Surface-initiated, ring-opening metathesis polymerization: formation of diblock copolymer brushes and solvent-dependent morphological changes

In this article, we report the formation of diblock copolymer brushes on a gold surface by surface-initiated, ring-opening metathesis polymerization (SI-ROMP) with the newly developed ruthenium catalyst [(H2IMes)(3-Br-py)2(Cl)2Ru=CHPh]. Taking advantage of the highly improved activity of the ruthenium catalyst and the rapid initiation step of ROMP, we successfully formed thin films of well-defined block copolymers with 5-norbornene-2-endo,3-endo-dimethanol and norbornene carboxylic acid methyl esters (44:56 endo/exo). The catalyst was found to be active enough to polymerize endo isomers of norbonene derivatives from the surface as well as to form diblock copolymer brushes. SI-ROMP of diblock copolymers from the surface was confirmed by ellipsometry, infrared spectroscopy, and X-ray photoelectron spectroscopy. After the formation, the polymer-grafted substrates were immersed in various solvents, and the selective swelling characteristics of polymer brushes were investigated by atomic force microscopy.     

Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization

Herein we demonstrated the preparation of 3,4-ethylenedioxythiophene (EDOT) containing polynorbornylene brushes on Au surfaces via surface-initiated ring-opening metathesis polymerization (SI-ROMP). Using solid-state oxidative crosslinking technique, these polymer brushes were electrochemically converted to conjugated polymer networks. Grazing-angle FTIR spectra of polymer brushes clearly showed the characteristic vibrations of EDOT and norbornylene groups. Furthermore, densely covered Au substrates with polynorbornylene brushes were characterized by using scanning electron microscopy and atomic force microscopy.     

Fabrication of silver-coated silica microspheres through mussel-inspired surface functionalization

This paper reports a droplet-based microfluidic device composed of patterned co-planar electrodes in an all-in-a-single-plate arrangement and coated with dielectric layers for electrowetting-on-dielectric (EWOD) actuation of discrete droplets. The co-planar arrangement is preferred over conventional two-plate electrowetting devices because it provides simpler manufacturing process, reduced viscous drag, and easier liquid-handling procedures. These advantages lead to more versatile and efficient microfluidic devices capable of generating higher droplet speed and can incorporate various other droplet manipulation functions into the system for biological, sensing, and other microfluidic applications. We have designed, fabricated, and tested the devices using an insulating layer with materials having relatively high dielectric constant (SiO(2)) and compared the results with polymer coatings (Cytop) with low dielectric constant. Results show that the device with high dielectric layer generates more reproducible droplet transfer over a longer distance with a 25% reduction in the actuation voltage with respect to the polymer coatings, leading to more energy efficient microfluidic applications. We can generate droplet speeds as high as 26 cm/s using materials with high dielectric constant such as SiO(2).     

Dielectric and pyroelectric properties of disubstituted diacetylenes

The dielectric and pyroelectric properties of monomer and polymer single crystals of substituted diacetylenes carrying polar side groups are presented for four examples: NP/4-MPU, TS/FBS, DNP and IPUDO. Large and anisotropic permittivities are generally observed. The symmetrically disubstituted diacetylenes IPUDO and DNP show spontaneous electric polarization despite of their symmetric molecular unit in polymer and/or monomer crystals at room or low temperature, respectively. Polar crystals of the unsymmetrically substituted diacetylenes NP/4-MPU and TS/FBS can be grown from appropriate solvents. However, polymorphism is an obstacle to a systematic tailoring of dielectric properties of diacetylene single crystals.     

颗粒填充聚合物高介电复合材料

颗粒填充聚合物高介电复合材料兼具聚合物材料的易加工、低损耗、耐击穿性能和陶瓷材料的高介电等性能,还可使金属材料具备介电性能,可以广泛应用于电气、电子行业。本文综述了非均匀体系介电理论研究的历史背景,以及陶瓷、金属颗粒填充聚合物高介电复合材料的组成、制备及介电性能的影响因素,并着重讨论了界面相在复合材料研究中的重要性,最后展望了发展方向。     

Polarizability and complex conductivity of dilute suspensions of spherical colloidal particles with uncharged (neutral) polymer coatings

The polarizability of polymer-coated colloidal particles, as measured via dielectric relaxation spectroscopy, reflects on the degree to which convection, diffusion, and electromigration deform the equilibrium double layer. With a polymer coating, convection and electro-osmosis are resisted by hydrodynamic drag on the polymer segments. The electro-osmotic flow near the underlying bare surface is therefore diminished. Characteristics of the particles and the adsorbed polymer can, in principle, be inferred by measuring the frequency-dependent polarizability. In this work, "exact" numerical solutions of the electrokinetic equations are used to examine how adsorbed polymer changes the particle polarizability and, hence, the conductivity and dielectric constant increments of dilute suspensions. For neutral polymer coatings, the conductivity and dielectric constant increments are found to be very similar to those of the underlying bare particles, so the response depends mostly on the underlying bare particles. These observations suggest that dielectric spectroscopy is best used to determine the underlying surface charge, with characteristics of the coating inferred from the electrophoretic or dynamic mobility, together with the hydrodynamic radius obtained from sedimentation or dynamic light scattering. Addressed briefly are the effects of added counterions and nonspecific adsorption. The electrokinetic model explored in this work can be used to guide experiments (frequency and ionic strength, for example) to either minimize or maximize the sensitivity of the complex conductivity to the coating thickness or permeability.     

Biomimetic membranes with aqueous nano channels but without proteins: impedance of impregnated cellulose ester filters

Earlier we have shown that many important properties of ionic aqueous channels in biological membranes can be imitated using simple biomimetic membranes. These membranes are composed of mixed cellulose ester-based filters, impregnated with isopropyl myristate or other esters of fatty acids, and can be used for high-throughput drug screening. If the membrane separates two aqueous solutions, combination of relatively hydrophilic polymer support with immobilized carboxylic groups results in the formation of thin aqueous layers covering inner surface of the pores, while the pore volume is filled by lipid-like substances. Because of these aqueous layers biomimetic membranes even without proteins have a cation/anion ion selectivity and specific (per unit of thickness) electrical properties, which are similar to typical properties of biological membranes. Here we describe frequency-dependent impedance of the isopropyl myristate-impregnated biomimetic membranes in the 4-electrode arrangement and present the results as Bode and Nyquist diagrams. When the membranes are placed in deionized water, it is possible to observe three different dispersion processes in the frequency range 0.1 Hz to 30 kHz. Only one dispersion is observed in 5 mM KH(2)PO(4) solution. It is suggested that these three dispersion features are determined by (a) conductivity in aqueous structures/channels, formed near the internal walls of the filter pores at high frequencies, (b) dielectric properties of the whole membrane at medium frequencies, determined by polymer support, aqueous layers and impregnating oil, and, finally, (c) by the processes in hydrated liquid crystal structures formed in pores by impregnating oil in contact with water at low frequencies.     

AFM,ellipsometry, XPS and TEM on ultra-thin oxide/polymer nanocomposite layers in organic thin film transistors

Here we report on the fabrication and characterization of ultra-thin nanocomposite layers used as gate dielectric in low-voltage and high-performance flexible organic thin film transistors (oTFTs). Reactive sputtered zirconia layers were deposited with low thermal exposure of the substrate and the resulting porous oxide films with high leakage currents were spin-coated with an additional layer of poly-α-methylstyrene (PαMS). After this treatment a strong improvement of the oTFT performance could be observed; leakage currents could be eliminated almost completely. In ellipsometric studies a higher refractive index of the ZrO₂/PαMS layers compared to the “as sputtered” zirconia films could be detected without a significant enhancement of the film thickness. Atomic force microscopy (AFM) measurements of the surface topography clearly showed a surface smoothing after the PαMS coating. Further studies with X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) also indicated that the polymer definitely did not form an extra layer. The polymer chains rather (self-)assemble in the nano-scaled interspaces of the porous oxide film giving an oxide–polymer “nanocomposite” with a high oxide filling grade resulting in high dielectric constants larger than 15. The dielectric strength of more than 1 MV cm⁻¹ is in good accordance with the polymer-filled interspaces.     

Defect-free polymer multilayers prepared via chemoselective immobilization

In this paper, we investigated electrochemical properties of polymer multilayers on gold substrates using impedance spectroscopy. The multilayer was prepared by chemoselective ligation between aldehyde- and oxyamine-functionalized polymers via a layer-by-layer approach. The impedance spectra in a buffer solution in the absence of redox species revealed the formation of highly impermeable and defect-free films. The dielectric thickness of the polymer film, which is proportional to the reciprocal of capacitance, linearly increased as the number of deposition layer increased. The defect area of the polymer multilayer was obtained using the faradaic impedance with redox species. The surface coverage of eight polymer layers was determined to be 99.99%. Thus, the layer-by-layer deposition via chemoselective ligation offers a new way to prepare a highly insulating and defect-free polymer layer with finely tunable capacitance as a function of the number of deposition layers.     

用聚合物乳液粒子构造纳米孔隙超低反射表面

由于粒子堆积膜的孔隙率有限,用聚合物乳液直接组装的纳米孔隙膜在膜厚和折射率的调节能力方面都受到限制,需要可以单独调控粒子膜孔隙率的手段.将聚甲基丙烯酸甲酯(PMMA)和聚苯乙烯(PS)的二元混合乳液在PMMA基板上旋涂,再用环己烷选择性溶去PS粒子得到了超低反射的纳米孔隙膜.改变混合乳液的组成可以调节多孔膜的空隙率,使多层纳米孔隙膜的有效折射率从1.36降低到1.07;调节旋涂速度和成膜乳液的浓度可以控制孔隙膜的厚度.在优化的条件下,在PMMA基板上制备的孔隙膜在波长585nm处的最低反射率仅0.03%、在450～800nm的可见光谱范围内的平均反射率低于0.4%.以本方法制备的纳米孔隙膜有较好的稳定性,在水中用超声波清洗30min后,膜的低反射性能几乎不变.     

Fabrication of organic thin-film transistors using layer-by-layer assembly

Layer-by-layer assembly is presented as a deposition technique for the incorporation of ultrathin gate dielectric layers into thin-film transistors utilizing a highly doped organic active layer. This deposition technique enables the fabrication of device structures with a controllable gate dielectric thickness. In particular, devices with a dielectric layer comprised of poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA) bilayer films were fabricated to examine the properties of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as the transistor active layer. The transistor Ion/off ratio and switching speed are shown to be controlled by the gate bias, which is dependent upon the voltage applied and the number of bilayers deposited for the gate dielectric. The devices operate in the depletion mode as a result of dedoping of the active layer with the application of a positive gate bias. The depletion and recovery rate are highly dependent on the level of hydration in the film and the environment under which the device is operated. These observations are consistent with an electrochemical dedoping of the conducting polymer during operation.     

Polyamide-11/lead zirconate titanates—a novel composite material with high dielectric properties

Polymeric composites gain increasing interest in materials research and practice applications due to combining excellent electric property of piezoelectric ceramic and flexibility of polymer matrix. A novel decoupling capacitor with high dielectric constant has been developed by mixing polyamide-11 (PA11) with ferroelectric ceramic lead zirconate titanates (PZT). The composite demonstrates high dielectric constant, with better frequency stability and low dielectric losses. The dependence of the dielectric constant on frequency and polymer fraction was investigated. The excellent dielectric constant of 100 and the dielectric loss of 0.1 can be obtained at a PA11 volume fraction of 0.4. The enhanced dielectric behavior originates from good connection between ferroelectric ceramic and PA11 Dielectric losses of the PZT/PA11 composites change slightly with the test frequency. Our findings suggest that the created polymeric composites with relatively high dielectric constant represent a novel type of material that is flexible and easy to process. Moreover, is suited to applications in advanced decoupling capacitors and flexible electronics.     

Characterisation and effect of polymer network deformation in reverse-mode polymer-stabilised cholesteric texture

In reverse-mode polymer-stabilised cholesteric texture (PSCT), the dynamic response is derived from local director reorientation governed by dielectric coupling effect/self-assembly and polymer network deformation. A double exponential rise/decay model is proposed to investigate the underlying physical mechanisms. Through simulation of the transient rise and decay processes, the polymer network deformation in PSCT can be quantitatively evaluated. Less deformation and faster restoration speed of the polymer network can suppress hysteresis. These results provide useful guidelines for future PSCT fabrication and performance optimisation.     

Correlation between dielectric/organic interface properties and key electrical parameters in PPV-based OFETs

We report on the influence of the dielectric/organic interface properties on the electrical characteristics of field-effect transistors based on polyphenylenevinylene derivatives. Through a systematic investigation of the most common dielectric surface treatments, a direct correlation of their effect on the field-effect electrical parameters, such as charge carrier mobility, On/Off current ratio, threshold voltage, and current hysteresis, has been established. It is found that the presence of OH groups at the dielectric surface, already known to act as carrier traps for electrons, decreases the hole mobility whereas it does not substantially affect the other electrical characteristics. The treatment of silicon dioxide surfaces with gas phase molecules such as octadecyltrichlorosilane and hexamethyldisilazane leads to an improvement in hole mobility as well as to a decrease in current hysteresis. The effects of a dielectric polymer layer spin coated onto silicon dioxide substrates before deposition of the semiconductor polymer can be related not only to the OH groups density but also to the interaction between the dielectric and the semiconductor molecules. Specifically, the elimination of the OH groups produces the same effect observed with hexamethyldisilazane. The hole mobility values obtained with hexamethyldisilazane and polymer dielectrics are the highest reported to date for PPV-based field-effect transistors.     

Dynamics of water in partially crystallized polymer/water mixtures studied by dielectric spectroscopy

The dielectric relaxation process of water was investigated for polymer/water mixtures containing poly(vinyl methyl ether), poly(ethyleneimine), poly(vinyl alcohol), and poly(vinylpyrrolidone) with a polymer concentration of up to 40 wt % at frequencies between 10 MHz and 10 GHz in subzero temperatures down to -55 degrees C. These polymer/water mixtures have a crystallization temperature TC of water at -10 to -2 degrees C. Below TC, part of the water crystallized and another part of the water, uncrystallized water (UCW), remained in a liquid state with the polymer in an uncrystallized phase. The dielectric relaxation process of UCW was observed, and reliable dielectric relaxation parameters of UCW were obtained at temperatures of -26 to -2 degrees C. At TC, the relaxation strength, relaxation time, and relaxation time distribution change abruptly, and their subsequent changes with decreasing temperature are larger than those above TC. The relaxation strength of UCW decreases, and the relaxation time and dynamic heterogeneity (distribution of relaxation time) increase with decreasing temperature. These large temperature dependences below TC can be explained by the increase in polymer concentration in the uncrystallized phase C(p,UCP) with decreasing temperature. C(p,UCP) is independent of the initial polymer concentration. In contrast to the relaxation times above TC, which vary with the chemical structure of the polymer and its concentration, the relaxation times of UCW are independent of both of them. This indicates that the factor determining whether the water forms ice crystals or stays as UCW is the mobility of the water molecules.     

3D-Graphene/Boron Nitride-stacking Material: a Fundamental van der Waals Heterostructure

The 3D periodic graphene/h-BN(G/BN) heterostuctures were studied. The stacking forms between the graphene and h-BN layers were discussed. The varieties of the geometric and electronic configurations at the interface between graphene and h-BN layers were also reported. The metal-semiconductor transform of the G/BN material can be achieved by adjusting the stacking form of the h-BN layers or changing the proportion of graphene layers in the unit cell. An electrostatic potential well was found at the interface. Due to the potential well and the only dispersion correlation at the interface, the dielectric constant ε_zz in vertical direction was independent on the variety of the thickness or the proportion of the compositions in an unit cell.     

Unveiling of polymer/fullerene blend films morphology by ellipsometrically determined optical order within polymer and fullerene phases

Optical properties of polymer/fullerene blend films upon thermal annealing are investigated by spectroscopic ellipsometry and described consistently within an optical model of the blend film. The optical model developed in this work treats both components, polymer and fullerene, as mixtures of reference materials, that is, their optically ordered and disordered phase. Then, the polymer/fullerene blend layer is also described as a mixture of these two components. In this manner, we extend an existing optical model, which accounts for the optical order within the polymer phases, on cases where the optically ordered PCBM phase occurs, too. Determination of the dielectric functions of all four reference materials allows for a unique quantitative characterization of a polymer/fullerene blend film by assigning to it thickness and the polymer to fullerene volume fraction of its layers as well as corresponding volume fractions of theirs optically ordered and disordered polymer and fullerene phases. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1094–1100     

Electric field induced AC alignment and realignment, a study of a liquid-crystalline copolymer having longitudinally and laterally attached mesogenic groups as side chains monitored through dielectric spectroscopy and optical thermomicroscopy

A study of a liquid crystal side chain copolymer with a siloxane backbone has been carried out using dielectric relaxation spectroscopy and optical microscopy. We have found that this particular copolymer, a mixture of longitudinally and laterally attached mesogens, can be aligned both homeotropically and planarly between two electrodes using a directing AC field of specific frequency by cooling from the melt or more importantly at temperatures below the clearing point (T_c). The switching of the material from homeotropic to planar and the reverse has been studied at temperatures below T_c. It is shown that the kinetics of realignment are strongly dependent on the electrical/thermal history of the sample. The dielectric data allows the state of alignment of the sample to be monitored and the molecular dynamics to be studied. The optical textures of the polymer which were subjected to different AC electric fields have been observed and provide complementary information to the dielectric work on the state of the aligned sample.     

Time-temperature effects in polymer coatings for corrosion protection as analyzed by EIS

More information is contained in Electrochemical Impedance Spectroscopy (EIS) results at steady-state vs. Temperature data sets than just the low frequency limit/polymer coating film resistance data most often cited. We have analyzed various EIS-Temperature data sets for several coating films in immersion and present the results considering the coating film dielectric constant vs. frequency and temperature. Water up-take can be analyzed by these methods and can be used to estimate the role of this process in the failure of corrosion protective coatings. For coating films that have been subjected to cyclic exposure, analysis of the dielectric constant vs. frequency data resulting from EIS data on these films indicate that cyclic exposure contributes significantly to ‘physical aging’ of the coating polymer.     

Role,effect, and influences of micro and nano‐fillers on various properties of polymer matrix composites for microelectronics: A review

Ever since the discovery of polymer composites, its potential has been anticipated for numerous applications in various fields such as microelectronics, automobiles, and industrial applications. In this paper, we review filler reinforced polymer composites for its enormous potential in microelectronic applications. The interface and compatibility between matrix and filler have a significant role in property alteration of a polymer nanocomposites. Ceramic reinforced polymeric nanocomposites are promising candidate dielectric materials for several micro‐ and nano‐electronic devices. Because of its synergistic effect like high thermal conductivity, low thermal expansion, and dielectric constant of ceramic fillers with the polymer matrix, the resultant nanocomposites have high dielectric breakdown strength. The thermal and dielectric properties are discussed in the view of filler alignment techniques and its effect on the composites. Furthermore, the effect of various surface modified filler materials in polymer matrix, concepts of network forming using filler, and benefits of filler alignment are also discussed in this work. As a whole, this review article addresses the overall view to novice researchers on various properties such as thermal and dielectric properties of polymer matrix composites and direction for future research to be carried out.