Electronic gel protein transfer and identification using matrix-assisted laser desorption/ionization-mass spectrometry

An electronic protein transfer technique is described for achieving the rapid and efficient recovery of sodium dodecyl sulfate (SDS)-protein complexes from polyacrylamide gels. This process involves the use of small-dimension capillaries in physical contact with a resolved protein band within the polyacrylamide gel, providing a large potential drop and high electric field strength at the capillary/gel interface. Several factors controlling the electronic protein transfer, including the applied electric field strength, the electrophoresis buffer concentration, and the capillary dimension, are studied to further enhance the use of field-amplification for sample stacking of extracted SDS-protein complexes. As a result of sample stacking, the extracted proteins from a 50 ng gel loading are present in a narrow ( approximately 80 nL) and highly concentrated (0.46 mg/mL or 3.3 x 10(-5) M for cytochrome c) solution plug. Three model proteins with molecular mass ranging from 14 kDa (cytochrome c) to 116 kDa (beta-galactosidase) are stained by Coomassie blue and electrophoretically extracted from gels with protein loadings as low as 50 ng. The capillary format of the electronic protein transfer technique allows direct deposition of extracted proteins onto a matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) target. Various matrices and solvent compositions are evaluated for the analysis of extracted and concentrated SDS-protein complexes using MALDI-MS. The electronic protein transfer technique, when operated under optimized conditions, is demonstrated for the effective (>70% recovery), speedy (less than 5 min), and sensitive MS identification of gel resolved proteins (as low as 50 ng).     

Prevention of artifactual protein oxidation generated during sodium dodecyl sulfate-gel electrophoresis

Prevention of artifactual protein oxidation occurring during sodium dodecyl sulfate (SDS) acrylamide gel electrophoresis is critical for identifying physiological protein oxidation implicated in human diseases due to the routine use of gel electrophoresis to separate the multiple proteins in proteomic studies. To develop a methodology that completely prevents artifactual protein oxidation in SDS acrylamide gel electrophoresis, cytochrome c was electrophoresed on polyacrylamide gels and subjected to trypsin in-gel digestion followed by tryptic peptide analysis by mass spectrometry. It was found that degassing the acrylamide solution to remove molecular oxygen prior to gel polymerization is a crucial process to protect the electrophoresed protein from reactive oxygen species generated during electrophoresis. However, significant artifactual protein oxidation remains that can only be eliminated entirely, if proteins are electrophoresed on an SDS gel photopolymerized with flavin as the photoinitiator and thioglycolate included in the cathode buffer as a reactive oxygen species scavenger. Using this combination of methodologies, cytochrome c isolated from adult rat heart mitochondria was purified and digested followed by mass spectrometric analysis, demonstrating the requisite high resolution of the polyacrylamide gel and the entire elimination of artifactual oxidation.     

Observation of sodium gel-induced protein modifications in dodecylsulfate polyacrylamide gel electrophoresis and its implications for accurate molecular weight determination of gel-separated proteins by matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption ionization (MALDI) time-of-flight mass spectrometry (TOFMS) can potentially provide accurate molecular weight information of proteins separated by sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS-PAGE). Several issues related to resolution and accuracy of molecular weight measurement are investigated by using a time-lag focusing MALDI-TOF mass spectrometer. The effects of the gel components SDS, glycerol, and tris buffer on the mass spectral signals are studied systematically. Glycerol and tris buffer are shown to have little or no effect on resolution and mass accuracy, whereas SDS degrades sensitivity, resolution, and mass accuracy even at low concentrations. A simple and fast gel extraction technique is presented which is capable of detecting proteins loaded at the low-picomole level on the gel. The sample preparation procedure used in this work appears to remove most of SDS from the gel, thereby reducing the peak broadening effect caused by SDS and resulting in high resolution and accurate measurement of proteins. However, for proteins containing cysteines, the molecular ions are composed of a distribution of acrylamide-protein adducts likely formed by reaction with unpolymerized acrylamide in the gel during the gel separation process. The implications of gel-induced protein modifications on the accurate molecular weight measurement of gel-separated proteins are discussed.     

Removal of sodium dodecyl sulfate from protein samples prior to matrix-assisted laser desorption/ionization mass spectrometry

Sodium dodecyl sulfate (SDS) is widely used for protein solubilization and for separation of proteins by SDS polyacrylamide gel electrophoresis (SDS-PAGE). However, SDS interferes with other techniques used for characterization of proteins, such as mass spectrometry (MS) and amino acid sequencing. In this paper, we have compared three procedures to remove SDS from proteins, including chloroform/methanol/water extraction (C/M/W), cold acetone extraction and desalting columns, in order to find a rapid and reproducible procedure that provides sufficient reduction of SDS and high recovery rates for proteins prior to matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). A 1000-fold reduction of SDS concentration and a protein recovery at approximately 50% were obtained with the C/M/W procedure. The cold acetone procedure gave a 100-fold reduction of SDS and a protein recovery of approximately 80%. By using desalting columns, the removal of SDS was 100-fold, with a protein recovery of nearly 50%. Both the C/M/W and the cold acetone methods provided sufficient reduction of SDS, high recovery rates of protein and allowed the acquisition of MALDI spectra. The use of n-octyl-beta-D-glucopyranoside in the protein sample preparation enhanced the MALDI signal for protein samples containing more than 2 10(-4)% SDS, after the C/M/W extraction. Following the cold acetone procedure, the use of n-octylglucoside was found to be necessary in order to obtain spectra, but they were of lower quality than those obtained with the C/M/W method, probably due to higher residual amounts of SDS.     

Capturing sodium dodecyl sulfate-treated protein antigens by antibody affinity electrophoresis

Modifications to antibody affinity electrophoresis for improved detection of proteins have been developed. The bifunctional linker glutaraldehyde is added to the polyacrylamide gel solution for better incorporation of the bait antibody into a distinct region of a 10% w/v polyacrylamide gel. The addition of glutaraldehyde alleviates the need of an electrophoresis buffer with a specific pH. The protein sample to be analyzed is treated with 2% w/v sodium dodecyl sulfate (SDS) to ensure that they carry a negative charge. The negative charge will allow the proteins to migrate towards the cathode and hence pass through the area embedded with the bait antibody. It is observed that electrophoretic migration of bovine serum albumin (BSA) or protein G ceases upon encounter with anti-BSA whereas proteins ovalbumin, beta-lactoglobulin A, and myoglobin migrate freely. However, the addition of 0.1% w/v SDS in the native gel running buffer disrupts the antibody-antigen bond and neither BSA nor protein G can be captured by anti-BSA.     

Simultaneous electrophoretic analysis of proteins of very high and low molecular mass using Tris‐acetate polyacrylamide gels

To separate and analyze giant and small proteins in the same electrophoresis gel, we have used a 3–15% polyacrylamide gradient gel containing 2.6% of the crosslinker bisacrylamide and 0.2 M of Tris‐acetate buffer (pH 7.0). Samples were prepared in a sample buffer containing lithium dodecyl sulphate and were run in the gel described above using Tris‐Tricine‐SDS‐sodium bisulfite buffer, pH 8.2, as electrophoresis buffer. Here, we show that this system can be successfully used for general applications of SDS‐PAGE such as CBB staining and immunoblot. Thus, by using Tris‐acetate 3–15% polyacrylamide gels, it is possible to simultaneously analyze proteins, in the mass range of 10–500 kDa, such as HERC1 (532 kDa), HERC2 (528 kDa), mTOR (289 kDa), Clathrin heavy chain (192 kDa), RSK (90 kDa), S6K (70 kDa), β‐actin (42 kDa), Ran (24 kDa) and LC3 (18 kDa). This system is highly sensitive since it allows detection from as low as 10 μg of total protein per lane. Moreover, it has a good resolution, low cost, high reproducibility and allows for analysis of proteins in a wide range of weights within a short period of time. All these features together with the use of a standard electrophoresis apparatus make the Tris‐acetate‐PAGE system a very helpful tool for protein analysis.     

Investigation of Fasciola hepatica sample preparation for two-dimensional electrophoresis

This paper investigates the preparation of Fasciola hepatica samples for two-dimensional electrophoresis (2-DE). Whole samples were prepared by both hot sodium dodecyl sulfate (SDS) solubilisation and precipitation using trichloroacetic acid (TCA) to remove nonprotein contaminants and to inactivate endogenous proteases. Sample preparation had a marked influence on the 2-DE gel profile. TCA precipitation resulted in no measurable improvement in the profile observed, compared to the untreated control. Solubilisation of sample with hot SDS increased the number of protein spots, as did TCA precipitation with the addition of phosphotungstic acid. The preparation of excretory-secretory (ES) products poses problems due to both high salt concentrations and low protein concentration. All precipitation methods used to overcome this gave similar profiles, except acetone alone, which caused depletion of the larger proteins. TCA in acetone gave the best result, similar to that obtained by centrifugal filtration of the sample. Overcrowding of spots in some regions of the 2-DE gel occurred in the whole Fasciola hepatica sample. This problem was alleviated by differential solubilisation, which also resulted in the enrichment of some proteins.     

Two-dimensional electrophoresis of membrane proteins

One third of all genes of various organisms encode membrane proteins, emphasizing their crucial cellular role. However, due to their high hydrophobicity, membrane proteins demonstrate low solubility and a high tendency for aggregation. Indeed, conventional two-dimensional gel electrophoresis (2-DE), a powerful electrophoretic method for the separation of complex protein samples that applies isoelectric focusing (IEF) in the first dimension and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) in the second dimension, has a strong bias against membrane proteins. This review describes two-dimensional electrophoretic techniques that can be used to separate membrane proteins. Alternative methods for performing conventional 2-DE are highlighted; these involve replacing the IEF with electrophoresis using cationic detergents, namely 16-benzyldimethyl-n-hexadecylammonium chloride (16-BAC) and cetyl trimethyl ammonium bromide (CTAB), or the anionic detergent SDS. Finally, the separation of native membrane protein complexes through the application of blue and clear native gel electrophoresis (BN/CN-PAGE) is reviewed, as well as the free-flow electrophoresis (FFE) of membranes.     

Analysis of intact proteins from cerebrospinal fluid by matrix-assisted laser desorption/ionization mass spectrometry after two-dimensional liquid-phase electrophoresis

A novel combination of methods, two-dimensional liquid-phase electrophoresis (2D-LPE) and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS), have been used for the analysis of intact brain-specific proteins in cerebrospinal fluid (CSF). 2D-LPE is especially useful for isolating proteins present in low concentrations in complex biological samples. The proteins are separated in the first dimension by liquid-phase isoelectric focusing (IEF) in the Rotofor cell and in the second dimension by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) in the Preparative cell. The removal of SDS by chloroform/methanol/water, followed by sample preparation with the addition of n-octylglucoside, easily interfaced 2D-LPE with MALDI-TOFMS for analysis of intact proteins. Further characterization by proteolytic digestion is also demonstrated. The knowledge of both the molecular weights of the protein and of the proteolytic fragments obtained by peptide mapping increases specificity for protein identification by searching in protein sequence databases. Two brain-specific proteins in human CSF, cystatin C and transthyretin, were isolated in sufficient quantity for determination of the mass of the whole proteins and their tryptic digest by MALDI-TOFMS. This approach simplified the interface between electrophoresis and MALDI-TOFMS.     

India ink staining after sodium dodecyl sulfate polyacrylamide gel electrophoresis and in conjunction with Western blots for peptide mapping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

We present an approach that allows matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) peptide mapping of proteins separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) and electroblotted onto nitrocellulose (NC). After blocking the nitrocellulose membrane with polyvinylpyrrolidone-40 the immobilized proteins are visualized using India Ink staining which allows the detection of low nanogram amounts of protein. The utilization of a low concentration of Tween 20 (0.05%) in the India Ink staining solution does not negatively impair the quality of the mass spectra. Due to the virtual nondestructive nature of the stain proteolytic peptides could be recovered from the NC membrane. Taking into account minor precautions during the sample manipulation and concentration and by loading the sample onto a pre-crystallized matrix layer, high quality mass spectral data were obtained on <100 femtomoles of protein loaded onto the gel. Finally, the use of India Ink in conjunction with Western blot analysis is also demonstrated. A rat plasma protein, characterized by Western blot as a covalently modified protein-drug compound, was subjected to peptide mapping and post source decay (PSD) sequencing of peptides. The zomepirac-modified protein was identified as the alpha-subunit of fibrinogen.     

Vertical agarose gel electrophoresis and electroblotting of high-molecular-weight proteins

The electrophoretic separation of high-molecular-weight proteins (> 500 kDa) using polyacrylamide is difficult because gels with a large enough pore size for adequate protein mobility are mechanically unstable. A 1% vertical sodium dodecyl sulfate (SDS)-agarose gel electrophoresis (VAGE) system has been developed that allows titin (a protein with the largest known SDS subunit size of 3000-4000 kDa) to migrate over 10 cm in a approximately 13 cm resolving gel. Such migration gives clear and reproducible separation of titin isoforms. Proteins ranging in size from myosin heavy chain ( approximately 220 kDa) up to titin can be resolved on this gel system. Electroblotting of these very large proteins was nearly 100% efficient. This VAGE system has revealed two titin size variants in rabbit psoas muscle, two N2BA bands in rabbit cardiac muscle, and species differences between titins from rat and rabbit muscle. Agarose electrophoresis should be the method of choice for separation and blotting of proteins with very large subunit sizes.     

Electrophoretic characterization of a novel cysteine protease produced by Vibrio harveyi

Electrophoretic characterization of a novel cysteine protease produced by pathogenic luminous Vibrio harveyi, originally isolated from diseased tiger prawn Penaeus monodon in Taiwan, is demonstrated in the present study using native polyacrylamide gel electrophoresis (native PAGE), sodium dodecyl sulfate-PAGE (SDS-PAGE), crossed immunoelectrophoresis (CIE) and isoelectric focusing (IEF) gels. The protease has a pI of 6.4 and exhibits a fast-migrating feature in native-PAGE and CIE gels indicating that it is a negatively charged protease. The protease electrophoresed as a 22 kDa protein band in native- and SDS-PAGE (in SDS - buffer with or without the presence of 2-mercaptoethanol) while it electrophoresed as a 38 kDa protein band in SDS-PAGE when the samples were boiled for 10 min prior to electrophoresis. The results reveal that the enzyme is an SDS-resistant monomeric protease and its high negative charge is not influenced by SDS (detergent) without boiling the sample. The present results are useful in determining proteins of similar nature to this unique cysteine protease.     

Development of a novel two-dimensional gel electrophoresis protocol with agarose native gel electrophoresis

A new protocol for conducting two-dimensional (2D) electrophoresis was developed by combining the recently developed agarose native gel electrophoresis with either vertical sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE) or flat SDS agarose gel electrophoresis. Our innovative technique utilizes His/MES buffer (pH 6.1) during the first-dimensional (1D) agarose native gel electrophoresis, which allows for the simultaneous and clear visualization of basic and acidic proteins in their native states or complex structures. Our agarose gel electrophoresis is a true native electrophoresis, unlike blue native–PAGE, which relies on the intrinsic charged states of the proteins and their complexes without the need for dye binding. In the 2D, the gel strip from the 1D agarose gel electrophoresis is soaked in SDS and placed on top of the vertical SDS–PAGE gels or the edge of the flat SDS–MetaPhor high-resolution agarose gels. This allows for customized operation using a single electrophoresis device at a low cost. This technique has been successfully applied to analyze various proteins, including five model proteins (BSA, factor Xa, ovotransferrin, IgG, and lysozyme), monoclonal antibodies with slightly different isoelectric points, polyclonal antibodies, and antigen–antibody complexes, as well as complex proteins such as IgM pentamer and β-galactosidase tetramer. Our protocol can be completed within a day, taking approximately 5–6 h, and can be expanded further into Western blot analysis, mass spectrometry analysis, and other analytical methods.     

High-throughput separation of DNA and proteins by three-dimensional geometry gel electrophoresis: feasibility studies

We report a novel separation method that is applicable to both DNA and protein samples, based on electrophoresis in a three-dimensional (3-D) geometry. In contrast to conventional electrophoresis, samples are applied in a two-dimensional, planar array to one of the surfaces of a 3-D geometry separation medium. Loading onto a plane results in a very high sample capacity. Sample migration and separation occur along the third spatial dimension, which is perpendicular to the loading plane. The key problem of electrophoresis in a 3-D geometry separation setup is that temperature gradients are caused by Joule's heat, affecting the electrical conductivity and viscosity of the separation medium. A means of achieving straight sample migration under these circumstances is to force heat flow through the separation medium parallel to the axis of sample migration. This can be done by dissipating the heat via the electrode sides of the gel and blocking any other heat transfer. The separation of DNA and proteins by this method has been tested using agarose gel electrophoresis, polyacrylamide gel electrophoresis, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Data were acquired off-line by conventional staining methods as well as on-line by detection of laser-induced fluorescence. We describe how to excise samples from the separation medium for preparative purposes. Possible unique applications of this 3-D geometry electrophoresis separation method are also discussed.     

Ultrathin-layer sodium dodecyl sulfate gel electrophoresis of proteins: effects of gel composition and temperature on the separation of sodium dodecyl sulfate-protein complexes

This paper discusses the effects of gel composition and separation temperature on the migration properties of fluorescein-5-isothiocyanate-labeled protein molecular mass markers (ranging from 20 100 to 205 000 Da) in automated ultrathin-layer sodium dodecyl sulfate (SDS) gel electrophoresis. The separation mechanism with the agarose and composite agarose - linear polyacrylamide, agarose - hydroxyethyl cellulose, and agarose - polyethylene oxide matrices were all found to comply with the Ogston sieving model in the molecular mass range of the protein molecules investigated. Our temperature studies revealed that electrophoretic separation of SDS protein complexes is an activated process and, in pure agarose and in composite agarose hydroxyethyl cellulose and agarose - polyethylene oxide matrices that the separation requires increasing activation energy as a function of the molecular mass of the separated proteins. On the other hand, when linear polyacrylamide was used as composite additive, the activation energy demand of the separation decreased with increasing solute molecular mass. The sensitivity of the laser-induced fluorescent detection of the automated ultrathin-layer electrophoresis system was evaluated by injecting a series of dilutions of the markers and was found to be less than 2.5 ng/band for the fluorophore-labeled protein.     

Determination of the number and relative molecular mass of subunits in an oligomeric protein by two-dimensional electrophoresis Application to the subunit structure analysis of rat liver amidophosphoribosyltransferase

To determine simultaneously the relative molecular mass (M_r) of a native oligomeric protein, and the number and M_r of its subunits, a method using two-dimensional electrophoresis was developed. To determine the M_r of a native oligomeric protein, pore gradient gel electrophoresis was performed for the first dimension. Native proteins were dissociated into their subunits by sodium dodecyl sulphate (SDS) in a gel slice, then applied to SDS polyacrylamide gel electrophoresis for the second dimension to determine the M_r of subunits. The advantage, accuracy, limitations and application of the method are discussed.     

A multichannel gel electrophoresis and continuous fraction collection apparatus for high‐throughput protein separation and characterization

To facilitate a direct interface between protein separation by PAGE and protein identification by mass spectrometry, we developed a multichannel system that continuously collects fractions as protein bands migrate off the bottom of gel electrophoresis columns. The device was constructed using several short linear gel columns, each of a different percent acrylamide, to achieve a separation power similar to that of a long gradient gel. A “Counter Free‐Flow” elution technique then allows continuous and simultaneous fraction collection from multiple channels at low cost. We demonstrate that rapid, high‐resolution separation of a complex protein mixture can be achieved on this system using SDS‐PAGE. In a 2.5 h electrophoresis run, for example, each sample was separated and eluted into 48–96 fractions over a mass range of ～10–150 kDa; sample recovery rates were 50% or higher; each channel was loaded with up to 0.3 mg of protein in 0.4 mL; and a purified band was eluted in two to three fractions (200 μL/fraction). Similar results were obtained when running native gel electrophoresis, but protein aggregation limited the loading capacity to about 50 μg per channel and reduced resolution.     

Acid-labile surfactant improves in-sodium dodecyl sulfate polyacrylamide gel protein digestion for matrix-assisted laser desorption/ionization mass spectrometric peptide mapping

Mass spectrometry (MS) together with genome database searches serves as a powerful tool for the identification of proteins. In proteome analysis, mixtures of cellular proteins are usually separated by sodium dodecyl sulfate (SDS) polyacrylamide gel-based two-dimensional gel electrophoresis (2-DE) or one-dimensional gel electrophoresis (1-DE), and in-gel digested by a specific protease. In-gel protein digestion is one of the critical steps for sensitive protein identification by these procedures. Efficient protein digestion is required for obtaining peptide peaks necessary for protein identification by MS. This paper reports a remarkable improvement of protein digestion in SDS polyacrylamide gels using an acid-labile surfactant, sodium 3-[(2-methyl-2-undecyl-1,3-dioxolan-4-yl)methoxy]-1-propanesulfonate (ALS). Pretreatment of gel pieces containing protein spots separated by 2-DE with a small amount of ALS prior to trypsin digestion led to increases in the digested peptides eluted from the gels. Consistently, treatment of gel pieces containing silver-stained standard proteins and those separated from tissue extracts resulted in the detection of increased numbers of peptide peaks in spectra obtained by matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOFMS). Hence the present protocol with ALS provides a useful strategy for sensitive protein identification by MS.     

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis without a stacking gel: use for high sample throughput

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis without a stacking gel minimizes lateral spreading of protein when samples are applied in agarose wells and allows high sample throughput (6 samples/cm gel width). The method is simple and convenient to use and gives comparable resolution to the standard method with 4-20% or 6-30% polyacrylamide gradient gels. Best results are obtained when the upper zone of the separating gel is of low polyacrylamide concentration. This indicates a need for the molten agarose to penetrate and anneal with the separating gel.     

Preparative high-yield electroelution of proteins after separation by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and its application to analysis of amino acid sequences and to raise antibodies.

A method for the preparative high-yield electroelution of proteins from sodium dodecyl sulphate (SDS) polyacrylamide gel strips was established. The method consisted of SDS-polyacrylamide gel electrophoresis, detection of proteins with sodium acetate and electrophoretic elution at 200 V for 3 h by utilizing a horizontal flat-bed gel electrophoresis apparatus. Standard proteins with molecular masses of 14-66 kilodalton (cytochrome c, aldolase, ovalbumin and bovine serum albumin) were recovered with an average yield of 73.6 +/- 2.3%. A membrane-bound protein, rat skeletal muscle Ca(2+)-ATPase (100 kilodalton) was also well recovered (over 60%). This method was applicable to the purification of proteins required for N-terminal amino acid sequencing and to raise antibodies.