碳纳米管负载纳米金-石墨烯量子点修饰电极电化学检测过氧化氢

采用过氧化氢刻蚀法制备石墨烯量子点(GQDs),再采用原位化学还原法制备金纳米粒子-石墨烯量子点纳米复合物(Au NPs-GQDs),最后以聚二甲基二烯丙基氯化铵(PDDA)为交联剂将上述纳米复合物组装于多壁碳纳米管表面,制得金纳米粒子-石墨烯量子点-PDDA-多壁碳纳米管复合材料(Au NPs-GQDsPDDA-MWCNTs)。通过荧光光谱法、紫外-可见吸收光谱法和透射电子显微镜对上述复合材料进行表征。采用滴涂法制得该复合材料修饰的玻碳电极,研究了过氧化氢在该电极上的电化学行为。结果表明:在石墨烯量子点、金纳米粒子和多壁碳纳米管三者的协同作用下,该电极对过氧化氢的电氧化表现出强的催化活性。在优化条件下,安培法检测H_2O_2的线性范围为2.0×10~(-8)~1.5×10~(-3)mol/L,检出限(3sb)为8.0×10~(-9)mol/L,灵敏度为61.6μA/(mmol·L~(-1))。     

Hydrogen peroxide biosensor based on electrodeposition of zinc oxide nanoflowers onto carbon nanotubes film electrode

A new amperometric biosensor for hydrogen peroxide was developed based on adsorption of horseradish peroxidase at the glassy carbon electrode modified with zinc oxide nanoflowers produced by electrodeposition onto multi-walled carbon nanotubes （MWNTs） film. The morphology of the MWNTs/nano-ZnO electrode has been investigated by scanning electron microscopy （SEM）, and the electrochemical performance of the electrode has also been studied by amperometric method. The resulting electrode offered an excellent detection for hydrogen peroxide at -0.11 V with a linear response range of 9.9×10^-7 to 2.9×10^-3 mol/L with a correlation coefficient of 0.991, and response time 〈5 s. The biosensor displays rapid response and expanded linear response range, and excellent stability.     

六氰合铁酸铜钴-多壁碳纳米管修饰电极研究

采用电沉积方法制备六氰合铁酸铜钴-多壁碳纳米管复合修饰电极(CuCoHCF-MWCNTs/GCE).研究碳纳米管用量、电解液组成对该修饰电极性能的影响.结果表明,与单一的六氰合铁酸铜钴薄膜修饰电极相比,六氰合铁酸铜钴-多壁碳纳米管复合修饰电极具有更优良的电化学特性,以其催化氧化过氧化氢,峰电流与过氧化氢浓度在3.16×10-5～2.92×10-3mol·L-1范围内呈良好的线性关系,线性回归方程为ip(μA)=0.5529+1.1299C(×10-4mol·L-1),相关系数r=0.9966,检出限为1.75×10-5mol·L-1.     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

Heterometallic Co(III)(4)Fe(III)(2) Schiff Base Complex: Structure, Electron Paramagnetic Resonance, and Alkane Oxidation Catalytic Activity

The heterometallic complex [Co(4)Fe(2)OSae(8)]·4DMF·H(2)O (1) was synthesized by one-pot reaction of cobalt powder with iron chloride in a dimethylformamide solution of salicylidene-2-ethanolamine (H(2)Sae) and characterized by single crystal X-ray diffraction analysis, magnetic measurements, high frequency electron paramagnetic resonance (HF-EPR), and M?ssbauer spectroscopies. The exchange coupling in the Fe(III)-Fe(III) pair is of antiferromagnetic behavior with J/hc = -190 cm(-1). The HF-EPR spectra reveal an unusual pattern with a hardly detectable triplet signal of the Fe(III) dimer. The magnitude of D (ca. 13.9 cm(-1)) was found to be much larger than in related dimers. The catalytic investigations disclosed an outstanding activity of 1 toward oxidation of cycloalkanes with hydrogen peroxide, under mild conditions. The most efficient system showed a turnover number (TON) of 3.57 × 10(3) with the concomitant overall yield of 26% for cyclohexane, and 2.28 × 10(3)/46%, respectively, for cyclooctane. A remarkable turnover frequency (TOF) of 1.12 × 10(4) h(-1) (the highest initial rate W(0) = 3.5 × 10(-4) M s(-1)) was achieved in oxidation of cyclohexane. Kinetic experiments and selectivity parameters led to the conclusion that hydroxyl radicals are active (attacking C-H bonds) species. Kinetic and electrospray ionization mass spectrometry (ESI-MS) data allowed us to assume that the trinuclear heterometallic particle [Co(2)Fe(Sae)(4)](+), originated from 1 in solution, could be responsible for efficient generation of hydroxyl radicals from hydrogen peroxide.     

Fabrication of herbicide biosensors based on the inhibition of enzyme activity that catalyzes the scavenging of hydrogen peroxide in a thylakoid membrane.

A novel herbicide biosensor with a thylakoid modified membrane electrode is presented. Thylakoid, isolated from spinach leaves, was entrapped in a membrane of poly (vinylalcohol) with the styrylpyridinium group (PVA-SbQ). The thylakoid membrane was fixed on the surface of a platinum electrode. It was found that the enzymes in thylakoid kept their activity for several months in the membrane. The oxidative current of hydrogen peroxide in a Tris-HCl buffer solution (pH 7.4) was detected at the modified electrode by a differential pulse voltammetric method. In the presence of herbicides, the oxidation current from the hydrogen peroxide decreased due to an inhibitor effect on the enzymes in thylakoid compared with that in the absence of the herbicides. The changes in the oxidation current at the electrode were proportional to the herbicide concentrations. The sensor could be used to detect herbicides in concentration ranges of 3 x 10(-9) - 1.5 x 10(-7) M for paraquat, 1 x 10(-8) - 3 x 10(-7) M for diuron, 4 x 10(-8) - 3 x 10(-6) M for prometryn, 5 x 10(-8) - 5 x 10(-6) M for atrazine and 1 x 10(-7) - 5 x 10(-6) M for ametryn, respectively. The enzyme activity on scavenging hydrogen peroxide in the modified PVA-SbQ membrane was examined.     

Intensification of electrochemiluminescence of luminol on TiO2 supported Au atomic cluster nano-hybrid modified electrode

With TiO(2) nanoparticles as carrier, a supported nano-material of Au atomic cluster/TiO(2) nano-hybrid was synthesized. It was then modified onto the surface of indium tin oxide (ITO) by Nafion to act as a working electrode for exciting the electrochemiluminescence (ECL) of luminol. The properties of the nano-hybrid and the modified electrode were characterized by XRD, XPS, electronic microscopy, electrochemistry and spectroscopy. The experimental results demonstrated that the modification of this nano-hybrid onto the ITO electrode efficiently intensified the ECL of luminol. It was also revealed that the ECL intensity of luminol on this modified electrode showed very sensitive responses to oxygen and hydrogen peroxide. The detection limits for dissolved oxygen and hydrogen peroxide were 2 μg L(-1) and 5.5 × 10(-12) M, respectively. Besides the discussion of the intensifying mechanism of this nano-hybrid for ECL of luminol, the developed method was also applied for monitoring dissolved oxygen and evaluating the scavenging efficiency of reactive oxygen species of the Ganoderma lucidum spore.     

Potentiometric flow-injection determination of trace hydrogen peroxide based on its induced reaction in iron(III)-iron(II) potential buffer containing bromide and molybdenum(VI)

A rapid and highly sensitive potentiometric flow-injection method for the determination of trace hydrogen peroxide was developed by use of an Fe(III)-Fe(II) potential buffer solution containing bromide and Mo(VI). The analytical method was based on a linear relationship between a concentration of hydrogen peroxide and a largely transient potential change of an oxidation-reduction potential electrode due to bromine generated by the reaction of hydrogen peroxide with the potential buffer solution. The oxidation of bromide to bromine by hydrogen peroxide occurred very rapidly with the assistance of Mo(VI) when Fe(II) existed in the potential buffer solution. It was estimated by batchwise experiments that hydroxyl radical, OH., was generated by the reaction of hydrogen peroxide with Fe(II) as an intermediate, and subsequently oxidized bromide to bromine. In a flow system, analytical sensitivities to hydrogen peroxide obtained by the detection of the transient change of potential were enhanced about 75 fold compared with those obtained by using the potential change caused by the reaction of hydrogen peroxide with the potential buffer solution without bromide and Mo(VI). Sensitivities increased with decreasing concentration of the Fe(III)-Fe(II) buffer in the reagent solution. The detection limit (S/N = 3) of 4 x 10(-7) M (13.6 ppb) was achieved by using the 1 x 10(-4) M Fe(III)-Fe(II) buffer containing 0.4 M NaBr, 1.0 M H(2)SO(4) and 0.5% (NH(4))(6)Mo(7)O(24). Analytical throughput was approximately 40 h(-1) and the RSD (n = 6) was 0.6% for measurement of 4 x 10(-6) M hydrogen peroxide. The proposed method was applied to the determination of hydrogen peroxide in real rainwater samples, and was found to provide a good recovery for H(2)O(2) added to rainwater samples.     

Electrocatalytic oxidation of L-tryptophan using copper hexacyanoferrate film modified gold nanoparticle graphite-wax electrode

A novel copper hexacyanoferrate (CuHCF) film modification on cysteamine (Cys)-gold nanoparticle (AuNp) graphite-wax (GW) composite electrode was achieved for the quantitative determination of L-Tryptophan (L-Trp) at a reduced overpotential of 400mV in comparison with the bare Cys-AuNp-GW composite electrode. This modified electrode exhibited a well resolved pair of redox peaks corresponding to the hexacyanoferrate (II/III) reactions of CuHCF film at a formal potential of 0.65 V at a scan rate of 20 mV s(-1). Electrochemical impedance spectroscopy (EIS) studies with the modified electrode showed a very low charge transfer resistance to the electron transfer kinetics of Fe(II)/Fe(III) reactions. A linear range of 8.5×10(-7) M to 1.2×10(-4) M with a detection limit of 1.85×10(-8) M was achieved for the determination of L-Trp with a sensitivity of 0.1198 μA/μM. The influence of ultrasonication on the stability of the CuHCF film modified electrode was investigated. In addition, the CuHCF film modified electrode displayed an excellent reproducibility towards the real time analysis of L-Trp in commercial milk samples.     

Nickel-Zeolite modified carbon paste electrode as electrochemical sensor for hydrogen peroxide

In the present work, nickel-zeolite modified carbon paste electrode (Ni-ZMCPE) was prepared. The electrochemical behaviour of hydrogen peroxide at the surface of modified electrode was investigated by cyclic voltammetry and chronoamperometry in 0.1 M NaOH supporting electrolyte. The electrochemical characterization of Ni-ZMCPE exhibits redox behavior of Ni(III)/Ni(II) couple in alkaline medium. It has been shown that Ni-ZMCPE improves efficiency of the modified electrode toward hydrogen peroxide electrooxidation (It wasn’t remarkable different on ZMCPE and CPE in the presence and absence of hydrogen peroxide). Moreover, the effects of various parameters such as effect of different percents of Ni-Z to graphite, effect of pH and hydrogen peroxide concentration on the electrooxidation of hydrogen peroxide as well as stability of the Ni-ZMCPE have also been investigated. Under the selected conditions, the anodic peak current was linearly dependent on the concentration of hydrogen peroxide in the range 0.03–0.1 and 0.3–6 mM with amperometric method. The detection limit (S/N = 3) was also estimated to be 1 μM.     

Electrocatalytic Oxidation of Hydrogen Peroxide on Poly(m‐toluidine)‐Nickel Modified Carbon Paste Electrode in Alkaline Medium

The poly(m‐toluidine) film was prepared by using the repeated potential cycling technique in an acidic solution at the surface of carbon paste electrode. Then transition metal ions of Ni(II) were incorporated to the polymer by immersion of the modified electrode in a 0.2 M NiSO₄, also the electrochemical characterization of this modified electrode exhibits stable redox behavior of the Ni(III)/Ni(II) couple. The electrocatalytic ability of Ni(II)/poly(m‐toluidine)/modified carbon paste electrode (Ni/PMT/MCPE) was demonstrated by electrocatalytic oxidation of hydrogen peroxide with cyclic voltammetry and chronoamperometry methods in the alkaline solution. The effects of scan rate and hydrogen peroxide concentration on the anodic peak height of hydrogen peroxide oxidation were also investigated. The catalytic oxidation peak current showed two linear ranges with different slopes dependent on the hydrogen peroxide concentration and the lower detection limit was 6.5 μM (S/N=3). The catalytic reaction rate constant, (k_h), was calculated 5.5×10² M^?1 s^?1 by the data of chronoamperometry. This modified electrode has many advantages such as simple preparation procedure, good reproducibility and high catalytic activity toward the hydrogen peroxide oxidation. This method was also applied as a simple method for routine control and can be employed directly without any pretreatment or separation for analysis cosmetics products.     

Determination of horseradish peroxidase and a peroxidase-like iron porphyrin at a Nafion-modified electrode.

A catalytic coupling reaction between 4-amino antipyrine and a N,N-disubstituted aniline derivative has been exploited in the indirect electrochemical detection of horseradish peroxidase (HRP) and of a biomimetic catalyst, the iron(III) sulfonated tetraphenyl porphyrin. In the presence of hydrogen peroxide and one of the two catalysts a cationic electroactive quinone-iminium dye P+ was formed and detected by linear scan voltammetry using a screen-printed electrode coated with a Nafion film. Detection limits of 10(-12) M for HRP and 4 x 10(-10) M for the iron porphyrin have been achieved. In conclusion the iron porphyrin is considered to be a promising alternative to the HRP label in enzyme immunoassays with electrochemical detection.     

Kinetic flow-injection determination of hydrogen peroxide by use of iron(III)-catalyzed coloration and its application to the determination of biological substances.

A kinetic flow-injection (FI) method is described for the determination of hydrogen peroxide. This method is based on an iron(III)-catalyzed oxidative coupling of 4-aminoantipyrine with N,N-dimethylaniline by hydrogen peroxide. By measuring the change in the absorbance of the dye formed at 560 nm, 1 x 10(-6) - 6 x 10(-4) M hydrogen peroxide could be determined with a sampling rate of 15 h(-1). The relative standard deviation (n = 30) was 0.8% for 5 x 10(-5) M hydrogen peroxide. There was little interference of the co-existing ions and compounds. After introducing some immobilized enzyme reactors to the FI system, the proposed method allowed the determination of glucose and uric acid ranging from 1 x 10(-6) to 6 x 10(-4) M with relative standard deviations of below 2%. The applicability of the method was demonstrated by determining these substances in serum samples.     

Selective determination of hydrogen peroxide by adduct formation with a dinuclear iron(III) complex and flow injection analysis/tandem mass spectrometry

A highly selective method for the determination of hydrogen peroxide is presented. In a flow injection analysis (FIA) instrument, the analyte is brought into contact with a dinuclear heptadentate iron(III) complex. The formation of the peroxide adduct is quantified using electrospray tandem mass spectrometry (ESI-MS/MS). Selected reaction monitoring (SRM) based on the transition from the triply charged peroxide adduct with m/z = 251.2 to the triply charged fragment ion of m/z = 240.5 is performed. The limit of detection for hydrogen peroxide is 10(-7) mol dm(-3), limit of quantification is 3 x 10(-7) mol dm(-3), and a linear range of 2.5 decades starting at the limit of quantification is observed.     

化学修饰电极的研究 V:铁卟啉修饰电极对氧的催化还原

By surface organio synthesis a Fe (III) tetra-o-aminophenyl porphyrin modified electrode was successfully prepared on glassy carbon electrode surface through amidization. The preparation considitions were invesigated in detail. Using cyclie voltametry and cyclie semidifferential polarography in an acidic aqueous solution the behavior of the catalytic reduction of oxygen on iron porphyrin modified electrode was studied. Based on experimental results it was shown that the irreversible process of 2- electronreduction to hydrogen peroxide belongs to EC parallel catalytic process.     

壳聚糖-铜复合物修饰电极对过氧化氢电催化性能的研究

将壳聚糖与铜盐通过配位结合制得壳聚糖-铜复合物(CTS-Cu),并用其修饰玻碳电极,使用循环伏安法和计时安培法研究了该修饰电极对H2O2的电催化性能,对其催化机理进行了探讨.优化的实验条件为:以0.1 mol/L.磷酸缓冲溶液(PBS,pH 7.0)为反应介质,CTS-Cu修饰液中的铜离子浓度为6 mmol/L,工作电...     

基于二氧化锆和碳纳米管协同作用的过氧化氢生物传感器

过氧化氢作为一种重要的化工产品在纺织行业、化工行业、造纸工业、环保行业、电子行业、食品卫生行业及其他领域得到广泛的应用~([1]).     

Enzyme-functionalized gold nanowires for the fabrication of biosensors

Gold nanowires were prepared by an electrodeposition strategy using nanopore polycarbonate (PC) membrane, with the average diameter of the nanowires about 250 nm and length about 10 microm. The nanowires prepared were dispersed into chitosan (CHIT) solution and stably immobilized onto glassy carbon electrode (GCE) surface. The electrochemical behavior of gold nanowire modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H(2)O(2)) were investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. Moreover, the good biocompatibility of nanometer-sized gold, the vast surface area of the nanowire-structure make it ideal for adsorption of enzymes for the fabrication of biosensors. Glucose oxidase was adsorbed onto the nanowire surface to fabricate glucose biosensor as an application example. The detection of glucose was performed in phosphate buffer (pH 6.98) at -0.2 V. The resulting glucose biosensor exhibited sensitive response, with a short response time (<8 s), a linear range of 10(-5)-2 x 10(-2) M and detection limit of 5 x 10(-6) M.     

Electrochemical properties of myoglobin deposited on multi-walled carbon nanotube/ciprofloxacin film

We report the direct electrochemical and electrocatalytic properties of myoglobin (MB) on a multi-walled carbon nanotube/ciprofloxacin (MWCNT/CF) film-modified electrode. A highly homogeneous MWCNT thin-film was prepared on an electrode surface using ciprofloxacin (CF) as a dispersing agent. MB was then electrochemically deposited onto the MWCNT/CF-modified electrode. The MB/MWCNT/CF film was characterized by scanning electron microscopy and UV-visible spectroscopy (UV-vis). UV-vis spectra confirmed that MB retained its original state on the MWCNT/CF film. Direct electrochemical properties of MB on the MWCNT/CF film were investigated by cyclic voltammetry. The formal potential and electron transfer rate constant were evaluated in pH 7.2 buffer solution as -0.327V and 300s(-1), respectively. In addition, the MB/MWCNT/CF-modified electrode showed excellent electrocatalytic properties for the reduction of hydrogen peroxide (H(2)O(2)). The MB/MWCNT/CF-modified electrode was used for the detection of H(2)O(2) at concentrations from 1×10(-6)M to 7×10(-4)M in pH 7.2 buffer solution. Overall, the MB/MWCNT/CF-modified electrode was very stable and has potential for development as a H(2)O(2) sensor.     

Catalase Like Activity of Iron Phthalocyanine Incorporated in a Carbon Paste Electrode

Abstract

The electrochemical oxidation of hydrogen peroxide has been investigated using a modified carbon paste electrode, by incorporating iron phthalocyanine. This offers interesting properties due to the catalase like activity of the electrode.

The utilization of this type of electrode permits the quantitative determination of hydrogen peroxide at concentrations down to 5x10^?5 M.