Oxidative reactivity difference among the metal oxo and metal hydroxo moieties: pH dependent hydrogen abstraction by a manganese(IV) complex having two hydroxide ligands

Clarifying the difference in redox reactivity between the metal oxo and metal hydroxo moieties for the same redox active metal ion in identical structures and oxidation states, that is, M(n+)O and M(n+)-OH, contributes to the understanding of nature's choice between them (M(n+)O or M(n+)-OH) as key active intermediates in redox enzymes and electron transfer enzymes, and provides a basis for the design of synthetic oxidation catalysts. The newly synthesized manganese(IV) complex having two hydroxide ligands, [Mn(Me(2)EBC)(2)(OH)(2)](PF(6))(2), serves as the prototypic example to address this issue, by investigating the difference in the hydrogen abstracting abilities of the Mn(IV)O and Mn(IV)-OH functional groups. Independent thermodynamic evaluations of the O-H bond dissociation energies (BDE(OH)) for the corresponding reduction products, Mn(III)-OH and Mn(III)-OH(2), reveal very similar oxidizing power for Mn(IV)O and Mn(IV)-OH (83 vs 84.3 kcal/mol). Experimental tests showed that hydrogen abstraction proceeds at reasonable rates for substrates having BDE(CH) values less than 82 kcal/mol. That is, no detectable reaction occurred with diphenyl methane (BDE(CH) = 82 kcal/mol) for both manganese(IV) species. However, kinetic measurements for hydrogen abstraction showed that at pH 13.4, the dominant species Mn(Me(2)EBC)(2)(O)(2), having only Mn(IV)O groups, reacts more than 40 times faster than the Mn(IV)-OH unit in Mn(Me(2)EBC)(2)(OH)(2)(2+), the dominant reactant at pH 4.0. The activation parameters for hydrogen abstraction from 9,10-dihydroanthracene were determined for both manganese(IV) moieties: over the temperature range 288-318 K for Mn(IV)(OH)(2)(2+), DeltaH(double dagger) = 13.1 +/- 0.7 kcal/mol, and DeltaS(double dagger) = -35.0 +/- 2.2 cal K(-1) mol(-1); and the temperature range 288-308 K for for Mn(IV)(O)(2), DeltaH(double dagger) = 12.1 +/- 1.8 kcal/mol, and DeltaS(double dagger) = -30.3 +/- 5.9 cal K(-1) mol(-1).     

Utilization of hydrogen bonds to stabilize M-O(H) units: synthesis and properties of monomeric iron and manganese complexes with terminal oxo and hydroxo ligands

Non-heme iron and manganese species with terminal oxo ligands are proposed to be key intermediates in a variety of biological and synthetic systems; however, the stabilization of these types of complexes has proven difficult because of the tendency to form oxo-bridged complexes. Described herein are the design, isolation, and properties for a series of mononuclear Fe(III) and Mn(III) complexes with terminal oxo or hydroxo ligands. Isolation of the complexes was facilitated by the tripodal ligand tris[(N'-tert-butylureaylato)-N-ethyl]aminato ([H(3)1](3-)), which creates a protective hydrogen bond cavity around the M(III)-O(H) units (M(III) = Fe and Mn). The M(III)-O(H) complexes are prepared by the activation of dioxygen and deprotonation of water. In addition, the M(III)-O(H) complexes can be synthesized using oxygen atom transfer reagents such as N-oxides and hydroxylamines. The [Fe(III)H(3)1(O)](2-) complex also can be made using sulfoxides. These findings support the proposal of a high valent M(IV)-oxo species as an intermediate during dioxygen cleavage. Isotopic labeling studies show that oxo ligands in the [M(III)H(3)1(O)](2-) complexes come directly from the cleavage of dioxygen: for [Fe(III)H(3)1(O)](2-) the nu(Fe-(16)O) = 671 cm(-1), which shifts 26 cm(-1) in [Fe(III)H(3)1((18)O)](2-) (nu(Fe-(18)O) = 645 cm(-1)); a nu(Mn-(16)O) = 700 cm(-1) was observed for [Mn(III)H(3)1((16)O)](2-), which shifts to 672 cm(-1) in the Mn-(18)O isotopomer. X-ray diffraction studies show that the Fe-O distance is 1.813(3) A in [Fe(III)H(3)1(O)](2-), while a longer bond is found in [Fe(III)H(3)1(OH)](-) (Fe-O at 1.926(2) A); a similar trend was found for the Mn(III)-O(H) complexes, where a Mn-O distance of 1.771(5) A is observed for [Mn(III)H(3)1(O)](2-) and 1.873(2) A for [Mn(III)H(3)1(OH)](-). Strong intramolecular hydrogen bonds between the urea NH groups of [H(3)1](3-) and the oxo and oxygen of the hydroxo ligand are observed in all the complexes. These findings, along with density functional theory calculations, indicate that a single sigma-bond exists between the M(III) centers and the oxo ligands, and additional interactions to the oxo ligands arise from intramolecular H-bonds, which illustrates that noncovalent interactions may replace pi-bonds in stabilizing oxometal complexes.     

Synthesis, characterization, and solution properties of a novel cross-bridged cyclam manganese(IV) complex having two terminal hydroxo ligands

A novel monomeric tetravalent manganese complex with the cross-bridged cyclam ligand 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (Me2EBC), [Mn(IV)(Me2EBC)(OH)2](PF6)2, was synthesized by oxidation of Mn(II)(Me2EBC)Cl2 with H2O2 in the presence of NH4PF6)in aqueous solution. The X-ray crystal structure determination of this manganese(IV) compound revealed that it contains two rare terminal hydroxo ligands. EPR studies in dry acetonitrile at 77 K show two broad resonances at g = 1.96 and 3.41, indicating that the manganese(IV) exists as a high-spin d3 species. Resonance Raman (rR) spectra of this manganese(IV) species reveal that the dihydroxy moiety, Mn(IV)(OH)2, is also the dominant species in aqueous solution (pH < 7). pH titration provides two pK(a) values, 6.86(4) and 10.0(1), associated with stepwise removal of the last two oxygen-bound protons from [Mn(IV)(Me2EBC)(OH)2](2+). The cyclic voltammetry of this manganese(IV) complex in dry acetonitrile at 298 K demonstrates two reversible redox processes at +0.756 and -0.696 V (versus SHE) for the Mn4+/Mn3+ and Mn3+/Mn2+ couples, respectively. This manganese(IV) complex is relatively stable in weak acidic aqueous solution but easily degrades in basic solution to manganese(III) derivatives with an 88 +/- 1% yield.     

Synthesis and crystal structure of a novel hexanuclear Zr(IV) complex with 1,10-phenanthroline including carboxylato,hydroxo, and oxo bridging

A novel hexanuclear Zr(IV) complex, [Zr₆(O)₆(OH)₂(Ph₂CHCOO)₁₀(phen)₂]·4CH₃CN (1), where phen denotes 1,10-phenanthroline, has been prepared and characterized on the basis of elemental analysis, infrared-spectroscopy measurements, and X-ray crystallography. Complex 1 resides on a crystallographic inversion center, thus making only three of the six zirconium ions unique. The six zirconium ions are arranged in apices of an octahedron. One Zr(IV) metal ion (Zr1) is individually joined with two Zr(IV) metal ions (Zr2, Zr3) by one syn–syn bridging carboxylate group, and Zr1 has three μ₃-O and one μ₃-OH bridges through Zr2 and Zr3. The Zr2 atom is also connected by one syn–syn bridging carboxylate group through Zr3*. Moreover, Zr1 is coordinated by two nitrogen atoms of a bidentate 1,10-phenanthroline group with eight coordination. Besides these, Zr2 is coordinated by one carboxylate of a bidentate–chelate type, completing the eight coordination. The Zr3 atom is coordinated by one monodentate carboxylate oxygen, consequently has a novel seven coordination.     

Theoretical study of the interaction between a high-valent manganese porphyrin oxyl-(hydroxo)-Mn(IV)-TMPyP and double-stranded DNA

Cationic porphyrin derivatives such as meso-tetrakis(4-N-methylpyridinium)porphyrin, TMPyP, have been shown to interact with double-stranded DNA. The manganese derivative, Mn(III)-TMPyP, activated by an oxygen donor like potassium monopersulfate, provides an efficient DNA-cleaving system. Previous experimental work1 has shown that DNA cleavage by the Mn(III)-TMPyP/KHSO(5) system was due to an oxidative attack, within the minor groove of B-DNA, at the C5' or C1' carbons of deoxyribose units. The aim of this study was to use molecular modeling to elucidate the specificity of the interactions between the transient active species oxyl-Mn(IV)-TMPyP and the DNA target. Geometric parameters, charges, and force field constants consistent with the AMBER 98 force field were calculated by DFT methods. Molecular modeling (mechanics and dynamic simulations) were performed for oxyl-(hydroxo)-Mn(IV)-TMPyP bound in the minor groove of the dodecamer d(5'-TCGTCAAACCGC)-d(5'-GCGGTTTGACGA). Geometry, interactions, and binding energy of the metalloporphyrin located at the A.T triplet region of the dodecamer were analyzed. These studies show no significant structural change of the DNA structure upon ligand binding. Mobility of the metalloporphyrin in the minor groove was restrained by the formation of a hydrogen bond between the hydroxo ligand trans to the metal-oxyl and a DNA phosphate, restricting the access of the oxyl group to the (pro-S) H atom at C5'.     

Structure and bonding in monomeric iron(III) complexes with terminal oxo and hydroxo ligands

We report on the structure and bonding in the title iron(III) complexes, containing the tris[(N'-tert-butylureayl)-N-ethyl]amine ligand, with density functional theory techniques. In agreement with the experimental data, a high-spin electronic state is favored for all of the systems we considered. H bonds between the terminal oxo and hydroxo ligands and NH groups present in the organic ligand coordinated to the metal have a remarkable effect on the overall coordination geometry. In fact, the structure of model complexes without H bonds shows shorter Fe-O bond lengths. This is a consequence of the ability of the H bonds to stabilize a remarkable amount of electron density localized on the terminal oxo and hydroxo ligands. Energy analysis indicates that each H bond stabilizes the nonheme complexes by roughly 35 kJ/mol. Molecular orbital analysis indicates a reduction of two Fe-O bonding electrons on going from a complex with a terminal oxo ligand to a complex with a terminal hydroxo ligand. This reduction in the number of bonding electrons is also supported by frequency analysis.     

The manganese(IV) oxide electrode as a manganese(II) sensor

Manganese(IV) oxide electrodes formed with a graphite/PTFE substrate are shown to have near-theoretical response to manganese(II) ions in pH-4 acetate medium and a sub-Nernstian response in 0.1M nitric acid medium. Lead and iron(III) ions interfere, and iron(II) ions even more so, but other bivalent transition metal ions have little effect. The main drawback of this type of electrode is its long response time (~ 20 min). Some attempts to use manganese(IV) oxide electrodes as the basis for phosphate electrodes by use of MnHPO(4).3H(2)O and MnNH(4)PO(4).H(2)O are also described.     

Two new terpyridine dimanganese complexes: a manganese(III,III) complex with a single unsupported oxo bridge and a manganese(III,IV) complex with a dioxo bridge. Synthesis, structure, and redox properties

Two new terpyridine dimanganese oxo complexes [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(CF(3)CO(2))(2)](+) (3) and [Mn(2)(III,III)(mu-O)(terpy)(2)(CF(3)CO(2))(4)] (4) (terpy = 2,2':6,2' '-terpyridine) have been synthesized and their X-ray structures determined. In contrast to the corresponding mixed-valent aqua complex [Mn(2)(III,IV)(mu-O)(2)(terpy)(2)(H(2)O)(2)](3+) (1), the two Mn atoms in 3 are not crystallographically equivalent. The neutral binuclear monooxo manganese(III,III) complex 4 exhibits two crystallographic forms having cis and trans configurations. In the cis complex, the two CF(3)CO(2)(-) ligands on each manganese adopt a cis geometry to each other; one CF(3)CO(2)(-) is trans to the oxygen of the oxo bridge while the second is cis. In the trans complex, the two coordinated CF(3)CO(2)(-) have a trans geometry to each other and are cis to the oxo bridge. The electrochemical behavior of 3 in organic medium (CH(3)CN) shows that this complex could be oxidized into its corresponding stable manganese(IV,IV) species while its reduced form manganese(III,III) is very unstable and leads by a disproportionation process to Mn(II) and Mn(IV) complexes. Complex 4 is only stable in the solid state, and it disproportionates spontaneously in CH(3)CN solution into the mixed-valent complex 3 and the mononuclear complex [Mn(II)(terpy)(2)](2+) (2), thereby preventing the observation of its electrochemical behavior.     

Oxidation of Naphthalene with a Manganese(IV) Bis(hydroxo) Complex in the Presence of Acid

Naphthalene oxidation with metal–oxygen intermediates is a difficult reaction in environmental and biological chemistry. Herein, we report that a Mn^IV bis(hydroxo) complex, which was fully characterized by various physicochemical methods, such as ESI‐MS, UV/Vis, and EPR analysis, X‐ray diffraction, and XAS, can be employed for the oxidation of naphthalene in the presence of acid to afford 1,4‐naphthoquinone. Redox titration of the Mn^IV bis(hydroxo) complex gave a one‐electron reduction potential of 1.09 V, which is the most positive potential for all reported nonheme Mn^IV bis(hydroxo) species as well as Mn^IV oxo analogues. Kinetic studies, including kinetic isotope effect analysis, suggest that the naphthalene oxidation occurs through a rate‐determining electron transfer process.     

Structural features of monomeric octahedral d 2 rhenium(V) oxo complexes with oxygen atoms in trans-positions to oxo ligands: Complexes with hydroxo ligands in trans-positions to O(oxo)

Some structural features of mononuclear octahedral rhenium(V) oxo complexes with oxygen atoms of hydroxo ligands in trans-positions to multiply bonded oxo ligands are considered. The complexes contain monodentate inorganic or organic ligands or bi- and tetradentate organic ligands in the equatorial plane.     

New linear high-valent tetranuclear manganese-oxo cluster relevant to the oxygen-evolving complex of photosystem II with oxo, hydroxo, and aqua coordinated to a single Mn(IV)

An unprecedented atom connectivity, MnIV(mu-O)MnIV(mu-O)2MnIV(mu-O)MnIV, is found in the complex [MnIV4O4(EtO-terpy)4(OH)2(OH2)2](ClO4)(6).8H2O (EtO-terpy=4'-ethoxyl-2,2':6',2' '-terpyridine), which has been characterized by X-ray crystallography, X-ray powder diffraction, EPR spectroscopy, and magnetic studies. This complex is the first example of a compound where a MnIV ion is coordinated by all three types of water-derived ligands: oxo, hydroxo, and aqua. Bond distances and angles for this complex are consistent with a MnIV4 oxidation state assignment. The di-mu-oxo- and mono-mu-oxo-bridged Mn-Mn distances are 2.80 and 3.51 A, respectively. The variable-temperature magnetic susceptibility data for this complex, in the range of 10-300 K, are consistent with an S=0 ground state and were fit using the spin Hamiltonian HHDvV=-J1S2S1-J2S1S1A-J1S1AS2A (S1=S1A=S2=S2A=3/2) with J1=-432 cm-1 and J2=-164 cm-1 (where J1 and J2 are exchange constants through the mono-mu-oxo and the di-mu-oxo bridges, respectively). The first excited spin state of this tetramer is a spin triplet state at 279 cm-1 above the diamagnetic ground state. The next spin states are the S=1 and S=2 levels at about 700 and 820 cm-1 above the S=0 ground state, respectively. These large energy gaps are consistent with the absence of an EPR signal for this complex, even at high temperature.     

Oxidation chemistry of uranium(III) complexes of Tpa: synthesis and structural studies of oxo,hydroxo, and alkoxo complexes of uranium(IV)

The crystal structure of the complex [U(tpa)(2)]I(3), 1 (tpa = tris[(2-pyridyl)methyl]amine), has been elucidated. The complex exists as only one enantiomer in the crystal leading to the chiral space group P2(1)2(1)2(1). The coordination geometry of the metal can be described as a distorted cube. Accidental oxidation of [U(tpa)(2)]I(3) led to the isolation of the unusual mononuclear bishydroxo complex of uranium(IV) [U(tpa)(2)(OH)(2)]I(2).3CH(3)CN, 2, which was structurally characterized. The controlled reaction of [U(tpa)(2)]I(3) with water resulted in the oxidation of the metal center and led to the formation of protonated tpa and of the trinuclear U(IV) oxo complex ([U(tpa)(mu-O)I](3)(mu(3)-I))I(2), 3. The solid state and solution structures of this trimer are reported. The pathway suggested for the formation of this complex is the oxidation of the [U(tpa)(2)]I(3) complex by H(2)O to form a U(IV) hydroxo complex which then decomposes, eliminating mono-protonated tpa. The comparison with the reported reaction with water of cyclopentadienyl derivatives points to a higher reactivity toward water reduction of the bis(tpa) complex with respect to the cyclopentadienyl derivatives. The reaction of U(III) with methanol in the presence of the supporting ligand tpa leads to formation of alkoxo complexes similarly to what is found for amide or cyclopentadienyl derivatives. The monomethoxide complex [U(tpa)I(3)(OMe)], 4, has been prepared in good yield by alcoholysis of the U(III) mono(tpa) complex. The crystal structure of this complex has been determined. The reaction of [U(tpa)(2)]I(3) with 2 equiv of methanol in acetonitrile allows the isolation of the bismethoxo complex of U(IV) [U(tpa)I(2)(OMe)(2)], 5, in 35-47% yield, which has been fully characterized. To account for the oxidation of U(III) to U(IV) the suggested mechanism assumes that hydrogen is evolved in both reactions.     

Ab initio study of the comparative stability of ruthenium(VI) and osmium(VI) oxo hydroxo complexes with different coordination numbers

The comparative stability of oxohydroxoruthenium(VI) and oxohydroxoosmium(VI) anions with different coordination numbers has been calculated by the relativistic density functional theory method with inclusion of spin-orbit coupling. In line with experimental data, the computations point to the stability of the ruthenium complex RuO₃(OH) ₂ ^2? ? with CN = 5, whereas osmium is stabilized in a six-coordinate environment (OsO₂(OH) ₄ ^2? ). The spin state of the stable Ru complex is close to triplet and that of the Os complex, to singlet.     

Studies on binuclear hydroxo/carboxylato-bridged manganese(III) complexes and a mononuclear manganese(III) complex involving salen type ligands

Synthesis of six hydroxo-bridged binuclear manganese(III) complexes of formulae [MnL-X-MnL](ClO₄) [X = OH (1–6)] along with a mononuclear manganese(III) complex (7) [Mn(L)(L′)(MeOH)₂] [HL′ = 2-(2-hydroxy-phen-yl)benzimidazole] and two carboxylate-bridged binuclear manganese(III) complexes (8) and (9) are described. The complexes have been characterized by the combination of i.r., u.v.-vis spectroscopy, magnetic moments and by their redox properties. The electronic spectra of all the complexes exhibit almost identical features consisting of two d–d bands at ca. 550 and 600 nm, one MLCT band at ca.400 nm, together with two π–π^* intra-ligand transitions at ca. 250 nm and ca.300 nm. Room temperature magnetic data range from μ = 2.7–3.0 BM indicates some super-exchange between the binuclear metal centers via bridging hydroxo/carboxylato groups. The X-ray crystal structure of the binuclear complex (5) revealed that it has a symmetric Mn^IIIN₂O₂ core bridged by a hydroxyl group. The X-ray analysis of the mononuclear complex (7) showed that the manganese-center possesses a distorted octahedral geometry. Electrochemical properties of hydroxo-bridged manganese(III) complexes (1–6) show identical features consisting of an irreversible and a quasi-reversible reduction corresponding to the Mn₂^III → Mn^IIMn^III → Mn^IIMn^II couples in the voltammogram. It was found that electron withdrawing substituents on the ligand result in easier reduction. Complex (7) displays an irreversible reduction at 0.08 V and a reversible oxidation at 0.45V assignable to the Mn^III → Mn^II reduction and Mn^III → Mn^IV oxidation, respectively. The carboxylate-bridged compound (8) exhibits two irreversible oxidations at 0.4 and 0.6 V, probably due to Mn₂^III → Mn^IIIMn^IV → Mn^IVMn^IV oxidations and shows a quasi-reversible reductive wave at −0.85 V, tentatively assigned to Mn₂^III → Mn^IIMn^III reduction.     

Olefin oxygenation by the hydroperoxide adduct of a nonheme manganese(IV) complex: epoxidations by a metallo-peracid produces gentle selective oxidations

The reactive intermediates and mechanisms of oxygenation of olefins by manganese complexes were investigated by treating olefins with newly synthesized [MnIV(Me2EBC)(OH)2](PF6)2 in the presence and absence of peroxide and by studying its catalytic epoxidation reaction in normal aqueous solution and, individually, with isotopically labeled H218O, 18O2, and H218O2. The manganese oxo species is not the reactive intermediate for the oxygen transfer process mediated by this manganese complex. A novel manganese(IV) peroxide intermediate, MnIV(Me2EBC)(O)(OOH)+, was captured by mass spectrometry and is proposed as the intermediate that oxygenates olefins in this catalytic system.     

Determination of thiourea and some of its organic derivatives with sodium vanadate, hexacyanoferrate(III), Cerium(IV) sulphate, manganese(III) and manganese(IV)

The determination of thiourea and some of its organic derivatives with sodium vanadate, hexacyanoferrate(III), cerium(IV) sulphate, manganese(III) and manganese(IV) is described. A mixture of iodate and iodide is used as catalyst. Ferroin, N-phenylanthranilic acid and p-ethoxychrysoidine can be used as indicators.     

Synthesis and electrochemical characterisation of a near infrared absorbing oxo vanadium(IV) octapentylthio-phthalocyanine

The synthesis of an α-substituted phthalocyanine oxo vanadium(IV) 1,4,8,11,15,18,22,25-octapentathiophthalocyanine (4) which absorbs at 850 nm in dichloromethane is reported. The complex is purple in colour and becomes green on reduction. The cyclic and square wave voltammetries of the complex show five redox couples. The spectroelectrochemical data showed only ring based processes. The ring reduced species is observed at wavelengths greater than 680 nm rather than the usual 500–600 nm range typical of ring reduced phthalocyanine complexes.