Homolysis of weak Ti-O bonds: experimental and theoretical studies of titanium oxygen bonds derived from stable nitroxyl radicals

Titanium-oxygen bonds derived from stable nitroxyl radicals are remarkably weak and can be homolyzed at 60 degrees C. The strength of these bonds depends sensitively on the ancillary ligation at titanium. Direct measurements of the rate of Ti-O bond homolysis in Ti-TEMPO complexes Cp2TiCl(TEMPO) (3) and Cp2TiCl(4-MeO-TEMPO) (4) (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl, 4-MeO-TEMPO = 2,2,6,6-tetramethyl-4-methoxypiperidine-N-oxyl) were conducted by nitroxyl radical exchange experiments. Eyring plots gave the activation parameters, deltaH++ = 27(+/- 1) kcal/mol, deltaS++ = 6.9(+/- 2.3) eu for 3 and deltaH++ = 28(+/- 1) kcal/mol, deltaS++ = 9.0(+/- 3.0) eu for 4, consistent with a process involving the homolysis of a weak Ti-O bond to generate the transient Cp2Ti(III)Cl and the nitroxyl radical. Thermolysis of the titanocene TEMPO complexes in the presence of epoxides leads to the Cp2Ti(III)Cl-mediated ring-opening of the epoxide followed by trapping by the nitroxyl radical. The X-ray crystal structure of the Ti-TEMPO derivative, Cp2TiCl(4-MeO-TEMPO) (4), is reported. DFT (B3LYP/6-31G*) calculations and experimental studies reveal that the strength of the Ti-O bond decreases dramatically with the number of cyclopentadienyl groups on titanium. The calculated Ti-O bond strength of the monocyclopentadienyl complex 2 is 43 kcal/mol, whereas that of the biscyclopentadienyl complex 3 is 17 kcal/mol, a difference of 26 kcal/mol. These studies reveal that the strength of these Ti-O bonds can be tuned over an interesting and experimentally accessible temperature range by appropriate ligation on titanium.     

Metal and ligand K-edge XAS of titanium-TEMPO complexes: determination of oxidation states and insights into Ti-O bond homolysis

Ti-TEMPO (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) provides a means for generating Ti(III) complexes by homolysis of the Ti-O bond. It has been determined that bis-Cp-Ti-TEMPO complexes readily undergo homolytic cleavage while the mono-Cp-Ti-TEMPO complexes do not. Here Ti K- and Cl K-edge XAS are applied to directly determine the oxidation state of TiCl3TEMPO, TiCpCl2TEMPO, and TiCp2ClTEMPO, with reference to Ti(III) and Ti(IV) complexes of known oxidation state. The Ti K-edge data show that Ti(III) complexes exhibit a pre-edge feature approximately 1 eV lower than any of the Ti(IV) complexes; while the Cl K-edges show that Ti(III) complexes have a Cl K- pre-edge feature to approximately 1 eV higher energy than any of the Ti(IV) complexes. Taken together, the Ti and Cl K-edge data indicate that the Ti-TEMPO complexes are best described as Ti(IV)-TEMPO anions (rather than Ti(III)-nitroxyl radicals). In addition, the Cl K-edges indicate that replacement of Cl by Cp weakens the bonding with the remaining ligands, with the Cl 3p covalency decreasing from 25% to 21% to 17% on going from TiCl3TEMPO to TiCpCl2TEMPO to TiCp2ClTEMPO. DFT calculations also show that the electronic structures of the Ti-TEMPO complexes are modulated by the replacement of chloride by Cp. The effect of the Cp on the ancillary ligation is one factor that contributes to facile Ti-O bond homolysis in TiCp2ClTEMPO. However, the results indicate the primary contribution to the energetics of Ti-O bond homolysis in TiCp2ClTEMPO is stabilization of the three-coordinate product by Cp.     

Syntheses and characterization of titanium(IV) and titanium(III) complexes with (2-dimethylphosphino)ethane-1-thiolate and (3-dimethylphosphino)propane-1-thiolate as ligands

Reactions of Cp(2)TiCl(2) (Cp = eta(5)-cyclopentadienide) with 2 or 1 equiv of hybrid P-S ligands (L), (CH(3))(2)P(CH(2))(n)()S(-) (n = 2, dmpet; n = 3, dmppt), produced new dicyclopentadienyltitanium(IV) complexes with L, Cp(2)Ti(L-kappaS)(2) (1, L = dmpet; 2, L = dmppt) and [Cp(2)Ti(L-kappa(2)S,P)]BPh(4) (3, L = dmpet; 4, L = dmppt). The Ti(III) complexes, Cp(2)Ti(L-kappa(2)S,P) (5, L = dmpet; 6, L = dmppt), were prepared by the reaction of Cp(2)Ti(eta(3)-C(3)H(5)) with 1 equiv of L. The structures of complexes 1-6 were confirmed by X-ray diffraction analyses. It was found that complexes 3 and 5 were isostructural around Ti(IV) and Ti(III) centers: the Ti(IV)-S bond length in 3 (2.3498(9) A) is shorter by 0.14 A than Ti(III)-S in 5 (2.4877(7) A), while Ti(IV)-P (2.534(1) A) was merely 0.05 A shorter than Ti(III)-P (2.5844(7) A). The redox potential between 3 and 5 in acetonitrile was -1.14 V vs the ferricinium/ferrocene couple. A heterobimetallic complex that has the frame of complex 1, [Cp(2)Ti(dmpet)(2)Cu]PF(6) (7), was also isolated and structurally characterized: the Ti-Cu distance (2.95(1) A) was shorter than that in [Cp(2)Ti(SC(2)H(4)PPh(2))(2)Cu]BF(4), previously reported by White and Stephan. Structural characterization was also carried out for CpTi(dmpet-kappaS)(2)(dmpet-kappa(2)S,P) (8) and CpTiCl(2)(dmppt-kappa(2)S,P) (9), which were obtained by the reactions of Cp(or Cp)TiCl(3) (Cp = eta(5)-C(5)Me(5)(-)) with n equiv (n = 1-3) of L. The mutual site-exchange reaction between phosphorus atoms on a coordinated dmpet in the kappa(2)S,P mode and on two other coordinated dmpet's in the kappaS mode within complex 8 was analyzed by the variable-temperature (31)P[(1)H] dynamic NMR method. The kinetic parameters for this process, k(ex)(298) = 1.9 x 10(5) s(-)(1), DeltaH = 48 kJ mol(-)(1), and DeltaS = 17 J mol(-)(1) K(-)(1), as well as the rather long Ti(IV)-P distance (2.652(1) A), indicate the fluxional nature of the coordination geometry in complex 8.     

Stereoselective oxidative additions of iodoalkanes and activated alkynes to a sulfido-bridged heterotrinuclear early-late (TiIr2) complex

The reactions of the early-late trinuclear complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(CO)(4)] (1) with electrophiles have been found to occur on the iridium atoms with no other involvement of the early metal than in electronic effects. The reaction with iodine gave two isomers of the diiridium(II) complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)I(2)(CO)(4)] differentiated by the relative positions of the iodo ligands on the iridium atoms. The reactions with iodoalkanes are highly stereoselective to give one sole isomer of formula [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(R)(I)(CO)(4)] (R = CH(3), CH(2)I, CHI(2)) with a carbonyl and the iodo ligand trans to the metal-metal bond. The structures of the symmetrical isomer with the iodo ligands trans to the metal-metal bond and that of the compound with R = CHI(2) have been solved by X-ray diffraction methods. The stereoselectivity of the oxidative-addition reactions can be rationalized assuming the influence of steric effects of the groups on the titanium center and a radical-like mechanism. Reactions of 1 with the activated acetylenes, dimethylacetylenedicarboxylate and methylacetylenecarboxylate, gave the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)] (R = CO(2)Me, H), with the alkyne bridging the two iridium centers as a cis-dimetalated olefin and the C=C bond parallel to the Ir-Ir axis. Two isomers resulting from the disposition of the alkyne along the Ir-Ir vector were observed in solution for the compound with the nonsymmetrical alkyne (R = H), while only one was observed for the compound with R = CO(2)Me. An exchange, fast in the NMR time scale, of the apical with the equatorial carbonyls occured in the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)], producing their equivalence in the (13)C((1)H) NMR spectra.     

Early transition-metal perfluoroalkyl complexes

Elusive early transition-metal perfluoroalkyl complexes have been isolated and structurally characterized for the first time. Trifluoromethyltrimethylsilane, CF3SiMe3, serves as an excellent trifluoromethyl group-transfer reagent and reacts with the known Ti(IV) fluoride complex Cp2TiF2 to yield the novel Ti(IV) trifluoromethyl fluoride compound, Cp2Ti(CF3)(F) (1). Reaction of complex 1 with trimethylsilyltriflate (Me3SiOTf) affords the Ti(IV) trifluoromethyl triflate complex Cp2Ti(CF3)(OTf) (2). Both titanium perfluoroalkyl compounds have been characterized spectroscopically and by single-crystal X-ray analysis. The Ti-CF3 linkage in these complexes is remarkably robust and shows no evidence of an alpha-fluoride interaction (Ti...F-CF2) between the electrophilic Ti(IV) metal center and any of the C-F bonds in the trifluoromethyl group in the solid state or in solution.     

The elusive 16-electron Cp*M(NO)Me(2)(M = Mo, W) complexes and their spontaneous conversions to Cp*M(NMe)(O)Me isomers.

Treatment of [Cp*Mo(NO)Cl(mu-Cl)](2) with magnesium (Me(2)Mg.dioxane, MeMgCl) or aluminum (Me(3)Al) methylating reagents affords the known compound [Cp*Mo(NO)Me(mu-Cl)](2) (1). Similar treatment of the dichloro precursor with MeLi in ethereal solvents generates an equimolar mixture of 1 and the trimethyl "ate" complex, Cp*MoMe(3)(NO-Li(OEt(2)(n)), (2-Et(2)O). Reaction of 2-Et(2)O with a source of [Me](+) forms Cp*MoMe(3)(=N-OMe)(3), a rare terminal alkoxylimido complex. Metathesis of the chloro ligands of [Cp*Mo(NO)Cl(mu-Cl)](2) by MeLi in toluene at low temperatures produces the target dimethyl complex, Cp*Mo(NO)Me(2) (4), in 75% isolated yield. In solution, 4 is predominantly a monomeric species, whereas in the solid state it adopts a dimeric or oligomeric structure containing isonitrosyl bridges as indicated by IR and (15)N/(13)C NMR spectroscopies. Hydrolysis of 4 affords meso- and rac-[Cp*Mo(NO)Me](2)(mu-O) (5), and the reactions of 4 with a range of Lewis bases, L, to form the 18e adducts Cp*Mo(NO)(L)Me(2) (e.g., Cp*Mo(NO)(PMe(3))Me(2) (7)), have established it to be the most electrophilic complex of its family. Acidolysis of the methyl groups of 4 is also facile. Most notably, 4 is thermally unstable in solution and undergoes isomerization via nitrosyl N-O bond cleavage to its oxo(imido) form, Cp*Mo(NMe)(O)Me (11), which is isolable from the final reaction mixture as the mu-oxo-bridged adduct formed by 4 and 11, i.e., Cp*Mo(NO)Me(2)(mu-O)Cp*Mo(NMe)Me (4 <-- 11). The rate of this isomerization is significantly faster for the tungsten dimethyl complex; hence, Cp*W(NO)Me(2) (12) is not isolable free of a supporting donor interaction and can only be isolated as Cp*W(NO)Me(2)(mu-O)Cp*W(NMe)Me (12 <-- 13) or Cp*W(NO)Me(2)(PMe(3)) (14) adducts.     

Different C-C coupling reactions of permethyltitanocene and permethylzirconocene with disubstituted 1,3-butadiynes

Herein we describe different C-C coupling reactions of permethyltitanocene and -zirconocene with disubstituted 1,3-butadiynes. The outcomes of these reactions vary depending on the metals and the diyne substituents. The reduction of [Cp2*MCl2] (Cp* = C5Me5; M = Ti, Zr) with Mg in the presence of disubstituted butadiynes RC triple bond C-C triple bond CR' is suitable for the synthesis of different C-C coupling products of the diyne and the permethylmetallocenes, and provides a new method for the generation of functionalized pentamethyl-cyclopentadienyl derivatives. For M = Zr and R = R' = tBu, the reaction gives, by a twofold activation of one pentamethylcyclopentadienyl ligand, the complex [Cp*Zr[-C(=C=CHtBu)-CHtBu-CH2-eta5-C5Me3-CH2-]] (3), containing a fulvene ligand that is coupled to the modified substrate (allenic subunit). When using the analogous permethyltitanocene fragment "Cp2*Ti", the reaction depends strongly on the substituents R and R'. The coupling product of the butadiyne with two methyl groups of one of the pentamethylcyclopentadienyl ring systems, [Cp*Ti[eta5-C5Me3-(CH2-CHR-eta2-C2-CHR'-CH2)]], is obtained with R = R' = tBu (4) and R = tBu, R' = SiMe3 (5). In these complexes one pentamethylcyclopentadienyl ligand is annellated to an eight-membered ring with a C-C triple bond, which is coordinated to the titanium center. A different activation of both pentamethylcyclopentadienyl ligands is observed for R = R' = Me, resulting in the complex [[eta5-C5Me4(CH2)-]Ti[-C(=CHMe)-C(=CHMe)-CH2-eta5-C5Me4]] (6), which displays a fulvene as well as a butadienyl-substituted pentamethylcyclopentadienyl ligand. The influence exerted by the size of the metal is illustrated in the reaction of [Cp2*ZrCl2] with MeC triple bond C-C triple bond CMe. Here the five-membered metallacyclocumulene complex [Cp2*Zr(eta4-1,2,3,4-MeC4Me)] (7) is obtained. The reaction paths found for R = R' = Me are identical to those formerly described for R = R' = Ph.     

MASS SPECTRA OF BIS (CYCLOPENTADIENYL)-BIS (ORTHO-PHENYLAMINOBENZOATO) TITANIUM AND ITS DERIVATIVES

<正> Four complexes of the types of Cp2Ti (OOCC6H4NHPh-o)2 and Cp2TiCl2(Cp=Cp, MeCp= (CH3C5H4-)) have been investigated under the electron impact condition. The experimental results of Cp2Ti(OOCC6H4NHPh-o)2 complexes suggest that the Ti -L (L =OOCC6H4NHPh-o) bond is weaker than Ti -Cp bond and their molecular ions are characterized by the ready loss of L ligands. On the other hand, the molecular ions of Cp2TiCl2 are characterized by the loss of Cp ligands. The characteristic ions [M-HCl]+ and [M - 2HCl]+ are observed in the spectra of (MeCp)2TiCl2.     

A chelating beta-diketonate/phenoxide ligand and its coordination behavior toward titanium and scandium

Dibenzoylmethane derivatives with one (L1H2) or both (L2H3, L3H3) benzenes linked at their ortho positions to 4,6-di-tert-butylphenol moieties by two-carbon linkers have been synthesized. The mono-beta-diketone-monophenol ligand L1H2 is metalated by titanium alkoxides to form the homoleptic complex (L1)2Ti and heteroleptic complexes (L1)Ti([OCH2CH2]2NR) (R = H, CH3), and reacts with Cp3Sc to form CpSc(L1). These are the first examples of complexes of a beta-diketonate ligand which is further chelating to a single metal center. Crystallographic analysis of (L1)2Ti indicates that the 10-membered ring allows chelation of the phenoxide with little strain, and both fac and mer geometries are accessible in solution. Protonolysis of the second cyclopentadienyl ring of Cp3Sc appears to take place by an indirect, Cp3Sc-catalyzed pathway.     

Carbon monoxide-induced N-N bond cleavage of nitrous oxide that is competitive with oxygen atom transfer to carbon monoxide as mediated by a Mo(II)/Mo(IV) catalytic cycle

In the presence of CO, facile N-N bond cleavage of N(2)O occurs at the formal Mo(II) center within coordinatively unsaturated mononuclear species derived from Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](CO)(2) (Cp* = η(5)-C(5)Me(5)) (1) and {Cp*Mo[N((i)Pr)C(Me)N((i)Pr)]}(2)(μ-η(1):η(1)-N(2)) (9) under photolytic and dark conditions, respectively, to produce the nitrosyl, isocyanate complex Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](κ-N-NO)(κ-N-NCO) (7). Competitive N-O bond cleavage of N(2)O proceeds under the same conditions to yield the Mo(IV) terminal metal oxo complex Cp*Mo[N((i)Pr)C(Me)N((i)Pr)](O) (3), which can be recycled to produce more 7 through oxygen-atom-transfer oxidation of CO to produce CO(2).     

C(arenium)-C(alkyl) bond making and breaking: key process in the platinum-mediated C(aryl)-C(alkyl) bond formation. Analogies to organic electrophilic aromatic substitution

The reaction of cationic platinum aqua complexes 2 [Pt(C(6)H(2)[CH(2)NMe(2)](2)-E-4)(OH(2))](X') (X' = SO(3)CF(3), BF(4)) with alkyl halides RX gave various air-stable arenium complexes 3-5 containing a new C-C bond (R = Me, 3; Et, 4; Bn, 5). Electron-releasing oxo-substituents on the aromatic ligand (E = e.g., OH, b; OMe, c) enhance the reactivity of the aqua complex 2 and were essential for arenium formation from alkyl halides different from MeX. This process is initiated by oxidative addition of alkyl halides to the platinum(II) center of 2, which affords (alkyl)(aryl) platinum(IV) complexes (e.g., 9, alkyl = benzyl) as intermediates. Spectroscopic analyses provided direct evidence for a subsequent reversible 1,2-sigmatropic shift of the alkyl group along the Pt-C(aryl) bond, which is identical to repetitive C(arenium)-C(alkyl) bond making and breaking and concerted metal reduction and oxidation. Temperature-dependent NMR spectroscopy revealed DeltaH degrees = -1.3 (+/- 0.1) kJ mol(-1), DeltaS degrees = +3.8 (+/- 0.2) J mol(-1) K(-1), and DeltaG degrees (298) = -2.4 (+/- 0.1) kJ mol(-1) for the formation of the arenium complex 5b from 9 involving the migration of a benzyl group. The arenium complexes were transformed to cyclohexadiene-type addition products 7 or to demetalated alkyl-substituted arenes, 8, thus completing the platinum-mediated formation of a sp(2)-sp(3) C-C bond which is analogous to the aromatic substitution of a [PtX](+) unit by an alkyl cation R(+). The formation of related trimethylsilyl arenium complexes 6 suggests arenium complexes as key intermediates, not only in (metal-mediated) sp(2)-sp(3) C-C bond making and breaking but also in silyl-directed cyclometalation.     

Carbon-to-metal hydrogen atom transfer: direct observation using time-resolved infrared spectroscopy

We report the direct spectroscopic observation of hydrogen atom transfer reactions from carbon to metals, in which homolytic cleavage of a C-H bond is accomplished at a single metal center. Laser flash photolysis (355 nm) of a solution of [Cp(CO)2Os]2 leads to homolysis of the Os-Os bond and formation of the osmium-centered radical, Cp(CO)2Os*, as observed by time-resolved infrared (TRIR) spectroscopy. DFT computations on Cp(CO)2Os* support this assignment. Continuous photolysis (lambda > 300 nm) of [Cp(CO)2Os]2 in the presence of excess 1,4-cyclohexadiene produces the osmium hydride Cp(CO)2OsH. The kinetics of this carbon-to-metal hydrogen atom transfer were examined by TRIR spectroscopy. The second-order rate constant for hydrogen atom transfer from 1,4-cyclohexadiene to Cp(CO)2Os* in hexane at 23 degrees C is kH = (2.1 +/- 0.2) x 106 M-1 s-1. The pKa of Cp(CO)2OsH was determined as 32.7 in CH3CN, and use of a thermochemical cycle provided an estimated lower limit of 82 kcal/mol for the Os-H bond dissociation energy, indicating that it is an exceptionally strong M-H bond. Photolysis of [Tp(CO)2Os]2 (Tp = hydridotris(pyrazolyl)borate) results in carbon-to-metal hydrogen atom transfers from even stronger C-H bonds (THF or toluene) and produces Tp(CO)2OsH.     

Structure of the decamethyl titanocene cation,a metallocene with two agostic C-h bonds,and its interaction with fluorocarbons

The tetraphenylborate salt of the decamethyl titanocene cation, [Cp*2Ti][BPh4] (1, Cp* = C5Me5), was prepared by reaction of Cp*2TiH with [Cp2Fe][BPh4] and by reaction of Cp*2TiMe with [PhNMe2H][BPh4]. The crystal structure of 1 shows that the Cp*2Ti cation has a bent metallocene structure with agostic interactions with the metal center of two adjacent methyl groups on one of the Cp* ligands. Compound 1 reacts readily with THF to give the adduct [Cp*2Ti(THF)][BPh4] (2). In fluorobenzene, 1 forms the eta1-fluorobenzene adduct [Cp*2Ti(eta1-FC6H5)][BPh4] (3), which was structurally characterized. In contrast to the thermal stability of 3, addition of alpha,alpha,alpha-trifluorotoluene to either 1 or 2 results in C-F activation to give Cp*2TiF2 and PhCF2CF2Ph as the main products. This reactivity toward benzylic C-F bonds is also reflected in the reactivity toward the fluorinated borate anions [B(C6F5)4]- and {B(3,5-(CF3)2C6H3]4}-: reaction of Cp*2TiMe with their [PhNMe2H]+ salts results in a stable complex for the former anion, whereas rapid C-F activation is observed for the latter.     

Syntheses and reactivity of the diselenido molybdenum-manganese complex CpMoMn(CO)5(mu-Se2)

Reaction of CpMoMn(CO)(8) with elemental selenium and Me(3)NO in the absence of light yielded the diselenido complex CpMoMn(CO)(5)(mu-Se(2)), 2. Compound 2 contains a bridging diselenido ligand lying perpendicular to the Mo-Mn bond, Mo-Mn = 2.8421(10) A. In the presence of room light, the reaction yielded the tetranuclear metal complex Cp(2)Mo(2)Mn(2)(CO)(7)(mu(3)-Se)(4), 3 (36% yield), and 2 (7% yield). Compound 2 reacted with ethylene to yield the ethanediselenato complex CpMoMn(CO)(5)(mu-SeCH(2)CH(2)Se), 4, by insertion of ethylene into the Se-Se bond. Compound 2 also reacted with (PPh(3))(2)Pt(PhC(2)Ph) and CpCo(CO)(2) to yield the complexes CpMoMnPt(PPh(3))(2)(CO)(5)(mu(3)-Se)(2), 5, and Cp(2)CoMoMn(CO)(5)(mu(3)-Se)(2), 6, respectively, by insertion of the metal groupings CpCo and Pt(PPh(3))(2) into the Se-Se bond of 2. The oxo compound Cp(2)CoMo(O)Mn(CO)(5)(mu(3)-Se)(2), 7, was obtained from 6 by decarbonylation at molybdenum by using Me(3)NO. The molecular structures of the complexes 2-7 were established by single-crystal X-ray diffraction analyses.     

Naked (C5Me5)2M cations (M = Sc, Ti, and V) and their fluoroarene complexes

The ionic metallocene complexes [Cp*(2)M][BPh(4)] (Cp* = C(5)Me(5)) of the trivalent 3d metals Sc, Ti, and V were synthesized and structurally characterized. For M = Sc, the anion interacts weakly with the metal center through one of the phenyl groups, but for M = Ti and V, the cations are naked. They each contain one strongly distorted Cp* ligand, with one (V) or two (Ti) agostic C-H...M interactions involving the Cp*Me groups. For Sc and Ti, these Lewis acidic species react with fluorobenzene and 1,2-difluorobenzene to yield [Cp*(2)M(kappaF-FC(6)H(5))(n)][BPh(4)] (M = Sc, n = 2; M = Ti, n = 1) and [Cp*(2)M(kappa(2)F-1,2-F(2)C(6)H(4))][BPh(4)], the first examples of kappaF-fluorobenzene and kappa(2)F-1,2-difluorobenzene adducts of transition metals. With the perfluorinated anion [B(C(6)F(5))(4)](-), both Sc and Ti form [Cp*(2)M(kappa(2)F-C(6)F(5))B(C(6)F(5))(3)] contact ion pairs. The nature of the metal-fluoroarene interaction was studied by density functional theory (DFT) calculations and by comparison with the corresponding tetrahydrofuran (THF) adducts and was found to be predominantly electrostatic for all metals studied.     

Mononuclear Ni(III) complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]0/1- (L = thiolate, selenolate, CH2CN, Cl, PPh3): relevance to the nickel site of [NiFe] hydrogenases

The stable mononuclear Ni(III)-thiolate complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]- (L = SePh (2), Cl (3), SEt (4), 2-S-C4H3S (5), CH2CN (7)) were isolated and characterized by UV-vis, EPR, IR, SQUID, CV, 1H NMR, and single-crystal X-ray diffraction. The increased basicity (electronic density) of the nickel center of complexes [NiIII(L)(P(C6H3-3-SiMe3-2-S)3)]- modulated by the monodentate ligand L and the substituted groups of the phenylthiolate rings promotes the stability and reactivity. In contrast to the irreversible reduction at -1.17 V (vs Cp2Fe/Cp2Fe+) for complex 3, the cyclic voltammograms of complexes [NiIII(SePh)(P(o-C6H4S)3)]-, 2, 4, and 7 display reversible NiIII/II redox processes with E(1/2) = -1.20, -1.26, -1.32, and -1.34 V (vs Cp2Fe/Cp2Fe+), respectively. Compared to complex 2 containing a phenylselenolate-coordinated ligand, complex 4 with a stronger electron-donating ethylthiolate coordinated to the Ni(III) promotes dechlorination of CH2Cl2 to yield complex 3 (kobs = (6.01 +/- 0.03) x 10-4 s-1 for conversion of complex 4 into 3 vs kobs = (4.78 +/- 0.02) x 10-5 s-1 for conversion of complex 2 into 3). Interestingly, addition of CH3CN into complex 3 in the presence of sodium hydride yielded the stable Ni(III)-cyanomethanide complex 7 with a NiIII-CH2CN bond distance of 2.037(3) A. The NiIII-SEt bond length of 2.273(1) A in complex 4 is at the upper end of the 2.12-2.28 A range for the NiIII-S bond lengths of the oxidized-form [NiFe] hydrogenases. In contrast to the inertness of complexes 3 and 7 under CO atmosphere, carbon monoxide triggers the reductive elimination of the monodentate chalcogenolate ligand of complexes 2, 4, and 5 to produce the trigonal bipyramidal complex [NiII(CO)(P(C6H3-3-SiMe3-2-S)3]- (6).     

Silylene hydride complexes of molybdenum with silicon-hydrogen interactions: neutron structure of (eta(5)-C(5)Me(5))(Me(2)PCH(2)CH(2)PMe(2))Mo(H)(SiEt(2))

Reduction of CpMoCl(4) with 3.1 equiv of Na/Hg amalgam (1.0% w/w) in the presence of 1 equiv of dmpe and 1 equiv of trimethylphosphine afforded the molybdenum(II) chloride complex Cp(dmpe)(PMe(3))MoCl (1) (Cp = 1,2,3,4,5-pentamethylcyclopentadienyl, dmpe = 1,2-bis(dimethylphosphino)ethane). Alkylation of 1 with PhCH(2)MgCl proceeded in high yield to liberate PMe(3) and give the 18-electron pi-benzyl complex Cp(dmpe)Mo(eta(3)-CH(2)Ph) (2). Variable temperature NMR experiments provided evidence that 2 is in equilibrium with its 16-electron eta(1)-benzyl isomer [Cp(dmpe)Mo(eta(1)-CH(2)Ph)]. This was further supported by reaction of 2 with CO to yield the carbonyl benzyl complex Cp(dmpe)(CO)Mo(eta(1)-CH(2)Ph) (3). Complex 2 was found to react with disubstituted silanes H(2)SiRR' (RR' = Me(2), Et(2), MePh, and Ph(2)) to form toluene and the silylene complexes Cp(dmpe)Mo(H)(SiRR') (4a: RR' = Me(2); 4b: RR' = Et(2); 4c: RR' = MePh; 4d: RR' = Ph(2)). Reactions of 2 with monosubstituted silanes H(3)SiR (R = Ph, Mes, Mes = 2,4,6-trimethylphenyl) produced rare examples of hydrosilylene complexes Cp(dmpe)Mo(H)Si(H)R (5a: R = Ph; 5b: R = Mes; 5c: R = CH(2)Ph). Reactivity of complexes 4a-c and 5a-d is dominated by 1,2-hydride migration from metal to silicon, and these complexes possess H.Si bonding interactions, as supported by spectroscopic and structural data. For example, the J(HSi) coupling constants in these species range in value from 30 to 48 Hz and are larger than would be expected in the absence of H.Si bonding. A neutron diffraction study on a single crystal of diethylsilylene complex 4b unequivocally determined the hydride ligand to be in a bridging position across the molybdenum-silicon bond (Mo-H 1.85(1) A, Si-H 1.68(1) A). The synthesis and reactivity properties of these complexes are described in detail.     

Titanium(II) and titanium(III) tetrahydroborates. Crystal structures of [Li(Et2O)2][Ti2(BH4)5(PMe2Ph)4], Ti(BH4)3(PMe2Ph)2, and Ti(BH4)3(PEt3)2

The molecular structures of the titanium(III) borohydride complexes Ti(BH4)3(PEt3)2 and Ti(BH4)3(PMe2Ph)2 have been determined. If the BH4 groups are considered to occupy one coordination site, both complexes adopt distorted trigonal bipyramidal structures with the phosphines in the axial sites; the P-Ti-P angles deviate significantly from linearity and are near 156 degrees. In both compounds, two of the three BH4 groups are bidentate and one is tridentate. The deduced structures differ from the one previously described for the PMe3 analogue Ti(BH4)3(PMe3)2, in which two of the tetrahydroborate groups were thought to be bound to the metal in an unusual "side-on" (eta(2)-B,H) fashion. Because the PMe3, PEt3, and PMe2Ph complexes have nearly identical IR spectra, they most likely have similar structures. The current evidence strongly suggests that the earlier crystal structure of Ti(BH4)3(PMe3)2 was incorrectly interpreted and that these complexes all adopt structures in which two of the BH4 groups are bidentate and one is tridentate. The synthesis of the titanium(III) complex Ti(BH4)3(PMe2Ph)2 affords small amounts of a second product: the titanium(II) complex [Li(Et2O)2][Ti2(BH4)5(PMe2Ph)4]. The [Ti2(BH4)5(PMe2Ph)4]- anion consists of two Ti(eta(2)-BH4)2(PMe2Ph)2 centers linked by a bridging eta(2),eta(2)-BH4 group that forms a Ti...(mu-B)...Ti angle of 169.9(3) degrees. Unlike the distorted trigonal bipyramidal geometries seen for the titanium(III) complexes, the metal centers in this titanium(II) species each adopt nearly ideal tbp geometries with P-Ti-P angles of 172-176 degrees. All three BH4 groups around each Ti atom are bidentate. One of the BH4 groups on each Ti center bridges between Ti and an ether-coordinated Li cation, again in an eta(2),eta(2) fashion. The relationships between the electronic structures and the molecular structures of all these titanium complexes are briefly discussed.     

Synthesis and Anti-inflammatory Action of(η-C5H5)2Ti(Sal)2 and (η-C5H5)2Ti(Clo)2

Two new complexes (Cp)2Ti(Sal)2 and(Cp)2Ti(Clo)2(Cp=Cyclopentadienyl η5-C5H5), have been synthesized in anhydrous THF by the reaction of Hsal(o-hydroxybenzoic acid, salicylate acid) or Hclo[N-(m-chloro-phe-nyl) anthranili acid, acidum clofenamicum] with (Cp)2TiCl2 and characterized by means of elemental analyses, IR, 1H NMR, 13C NMR, UV and molar conductivity. In complex (Cp)2Ti(Sal)2 or (Cp)2Ti(Clo)2, the oxygen atom of the carboxyl group coordinates to Ti(IV) in a monodentate manner. The inhibitory action of the complexes on mouse ear tumefaction caused by croton oil and rat foot granulation growth caused by cotton balls is higher than that of the corresponding ligands Hsal, Hclo and [(Cp)2TiCl2], whereas their toxicity is lower than those of the free ligands.     

Cyclization of aromatic propargyl alcohol with a thiophene group yielding naphthothiophene aldehyde induced by a ruthenium complex

The reactions of [Cp(PPh(3))(2) RuCl] (Cp=cyclopentadienyl) with phenyl propargylic alcohol 1a, with a 3-thiophene group, are explored. The carbene complex 2a, obtained exclusively from this reaction at low temperature, contains the naphthothiophene group, which is formed through a new cyclization process between the thiophene group and the inner carbon of the triple bond. Details of this process have been revealed by conducting the reaction at room temperature, affording the allenylidene complex 3a as a side product. Complex 3a is not converted into 2a, indicating that the cyclization takes place while the triple bond is π coordinated to the metal center. Complex 2a reacts with oxygen in the presence of NEt(3) at room temperature to afford, in high yield, naphthothiophene aldehyde 4a, ONEt(3), OPPh(3), and [Cp(PPh(3))(2)RuCl]. Molecular O(2) is likely activated by coordination to the metal center when one of the phosphane ligands dissociates. Then, NEt(3) promotes the oxygenation process by reacting with the coordinated O(2) to afford ONEt(3) and possibly an unobserved oxo-carbene complex. Coupling of the oxo and carbene ligands then yields 4a and [Cp(PPh(3))(2) RuCl] in CHCl(3). In a solvent system containing MeOH, the oxygenation reaction affords a mixture of 4a and naphthothiophene ester 5a-1. The reactions of [Cp(dppf)RuCl] (dppf=1,1'-bis(diphenylphosphino)ferrocene) with 1a, also afford the carbene complex 2a', 4a, and 5a, which have been characterized by X-ray diffraction analyses. For the phenyl propargylic alcohol 1b, with a 2-thiophene substituent, different naphthothiophene aldehyde and ester compounds are also obtained in high yields through a similar cyclization process followed by oxygenation under mild conditions.