Modified Multidimensional Dissipation Scheme on Unstructured Meshes for High-speed Compressible Flow Analysis

A Roe's flux-difference splitting scheme, combining with the entropy fix method according to Van Leer et al., and the H-correction entropy fix method by Pandolfi and D'Ambrosio, is proposed. The presented scheme eliminates unphysical flow behaviors such as a spurious bump of the carbuncle phenomenon that occurs on the bow shock from flow over a blunt body, and the expansion shock generated from flow over a forward facing step. The proposed scheme is further extended to obtain high-order spatial and temporal solution accuracy. The scheme is, in addition, combined with an adaptive meshing technique that generates unstructured triangular meshes to resemble the flow phenomena for reducing computational effort. The entire procedure is evaluated by solving several benchmarks as well as complex steady-state and transient high-speed compressible flow problems.     

Combined adaptive meshing technique and characteristic-based split algorithm for viscous incompressible flow analysis

A combined characteristic-based split algorithm and an adaptive meshing technique for analyzing two-dimensional viscous incompressible flow are presented.The method uses the three-node triangular element with equal-order interpolation functions for all variables of the velocity components and pressure.The main advantage of the combined method is that it improves the solution accuracy by coupling an error estima- tion procedure to an adaptive meshing technique that generates small elements in regions with a large change in solution gradients,and at the same time,larger elements in the other regions.The performance of the combined procedure is evaluated by analyzing one test case of the flow past a cylinder,for their transient and steady-state flow behaviors.     

A pressure‐based unstructured grid method for all‐speed flows

An all‐speed algorithm based on the SIMPLE pressure‐correction scheme and the ‘retarded‐density’ approach has been formulated and implemented within an unstructured grid, finite volume (FV) scheme for both incompressible and compressible flows, the latter involving interaction of shock waves. The collocated storage arrangement for all variables is adopted, and the checkerboard oscillations are eliminated by using a pressure‐weighted interpolation method, similar to that of Rhie and Chow [Numerical study of the turbulent flow past an airfoil with trailing edge separation. AIAA Journal 1983; 21 : 1525]. The solution accuracy is greatly enhanced when a higher‐order convection scheme combined with adaptive mesh refinement (AMR) are used. Copyright © 2000 John Wiley & Sons, Ltd.     

Inviscid flow modelling using asymmetric implicit finite difference schemes

Asymmetric spatial implicit high‐order schemes are introduced and, based on Fourier analysis, the dispersion and damping are calculated depending on the asymmetry parameter. The derived schemes are then applied to a number of inviscid problems. For incompressible convection problems the proposed asymmetric schemes (applied as upwind schemes) lead to stable and accurate results. To extend the applicability of the proposed schemes to compressible problems acoustic upwinding is used. In a two‐dimensional compressible flow example acoustic and conventional upwinding are combined. Evaluation of all presented results leads to the conclusion that, of the studied schemes, the implicit fifth order upwinding scheme with an asymmetry parameter of about 0.5 leads to the optimal results. Copyright © 2005 John Wiley & Sons, Ltd.     

An h-adaptive solution of the spherical blast wave problem

Shock waves and contact discontinuities usually appear in compressible flows, requiring a fine mesh in order to achieve an acceptable accuracy of the numerical solution. The usage of a mesh adaptation strategy is convenient as uniform refinement of the whole mesh becomes prohibitive in three-dimensional (3D) problems. An unsteady h-adaptive strategy for unstructured finite element meshes is introduced. Non-conformity of the refined mesh and a bounded decrease in the geometrical quality of the elements are some features of the refinement algorithm. A 3D extension of the well-known refinement constraint for 2D meshes is used to enforce a smooth size transition among neighbour elements with different levels of refinement. A density-based gradient indicator is used to track discontinuities. The solution procedure is partially parallelised, i.e. the inviscid flow equations are solved in parallel with a finite element SUPG formulation with shock capturing terms while the adaptation of the mesh is sequentially performed. Results are presented for a spherical blast wave driven by a point-like explosion with an initial pressure jump of 10⁵ atmospheres. The adapted solution is compared to that computed on a fixed mesh. Also, the results provided by the theory of self-similar solutions are considered for the analysis. In this particular problem, adapting the mesh to the solution accounts for approximately 4% of the total simulation time and the refinement algorithm scales almost linearly with the size of the problem.     

Numerical solution of 2D and 3D turbulent internal flow problems

The paper describes a method for solving numerically two-dimensional or axisymmetric, and three-dimensional turbulent internal flow problems. The method is based on an implicit upwinding relaxation scheme with an arbitrarily shaped conservative control volume. The compressible Reynolds-averaged Navier-Stokes equations are solved with a two-equation turbulence model. All these equations are expressed by using a non-orthogonal curvilinear co-ordinate system. The method is applied to study the compressible internal flow in modern power installations. It has been observed that predictions for two-dimensional and three-dimensional channels show very good agreement with experimental results.     

Three-dimensional mesh embedding for the Navier–Stokes equations using upwind control volumes

A numerical model for the compressible Navier–Stokes equations using local mesh embedding is presented. The model solves for three-dimensional turbulent flow using an algebraic mixing length model of turbulence. The technique of control volume upwinding is used to produce a novel treatment, whereby the hanging nodes on the mesh interfaces are left with null control volumes. This yields an efficient discretization scheme which ensures second-order accuracy, flux conservation and stability at the mesh interfaces, whilst retaining a simple interpolative treatment for the hanging nodes. The discrete flow equations are solved using the semi-implicit pressure correction method. The accuracy of the embedded mesh solver is demonstrated by modelling the three-dimensional flow through a cascade of turbine vanes at design and off-design conditions. Mesh embedding gives a saving of 48% in the number of nodes. The embedded mesh solutions compare well with fine structured mesh solutions and experimental measurements. The capability of the embedded mesh solver to perform solution adaptive calculations is demonstrated using a two-dimensional mid-height section of the cascade at the off-design flow conditions.     

Direct Numerical Simulation of Turbulent Compression Ramp Flow

A numerical procedure for the direct numerical simulation of compressible turbulent flow and shock–turbulence interaction is detailed and analyzed. An upwind-biased finite-difference scheme with a compact centered stencil is used to discretize the convective part of the Navier–Stokes equations. The scheme has a uniformly high approximation order and allows for a spectral-like wave resolution while dissipating nonresolved wave numbers. When hybridized with an essentially nonoscillatory scheme near discontinuities, the scheme becomes shock–capturing and its resolution properties are preserved. Diffusive parts are discretized with symmetric compact finite differences and an explicit Runge–Kutta scheme is used for time-advancement. The peculiarities of efficient upwinding and coupling procedures are described and validation results are given. Using direct numerical simulation data, some aspects of turbulent supersonic compression ramp flow are studied to demonstrate the effectiveness of the simulation procedure. Received 13 November 1997 and accepted 14 May 1998     

一种强耦合预估-校正浸入边界法

为克服传统浸入边界法的质量不守恒缺陷,提出了一种用于可压缩流固耦合问题的强耦合预估-校正浸入边界法。通过阐述一般流固耦合系统的矩阵表示,推导了流固耦合系统的强耦合Gauss-Seidel迭代格式,进一步导出预估-校正格式,提出了预估-校正浸入边界法。该方法使用无耦合边界模型对流体进行预估,将流固耦合边界视为自由面,固体原本占据的空间初始化为零质量的单元,允许流体自由穿过耦合边界。对于流体的计算,使用带有minmod限制器的二阶MUSCL有限体积格式和基于Zha-Bilgen分裂的AUSM+-up方法,配合三阶Runge-Kutta格式推进时间步。在校正步骤中,通过一组质量守恒的输运规则来实现输运过程。输运算法可概括为将边界内侧的流体进行标记,根据标记顺序以均匀方式分割和移动流体,产生一个指向边界外侧的流动,最后在边界附近施加速度校正保证无滑移条件。标记和输运算法避免了繁琐的对截断单元的几何处理,确保了算法易于实现。对于固体的计算,分别采用一阶差分格式和隐式动力学有限元格式求解刚体和线弹性体,并利用高斯积分获得固体表面的耦合力。使用预估-校正浸入边界法计算了一维问题和二维问题。在一维活塞问题中,获得了压力分布、相对质量历史和误差曲线,并与其他方法进行了对比。在二维的激波冲击平板问题中,获得了数值模拟纹影和平板结构的挠度历史,并与实验结果进行了对比。研究表明,该方法区别于传统的虚拟网格方法和截断单元方法,能够精确地维持流场的质量守恒并易于实现,且具有一阶收敛精度,能够较准确地预测激波绕射后的流场以及平板在激波作用下的挠度,为开发流固耦合算法提供了一种新的思路。     

Parallel adaptive refinement for unsteady flow calculations on 3D unstructured grids

A parallel adaptive refinement algorithm for three‐dimensional unstructured grids is presented. The algorithm is based on an hierarchical h‐refinement/derefinement scheme for tetrahedral elements.The algorithm has been fully parallelized for shared‐memory platforms via a domain decomposition of the mesh at the algebraic level. The effectiveness of the procedure is demonstrated with applications which involve unsteady compressible fluid flow. A parallel speedup study of the algorithm also is included. Published in 2004 by John Wiley & Sons, Ltd.     

A numerical scheme for strong blast wave driven by explosion

After the detonation of a solid high explosive, the material has extremely high pressure keeping the solid density and expands rapidly driving strong shock wave. In order to simulate this blast wave, a stable and accurate numerical scheme is required due to large density and pressure changes in time and space. The compressible fluid equations are solved by a fractional step procedure which consists of the advection phase and non‐advection phase. The former employs the Rational function CIP scheme in order to preserve monotone signals, and the latter is solved by interpolated differential operator scheme for achieving the accurate calculation. The procedure is categorized into the fractionally stepped semi‐Lagrangian. The accuracy of our scheme is confirmed by checking the one‐dimensional plane shock tube problem with 10³ times initial density and pressure jump in comparison with the analytic solution. The Sedov–Taylor blast wave problem is also examined in the two‐dimensional cylindrical coordinate in order to check the spherical symmetry and the convergence rates. Two‐ and three‐dimensional simulations for the blast waves from the explosion in the underground magazine are carried out. It is found that the numerical results show quantitatively good agreement with the experimental data. Copyright © 2006 John Wiley & Sons, Ltd.     

Time‐dependent finite element simulations of a shear‐thinning viscoelastic fluid with application to blood flow

A new finite element method is developed to simulate time‐dependent viscoelastic shear‐thinning flows characterized by the generalized Oldroyd‐B model. The focus of the algorithm is improved stability through a free‐energy dissipative scheme by using low‐order piecewise‐constant finite element approximations for stress. The algorithm is further modified by incorporating a pressure‐projection method, a DG‐upwinding scheme, a symmetric interior penalty DG method to solve the elliptic pressure‐update equation and a geometric multigrid preconditioner. The improved stability and cost to accuracy is compared when using higher order discontinuous bilinear approximation, where in addition, we consider the influence of a slope limiter for these elements. The algorithm is applied to the 2D start‐up‐driven cavity problem, and the stability of the free energy is illustrated and compared between element choices. An application of the model to modelling blood in small arterioles and channels is considered by simulating pulsatile blood flow through a stenotic arteriole. The individual influences of viscoelasticity and shear‐thinning within the generalized Oldroyd‐B model are investigated by comparing results to the Newtonian, generalized Newtonian and Oldroyd‐B models. Copyright © 2014 John Wiley & Sons, Ltd.     

An upwind scheme for the three-dimensional boundary layer equations

The development of a calculation method to solve the compressible, three-dimensional, turbulent boundary layer equations is described. An implicit finite difference solution procedure is adopted involving local upwinding of convective transport terms. A consistent approach to discretization and linearization is taken by casting all equations in a similar form. The implementation of algebraic, one-equation and two-equation turbulence models is described. An initial validation of the method is made by comparing prediction with measurements in two quasi-three-dimensional boundary layer flows. Some of the more obvious deficiencies in current turbulence-modelling standards for three-dimensional flows are discussed.     

Nodeless variable finite element method for heat transfer analysis by means of flux-based formulation and mesh adaptation

Based on flux-based formulation, a nodeless variable element method is developed to analyze two-dimensional steady-state and transient heat transfer problems. The nodeless variable element employs quadratic interpolation functions to provide higher solution accuracy without necessity to actually generate additional nodes. The flux-based formulation is applied to reduce the complexity in deriving the finite element equations as compared to the conventional finite element method. The solution accuracy is further improved by implementing an adaptive meshing technique to generate finite element mesh that can adapt and move along corresponding to the solution behavior. The technique generates small elements in the regions of steep solution gradients to provide accurate solution, and meanwhile it generates larger elements in the other regions where the solution gradients are slight to reduce the computational time and the computer memory. The effectiveness of the combined procedure is demonstrated by heat transfer problems that have exact solutions. These problems are: (a) a steady-state heat conduction analysis in a square plate subjected to a highly localized surface heating, and (b) a transient heat conduction analysis in a long plate subjected to a moving heat source. The English text was polished by Yunming Chen.     

Examining a modified algorithm of smoothed particle hydrodynamics for a high velocity perforation of an aluminum beam

The wide spreading of utilizing of smoothed particle hydrodynamics (SPH) for numerical studies of the complex and high rate deformations of continuums, led the current study to gain a more reliable simulation by employing a modified compressible smoothed particle hydrodynamics (MCSPH) algorithm which could be a more accurate and stable technique in high tension regions, in despite of incompressible standard SPH. The main feature of the modified compressible SPH algorithm relies on a three steps solution procedure to calculate the pressure gradient, the deviatoric stress tensor, and the body forces separately. This algorithm is free of any artificial viscosity in its formulations, as well as welcoming to compressible effects which permits the pressure shock waves in high rate plastic deformation. To examine the accuracy of the algorithm, a benchmark problem of colliding rubber cylinders was simulated first and then a high velocity perforation process of an aluminum beam struck by a rigid projectile was simulated in various projectile speeds, and the failure response of the beam in each case was accompanied by crack propagation process. The prominent capability of the utilized MCSPH can be more illustrated when it was used in simulation of thickness crack propagation a tiny crack paths and defragmentation which can be encountered as a not easy numerical case study. The adequate assurance has been more fortified when the results were compared to those reported from a Finite Element method study.     

Acoustic upwinding for sub‐ and super‐sonic turbulent channel flow at low Reynolds number

A recently developed asymmetric implicit fifth‐order scheme with acoustic upwinding for the spatial discretization for the characteristic waves is applied to the fully compressible, viscous and non‐stationary Navier–Stokes equations for sub‐ and super‐sonic, mildly turbulent, channel flow (Re_τ=360). For a Mach number of 0.1, results are presented for uniform (32³, 64³ and 128³) and non‐uniform (expanding wall‐normal, 32³ and 64³) grids and compared to the (incompressible) reference solution found in (J. Fluid. Mech. 1987; 177 :133–166). The results for uniform grids on 128³ and 64³ nodes show high resemblance with the reference solution. Expanding grids are applied on 64³‐ and 32³‐node grids. The capability of the proposed technique to solve compressible flow is first demonstrated by increasing the Mach number to 0.3, 0.6 and 0.9 for isentropic flow on the uniform 64³‐grid. Next, the flow speed is increased to Ma=2. The results for the isothermal‐wall supersonic flows give very good agreement with known literature results. The velocity field, the temperature and their fluctuations are well resolved. This means that in all presented (sub‐ and super‐sonic) cases, the combination of acoustic upwinding and the asymmetric high‐order scheme provides sufficient high wave‐number damping and low wave‐number accuracy to give numerically stable and accurate results. Copyright © 2007 John Wiley & Sons, Ltd.     

Numerical solution of the Navier-Stokes equations using a finite element method

A finite element algorithm for solving the Navier-Stokes equations is presented for the analysis of high-speed viscous flows. The algorithm uses triangular elements. The unsteady equations are integrated to steady state with a Runge-Kutta time-marching scheme. A postprocessing artificial dissipation term is introduced to stabilize the computations and to dampen dissipation errors. Numerical results are compared with the calculation of uniform flow on a rectangular region which encounters an embedded oblique shock. A shock/turbulent boundary layer problem is also solved and results are compared with experimental data. It is shown that the postprocessing smoothing term and boundary conditions similar to the finite difference method work well in the present numerical studies.     

A method to trace sharp interface of two fluids in calculations involving shocks

A numerical method that can treat a contact discontinuity as a sharp discontinuity is proposed by introducing a density function. The surface of the density function representing the discontinuity can be described with alomost one grid on an Eulerian formulation throughout the calculation even if the surface distortion is large. The algorithm is based on the CIP (cubic-interpolated propagation) method combined with variable transformation. Smearings of the discontinuity are overcome without using any special treatment to the surface. Dependent variables on both sides of the surface are computed in a normal procedure. The present scheme is applied both to a compressible flow and quasi-incompressible flow accompanying shock discontinuities. The result exhibits advantages of this method in robustness and efficiency.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

A multiblock Navier–Stokes algorithm using equal-order quadratic finite elements

A new multiblock pressure-based finite element algorithm has been developed. This methodology implements quadratic interpolation for both the elemental velocity and pressure fields. A direct streamline upwinding scheme previously developedby the authors is used to model the non-linear inertia effects. Details of the algorithm and its multiblock foundation are provided along with validating test cases. The results presented clearly demonstrate the accuracy of this new approach and the differences in the pressure field for an element using quadratic versus the traditional bi linear approximation of the pressure field.     

A method for computing compressible,highly stratified flows in astrophysics based on operator splitting

A new numerical approach based on consistent operator splitting is presented for computing compressible, highly stratified flows in astrophysics. The algorithm is particularly designed to search for steady or almost steady solutions for the time-dependent Navier–Stokes equations, describing viscous flow under the influence of a strong gravitational field. The algorithm proposed is multidimensional and works in Cartesian, cylindrical or spherical co-ordinates. It uses a second-order finite volume scheme with third-order upwinding and a second-order time discretization. An adaptive time step control and monotonic multilevel grid distribution has been incorporated to speed up convergence. This method has been incorporated into a hydrodynamical code by which, for the first time, for two-dimensional models the dynamics of the boundary layer in the accretion disk around a compact star could be computed over the whole viscous time scale. © 1998 John Wiley & Sons, Ltd.