Excess molar enthalpies for binary mixtures of different amines with water

The isothermal excess molar enthalpies for binary mixtures of different amines with water were measured with a C-80 Setaram calorimeter. The experimental results indicate that the excess molar enthalpy is related to the molecular structure. The experimental excess molar enthalpies were satisfactorily fitted with the Redlich–Kister equation. They were also used to test the suitability of the NRTL model, and the deviations are a little larger than the R–K equation.     

Excess enthalpies of water+1,4-dioxane at 278.15, 298.15, 318.15 and 338.15 K

The excess molar enthalpies of (1–x)water+x1,4-dioxane have been measured at four different temperatures. All the mixtures showed negative enthalpies in the range of low mole fraction but positive ones in the range of high mole fraction of 1,4-dioxane. Excess enthalpies were increased with increasing temperature except those of at 278.15 K. Partial molar enthalpies have maximum around x=0.13 and minimum around x=0.75. Three different behaviors for the concentration dependence of partial molar enthalpies were observed for all temperature. Theoretical calculations of molecular interactions of three characteristic concentrations were carried out using the molecular orbital method.     

Excess enthalpies of ethylbenzene + alkane systems at 25°C. An interpretation in terms of the Prigogine-Flory-Patterson model

The molar excess enthalpies for the ethylbenzene + n-decane and ethylbenzene + n-tetradecane systems have been measured at 25°C over the complete concentration range. These results and others from the literature for alkanes + ethylbenzene, and alkanes + toluene have been discussed in terms of the Prigogine-Flory-Patterson theory.     

Excess molar enthalpies of binary mixtures containing dimethylcarbonate, diethylcarbonate or propylene carbonate + three chloroalkenes at 298.15 K

Excess molar enthalpies H^E_m of dimethylcarbonate, diethylcarbonate or propylene carbonate + trans-1,2-dichloroethylene, + trichloroethylene, and + tetrachloroethylene, respectively have been determined at 298.15 K using an LKB flow-microcalorimeter. Experimental data have been correlated by means of the Redlich-Kister equation and adjustable parameters have been evaluated by least-squares analysis. The H^E_m values range from a minimum value of − 1000 J mol⁻¹ for diethylcarbonate + trans-1,2-dichloroethylene up to a maximum of 920 J mol⁻¹ for dimethylcarbonate + tetrachloroethylene. For each series of mixtures, a systematic increase in H^E_m with an increase in the number of Cl atoms in the chloroalkene molecule has been noted. The results are discussed in terms of the molecular interactions.     

Excess enthalpies and excess heat capacities of the binary mixtures of acetonitrile,dimethylformamide, and benzene at 298.15 K

Excess enthalpies and excess isobaric heat capacities of binary mixtures consisting of acetonitrile, dimethylformamide and benzene were measured at 298.15 K. Excess enthalpy of acetonitrile + benzene is positive and that of acetonitrile + dimethylformamide is negative. That of dimethylformamide + benzene is positive and nearly equals to zero as shown in the previous report [1]. Excess heat capacities of acetonitrile + benzene and benzene + dimethylformamide change sign from negative to positive with increase of benzene. That of acetonitrile + dimethylformamide is not simple. It is slightly positive near both ends of mole fraction and not so large negative in the middle of mole fraction. The curve tends to flatten in that region.

---

Zusammenfassung An binären Gemischen aus Acetonitril, Dimethylformamid und Benzol wurden bei 298.15 K die Überschußenthalpien und die isobaren Überschußwärmekapazitäten gemessen. Die Überschußenthalpie von Acetonitril + Benzol ist positiv, die von Acetonitril + Dimethylformamid ist negativ. Die Überschußenthalpie ist bei Dimethylformamid positiv und wie bereits berichtet [1] annähernd Null. Die Überschußwärmekapazität von Acetonitril + Benzol und Benzol + Dimethylformamid wechselt bei Zunahme von Benzol das Vorzeichen von negativ zu positiv. Die von Acetonitril + Dimethylformamid ist nicht einfach. An beiden Enden der Molenbruchskaie ist sie leicht positiv und nicht allzu negativ in der Mitte der Molenbruchskale. Die Kurve flacht in dieser Region ab.

     

Excess enthalpies of cycloether + methyl methylthiomethyl sulfoxide or dimethyl sulfoxide at 298.15 K

Excess enthalpies of ten binary mixtures of each of methyl methylthiomethyl sulfoxide (MMTSO) and dimethyl sulfoxide (DMSO) with one of the cycloethers (oxane, 1,3- and 1,4-dioxanes, oxolane and 1,3-dioxolane) have been determined at 298.15 K. All the mixtures show positive excess enthalpies over the whole composition range. Excess enthalpies of the cycloether + MMTSO or DMSO decrease with increasing number of oxygen atoms in the cycloether molecules, except for oxolane + MMTSO. Excess enthalpies of MMTSO + cycloethers are smaller than those of DMSO + cycloethers for the same cycloether except for the 1,3-dioxolane mixtures.

---

Zusammenfassung Bei 298.15 K wurden die Überschußenthalpien von zehn binären Gemischen aus jeweils Methylmethylthiomethylsulfoxid (MMTSO) bzw. Dimethylsulfoxid (DMSO) mit einem der cyclischen Ether (Oxan, 1,3- und 1,4-Dioxan, Oxolan und 1,3-Dioxolan) bestimmt. Alle Gemische zeigen im gesamten Konzentrationsbereich eine positive Überschußenthalpie. Die Überschußenthalpien von Cycloether + MMTSO oder DMSO sinken mit zunehmender Anzahl der Sauerstoffatome im cyclischen Ether, mit Ausnahme von Oxolan + MMTSO. Die Überschußenthalpien für MMTSO + Cycloether sind kleiner als die für DMSO + entsprechender Cycloether, eine Ausnahme bilden die Gemische mit 1,3-Dioxolan.

     

Excess enthalpies of mixtures containing n-heptane,methanol and methyl tert-butyl ether (MTBE)

Molar excess enthalpies H ^E have been measured for the binary mixtures MTBE+methanol, MTBE+n-heptane and methanol+n-heptane using a quasi-isothermal flow calorimeter. The measurements have been performed at atmospheric pressure and at 25 and 40°C for all the mixtures and for MTBE+methanol also at 50°C. The experimental results for MTBE methanol and MTBE+n-heptane are compared with those calculated using the NRTL equation.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990     

Excess molar enthalpies of the ternary system MTBE+ethanol+octane

Excess molar enthalpies of the ternary mixture {x ₁ tert-butyl methyl ether (MTBE)+x ₂ ethanol+(1–x ₁–x ₂) octane} and the involved binary mixture {x ethanol+(1–x) octane} have been measured at 298.15 K and atmospheric pressure, over the whole composition range, using a Calvet microcalorimeter. The results were fitted by means of different variable degree polynomials.     

Excess molar enthalpies of the ternary system mtbe+ethanol+hexane

Excess molar enthalpies of the ternary mixture {x₁ tert-butyl methyl ether (MTBE)+x₂ ethanol+(1–x₁–x₂) hexane} and, the involved binary mixtures {x tert-butyl methyl ether (MTBE)+(1–x) ethanol}, {x tert-butyl methyl ether (MTBE)+(1–x) hexane} and {x ethanol+( 1–x) hexane} have been measured at 298.15 K and atmospheric pressure, over the whole composition range, using a Calvet microcalorimeter. The results were fitted by means of different variable degree polynomials.     

Excess enthalpies for mixtures of cyclohexanone with isomeric propanols and butanols at 298.15 K

Excess enthalpies (H ^E ) for mixtures of cyclohexanone with propan-1-ol. propan-2-ol, butan-1-ol, butan-2-ol and 2-methyl propan-1-ol at 298.15 K have been measured over the entire composition range. All mixed endothermically with the maximum values ofH ^E occurring at equimole fraction. Comments about the molecular interactions contributing to the excess enthalpies of a cyclic ketone + an alcohol are made on the basis of these results.     

Excess enthalpies of decahydronaphthalene in cycloalkanes and inn-Alkanes at two temperatures

The H _m ^E of decahydronaphthalene in cyclopentane, cyclohexane, cycloheptane, cyclooctane, n-hexane, n-heptane, n-octane, n-dodecane and in n-hexadecane have been measured over the whole composition range at two temperatures. These results together with previously reported V _m ^E results for the same systems have been fitted to the Flory theory of liquid mixtures.     

Excess Enthalpies of (2,2,4-Trimethylpentane or Cyclohexane) + Methyl tert-Butyl Ether + tert-Amyl Methyl Ether at 25°C

Microcalormetric measurements of excess molar enthalpies at 25°C are reported for two ternary mixtures 2,2,4-trimethylpentane + methyltert-butyl ether +tert-amyl methyl ether and cyclohexane + methyltert-butyl ether +tert-amyl methyl ether. Smooth representations of the results are presented and used to construct constant-enthalpy contours on Roozeboom diagrams. Comparisons of the experimental results with estimates based on the Flory theory of mixtures are also described.     

Excess molar enthalpies at 298.15 k of the binary mixtures

We have determined the excess molar enthalpies H _m ^E at 298.15 K and normal atmospheric pressure for the binary mixtures containing tert-butyl methyl ether (MTBE)+(methanol, ethanol, 1-propanol, 1-pentanol) using a Calvet microcalorimeter. This revised version was published online in July 2006 with corrections to the Cover Date.     

Excess enthalpy of ternary mixture for diamine+heptane+cyclohexan

The excess molar enthalpy of ternary mixture for 3-diethylaminopropylamine+heptane+cyclohexane were measured using a Calvet microcalorimeter at 303.15 K. Empirical equations, Redlich-Kister, Tsao-Smith, and Kohler and group contribution models, UNIFAC (modified version) and DISQUAC have been applied. A reasonable representation of ternary data is obtained. This revised version was published online in August 2006 with corrections to the Cover Date.     

Excess volume of mixing and excess enthalpies of mixing of ethyl iodide + aromatic hydrocarbons at 25°C

The excess volumes and enthalpies of mixing of binary mixtures of ethyl iodide with benzene, toluene, o-xylene, m-xylene and p-xylene have been measured experimentally over the whole composition range at 25°C. Qualitatively the data have been explained on the basis of electron donoracceptor interactions between the ethyl iodide and aromatic hydrocarbons and also on the loss of favorable orientational order of the pure components. Flory's theory correctly predicts the sign and to some extent magnitude of the V _E and H ^E values.     

Correlation of the Prigogine-Flory theory with isothermal compressibility and excess enthalpy data for cyclohexane + alkane mixtures

The Prigogine-Flory theory is applied to isothermal compressibilities, at 25, 35, 45 and 60°C and to heats of mixing at 25°C for cyclohexane + n-alkane systems. To this purpose, the van der Waals and the Lennard-Jones potentials have been adopted. The energy parameter ₁₂ has been calculated from the experimental data, and its dependence on the n-alkane number of carbons has been studied. Taking the ₁₂ value obtained for the equimolecular mixture, the excess functi¹/ns (V^E/P)_T, H^E and V^E have been calculated and the results compared with experimental values.     

Thermodynamic excess properties of alkanol + amine mixtures and application of the ERAS model

New experimental data of the molar excess volume V ^E of the mixtures ethanol/n-butylamine, heptanol/n-butylamine, n-propanol/dibutylamine have been obtained using the technique of the vibrating tube densitometer. Together with the data for the molar excess enthalpy H ^E from the literature, the V ^E data have been used for testing the applicability of the socalled ERAS model which accounts for hydrogen bonding effects as well as for free volume effects in associating mixtures. The results obtained by adjusting the model parameters reveal a strong cross association between the unlike molecules in the mixture resulting from strong negative values for the hydrogen bonding energy and the hydrogen bonding volume.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.