Comparison of capillary electrophoretic techniques for analysis and characterization of metallothioneins

To explore and understand the significance of individual metallothionein isoforms, the methods of their identification are needed. Separation of these isoforms requires a high resolution technique which can exploit very small differences in mass, charge, and hydrophobicity. In this report, three different techniques of CE were analyzed and used for metallothionein separation: detection using capillary gel electrophoresis, capillary zone electrophoresis, and capillary isoelectric focusing. Also, three different metallothionein samples were used from horse kidney, rabbit liver, and human liver. We identified metallothionein isoforms based on the determination of their relative molecular masses, on the charge differences in different pH buffers, and based on the pI value. Methods used in this report allow metallothionein identification, permit to quantify the purity and content of its isoforms, and allow studying its polymerization. This report supports and endorses the increased application of CE methodology in proteomics.     

Effects of redox conditions and zinc(II) ions on metallothionein aggregation revealed by chip capillary electrophoresis

Metallothioneins (MTs) belong to cysteine-rich proteins with unique higher structure. One of the most known MT's functions is metals detoxification and maintaining their homeostasis in a cell. Structure of MT with naturally occurred zinc(II) ions can be affected by concentration of metal ions as well as redox milieu inside a cell, however the exact explanation and biochemical effects of the structural changes are still missing. In this study we used capillary electrophoresis on chip coupled with fluorescence detection to determine structural changes of MT with increasing concentration of zinc(II) ions and under various redox conditions. To investigate the structural-dependent effects, reduced and/or oxidized apo-MT (MT without natural occurred metal ion) was prepared. Zinc binding into reduced and/or oxidized apo-MT was compared. MT was incubated with 0, 5, 15, 25, 50 and 100 μM ZnCl₂ for 1 h in 37 °C. Formation of MT aggregates with increasing zinc concentration was observed by spectrophotometry, chip capillary electrophoresis, and SDS-PAGE. We found out that reduced MT forms aggregates more readily compared to oxidized MT. Using the chip capillary electrophoresis allowed us relative quantification of MT aggregation as a decrease in the area of the signal corresponding to the monomer form of MT (Mw 15 kDa, migration time 26.5 s) and its ratio to total signal (sum of all signals measured by the electrophoresis). The dependences had an exponential character with equation y = 2.4 × e^−0.01x, R² = 0.945 for 15 kDa peak area and y = 0.11 × e^−0.01x, R² = 0.938 for decrease of 15 kDa peak area ratio to the total signal. Zn–MT interaction was 30% faster during the first 15 min and 50% faster during the whole experiment for reduced MT. It can be concluded that formation of MT aggregates is dependent on redox state and Zn(II) concentration.     

Using of chicken antibodies for metallothionein detection in human blood serum and cadmium‐treated tumour cell lines after dot‐ and electroblotting

Metallothionein (MT) is a low‐molecular mass protein playing an essential role in homeostasis of heavy metal ions. Its relation with formation and progression of a tumour disease is discussed in this article. Here, we propose a new methodological approach for visualization of MT on PVDF membranes after dot‐ and electroblotting by using a commercial mouse monoclonal antibody E9 and polyclonal chicken antibodies. The optimized procedure was as follows. We dotted 1 μL sample volume on PVDF membrane and let it to dry. Then, we blocked the membrane surface with 2% BSA in PBS for 30 min. After that, the membrane was incubated in chicken primary antibody (diluted 1:500), washed, and incubated in rabbit‐anti‐chicken secondary antibody conjugated with horseradish peroxidase. To visualize the interaction, we used 3‐aminoethyl‐9‐carbazole. Under these conditions, we estimated detection limit as 3 pg of MT per 1 μL. The optimal approach was further utilized for detection of MT level in two human fibroblast cell lines and in blood serum obtained from children with medulloblastoma. The results were in good agreement with differential pulse voltammetry‐Brdicka reaction.     

Improved separation of metallothionein isoforms by the presence of cyclodextrin in capillary zone electrophoresis

Capillary zone electrophoresis (CZE) with cyclodextrin (CD) in the polyacrylamide-coated capillary was used to study metallothionein (MT) forms in the horse kidney preparation produced commercially by Sigma. It is known that CDs form complexes with hydrophobic amino acids. The results show that the presence of CD improves the separability of the various MT forms, including the MT-IA and the MT-IB forms, metallothionein aggregates, as well as the so far unidentified a and b forms. This was true both below and above the isoelectric points (pIs), although the migration times were somewhat longer at increasing CD concentrations for runs at constant voltage than with constant current.     

Flavonoids biosynthesis in plants and its further analysis by capillary electrophoresis

Flavonoids represent an important bioactive component in plants. Accumulation of flavonoids often occurs in plants subjected to abiotic stresses, including the adaptation of plants to the environment and in overcoming their stress conditions. This fact makes their analysis and determination an attractive field in food science since they can give interesting information on the quality and safety of foods. In this study, we discuss reports on plants flavonoids biosynthesis against abiotic stresses and advances in analytical capillary electrophoresis used for their identification and quantification in plants.     

Development of a fast and simple immunochromatographic method to purify alpha 1-acid glycoprotein from serum for analysis of its isoforms by capillary electrophoresis

Alpha 1-acid glycoprotein (AGP) is a very heterogeneous glycoprotein presenting several isoforms due to variations in its polypeptidic and glycosidic moieties. Differences in AGP isoforms between healthy and diseased individuals have been related to different pathological situations such as cancer or cardiovascular diseases, among others. Capillary electrophoresis study of the role of AGP isoforms as biomarkers requires prior purification of AGP from biological samples. Current AGP purification methods are time- and labour-consuming, and generally they have not been proven to be compatible with capillary electrophoresis analysis. In this work, different methods for AGP purification from human serum are developed and compared. The applicability of acidic precipitation and immunoaffinity chromatographic methods for AGP purification are studied. Two different immunoaffinity approaches are employed; in the first one, interferents present in the AGP sample are captured and removed, and in the second one, AGP is retained in a house-made anti-AGP column, being in this way isolated from the rest of interferents of the sample. Best results in AGP purification from human serum to be analyzed by capillary zone electrophoresis (CZE) were obtained when acidic purification was combined with immunoaffinity chromatography (IAC) employing the house-made anti-AGP column. The method was shown not to alter the proportion of AGP peaks due to isoforms existing in AGP samples. The applicability of this fast and easy purification method developed for analyzing by CZE isoforms of AGP from natural serum samples by CZE is demonstrated.     

毛细管电泳法表征多肽及糖蛋白的稳定性

建立了毛细管电泳表征多肽和糖蛋白稳定性的方法。分别以血管紧张素II(Ang II)和植物血球凝集素(PHA)、牛凝血酶(B-Thr)、人凝血酶(H-Thr)、辣根过氧化物酶(HRP)4种糖蛋白为多肽和糖蛋白的模式分子。从样品浓度、电泳缓冲液、样品溶液pH和离子强度等方面优化了血管紧张素II的分离分析条件;从毛细管的选择、样品的电荷状态、电泳缓冲液的选择和分离电压的影响等方面讨论了糖蛋白的分离条件。Ang II和4种糖蛋白的稳定性试验结果表明:Ang II可在pH 7.4的硼酸盐缓冲液(0.02 mol/L)中于4℃下稳定放置48 h; 4种糖蛋白可在pH 7.4硼酸盐缓冲液(0.2 mol/L)中于20,4,-20℃下稳定放置48 h;放置时间大于一周且小于四周时,在-20℃下各蛋白质均保持稳定;放置时间大于两周且小于四周时,只有HRP在上述3个温度下均保持稳定。该方法具有高效、快速、简单、低成本的特点,可广泛应用于多肽和蛋白质的稳定性表征。     

Monitoring of transferrin isoforms in biological samples by capillary electrophoresis

Work dealing with the monitoring of transferrin isoforms in human serum and other body fluids by capillary electrophoresis is reviewed. It comprises capillary zone electrophoresis and capillary isoelectric focusing efforts that led to the exploration and use of assays for the determination of carbohydrate‐deficient transferrin as a marker for excessive alcohol intake, genetic variants of transferrin, congenital disorders of glycosylation and β‐2‐transferrin, which is a marker for cerebrospinal fluid leakage. This paper provides insight into the development, specifications, strengths, weaknesses, and routine use of the currently known capillary electrophoresis based assays suitable to detect transferrin isoforms in body fluids. The achievements reached so far indicate that capillary zone electrophoresis is an attractive technology to monitor the molecular forms of transferrin in biological specimens as the assays do not require an elaborate sample pretreatment and thus can be fully automated for high‐throughput analyses on multicapillary instruments. Assays based on capillary isoelectric focusing are less attractive. They require immunoextraction of transferrin from the biological matrix and mobilization after focusing if instrumentation with a whole‐column imaging detector is not available. Interactions of the carrier ampholytes with the iron of transferrin may prevent iron saturation and thus provide more complicated isoform patterns.     

Simultaneous determination of polyamines and acetylpolyamines in human urine by capillary electrophoresis with fluorescence detection

There has been evidence linking elevated polyamines (PAs) and acetylpolamines (AcPAs) level and cancer. So the simultaneous analysis of these compounds has become important task for cancer diagnosis and antitumor drug monitoring. A simple, fast and inexpensive CZE‐LIF method has been developed for the determination of cadaverine (CAD), putrescine (PUT), spermine (SPM), spermidine (SPD), acetylspermine (ASPM), and acetylspermidine (ASPD) in human urine using 4‐chloro‐7‐nitro‐2,1,3‐benzooxadiazole as a fluorescent reagent. Labeling reaction conditions were systematically investigated and were found to be 20 mM borate buffer at pH 7.4, labeling reaction time, and temperature were 10 min and 70°C, respectively. Under these optimized conditions the four PAs, two AcPAs and the internal standard were separated in 6 min. An Exactive‐MS with an ESI source was used for identification of the bis‐derivative of the ASPM. The method was validated in term of linearity, LODs, repeatability, intra‐ and interday assays, recovery, and selectivity. The LODs for CAD, PUT, SPM, SPD, ASPM, and ASPD were found to be 7.6, 10.0, 9.0, 8.8,7.8, and 3.3 nM, respectively. The method was successfully applied for the analysis of PAs and AcPAs in healthy human urine samples.     

Characterization of sepia ink in ancient graphic documents by capillary electrophoresis

A simple and rapid capillary electrophoresis with diode array detection method was developed for sepia ink identification in ancient graphic documents.Separation was performed in a fused-silica capillary (64.5 cm length, 50 μm i.d.). The running buffer was 20 mM sodium tetraborate solution, pH 9.2. The applied potential was 25 kV, temperature 25 °C and detection was at 220 nm. An appropriate extraction procedure was applied for the take and treatment of sample from the reference substances and ancient graphic documents. This method was successfully applied to the collection of drawings and maps from the Royal Chancellery Archives of Granada (Spain).     

A study of interactions between bacteria and antibiotics by capillary electrophoresis

To assess the bacteria–antibiotic interactions in patients with postoperative wound infections, a simple electrophoretic test was performed. To estimate the effectiveness of the antibiotic therapy and to prepare 3‐day profiles of bacteria “quantity” in biological samples, CE was used. As our team demonstrated earlier, the method is easy and fast, sample pretreatment is not necessary, and it is characterized by high selectivity. Finally, the statistically optimal and significant results of the CZE test analysis for detection of Escherichia coli cells was established for migration time lower than 3.5 min. The obtained sensitivity and specificity amounted to 89.5 and 100%, respectively. It is the first application of CZE in the study of medical therapy.     

Determination of diastereoisomeric alkaloids in urine by capillary electrophoresis with electrochemiluminescence detection

A new and simple capillary electrophoresis with electrochemiluminescence detection was developed for the separation and the quantification of a pair of diastereoisomenc alkaloids（ephedrine and pseudoephedrine）.The limits of detection（S/N = 3） were 4.5×10^-8 mol/L for ephedrine and 5.2×10^-8 mol/L for pseudoephedrine,respectively.The RSDs of migration time and peak area were less than 1.3 and 2.5%（n = 5）,respectively.The applicability of the propose method was illustrated in the determination of ephedrine and pseudoephedrine in human urine,ephedrine in nasal drops,and the monitoring of pharmacokinetics for pseudoephedrine.     

毛细管电泳在手性化合物分离分析中的研究进展

手性化合物的对映异构体往往表现出不同的生理活性,因此建立手性化合物的有效分离分析方法具有重要意义。毛细管电泳(CE)是一种分离效率高、分析速度快、样品用量少、分离模式灵活多样的分离分析方法,在手性化合物的分离和检测领域应用广泛。该文主要综述了2017～2019年CE在手性分离分析方面的最新进展,并对其未来的发展趋势进行了展望。     

应用移动反应界面富集技术进行毛细管电泳尿液指纹分析

快速灵敏的尿液指纹图谱分析对于临床诊断中发现新的生物标记至关重要。该文建立了一种简便、快速、灵敏的移动反应界面(MRB)介导的富集技术进行毛细管电泳尿液指纹图谱分析。MRB由25 mmol/L甘氨酸（Gly）-HCl（pH 2.5）作为样品缓冲液和50 mmol/L Gly-NaOH（pH 12.3）作为电泳缓冲液形成。与常规的毛细管区带电泳只能观察到尿液中不到10个峰相比,采用MRB可以观察到超过80个峰并将检测灵敏度提高了至少十几倍,显示该方法对于代谢组学分析具有重要的意义。     

A novel method developed for acetylcholine detection in royal jelly by using capillary electrophoresis coupled with electrogenerated chemiluminescence based on a simple reaction

A novel method for highly sensitive detection of acetylcholine in royal jelly was proposed by using CE coupled with electrogenerated chemiluminescence (ECL). Acetylcholine, which could not react with Tris(2,2′‐bipyridine)ruthenium(II) to strengthen its ECL signals, decomposed into trimethylamine and strengthened the ECL signals sharply when it was heated to its melting point. This reaction needed no additional reagent and it was mild, simple, stable and rapid, without any side reaction. By combining the above process with CE separation technique, trimethylamine in royal jelly was completely separated from interfering substances and was successfully detected within 4 min. The limit of detection for acetylcholine was found to be 6.3×10^?8 g/mL with a signal‐to‐noise ratio of 3:1. Acetylcholine in the royal jelly was detected to be 912±58 μg/g. The recoveries of acetylcholine chloride in the sample were in the ranges of 92–106%. The coefficients of variation for intra‐day and inter‐day reproducibility were equal to or less than 4.9 and 6.8%, respectively.     

Simultaneous determination of atropine,scopolamine, and anisodamine in Flos daturae by capillary electrophoresis using a capillary coated by graphene oxide

A novel CE method was developed for the separation and determination of three main tropane alkaloids in Flos daturae with a capillary coated by graphene oxide (GO). The GO‐coated capillary was characterized by SEM, energy dispersive X‐ray spectroscopy, and Raman spectroscopy, and the results indicated that the inner surface of the capillary was partially coated by GO. A phosphate solution (40 mM, pH7.0) containing 20% v/v methanol and 30% v/v acetonitrile was used as the running buffer for the analysis of the atropine, scopolamine, and anisodamine. The linear ranges of atropine, scopolamine, and anisodamine was 0.5–200 μg/mL with satisfactory correlation coefficients (R²) > 0.9987, and this novel method provided an efficient separation for three tropane alkaloids as well as a good reproducibility and stability. Finally, the method was successfully applied for the determination of these three tropane alkaloids in plant extracts.     

Characterization and separation of semiconductor quantum dots and their conjugates by capillary electrophoresis

Semiconductor quantum dots (QDs) are very important luminescent nanomaterials with a wide range of potential applications. Currently, QDs as labeling probes are broadly used in bioassays, including immunoassay, DNA hybridization, and bioimaging, due to their excellent physical and chemical properties, such as broad excitation spectra, narrow and size‐dependent emission profiles, long fluorescence life time, and good photostability. The characterization of QDs and their conjugates is crucial for their wide bioapplications. CE has become a powerful tool for the separation and characterization of QDs and their conjugates. In this review, some CE separation models of QDs are first introduced, mainly including CZE, CGE, MEKC, and ITP. And then, some key applications, such as the measurements of size, surface charge, and concentration of QDs and the characterization of QDs conjugates (e.g. QD–protein, QD–DNA, QD–small molecule), are also described. Finally, future perspectives are discussed.     

Quantitative enantiomeric analysis of chlorcyclizine,hydroxyzine, and meclizine by capillary electrophoresis

A simple capillary zone electrophoresis method was developed for the quantitative enantiomeric analysis of piperazine antihistamines with teratogenic suspicion in animals. Enantioseparation of chlorcyclizine, hydroxyzine, and meclizine was performed in glycine buffer (0.6 mol L^-1; pH 3.00) with sulfated -cyclodextrin (5 mg mL^-1) as a chiral selector; and the separated drugs were monitored by ultra-violet detector. The lower quantitation of the individual enantiomer is attainable at 10 µmol L^-1, using an achiral piperazine drug (cyclizine) as internal standard. The method is simple and rapid with a short run time (<5 min) for the analysis of chlorcyclizine, hydroxyzine or meclizine enantiomers.