pyrazolyl)borate). The reaction of Tp*Zr(CH2Ph)3 (1) with [Ph3C][B(C6F5)4] in CD2Cl2 at -60 degrees C yields 2. 2 rearranges rapidly to [{(PhCH2)(H)B(mu-Me2pz)2}Zr(eta2-Me2pz)(CH2Ph)][B(C6F5)4] (3) at 0 degrees C. Both 2 and 3 are highly active for ethylene polymerization and alkyne insertion. Reaction of 2 with excess 2-butyne yields the double insertion product [Tp*Zr(CH2Ph)(CMe=CMeCMe=CMeCH2Ph)][B(C6F5)4] (4). Reaction of 3 with excess 2-butyne yields [{(PhCH2)(H)B(mu-Me2pz)2}Zr(Cp*)(eta2-Me2pz)][B(C6F5)4] (6, Cp* = C5Me5) via three successive 2-butyne insertions, intramolecular insertion, chain walking, and beta-Cp* elimination.     

Substituted N-picolylethylenediamines of the type (ArNHCH2CH2){(2-C5H4N)CH2}NR [R = Me, 4-CH2=CH(C6H4)CH2, (2-C5H4N)CH2] and their transition metal(II) halide complexes

Alkylation of (ArNHCH2CH2){(2-C5H4N)CH2}NH with RX [RX = MeI, 4-CH2=CH(C6H4)CH2Cl) and (2-C5H5N)CH2Cl] in the presence of base has allowed access to the sterically demanding multidentate nitrogen donor ligands, {(2,4,6-Me3C6H2)NHCH2CH2}{(2-C5H4N)CH2}NMe (L1), {(2,6-Me3C6H3)NHCH2CH2}{(2-C5H4N)CH2}NCH2(C6H4)-4-CH=CH2 (L2) and (ArNHCH2CH2){(2-C5H4N)CH2}2N (Ar = 2,4-Me2C6H3 L3a, 2,6-Me2C6H3 L3b) in moderate yield. L3 can also be prepared in higher yield by the reaction of (NH2CH2CH2){(2-C5H4N)CH2}2N with the corresponding aryl bromide in the presence of base and a palladium(0) catalyst. Treatment of L1 or L2 with MCl2 [MCl2 = CoCl2.6H2O or FeCl2(THF)1.5] in THF affords the high spin complexes [(L1)MCl2](M = Co 1a, Fe 1b) and [(L2)MCl2](M = Co 2a, Fe 2b) in good yield, respectively; the molecular structure of reveals a five-coordinate metal centre with bound in a facial fashion. The six-coordinate complexes, [(L3a)MCl2](M = Co 3a, Fe 3b, Mn 3c) are accessible on treatment of tripodal L3a with MCl2. In contrast, the reaction with the more sterically encumbered leads to the pseudo-five-coordinate species [(L3b)MCl2](M = Co 4a, Fe 4b) and, in the case of manganese, dimeric [(L3b)MnCl(mu-Cl)]2 (4c); in 4a and 4b the aryl-substituted amine arm forms a partial interaction with the metal centre while in 4c the arm is pendant. The single crystal X-ray structures of , 1a, 3b.MeCN, 3c.MeCN, 4b.MeCN and 4c are described as are the solution state properties of 3b and 4b.